OEM Boot Loader Output for the Renesas US7750R HARP (Aspen) SDB
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
9/8/2008
Esta é a saída para o carregador inicializar OEM:
Cold Reset 0x0
Aspen SH4 Monitor 5.09
Hitachi Semiconductor (America), Inc.
Little-endian Boot from ROM at Cold Start at 0x00000EE0
DMON>
Se você tipo um ? Na DMON > prompt, você verá o seguinte.
Register
<register name> [<data>] - Set register
R - Display Registers
yzba - Set MAC address
Memory
A <start adr> - Assemble
C <range> <dest adr> - Copy memory
D<type> <range> - Display memory
DA <start addr> - Disassemble
F<type> <range> <data> - Fill Memory
M<type> <start adr> - Modify memory
EF - Erase Flash
Running
B <adr> [<count>] - Set PC breakpoints
B - Display breakpoints
B - [<adr>] - Cancel breakpoints
G [<start adr>] - Go
S [<count> [<start adr>]] - Single Step
SO - Step over
[space to continue help]
Communications
SCCR <value> - Set Cache Control Register
SB 0|1 <rate> - Set baud rate
SC 0|1 - Set console
TM <addr> <mask> - Test all values at address <value>
LE [<offset>|0xAC000000] - Load from ethernet
L [<offset>|0xAC000000] - Load from serial
LP [<offset>|0xAC000000] - Load from parallel
PPSH [<offset>|0xAC000000] - Parallel download from PPSH/CESH
LS - Load status (view)
P [<offset>] - Program flash with data from last Load cmd
SV <range> - Save file
Misc
RS - Reset
ST - Status
BT - Branch Trace
<type> = B | W | L | A
<range> = <addr> @ <length>
| <addr_from> ... <addr_to>
| <addr_from> <val> - length if val <= addr_from
- addr_to if val > addr_from
binary operators: + * / % & | ^, unary operator: ~
[] signifies optional syntax
DMON>