Compartilhar via


Windows 2000 Startup and Logon Traffic Analysis

Microsoft Enterprise Services

For information on Enterprise Services, see https://www.microsoft.com/learning/default.asp

Credits

Greg Molnar - USMCS MidWest

Keith Olinger - USMCS MidWest

David Trulli - Program Manager, Microsoft Enterprise Customer Solutions

Markus Vilcinskas - Program Manager, Microsoft Enterprise Services

On This Page

Introduction
Windows 2000 Component Overview
Description of the Windows 2000 Startup and Logon Process
User Logon
Conclusion
Appendix A: Test Environment
Appendix B: TCP/IP Ports Used in the Authentication Process

Introduction

The client startup and logon process is the process the Microsoft Windows operating systems uses to validate a computer or User in the Windows networking environment. Developing an understanding of the client startup and user logon process is fundamental to understanding Windows 2000 networking. This white paper will provide the reader with detailed information on this process, including:

  • How clients connect to the network with Windows 2000 Dynamic Host Configuration Protocol (DHCP), Automatic Private Internet Protocol (IP) addressing, and static addressing.

  • How Windows 2000 clients use the Dynamic Domain Naming System (DDNS) support in Windows 2000 to locate domain controllers and other servers in the infrastructure needed during startup and logon. In addition we will show how Windows 2000 clients register their names in DDNS.

  • How the Lightweight Directory Access Protocol (LDAP) is used during startup and logon to search the Microsoft Active Directory for required information.

  • How the Kerberos security protocol is used for authentication.

  • How MS Remote Procedure Calls (MSRPC) are used.

  • How Server Message Block (SMB) is used to transfer group policy information and other data during the startup and logon process.

In addition to discussing the Windows 2000 core components used by the startup and logon process, the paper shows what happens and how much network traffic is generated during each part of the process. The discussion begins with an overview of the Windows 2000 components involved in the startup and logon process. We will then examine the Client Startup process and discuss the User logon process.

Throughout the discussion sample information from network monitor traces will be used to illustrate what is happening at that particular point. We have also made an effort to provide references whenever possible to external sources of information where additional information can be found. The most common reference materials cited include:

  • Internet Engineering Task Force (IETF) Requests for Comments (RFCs)

  • Microsoft Windows 2000 Resource Kits

  • Microsoft Support Knowledge Base articles

  • Microsoft Notes from the Field books

  • Various Web sites

Reading and understanding this white paper will allow systems architects and administrators to better engineer and support Windows 2000 networks. It should help network designers determine where to place key components to ensure reliable startup and logon in a Windows 2000 network. Support professionals will be able to use this paper to resolve problems by comparing the baseline information provided here to their environments.

Audience

The target groups for this discussion are systems administrators and network architects who are planning, implementing, or managing Windows 2000 networks. It is expected that this group will have an understanding of the following topics:

  • Microsoft Windows NT or 2000 networking concepts

  • Basic knowledge of the TCP/IP protocol

  • Some exposure to examining network traces

The Windows 2000 Resource Kit, Microsoft TechNet, and the Notes from the Field series offer more detailed discussions of core Windows 2000 services we will discuss as part of the client startup and logon process. It would be worthwhile to have access to these resources as supplementary resources while reading this paper.

Windows 2000 Component Overview

In order to understand the Windows 2000 client startup and logon process, a discussion of the new or updated protocols and services that play a role in this process is needed. This section provides a brief overview of each of the following protocols and services involved:

  • Dynamic Host Configuration Protocol (DHCP)

    Automatic Private IP Addressing

  • Domain Naming System (DNS)

  • Kerberos

  • Lightweight Directory Access Protocol (LDAP)

  • Server Message Block (SMB)

  • Microsoft Remote Procedure Call (MSRPC)

  • Time Service

More in-depth information on each protocol or service can be found using the references provides in each section.

DHCP

The original objective of the Dynamic Host Configuration Protocol was to provide each DHCP client with a valid Transmission Control Protocol/Internet Protocol (TCP/IP) configuration.

The process in general consists of eight messages:

  • DHCPDiscover. A DHCP client uses this message in order to detect at least one DHCP server.

  • DHCPOffer. Each DHCP server that receives the request from a client checks its scopes for a valid configuration set and offers this to the DHCP client.

  • DHCPRequest. The DHCP client requests the first offer it receives from the DHCP server.

  • DHCPAcknowledge. The selected DHCP server uses this message in order to confirm the lease with the DHCP client.

  • DHCPNack. The DHCP server uses this message in order to inform a client that the requested TCP/IP configuration is invalid.

  • DHCPDecline. The DHCP client uses this message in order to inform the server that an offered TCP/IP configuration is invalid.

  • DHCPRelease. The DHCP client uses this message to inform the server that an assigned configuration is no longer in use by the client.

  • DHCPInform. This is a new message defined in Request for Comments (RFC) 2131. If a client has already obtained an Internet Protocol (IP) address (for example, manual configuration), it may use this message to retrieve additional configuration parameters that are related to the IP address from a DHCP server.

This role of a DHCP server was extended with the availability of Dynamic DNS. In this case, the DHCP server can be used for the dynamic registration of the client's IP address and the hostname. In the default configuration, the DHCP server registers the IP address of the client with the DNS server. This is also known as Pointer Record (PTR RR).

w2ksrt01

For more information about DHCP, see:

  • RFC 1541

  • RFC 2131

  • Dynamic Host Configuration Protocol, TCP/IP Core Networking Guide, Windows 2000 Server Resource Kit

Automatic Private IP Addressing

Windows 2000 implements the Automatic Private IP Addressing (APIPA), which will provide an IP address to a DHCP client even if there is no DHCP server available. APIPA is designed for computers on single-subnet networks that do not include a DHCP server. APIPA automatically assigns an IP address from its reserved range, 169.254.0.01 through 169.254.255.254. What this means is that when a client fails to communicate with a local DHCP server at startup to renew its lease, it will use an APIPA assigned address until it can communicate with a DHCP server. This is different behavior from Windows NT 4.0 where the client would continue to lease a lease that had not expired even if the client could no longer contact the DHCP server.

Using the Registry Editor to create the following registry key can disable APIPA:

HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet

Services\Tcpip\Parameters\Interfaces\<adapter name>

Where <adapter name> is the name of the Dynamic Host Configuration Protocol (DHCP) configured adapter where you want to disable APIPA.

Add the following value to this key:

Value name: IPAutoconfigurationEnabled

Value type: REG_DWORD

Value in hexadecimal: 0 (A value of 0 disables APIPA support on this adapter)

Note: If the IPAutoconfigurationEnabled entry is not present, a default value of 1 is assumed, which indicates that APIPA is enabled.

This change requires the computer to be restarted to take effect. It is documented in the articles 244268 and 244268 available at https://search.support.microsoft.com/

DNS

The primary mechanism for service location and name resolution in Windows 2000 is the Domain Name System (DNS). Windows 2000 includes a DNS system that is tightly integrated with the operating system providing integration with the Active Directory and support for making Dynamic updates, but any BIND 8.2.2 compliant DNS can be used with Windows 2000. DNS support in Windows 2000 is intended as a standards-based replacement for the NetBIOS-based Windows Internet Naming Service (WINS), which was the previous service that provided dynamic support for Windows clients. Both services provide the ability for dynamic updating of system names into their databases but WINS is a flat-name space and does not scale as well as DNS. By moving to DNS, Windows 2000 not only conforms to Internet standards, it provides a hierarchical naming system that scales to meet the demands of large networks.

The Windows 2000 startup and logon process uses DNS to locate services like LDAP and Kerberos to retrieve the address of at least one controller and to register its hostname and IP address in DNS zone database.

The Windows 2000 DNS system and its requirements are covered in great detail in the Windows 2000 Resource Kit and the Notes from the Field book Building Enterprise Active Directory Services.

For more information, see:

  • Windows 2000 Resource Kit: Name Resolution in Active Directory, Distributed Systems Guide

  • Windows 2000 Resource Kit: Windows 2000 DNS, TCP/IP Core Networking Guide

  • RFC: 1035, 1036

Kerberos

Kerberos V5 is the default authentication protocol in Windows 2000. Kerberos originated as part of Project Athena at MIT in the late 1980s, and version 5 is described in the IETF RFC 1510.

Kerberos V5 is an authentication protocol. It allows mutual authentication between computers. In other words, it allows computers to identify each other. This is of course, the basis of all security systems. Unless a server is absolutely sure you are who you say you are, how can that server reliably control access to its resources? Once the server has positive identification of who you are, it can then make the determination about whether you are authorized to access the resource.

Kerberos, per se, does not authorize the user to access any resource, although the Microsoft implementation of Kerberos V5 does allow secure delivery of user credentials. (For the specification of the fields involved, see https://www.microsoft.com/technet/archive/interopmigration/mgmt/kerberos.mspx.)

There are six primary Kerberos messages. The six messages are really three types of actions, each of which has a request from a client and a response from the Key Distribution Center (KDC). The first action occurs when the client types in a password. The Kerberos client on the workstation sends an "AS" request to the Authentication Service on the KDC asking the Authentication Service to return a ticket to validate the user is who they say they are. The Authentication Service verifies the client's credentials and sends back a Ticket Granting Ticket (TGT).

The second action is when the client requests access to a service or a resource by sending a TGS request to the Ticket Granting Service (TGS) on the KDC. The Ticket Granting Service returns an individual ticket for the requested service that the client can submit to whatever server holds the service or resource the clients wants.

The third action is when the Kerberos client actually submits the service ticket to the server and requests access to the service or resource. These are the AP messages. In Microsoft's implementation, the access security identifiers (SIDs) are contained in the PAC that is part of the ticket sent to the server. This third action need not have a response by the server unless the client has specifically asked for mutual authentication. If the client has marked this exchange for mutual authentication, the server returns a message to the client that includes an authenticator timestamp. For a typical domain logon, all three of these actions occur before the user is allowed access to the workstation.

For more information about Kerberos on Windows 2000, see https://www.microsoft.com/windows2000/techinfo/howitworks/security/kerberos.asp.

LDAP

Lightweight Directory Access Protocol is a Directory Access Protocol (DAP) designed to allow clients to query, create, update, and delete information stored in a directory. It was initially used as a front-end to X.500 directories, but can also be used with stand-alone directory servers. Windows 2000 supports both LDAP version 3 and version 2.

LDAP Process

The general model adopted by LDAP is of clients performing protocol operations against servers. A client transmits a request describing the operation to be performed to a server. The server is then responsible for performing the necessary operations in the directory. Upon completion of the operations, the server returns a response containing any results or errors to the requesting client.

The LDAP information model is based on the entry, which contains information about some object (for example, a person). Entries are composed of attributes, which have a type and one or more values. Each attribute has a syntax that determines what values are allowed in the attribute and how those values behave during directory operations. Examples of attribute syntaxes are for IA5 (ASCII) strings, URLs, and public keys.

LDAP Features

Windows 2000 supports the LDAPv3 protocol as defined in RFC 2251. Key aspects of the protocol are:

  • All protocol elements of LDAPv2 (RFC 1777) are supported.

  • The protocol is carried directly over TCP or other transport, bypassing much of the session/presentation overhead of X.500 DAP.

  • Most protocol data elements can be encoded as ordinary strings (for example, distinguished names)

  • Referrals to other servers may be returned (described in the next section).

  • Simple Authentication and Security Layer (SASL) mechanisms may be used with LDAP to provide association security services.

  • Attribute values and distinguished names have been internationalized through the use of the International Standards Organization (ISO) 10646 character set.

  • The protocol can be extended to support new operations, and controls may be used to extend existing operations.

LDAP Referral

An LDAP referral is a domain controller's way of indicating to a client application that it does not have a copy of a requested object (or, more precisely, that it does not hold the section of the directory tree where that object would be, if in fact it exists) and giving the client a location that is more likely to hold the object, which the client uses as the basis for a DNS search for a domain controller. Ideally, referrals always reference a domain controller that indeed holds the object. However, it is possible for the referred-to domain controller to generate yet another referral, although it usually does not take long to discover that the object does not exist and to inform the client. Active Directory returns referrals in accordance with RFC 2251.

RootDSE

The rootDSE represents the top of the logical namespace and therefore the top of the LDAP search tree. The attributes of the rootDSE identify both the directory partitions (the domain, schema, and configuration directory partitions) that are specific to one domain controller and the forest root domain directory partition.

The rootDSE publishes information about the LDAP server, including what LDAP version it supports, supported SASL mechanisms, and supported controls, as well as the distinguished name for its subschema subentry.

Clients connect to the rootDSE when making LDAP at the start of an LDAP operation.

LDAP over TCP

LDAP message PDUs (Protocol Data Units) are mapped directly onto the TCP byte stream. RFC 2251 recommends that server implementations provide a protocol listener on the assigned port, 389. The Active Directory uses port 389 as the default port for domain controller communications. In addition, the Active Directory supports port 636 for LDAP Secure Sockets Layer (SSL) communications. A Windows 2000 domain controller that is a Global Catalog (GC) server will listen on port 3268 for LDAP communications and port 3269 for LDAP SSL communications.

LDAP During the Startup and Logon Process

LDAP is used extensively during the Windows 2000 startup and logon process. The client uses LDAP during the domain controller locator process to get the domain controller it will use. LDAP is also used to find the applicable group policy objects for the computer or user. Finally, LDAP is used to locate the appropriate certificates for the client during certificate auto enrollment.

For more information, see:

  • Windows 2000 Resource Kit

  • Windows 2000 Active Directory Technical Reference

  • RFCs 1777, 1778, 1779, 1959, 1960, 1823

  • RFCs 2251-2256

SMB

The Server Message Block protocol is the resource-sharing protocol used by MS-Net, LAN Manager, and Windows Networking. In addition, there are SMB solutions for OS/2, Netware, VMS, and Unix from vendors such as AT&T, HP, SCO, and, via Samba, over 33 others. The SMB protocol is used in a client-server environment to access files, printers, mail slots, named pipes, and application programming interfaces (APIs). It was jointly developed by Microsoft, IBM, and Intel in the mid-1980s. As illustrated by the following chart, SMB will run over multiple network protocols:

Bb742590.w2ksrt02(en-us,TechNet.10).gif

In SMB communication, a client connects to the server by negotiating a dialect. Once the client has established a connection, it can then send commands (SMBs) to the server that allow the client to access resources.

The SMB commands can be generally categorized into four parts:

  • Session Control

  • File Commands

  • Print Commands

  • Message Commands

SMB security has evolved as the platforms that use it have evolved. The base SMB protocol model defines two levels of security:

  • Share level. Protection is applied at the share level on a server. Each share can have a password, and a client needs only that password to access all files under that share. This was the first security model that SMB had and is the only security model available in the Core and CorePlus protocols. Windows for Workgroups vserver.exe implements share level security by default, as does Windows 95.

  • User Level. Protection is applied to individual files in each share and is based on user access rights. Each user (client) must log in to the server and be authenticated by the server. When it is authenticated, the client is given a user ID, which it must present on all subsequent accesses to the server. This model has been available since LAN Manager 1.0.

The SMB protocol has gone through many revisions over time. The most current version of SMB implemented in Windows 2000 is the Common Internet File System (CIFS), which is a slight variant of the NT LM 0.12 version used previously. The next section goes into the details of this modern implementation.

Windows 2000 support for SMB via the CIFS

The Common Internet File System is the standard way that computer users share files across corporate intranets and the Internet in a Windows network. The CIFS is an enhanced version of the SMB protocol. CIFS is an open, cross-platform implementation of SMB that is currently a draft Internet standard. CIFS was introduced in Service Part 3 for Windows NT 4.0 and is the native file sharing protocol for Windows 2000. The CIFS is a variant of the NTLM 0.12 protocol.

Windows 2000 SMB/CIFS Protocol Implementation

CIFS defines a series of commands used to pass information between networked computers. The redirector packages requests meant for remote computers in a CIFS structure. CIFS can be sent over a network to remote devices. The redirector also uses CIFS to make requests to the protocol stack of the local computer. CIFS messages can be broadly classified as follows:

  • Connection establishment messages consist of commands that start and end a redirector connection to a shared resource at the server.

  • Namespace and File Manipulation messages are used by the redirector to gain access to files at the server and to read and write them.

  • Printer messages are used by the redirector to send data to a print queue at a server and to get status information about the print queue.

  • Miscellaneous messages are used by the redirector to write to mail slots and named pipes.

In Windows 2000, CIFS supports distributed replicated virtual volumes (such as Distributed File System [DFS]), file and record locking, file change notification, read-ahead and write-behind operations. CIFS communications are established via standard SMB session and name resolution mechanisms.

The SMB/CIFS Process in Windows 2000

When there is a request to open a shared file, the I/O calls the redirector, which in turn requests the redirector to choose the appropriate transport protocol. For NetBIOS requests, NetBIOS is encapsulated in the IP protocol and transported over the network to appropriate server. The request is passed up to the server, which sends data back to satisfy the request.

In Windows NT 4.0, Windows Internet Name Service (WINS), and Domain Name System (DNS), name resolution was accomplished by using TCP port 134. Extensions to CIFS and NetBT now allow connections directly over TCP/IP with the use of TCP port 445. Both means of resolution are still available in Windows 2000. It is possible to disable either or both of these services in the registry.

SMB Utilization During the Startup and Logon Process

The Windows 2000 client startup and logon process uses SMB to load Group Policy objects applicable to that workstation or user. The basic SMB operation that is observed during the startup and logon process is SMB dialect negotiation. This is an exchange between the client and the server to determine which SMB dialect they will be able to use. SMB will also be used to make a DFS referral for the share that is being accessed. The client loading Group Policy objects will create the majority of SMB traffic during the startup and logon process.

For more information, see:

  • Windows 2000 TCP/IP Protocols and Services Technical Reference

MSRPC

The simplest way to describe an RPC is a request by one computer to use the processing resources on another. The RPC protocol permits one process to request the execution of instructions by another process located on another computer in a network.

The RPC process consists of:

  • Client application. Requests the remote execution.

  • Client stub. Translates calls into/from standard network representation (NDR) format.

  • Client RPC Runtime Library. Converts NDR into network messages

    Network Transport: Handles the network communications.

  • Server RPC Runtime Library. Converts NDR into network messages.

  • Server stub. Translates calls into/from standard network representation (NDR) format.

  • Server application. Executes the requested instructions.

The RPC procedures are uniquely identified by an interface number (UUID), an operation number (opnum), and a version number. The interface number identifies a group of related remote procedures. An example for an interface is net logon, which has the UUID 12345678-1234-ABCD-EF00-01234567CFFB.

An example for an RPC call is:

MSRPC: c/o RPC Bind: UUID 12345678-1234-ABCD-EF00-01234567CFFB  call 0x1  
assoc grp 0x0  xmit 0x16D0  recv 0x16D0
MSRPC: Version = 5 (0x5)
MSRPC: Version (Minor) = 0 (0x0)
MSRPC: Packet Type = Bind
+ MSRPC: Flags 1 = 3 (0x3)
MSRPC: Packed Data Representation
MSRPC: Fragment Length = 72 (0x48)
MSRPC: Authentication Length = 0 (0x0)
MSRPC: Call Identifier = 1 (0x1)
MSRPC: Max Trans Frag Size = 5840 (0x16D0)
MSRPC: Max Recv Frag Size = 5840 (0x16D0)
MSRPC: Assoc Group Identifier = 0 (0x0)
+ MSRPC: Presentation Context List

RPC are independent from the low-level transport protocol. Microsoft RPC (MSRPC) can be layered on top of several different transport protocols such as TCP/IP, Internetwork Packet Exchange/Sequenced Packet Exchange (IPX/SPX), or NetBIOS Enhanced User Interface (NetBEUI).

Most of the RPC interfaces use dynamic ports for the network communication. In this case it is necessary to involve a specific interface, called the End Point Mapper. The End Point Mapper is always listening on port 135 for TCP/IP and the End Point Mapper's UUID is E1AF8308-5D1F-11C9-91A4- 08002B14A0FA.

The client has to bind to an interface first before it can call its procedures. If the bind process was successful, it can send a request to the End Point Mapper, in which it includes the UUID of the target interface. The End Point Mapper sends back the port number the client can use for the communication.

The following table shows the communication sequence for this process.

Frame

Source

Destination

Protocol

Description

1

Client

Server

MSRPC

c/o RPC Bind: UUID E1AF8308-
5D1F-11C9-91A4-08002B14A0FA l

2

Server

Client

MSRPC

c/o RPC Bind Ack: call 0x1 assoc
grp 0xC85D xmit 0x16D0 recv

3

Client

Server

MSRPC

c/o RPC Request: call 0x1 opnum
0x3 context 0x0 hint 0x84

4

Server

Client

MSRPC

c/o RPC Response: call 0x1
context 0x0 hint 0x80 cancels 0x0

It is also possible to encapsulate MSRPCs into SMB. In this case, the client and server are using a handle to a previously opened file in order to exchange data.

The Windows 2000 startup and logon process uses the Netlogon and the Directory Replication Service (DRS) interface. The Netlogon interface is used to establish the secure communications channel between the client and a domain controller in a domain. The Directory Replication Service is primarily used for communication between Domain Controllers and Global Catalog servers. It does, however, provide an interface used during the logon process. The DRS provides a method to convert names into a format that is useable by LDAP.

For more information, see

  • "Active Directory Client Network Traffic," Notes from the Field BuildingEnterprise Active Directory Services

  • "Analyzing Exchange RPC Traffic Over TCP/IP [159298]" on TechNet

Time Service

Windows 2000 includes the W32Time (Windows Time) time service that provides a mechanism for synchronizing system time between Windows 2000 clients in a domain. Time synchronization occurs during the computer startup process.

The following hierarchy is used by systems in the domain to perform time synchronization:

  • All client desktops nominate as their in-bound time partner their authenticating domain controller.

  • All member servers follow the same process as client desktops.

  • All domain controllers in a domain nominate the primary domain controller (PDC) Operations Masters as their in-bound time partner.

  • PDC Operations Masters follow the hierarchy of domains in the selection of their in-bound time partner.

Note: Operations Masters are described in Chapter 7 of the Distributed Systems Guide in the Windows 2000 Server Resource Kit.

For more information, see:

  • 216734 for a description of the time sync process and how to set up an authoritative time source

  • RFC: 1769, 2030

Windows 2000 Domain Authentication Methods

Windows 2000 supports two different authentication methods for domain logons: Kerberos and NTLM. The use of Kerberos as the authentication protocol for Windows 2000 changes the default Windows authentication protocol from NTLM to a protocol that is based on Internet Standards.

The default authentication protocol in Windows 2000 is based on MIT's Kerberos version 5, outlined in RFC 1510. Using Kerberos for authentication fundamentally changes the way security information is exchanged between clients, servers, and domain controllers in the Windows network.

With Kerberos, the client requests what is called a session ticket from the KDC. The session ticket contains information that the server can use to validate the client has the necessary authentication for the server. The client then sends these tickets to authenticate with the resource it is trying to use. Kerberos only provides authentication information from the client to the resource it is trying to access. Kerberos does not provide authorization to access resources; it simply supplies the authorization to the system.

To provide legacy support, Windows 2000 continues to provide support for NTLM authentication. Windows 2000 will use NTLM for authentication when not in a Windows 2000 domain, as a member of a NT 4 domain or workgroup, or when there is a need to access older applications that require NTLM for authentication.

This discussion will focus on the Kerberos authentication protocol and how it is used during the startup and logon process. The startup and logon process using the NTLM protocol is unchanged from Windows NT 4.0 and is covered in detail in Notes from the Field series book Building Enterprise Active Directory Services.

For more information, see:

  • Windows 2000 Resource Kit: Authentication; Distributed Systems Guide

Description of the Windows 2000 Startup and Logon Process

When you think of logon in the Windows environment, you typically think of the process of a user pressing ctrl-alt-delete and entering his or her username and password (credentials) to gain access to a system. These credentials will give users access either to resources on the computer they are working on or if the system is part of a network, these credentials give access to resources on the network such as applications, files, or printers that the user has been authorized to access.

The process that allows users to access resources does not start when the user logs on to the system, but begins well before that when the system is started. In a Windows 2000 domain environment, the computer needs to establish itself as a valid member of a domain before users will be able to logon to that system and access other resources on the network.

The objective of the following sections is to describe the steps that are involved in the Windows 2000 startup and logon process. The NetBIOS over TCP/IP functionality is disabled on all computers to set the focus on network traffic that occurs in an environment that has only Windows 2000 computers.

However, it is possible to configure each computer to be compatible with Windows NT and Windows 95 and Windows 98 clients. A detailed description of the startup and logon traffic that is associated with Windows NTbased clients can be found in the "Active Directory Client Network Traffic" chapter of the Notes from the Field series book Building Enterprise Active Directory Services. The following graphic illustrates the configurations.

Bb742590.w2ksrt03(en-us,TechNet.10).gif

The Computer Startup Process

A computer that is a member of a Windows 2000 domain goes through a startup process that connects it to the domain it is a member of. This startup process allows services on the computer to interact or be interacted with on the network, and more importantly, it is required in order for users to interactively log on. This process flow shows the computer startup process.

Bb742590.w2ksrt04(en-us,TechNet.10).gif

Connecting to a Network

The computer startup process begins when the computer connects to the network and loads the TCP/IP protocol. TCP/IP can be configured to use either static or dynamic configuration. Dynamic configuration means using the DHCP, which is a well-documented technology that is a core component of the Windows Server operating system. Static addressing means that TCP/IP configuration information has been manually configured on the computer. Typically, static addresses are used for resources that do not change very often, such as routers or servers. In the examples in this paper, the only systems that use static addresses are the servers.

The DHCP process generates the following frames on the network when the client connects to the network. The sequence of "Discover," "Offer," "Request," and "ACK" in the first four frames is the DHCP process in action. These four frames generate 1,342 bytes (about 342 bytes per DHCP frame) of network traffic, but this will vary depending upon the number of DHCP options specified. The Reverse ARPs (RARP) in frames 5 through 8 are preformed by the client to ensure the address is not in use by another computer on the network. Each RARP frame creates about 60 bytes of network traffic or around 300 bytes for the address check sequence.

Frame

Source

Destination

Protocol

Description

1

Client

*BROADCAST

DHCP

Discover

2

Server

*BROADCAST

DHCP

Offer

3

Client

*BROADCAST

DHCP

Request

4

Server

*BROADCAST

DHCP

ACK

5

Client

*BROADCAST

ARP_RARP

ARP: Request, Target IP:
10.0.0.100

6

Client

*BROADCAST

ARP_RARP

ARP: Request, Target IP:
10.0.0.100

7

Client

*BROADCAST

ARP_RARP

ARP: Request, Target IP:
10.0.0.100

8

Server

*BROADCAST

ARP_RARP

ARP: Reply, Target IP:
10.0.0.100

It is important to note that if a client already possesses a lease, then it will simply renew the lease with the DHCP server when it restarts. The renewal includes only the Request and Acknowledgement packets shown in the first two frames below. The client still performs the RARP process to ensure its address is not in use.

Frame

Source

Destination

Protocol

Description

1

Client

*BROADCAST

DHCP

Request

2

Server

*BROADCAST

DHCP

ACK

3

Client

*BROADCAST

ARP_RARP

ARP: Request, Target IP:
10.0.0.100

4

Client

*BROADCAST

ARP_RARP

ARP: Request, Target IP:
10.0.0.100

5

Client

*BROADCAST

ARP_RARP

ARP: Request, Target IP:
10.0.0.100

6

Server

*BROADCAST

ARP_RARP

ARP: Reply, Target IP:
10.0.0.100

Domain Controller Detection

A client computer needs to get the latest configuration status during each startup phase. Therefore, it has to locate at least one controller in its domain.

In a Windows 2000 domain, each controller is also an LDAP server. In order to retrieve a list of available controllers, the client can query the DNS for SRV resource records with the name _ldap._tcp.dc._msdcs.DnsDomanName .

The following frames show an example of this.

Frame

Source

Destination

Protocol

Description

1

Client

Server

DNS

0x1:Std Qry for
_ldap._tcp.dc._msdcs.main.local.
of type Srv Loc on class INET
addr.

2

Server

Client

DNS

0x1:Std Qry Resp. for
_ldap._tcp.dc._msdcs.main.local.
of type Srv Loc on class INET
addr

The Windows 2000 domain is an administrative boundary, which is independent from the structure of a given network. The computer in a given environment can be grouped into sites. A site in Windows 2000 is defined as a set of IP subnets connected by fast, reliable connectivity. As a rule of thumb, networks with LAN speed or better are considered fast networks for the purposes of defining a site. A domain can span multiple sites and multiple domains can cover a site.

Bb742590.w2ksrt05(en-us,TechNet.10).gif

The locator service of a client attempts to find the closest site during the startup process and stores the name of the site in the registry. If a client knows which site it belongs to, it can send a query for controllers in its site to the DNS server. The format of such a query is:

_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.DnsDomanName

The following frames show an example of this.

Frame

Source

Destination

Protocol

Description

1

Client

Server

DNS

0x1:Std Qry for _ldap._tcp.Default-
First-Site-
Name._sites.dc._msdcs.dcclab.local. of
type Srv Loc on class INET addr.

2

Server

Client

DNS

0x1:Std Qry Resp. for
_ldap._tcp.Default-First-Site-
Name._sites.dc._msdcs.dcclab.local. of
type Srv Loc on class INET addr.

The DNS query above shows the client looking for the LDAP Service in the "Default-First-Site-Name." Default-First-Site-Name is the default name given to a Windows 2000 domain site when it is created.

The domain controllers registered for a site can be viewed with the Microsoft Management Console DNS snap-in. The following diagram shows a snapshot of the snap-in. The expanded view shows the domain controllers that have registered their Kerberos and LDAP service for a given site.

Bb742590.w2ksrt06(en-us,TechNet.10).gif

If it is possible for the DNS server to locate the requested information, it sends back a list of all known domain controllers in the site.

DNS: Answer section: _ldap._tcp.Site2._sites.dc._msdcs.dcclab.local. of type Srv Loc 
on class INET addr.(2 records present)
DNS: Resource Record: dcclab22.dcclab.local. of type Host Addr on class INET addr.
DNS: Resource Record: dcclab21.dcclab.local. of type Host Addr on class INET addr.

The client randomly picks up one controller for the additional communication process, and it does not distinguish between local or remote subnets because it considers each member of its site as a computer that is reasonably close to the client.

As already mentioned, it is possible to have an influence on the controller selection in form of the site concept. After retrieving a domain controller, the client tries to determine whether the controller is the closest one in form of LDAP queries.

Frame

Source

Destination

Protocol

Description

1

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

2

Server

Client

LDAP

ProtocolOp: SearchResponse (4)

3

Client

Sever

LDAP

ProtocolOp: SearchRequest (3)

4

Server

Client

LDAP

ProtocolOp: SearchResponse (4)

In the query, the client requires a match for attributes such as its:

  • DNS domain name

  • Host name

  • Domain globally unique identifier (GUID)

  • Domain security identifier (SID)

If the controller does have exactly this information in its Active Directory database, it passes back information about itself such as:

  • DomainControllerName

  • DomainControllerAddress

  • DomainControllerAddressType

  • DomainGUID

  • DomainName

  • DNSForestName

  • DCSiteName

  • ClientSiteName

The most important information for the client is the site name. The hex dump of the response from the server will contain only one site name if the client is a member of the controller's site:

00000:  00 A0 C9 F1 A0 00 00 01 02 33 BF E7 08 00 45 00   .  ....3..E.
00010:  00 D4 E9 90 00 00 80 11 00 00 0A 00 00 16 0A 00   ._...........
00020:  00 18 01 85 04 04 00 C0 B6 57 30 84 00 00 00 9C   ......[para]W0...
00030:  02 01 02 64 84 00 00 00 93 04 00 30 84 00 00 00   ...d..."..0...
00040:  8B 30 84 00 00 00 85 04 08 6E 65 74 6C 6F 67 6F   0.....netlogo
00050:  6E 31 84 00 00 00 75 04 73 17 00 00 00 FD 01 00   n1...u.s......
00060:  00 48 44 82 88 4E 79 85 47 A8 CA 16 1D 55 23 B2   .HDNyG..U#
00070:  E0 06 64 63 63 6C 61 62 05 6C 6F 63 61 6C 00 C0   .dcclab.local.
00080:  18 08 64 63 63 6C 61 62 32 32 C0 18 06 44 43 43   ..dcclab22..DCC
00090:  4C 41 42 00 08 44 43 43 4C 41 42 32 32 00 09 44   LAB..DCCLAB22..D
000A0:  43 43 4C 41 42 32 34 24 00 17 44 65 66 61 75 6C   CCLAB24$..Defaul
000B0:  74 2D 46 69 72 73 74 2D 53 69 74 65 2D 4E 61 6D   t-First-Site-Nam
000C0:  65 00 C0 50 05 00 00 00 FF FF FF FF 30 84 00 00   e.P....0..
000D0:  00 10 02 01 02 65 84 00 00 00 07 0A 01 00 04 00   .....e.........
000E0:  04 00                                             .. 

If the client is communicating with a controller that is not in the client's site, the controller will also pass back the name of the client's proper site:

00000:  00 20 78 E0 AA 2B 00 20 78 01 80 69 08 00 45 00   . x+. x.i..E.
00010:  00 C9 FD A8 00 00 7F 11 28 64 0A 00 00 16 0B 00   ....(d......
00020:  00 02 01 85 04 03 00 B5 C8 55 30 84 00 00 00 91   ......U0...'
00030:  02 01 01 64 84 00 00 00 88 04 00 30 84 00 00 00   ...d.....0...
00040:  80 30 84 00 00 00 7A 04 08 6E 65 74 6C 6F 67 6F   0...z..netlogo
00050:  6E 31 84 00 00 00 6A 04 68 17 00 00 00 7D 01 00   n1...j.h....}..
00060:  00 48 44 82 88 4E 79 85 47 A8 CA 16 1D 55 23 B2   .HDNyG..U#
00070:  E0 06 64 63 63 6C 61 62 05 6C 6F 63 61 6C 00 C0   .dcclab.local.
00080:  18 08 64 63 63 6C 61 62 32 32 C0 18 06 44 43 43   ..dcclab22..DCC
00090:  4C 41 42 00 08 44 43 43 4C 41 42 32 32 00 0B 44   LAB..DCCLAB22..D
000A0:  43 43 52 4F 55 54 45 52 32 24 00 05 53 69 74 65   CCROUTER2$..Site
000B0:  32 00 05 53 69 74 65 31 00 05 00 00 00 FF FF FF   2..Site1.....
000C0:  FF 30 84 00 00 00 10 02 01 01 65 84 00 00 00 07   0.......e....
000D0:  0A 01 00 04 00 04 00                              .......         

In this case, the client sends another query to the DNS server asking for the list of controllers in this side. The following table shows an example of this. The client is looking for a domain controller in Site2 and switches to Site1 after the LDAP.

Frame

Source

Destination

Protocol

Description

1

Client

Server

DNS

0x1:Std Qry for
_ldap._tcp.Site2._sites.dc._msdcs.dcc
lab.local.

2

Server

Client

DNS

0x1:Std Qry Resp. for
_ldap._tcp.Site2._sites.dc._msdcs.dcc
lab.local

3

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

4

Server

Client

LDAP

ProtocolOp: SearchResponse (4)

5

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

6

Server

Client

LDAP

ProtocolOp: SearchResponse (4)

7

Client

Server

DNS

DNS 0x2:Std Qry for
_ldap._tcp.Site1._sites.dc._msdcs.dcc
lab.local.

8

Client

Server

DNS

0x2:Std Qry Resp. for
_ldap._tcp.Site1._sites.dc._msdcs.dcc
lab.local

It is not necessary to have a domain controller in each site. Each domain controller checks all sites in a forest and the replication cost. A domain controller registers itself in any site that doesn't have a domain controller for its domain and for which its site has the lowest-cost connection. This process is also known as automatic site coverage. What this means is that clients will use the next domain controller that it has lowest cost to get to.

The default location process of the closest domain controller consists of 10 network packets and creates around 2,000 bytes of traffic.

Frame

Source

Destination

Protocol

Description

1

Client

Server

ARP_RARP

ICMP Echo: From 10.00.00.24 To
10.00.00.22

2

Server

Client

ARP_RARP

ICMP Echo Reply: To 10.00.00.24 From
10.00.00.22 10.0.0.22 10.0.0.24

3

Client

Server

DNS

0x1:Std Qry for _ldap._tcp.Default-
First-Site-
Name._sites.dc._msdcs.dcclab.local.

4

Client

Server

DNS

0x2:Std Qry for _ldap._tcp.Default-
First-Site-
Name._sites.dc._msdcs.dcclab.local.

5

Server

Client

DNS

0x1:Std Qry Resp. for
_ldap._tcp.Default-First-Site-
Name._sites.dc._msdcs.dcclab.

6

Server

Client

DNS

0x2:Std Qry Resp. for
_ldap._tcp.Default-First-Site-
Name._sites.dc._msdcs.dcclab.

7

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

8

Server

Client

LDAP

ProtocolOp: SearchResponse (4)

9

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

10

Server

Client

LDAP

ProtocolOp: SearchResponse (4)

11

Client

Server

ARP_RARP

ICMP Echo: From 10.00.00.24 To
10.00.00.22

12

Client

Server

ARP_RARP

ICMP Echo Reply: To 10.00.00.24 From
10.00.00.22 10.0.0.22 10.0.0.24

More details about the domain locator process can be found in the chapter "Name Resolution in Active Directory" of the Windows 2000 Resource Kit.

Establishing a Secure Channel with the Domain Controller

When the client determines its site and domain controller, it can then create a secure channel with that domain controller. A secure channel is a connection between a domain member and a domain controller established to retrieve domain specific information, to update computer-specific information in the Active Directory, such as the computer password, and to validate the domain membership.

The process starts with a negotiation of the SMB dialect both parties will use. The SMB protocol has undergone many revisions and extensions since its release in 1984. This means the client and the server may not necessarily be using the same SMB dialect. In this case, both sides are Windows 2000, which uses the dialect NTLM 0.12. This dialect allows exchanges to use Unicode. Prior to this, exchanges were made in ASCII. The benefit of Unicode strings is they can include file names, resource names, and user names.

The client proceeds by connecting to the netlogon interface of the target. The End Port Mapper must be involved in this process in order to connect the client with the correct port on the server. Finally, the client sends three calls (NetrServerReqChallenge, NetrServerAuthenticate3, NetrLogonGetdomainInfo) to the interface. This process produces approximately 4,600 bytes of traffic.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

C negotiate, Dialect = NT LM 0.12

2

Server

Client

SMB

R negotiate, Dialect # = 5

3

Client

Server

MSRPC

c/o RPC Bind: UUID E1AF8308-5D1F-
11C9-91A

4

Server

Server

MSRPC

c/o RPC Bind Ack: call 0x1 assoc
grp 0xD52C

5

Client

Server

MSRPC

c/o RPC Request: call 0x1 opnum 0x3
contex

6

Server

Client

MSRPC

c/o RPC Response: call 0x1
context

7

Client

Server

MSRPC

c/o RPC Bind: UUID 12345678-1234-
ABCD-EF0

8

Server

Client

MSRPC

c/o RPC Bind Ack: call 0x1 assoc
grp 0x1C04B

9

Client

Server

R_LOGON

RPC Client call
logon:NetrServerReqChallenge(..)

10

Server

Client

R_LOGON

RPC Server response
logon:NetrServerReqChallenge()

11

Client

Server

R_LOGON

Error: Bad Opcode (Function does not
exist)

12

Server

Server

R_LOGON

Error: Bad Opcode (Function does not
exist)

13

Client

Client

MSRPC

c/o RPC Bind: UUID 12345678-1234-
ABCD-EF0

14

Server

Client

MSRPC

c/o RPC Bind Ack: call 0x3 assoc
grp 0x1C04B

15

Client

Client

R_LOGON

Error: Bad Opcode (Function does not
exist)

16

Server

Client

R_LOGON

Error: Bad Opcode (Function does not
exist)

Note: The current version of Netmon cannot resolve the calls NetrServerAuthenticate3 and NetrLogonGetdomainInfo correctly. In the previous table, these calls are shown as errors with a Bad Opcode.

Important: When an environment is mixed after an upgrade of a Windows NT 4 domain to Windows 2000, it is important to be aware of the following situation. When the only available domain controller for a Windows 2000 client to authenticate with is a Windows NT 4.0 backup domain controller, it will be unable to establish a secure channel. This is by design to increase security. Windows 2000 clients know what type of domain they belong to and will not downgrade their authentication method when setting a secure channel. The following trace sequence shows this scenario. It appears to be identical to the Windows 2000 client in a Windows NT 4.0 domain. The main appears after this because the client was unable to setup a secure channel, thus domain authentication fails.

Kerberos Authentication and Session Creation

After the secure channel has been established, the client will retrieve all necessary tickets to establish an IPC$ session with the controller. Because all Windows 2000 domain controllers are Kerberos Key Distribution Center (KDC), the client tries to detect the closest KDC in the same way it has already done it for the LDAP services.

The first step the client has to perform is the authentication in form of an AS ticket exchange. If this is successfully finished, it requests tickets for the controller (computer name$) and the Kerberos service (krbtgt) that is running on the controller. The packet exchange produces approximately 8 kilobytes (KB). The actual size in a given environment depends on the number of Global and Universal groups that the client is a member of. Each additional group will add about 28 bytes to the total.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

DNS 0x3:Std Qry for
_kerberos._tcp.Default-First-Site-
Name._sites.dc._msdcs.DCCLAB.LOCAL.
of type Srv Loc on class INET

2

Server

Client

SMB

DNS 0x3:Std Qry Resp. for
_kerberos._tcp.Default-First-Site-
Name._sites.dc._msdcs.DCCLAB.LOCAL.
of type Srv Loc on class

3

Client

Server

LDAP

LDAP ProtocolOp: SearchRequest (3)

4

Server

Server

LDAP

LDAP ProtocolOp: SearchResponse (4)

5

Client

Server

Kerberos

Kerberos KRB_AS_REQ (request for
TGT)

6

Server

Client

Kerberos

Kerberos KRB_AS_REP

7

Client

Server

Kerberos

Kerberos KRB_TGS_REQ (request for
DC$)

8

Server

Client

Kerberos

Kerberos KRB_TGS_REP

9

Client

Server

R_LOGON

Kerberos KRB_TGS_REQ (request for
Kerberos Service)

10

Server

Client

R_LOGON

Kerberos KRB_TGS_REP

All the tickets a client has obtained can be viewed with the Kerbtray utility from the Microsoft Resource Kit.

w2ksrt07

Finally, the client can connect to the IPC$ share of the controller, which produces around 3,600 bytes of traffic.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

SMB C session setup & X

2

Server

Client

SMB

SMB R session setup & X

3

Client

Server

SMB

SMB C tree connect & X, Share = \\DCCLAB22.DCCLAB.LOCAL\IPC$

4

Server

Client

SMB

SMB R tree connect & X, Type = IPC$

DFS Referral

The client then makes a Distributed File System (DFS) referral. A DFS referral is the DFS client-server protocol to get DFS-specific information that exists on the server to the client. It occurs whenever necessary. The general referral process is started when the client sends an SMB packet, indicating it is a DFS referral. The server passes this request to the DFS driver to complete the request. Subsequently, any access to network shares could result in a DFS referral request, if the client does not already have information about that share. Windows 2000 is a DFS version 5.0 client. This version allows caching of referrals to a DFS root or link for a (administrator configurable) specific length of time.

When the client starts up, a number of DFS referral requests are made from the client to one of the domain controllers within the client computer's domain that responds to the request. This process is required so that the client will be ready to handle any requests to domain-based DFS shares.

The first two requests serve to initialize the DFS client. The first is used to learn the names of all trusted Windows 2000 domains that could be the accessed by the client. The second is used to obtain a list of domain controller in the domain order by local site first. The names returned contain both the Netbios name and DNS names of the domains.

The third request is made to obtain the actual server path to connect to a sysvol share.

The DFS referral creates a minimum of 394 bytes of traffic. The actual amount of traffic generated will depend on the number of trusted domains and DCs in the local domain returned in the reply.

By default the DFS referral to learn domain configuration is repeated every 15 minutes.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

C transact2 NT Get DFS Referral

2

Server

Client

SMB

R transact2 NT Get DFS Referral (response to
frame 105)

The client then pings and makes an LDAP request to get the domain controller again.

Frame

Source

Destination

Protocol

Description

1

Client

Server

ICMP

Echo: From 10.00.00.100 To 10.00.00.22

2

Server

Client

ICMP

Echo Reply: To 10.00.00.100 From
10.00.00.22

3

Client

Server

UDP

Src Port: Unknown, (1041); Dst Port:
Unknown (389); Length = 209 (0xD1)

4

Server

Client

UDP

Src Port: Unknown, (389); Dst Port: Unknown
(1041); Length = 188 (0xBC)

Name Translation

Each object in the Active Directory has a name. There are different formats for names available, such as the user principal names, distinguished names, and the earlier "domain\user" names from Windows NT. It is not necessary for a name to be a string. In general, everything that uniquely identifies an object can be considered as a name. Depending on the service that needs a name as parameter, it might be necessary to convert a given name from one format into another.

This is the objective of an API called DsCrackNames, which is used to map names from one format to another. Details about this call can be obtained from the Microsoft Developers Network (MSDN). Before a client can call this function, it has to bind a handle to the directory service with DSBind and if the operation is done it has to unbind from the directory with DSUnbind.

The following frames show the network traffic that comes along with the translation process. The entire process produces approximately 6,600 bytes of traffic.

Frame

Source

Destination

Protocol

Description

1

Client

Server

MSRPC

c/o RPC Bind: UUID E1AF8308-5D1F-
11C9-91A4-08002B14A0FA call 0

2

Server

Client

MSRPC

c/o RPC Bind Ack: call 0x1 assoc
grp 0xD52D xmit 0x16D0 recv 0x1

3

Client

Server

MSRPC

c/o RPC Request: call 0x1 opnum 0x3
context 0x0 hint 0x84

4

Server

Client

MSRPC

c/o RPC Response: call 0x1 context
0x0 hint 0x80 cancels 0x0

5

Client

Server

MSRPC

c/o RPC Bind: UUID E3514235-4B06-
11D1-AB04-00C04FC2DCD2 call 0

6

Server

Client

MSRPC

c/o RPC Bind Ack: call 0x1 assoc
grp 0x1C04C xmit 0x16D0 recv 0x

7

Client

Server

MSRPC

c/o RPC Alt-Cont: UUID E3514235-
4B06-11D1-AB04-00C04FC2DCD2 call 0

8

Server

Client

MSRPC

c/o RPC Alt-Cont Rsp: call 0x1
assoc grp 0x1C04C xmit 0x16D0 recv
0x

9

Client

Server

MSRPC

c/o RPC Request: call 0x1 opnum 0x0
context 0x0 hint 0x38

10

Server

Client

MSRPC

c/o RPC Response: call 0x1 context
0x0 hint 0x3C cancels 0x0

11

Client

Server

MSRPC

c/o RPC Request: call 0x2 opnum 0xC
context 0x0 hint 0x6E

12

Server

Client

MSRPC

c/o RPC Response: call 0x2 context
0x0 hint 0xB4 cancels 0x0

13

Client

Server

MSRPC

c/o RPC Request: call 0x3 opnum
0xC context 0x0 hint 0x6E

14

Server

Client

MSRPC

c/o RPC Response: call 0x3 context
0x0 hint 0xAC cancels 0x0

15

Client

Server

MSRPC

c/o RPC Request: call 0x4 opnum 0x1
context 0x0 hint 0x14

16

Server

Client

MSRPC

c/o RPC Response: call 0x4 context
0x0 hint 0x18 cancels 0x0

LDAP RootDSE

The client then requests information from the LDAP RootDSE. The RootDSE is a standard attribute defined in the LDAP 3.0 specification. The RootDSE contains information about the directory server, including its capabilities and configuration. The search response will contain a standard set of information as defined in RFC 2251. One of the items returned with this response is the supported Simple Authentication and Security Layer (SASL) mechanism. In this case it returns GSS-SPNEGO.

Frame

Source

Destination

Protocol

Description

1

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

2

Server

Client

LDAP

ProtocolOp: SearchResponse (4)

3

Client

Server

Kerberos

KRB_TGS_REQ

4

Server

Client

Kerberos

KRB_TGS_REP

5

Client

Server

LDAP

ProtocolOp: BindRequest (0)

6

Server

Client

LDAP

ProtocolOp: BindResponse (1)

Load Group Policy

Next, the computer loads applicable Group Policy objects. The client then completes an RPC call to convert its name to a distinguished name and performs an LDAP lookup for policy information that applies to this particular computer and then loads that information using Server Message Block (SMB).

Policy Search

The following frames show the client performing a binding operation to the LDAP directory. LDAP queries require the client to bind to the Directory Service before making a search for information. At this stage of the client logon process, the client is binding to the Active Directory to make a search for Group Policies that apply to the client. This sequence also shows the client making an LDAP request to determine what Group Policies apply. Each bind operation creates about 1,675 bytes of traffic. The policy search creates about 3,527 bytes of traffic in this case.

Frame

Source

Destination

Protocol

Description

1

Client

Server

LDAP

ProtocolOp: BindRequest (0)

2

Server

Client

LDAP

ProtocolOp: BindResponse (1)

3

Client

Server

LDAP

ProtocolOp: BindRequest (0)

4

Server

Client

LDAP

ProtocolOp: BindResponse (1)

5

Client

Server

TCP

.AP..., len: 173, seq: 978423034-
978423207, ack:3068556899, win:17069,
src: 1048 dst: 389

6

Server

Client

TCP

AP..., len: 294, seq:3068556899-
3068557193, ack: 978423207, win:16081,
src: 389 dst: 1048

7

Client

Server

TCP

....S., len: 0, seq: 978497639-
978497639, ack: 0, win:16384,
src: 1050 dst: 389

8

Server

Client

TCP

.A..S., len: 0, seq:3068641675-
3068641675, ack: 978497640, win:17520,
src: 389 dst: 1050

9

Client

Server

TCP

.A...., len: 0, seq: 978497640-
978497640, ack:3068641676, win:17520,
src: 1050 dst: 389

10

Client

Server

LDAP

ProtocolOp: BindRequest (0)

11

Server

Client

LDAP

ProtocolOp: BindResponse (1)

12

Client

Server

TCP

.AP..., len: 129, seq: 978498933-
978499062, ack:3068642008, win:17188,
src: 1050 dst: 389

13

Server

Client

TCP

.AP..., len: 171, seq:3068642008-
3068642179, ack: 978499062, win:16098,
src: 389 dst: 1050

14

Client

Server

TCP

.AP..., len: 203, seq: 978499062-
978499265, ack:3068642179, win:17017,
src: 1050 dst: 389

15

Server

Client

TCP

.AP..., len: 201, seq:3068642179-
3068642380, ack: 978499265, win:17520,
src: 389 dst: 1050

16

Client

Server

TCP

.AP..., len: 467, seq: 978423207-
978423674, ack:3068557193, win:16775,
src: 1048 dst: 389

17

Server

Client

TCP

.AP..., len: 1273, seq:3068557193-
3068558466, ack: 978423674, win:17520,
src: 389 dst: 1048

After the client determines what policies are applicable, it makes a second DFS referral. This will occur ahead of most attempts by a client in Windows 2000 to connect to a share point.

Policy Load Using SMB

The part completes with the client connecting to the SYSVOL (a standard share point on a domain controller) on the domain controller and downloads its policies generating 1,018 bytes of traffic.

w2ksrt08

This is a very simple configuration, so this number will grow with more sophisticated Group Policy implementations.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

C tree connect & X, Share = \\DCCLAB22.MAIN.LOCAL\SYSVOL

2

Server

Client

SMB

R tree connect & X, Type = _

3

Client

Server

SMB

C NT create & X, File = \main.local\Policies\{31B2F340-016D-
11D2-945F-00C04FB984F9}\gpt.ini

4

Server

Client

SMB

R NT create & X, FID = 0x4000

5

Client

Server

SMB

C read & X, FID = 0x4000, Read 0x1a
at 0x00000000

6

Server

Client

SMB

R read & X, Read 0x1a

Client Certificate AutoEnrollment

Each time Group Policy objects are applied, the client completes the autoenrollment event. The autoenrollment event does the following:

  • Checks the status of the computer's certificates, and if they are not OK, the client autoenrolls the client

  • Downloads the enterprise's certification authority (CA) certificates from the Active Directory enterprise root store (= PKI trust anchors)

  • Downloads certificates of CAs capable of issuing smart card certificates from Active Directory

The client makes a request to get the LDAP RootDSE (see frames above) information and then uses LDAP to complete autoenrollment.

Frame

Source

Destination

Protocol

Description

1

Client

Server

DNS

DNS 0x3:Std Qry for
_ldap._tcp.Site2._sites.dc._msdcs

2

Server

Client

DNS

DNS 0x3:Std Qry Resp. Auth. NS is
dcclab.local.

3

Client

Server

DNS

DNS 0x4:Std Qry for
_ldap._tcp.dc._msdcs.dcclab22.dcc

4

Server

Client

DNS

DNS 0x4:Std Qry Resp. Auth. NS is
dcclab.local. of

5

Client

Server

LDAP

ProtocolOp: BindRequest (0)

6

Server

Client

LDAP

ProtocolOp: BindResponse (1)

7

Client

Server

LDAP

ProtocolOp: BindRequest (0)

8

Server

Client

LDAP

ProtocolOp: BindResponse (1)

9

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

10

Server

Client

LDAP

ProtocolOp: SearchResponse (simple) (5)

11

Client

Server

LDAP

ProtocolOp: UnbindRequest (2)

12

Client

Server

LDAP

ProtocolOp: BindRequest (0)

13

Server

Client

LDAP

ProtocolOp: BindResponse (1)

14

Client

Server

LDAP

ProtocolOp: SearchRequest (3)

15

Server

Client

LDAP

ProtocolOp: SearchResponse (simple) (5)

16

Client

Server

LDAP

ProtocolOp: UnbindRequest (2)

17

Client

Server

LDAP

ProtocolOp: UnbindRequest (2)

Closer examination of frame 3 in the previous frame reveals that this is a request for configuration information about the public key services in the domain. The following example provides a more detailed view of one of the frames.

LDAP: ProtocolOp: SearchRequest (3)
LDAP: ProtocolOp = SearchRequest
LDAP: Base Object = CN=Public Key 
Services,CN=Services,CN=Configuration,DC=dcclab,DC
LDAP: Scope = Single Level
LDAP: Deref Aliases = Never Deref Aliases
LDAP: Size Limit = No Limit
LDAP: Time Limit = 0x00002710
LDAP: Attrs Only = 0 (0x0)
LDAP: Filter Type = Equality Match
LDAP: Attribute Type = cn
LDAP: Attribute Value = NTAuthCertificates
LDAP: Attribute Value = cACertificate

Time Synchronization

Next, the client updates its time with its authenticating domain controller. The following set of frames shows the time synchronization process. Notice that this occurs on port 123. This sequence creates 220 bytes of network traffic.

Frame

Source

Destination

Protocol

Description

1

Client

Server

NTP

Src Port: Unknown, (1051); Dst Port: Network Time Protocol (123); Length = 76 (0x4C)

2

Server

Client

NTP

Src Port: Network Time Protocol, (123); Dst Port: Unknown (1051); Length = 76 (0x4C)

Dynamic Domain Name System Update

The last part of the startup process is for the client to perform its name update in the DNS database. The Windows 2000 dynamic DNS update is based on RFC 2136. This process is based on RFC 2136.

The client first determines whether the DNS server has the authority for the client's zone. This sequence creates 225 bytes of traffic.

Frame

Source

Destination

Protocol

Description

1

Client

Server

DNS

0x1:Std Qry for dcclab24.main.local.
of type SOA on class INET addr.

2

Server

Client

DNS

0x1:Std Qry Resp. Auth. NS is
main.local. of type SOA on class
INET addr. : Name does not exist

Next, the client makes the dynamic update of its name in the DNS server. This creates about 1,800 bytes of traffic if the client has to update both (A RR and PTR RR).

Frame

Source

Destination

Protocol

Description

1

Client

Server

DNS

DNS 0x4:Dyn Upd PRE records to
dcclab24.dcclab.local.

2

Server

Client

DNS

241 99.703125 00010233BFE7 INTEL
F1A000 DNS 0x4:Dyn Upd Resp. PRE
records to dcclab24.dcclab

3

Client

Server

DNS

DNS 0x5:Std Qry for 0.0.10.in-
addr.arpa. of type SOA

4

Server

Client

DNS

0x5:Std Qry Resp. for 0.0.10.in-addr.arpa. of type SOA

5

Client

Server

DNS

0x6:Dyn Upd PRE/UPD records to 24.0.0.10.in-
addr.arpa

6

Server

Client

DNS

0x6:Dyn Upd Resp. PRE/UPD records to
24.0.0.10.in-addr.arpa

The actual size of the packets for the dynamic update depends on many conditions. First of all, it depends on whether the client was already registered. Next, it depends in whether there is a conflict with an already registered entry. Another aspect for the client traffic is whether DHCP is in use. The default configuration in this scenario is that the client is updating its A RR, whereas the DHCP server is responsible for the PTR RR.

Last but not least, is the traffic also depending on the configuration of the DNS server and how the secure dynamic update behavior is configured.

Note: If DDNS is not being used in the environment, you should consider turning off the client's ability to make dynamic updates. Turning this off will save the network traffic generated by the unneeded attempts to make the update by the client in an environment that does not support it. This feature is turned off in the advanced TCP/IP properties for the particular network connection. The location is shown in the following illustration:

Bb742590.w2ksrt09(en-us,TechNet.10).gif

Completion

The computer startup sequence is completed with the client breaking down its open connections to the domain controller in a sequence similar to the one illustrated in the following table. This creates 473 bytes of traffic.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

C tree disconnect

2

Server

Client

SMB

R tree disconnect

3

Client

Server

SMB

C tree disconnect

4

Server

Client

SMB

R tree disconnect

5

Client

Server

SMB

C logoff & X

6

Server

Client

SMB

R logoff & X

This traffic sequence is useful to help determine the break between the computer startup and a user logon in a network trace. The system is now available for use. The system display will show the Ctrl-Alt-Delete screen.

User Logon

Overview

After the system startup is complete, the Ctrl-Alt-Delete screen appears on the console. A user will be able to make a domain logon from this system. Pressing Ctrl-Alt-Delete and entering a valid set of domain user credentials (user name and password) initiates the interactive client logon process that ends with the Windows NT shell being loaded and the user being able to interactively use the systems. It is important to note that the user logon process is essentially an abbreviated version of the computer startup process using a subset of the processes described previously. The following diagram shows this process.

w2ksrt10

Logon Flow

User Identification

Windows 2000 provides three ways for a user to enter account information at logon. The first method is to use the Security Accounts Manager (SAM) account name and select the domain. This is the default method for logon. The second method is to use the fully qualified name, which would appear as <user>@<domain-org-company-com>. The third alternative is use the User Principle Name (UPN), which is described in the Windows 2000 Resource Kit as follows:

A user principal name (UPN) is an e-mail-like name that uniquely represents a user. A UPN consists of two parts, a user identification portion and a domain portion. The two parts are separated by an "@" symbol, to form <user>@<DNS-domain-name>, for example, liz@noam.reskit.com. Every user is automatically assigned a default UPN, where the <user> portion of the name is the same as the user's logon name, and the <DNS-domain-name> portion of the name is the DNS name of the Active Directory domain where the user account is located. When logging on using a UPN, users no longer have to choose a domain from a list on the logon dialog box.

You can set UPNs to arbitrary values. For example, even if Liz's account is in the noam.reskit.com domain, her UPN could be set to liz@reskit.com. When the user logs on, the user account to be validated is discovered by searching the global catalog for a user account with a matching UPN value. By making UPN values independent from domain names, administrators can move user accounts between domains, leaving UPN values unchanged and making interdomain moves more transparent to users."

UPN names are resolved to a user and domain by performing a domain controller lookup of the Global Catalog (GC). UPN logon is only supported when the domain is in Native Mode.

Kerberos Authentication for User Logon

The user logon operation generates a Kerberos Authentication request to get its session ticket. Then logon process then requests a session key for a service from the KDC via the Ticket Granting Service.

Frame

Source

Destination

Protocol

Description

1

Client

Server

Kerberos

KRB_AS_REQ

2

Server

Client

Kerberos

KRB_AS_REP

3

Client

Server

Kerberos

KRB_TGS_REQ

4

Server

Client

Kerberos

KRB_TGS_REP

The logon process requests the following tickets during the user logon process:

  • Kerberos: Server Name = <clientname>$

  • Kerberos: Server Name = <dc name>$

  • Kerberos: Server Name = krbtgt.<dns domain name>

  • Kerberos: Server Name = ldap.<dc name>.<dns domain name>

As mentioned earlier, the size of the Kerberos packets depends on the number of groups a user is a member of.

Group Policy Load

The process of retrieving Group Policy information is the same as previously described in the computer startup section. The client uses the "DS API DSCrackNames" to perform a name translation and retrieves the information about the policies to load via LDAP.

Bb742590.w2ksrt11(en-us,TechNet.10).gif

The client then establishes an SMB connection to the controller and downloads the necessary policy files.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

C negotiate, Dialect = NT LM 0.12

2

Server

Client

SMB

R negotiate, Dialect # = 5

3

Client

Server

SMB

C session setup & X

4

Server

Client

SMB

R session setup & X

5

Client

Server

SMB

C tree connect & X, Share = \\DCCLAB22.MAIN.LOCAL\SYSVOL

6

Server

Client

SMB

R tree connect & X, Type = _

7

Client

Server

SMB

C NT create & X, File = \main.local\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini

8

Server

Client

SMB

R NT create & X

9

Client

Server

SMB

C read & X, FID = 0x8005, Read 0x1a at 0x00000000

10

Server

Client

SMB

R read & X, Read 0x1a

This sequence shows the client connecting to the system volume and loading the user's policy. Information on the traffic generated by the loading of group policy information can be found in Chapter 5 of the Microsoft Press book Building Enterprise Active Directory Services, in the Notes from the Field series.

Completion

The client then closes its connection to the domain controller. This happens on Port 445. It is represented in the trace like the following table.

Frame

Source

Destination

Protocol

Description

1

Client

Server

SMB

SMB C tree disconnect

2

Server

Client

SMB

SMB R tree disconnect

3

Client

Server

SMB

SMB C logoff & X

4

Server

Client

SMB

SMB R logoff & X

The user has now logged on. The following table shows a summary of the network traffic for a user logon.

Protocol

Frames

Bytes Claimed

SMB

16

3070

ICMP

4

114

UDP

12

96

NBT

17

1164

TCP

86

6019

MSRPC

16

3872

LDAP

4

3226

Kerberos

12

14229

Note: Please keep in mind that the traffic in the previous table represents a user who is just a member of the default groups and that no specific Group Policies were set.

Conclusion

We have now provided a detailed examination of the Windows 2000 computer startup and user logon process. As stated in the introduction, understanding this process will assist with both infrastructure design and systems administration in Windows 2000 networks.

This document covers a great deal of material and should probably be read multiple times to fully understand and kept handy as a reference.

To help cement your understanding of the concepts described in the paper, I would suggest setting up a test environment and using network monitor to make some traces of the process. Use this document as a reference when examining the traces to understand what is happening at each point.

Questions and comments can be directed to gmolnar@microsoft.com

Appendix A: Test Environment

The following system configurations were used to validate the Windows 2000 startup and logon process.

Environment

Server

Client

Windows 2000

1 Windows 2000 domain controller in Domain Main.Local running
DNS
DHCP
WINS

1 Windows 2000 Professional Desktop
1 Windows 2000 Professional Notebook

NT 4

1 NT 4 SP6a domain controller running
DHCP
WINS

1 Windows 2000 Professional Desktop

Mixed

1 upgraded Windows 2000 domain controller running
DNS
DHCP
WINS
1 NT 4.0 SP6a BDC

1 Windows 2000 Professional Desktop

Forest

1 Windows 2000 Server Domain Controller in Domain Corp.Main.Local running:
DNS
DHCP
2 Windows 2000 Servers configured as RRAS routers using a Null Modem Cable to simulate a slow link
1 Windows 2000 Domain Controller in Domain Field.Main.Local
1 Windows 2000 Domain Controller in Domain Field.Main.Local running:
DNS (Secondary)
DHCP

1 Windows 2000 Professional Desktop in Domain Corp.Main.Local
1 Windows 2000 Professional Desktop in Domain Field.Main.Local

All computers (except where noted) were networked using a 10/100 Ethernet hub. The clients used various Ethernet cards. All clients were connected to the network at 100 MB.

All network traces were made using Network Monitor v5.00.646. A parser for Kerberos traffic was added to Network Monitor.

All network tests and configurations discussed in this document use the TCP/IP transport protocol. TCP/IP is the default network protocol for Windows 2000 and many of the services that logon and startup use require TCP/IP.

Appendix B: TCP/IP Ports Used in the Authentication Process

The following table is a comprehensive list of ports used by Windows.

Port

TCP/UDP

Function Description

20

TCP

FTP

21

TCP

FTP

23

TCP

Telnet

25

TCP

IIS SMTP

31

TCP

Netmeeting

42

TCP

WINS Replication

52

TCP

Netmeeting

53

UDP

DNS Name Resolution
SQL TCP lookup

53

TCP

DNS
SQL TCP lookup

67

UDP

DHCP Lease (BOOTP)

68

UDP

DHCP Lease

80

TCP

IIS HTTP

88

UDP

Kerberos

88

TCP

Kerberos

110

TCP

POP3

119

TCP

NNTP

135

TCP

Location Service
RPC
RPC EP Mapper
SQL RPC session mapper
WINS Manager
DHCP Manager
MS DTC

137

UDP

NetBIOS Name Service
SQL RPC Lookup
Logon Sequence
NT 4.0 Trusts
NT 4.0 Secure Channel
Pass Through Validation
Browsing
Printing
SQL Named Pipes lookup

137

TCP

WINS Registration

138

UDP

NetBIOS Datagram Service
Logon Sequence
NT 4.0 Trusts
NT 4.0 Directory Replication
NT 4.0 Secure Channel
Pass Through Validation
NetLogon
Browsing
Printing

139

TCP

NetBIOS Session Service
NBT
SMB
File Sharing
Printing
SQL Named Pipes session
Logon Sequence
NT 4.0 Trusts
NT 4.0 Directory Replication
NT 4.0 Secure Channel
Pass Through Validation
NT 4.0 Administration Tools (Server Manager, User Manager, Event Viewer, Registry Editor, Diagnostics, Performance Monitor, DNS Administration)

161

UDP

SNMP

162

UDP

SNMP Trap

215

TCP

Netmeeting

389

TCP

LDAP

443

TCP

HTTP SSL

445

TCP

SMB or CIFS

464

UDP

Kerberos kpasswd

500

UDP

IPSEC isakmp IKE

531

TCP

IRC

560

TCP

Content Replication Service Site Server

636

 

LDAP over SSL

731

TCP

Netmeeting

Dynamic

UDP

Netmeeting

888

TCP

Login and Environment Passing

Dynamic

TCP

Directory Replication

1109

TCP

POP with Kerberos

1433

TCP

SQL TCP session

1645

UDP

RADIUS Authentication

1646

UDP

RADIUS Accounting

1723

TCP

PPTP Control Channel (IP Protocol 47 GRE)

1755

TCP

Netshow

Dynamic

UDP

Netshow

1812

UDP

RADIUS Authentication

1813

UDP

RADIUS Accounting

1863

TCP

MSN Messenger

2053

TCP

Kerberos de-multiplexor

2105

TCP

Kerberos encrypted rlogin

3268

 

Global Catalog LDAP

3269

 

Global Catalog LDAP over SSL

3389

RDP

Terminal Services

8000

TCP

CyberCash (credit gateway)

8001

TCP

CyberCash (admin)

8002

TCP

CyberCash (coin gateway)

10140-10179

TCP

DCOM port range

For all the ports on Windows NT, look on your local computer:

%winnt%/system32/drivers/etc/services

The following table lists common ports.

Authentication Authentication services verify the identity of a user or device requesting access to a resource.

 

SERVICE

TYPE

 

AFS/Kerberos authentication service

TCP Port 7004 - afs3-kaserver

 

AFS/Kerberos authentication service

UDP Port 7004 - afs3-kaserver

 

Authentication Service

TCP Port 113 - ident

 

Authentication Service

UDP Port 113 - ident

 

Certificate Distribution Center

TCP Port 223 - cdc

 

Certificate Distribution Center

UDP Port 223 - cdc

 

Funk Software Inc.

TCP Port 1505 - funkproxy

 

Funk Software Inc.

UDP Port 1505 - funkproxy

 

Login Host Protocol (TACACS)

TCP Port 49 - bbn-login

 

Login Host Protocol (TACACS)

UDP Port 49 - bbn-login

 

TACACS-Database Service

TCP Port 65 - tacacs-ds

 

TACACS-Database Service

UDP Port 65 - tacacs-ds

Directory Service/Name Resolution Directory Services provide name resolution and lookup capabilities, allowing users or devices to locate resources on the network by human readable or well-known names.

 

SERVICE

TYPE

 

AppleTalk Name Binding

TCP Port 202 - at-nbp

 

AppleTalk Name Binding

UDP Port 202 - at-nbp

 

Directory Location Service

TCP Port 197 - dls

 

Directory Location Service

UDP Port 197 - dls

 

Directory Location Service Monitor

TCP Port 198 - dls-mon

 

Directory Location Service Monitor

UDP Port 198 - dls-mon

 

Lightweight Directory Access Protocol

TCP Port 389 - ldap

 

Lightweight Directory Access Protocol

UDP Port 389 - ldap

 

Microsoft-DS

TCP Port 445 - microsoft-ds

 

Microsoft-DS

UDP Port 445 - microsoft-ds

 

Microsoft's Windows Internet Name Service

TCP Port 1512 - wins

 

Microsoft's Windows Internet Name Service

UDP Port 1512 - wins

 

NETBIOS Name Service

TCP Port 137 - netbios-ns

 

NETBIOS Name Service

UDP Port 137 - netbios-ns

 

NIC Host Name Server

TCP Port 101 - hostnames

 

NIC Host Name Server

UDP Port 101 - hostnames

 

Prospero Directory Service non-priv

TCP Port 1525 - prospero-np

 

Prospero Directory Service non-priv

UDP Port 1525 - prospero-np

 

Domain Name Server

TCP Port 53 - domain

 

Domain Name Server

UDP Port 53 - domain

 

Host Name Server

TCP Port 42 - nameserver

 

Host Name Server

UDP Port 42 - nameserver

 

HOSTS2 Name Server

TCP Port 81 - hosts2-ns

 

HOSTS2 Name Server

UDP Port 81 - hosts2-ns

 

streettalk

TCP Port 566 - streettalk

 

streettalk

UDP Port 566 - streettalk

Encryption

 

SERVICE

TYPE

 

Kerberos

TCP Port 750 - kerberos-sec

 

Kerberos

TCP Port 751 - kerberos_master

 

Kerberos

TCP Port 88 - kerberos

 

Kerberos

UDP Port 750 - kerberos-sec

 

Kerberos

UDP Port 751 - kerberos_master

 

Kerberos

UDP Port 88 - kerberos

 

kerberos administration

TCP Port 749 - kerberos-adm

 

kerberos administration

UDP Port 749 - kerberos-adm

 

Kerberos Key Distribution Center

Windows NT Service - Kerberos Key Distribution Center

 

kerberos-master

TCP Port 751 - kerberos-master

Remote Access/VPN Remote Access & VPN services allow users or devices to access remote networks as though they had local connections to that network. This is different from Remote Control Software where users actually assume control of a host on a remote network.

 

SERVICE

TYPE

 

any private dial out service

TCP Port 75 -

 

any private dial out service

UDP Port 75 -

 

Apple Remote Access Protocol

TCP Port 3454 - mira

 

IPSEC driver

Windows NT Service - IPSEC driver

 

pptp

TCP Port 1723 - PPTP

 

Routing and Remote Access

Windows NT Service - Routing and Remote Access

 

Shiva

TCP Port 1502 - shivadiscovery

 

Shiva

UDP Port 1502 - shivadiscovery

 

TIA/EIA/IS-99 modem server

TCP Port 380 - is99s

 

TIA/EIA/IS-99 modem server

UDP Port 380 - is99s

Routing Routing protocols allow for the transmission of information between networks. TCP/IP is omitted from this list as it is assumed to be running on all hosts on the network. Protocols other than TCP/IP are important to note as they may indicate extranet support for different types of client operating systems and/or network configurations.

 

SERVICE

TYPE

 

AppleTalk Protocol

Windows NT Service - AppleTalk Protocol

 

AppleTalk Routing Maintenance

TCP Port 201 - at-rtmp

 

AppleTalk Routing Maintenance

UDP Port 201 - at-rtmp

 

Appletalk Update-Based Routing Pro.

TCP Port 387 - aurp

 

Appletalk Update-Based Routing Pro.

UDP Port 387 - aurp

 

AppleTalk Zone Information

TCP Port 206 - at-zis

 

AppleTalk Zone Information

UDP Port 206 - at-zis

 

Border Gateway Protocol

TCP Port 179 - bgp

 

Border Gateway Protocol

UDP Port 179 - bgp

 

IPX

TCP Port 213 - ipx

 

IPX

UDP Port 213 - ipx

 

Local routing process (on site)

UDP Port 520 - router