Compartilhar via

Configure the RRAS Multitenant Gateway Hyper-V Host

  • Artigo

 

You can use this topic to configure a Hyper-V host with Network Virtualization settings and a virtual machine (VM) that will be the Remote Access Multitenant Gateway.

Important

Before you run the script that is provided in this topic, you must install Hyper-V on the host computer. To install Hyper-V and restart the computer, open Windows PowerShell with Administrator privileges and run the following commands.

## Install Hyper-V ##
get-windowsfeature *hyper* | install-windowsfeature

## Restart the computer immediately ##
shutdown /r /t 0

This topic contains the following sections.

Windows PowerShell script explanation

In the first section of the script, named “Macros for Multitenant (MT) Cloud Gateway (GW),” macros are used to define variables that are used throughout the script within the Windows PowerShell commands. For example, the following macro defines the name of the VM MTCloudGW:

$CloudGW_VM_Name = "MTCloudGW"

In script commands, the actual VM name of “MTCloudGW” is not used; instead the macro name is used, “$CloudGW_VM_Name.” If needed, this allows you to change the values of macros one time rather than changing actual values throughout an entire script.

Ensure that you review all of the macro values in this section so that they are appropriate for your deployment.

In the second section of the script, “Create virtual switch, VM, and routing domain mappings,” a new virtual switch is created, and the MT GW VM is created with 4 GB RAM and connected to the virtual switch. In addition, routing domain mappings for the Contoso and Fabrikam tenants are defined.

In the third section of the script, named “Cleanup Cloud-VM Host,” any existing Network Virtualization settings are removed from the Hyper-V host, including Network Virtualization Lookup Records, Network Virtualization Customer Routes, and Network Virtualization Provider Addresses. Cleanup is verified by using the Get commands.

In the fourth section of the script, named “Configure MTCloudGW Hyper-V Host,” Network Virtualization Lookup Records, Network Virtualization Customer Routes, and Network Virtualization Provider Addresses are created for both tenants.

Full Windows PowerShell script

Following is the full script that you can run on the Hyper-V host to configure the host with Network Virtualization and two VM networks with two VMS per VM network.

To run this script on a Hyper-V host

  1. Change the example company names, Contoso and Fabrikam, to names of your actual tenants.

  2. Change other parameter values to match your deployment requirements and environment.

  3. Ensure that the value for the macro $CloudNIC matches the name of a network adapter on the Hyper-V host. If it doesn’t, creation of the virtual switch and VM will fail when you run this script. If you want to change the name of an existing network adapter to the new name CloudNic to match the script, you can run the following Windows PowerShell command after adding values that match your network adapter configuration.

    Rename-NetAdapter [-Name] <String[]> [-NewName] CloudNic

  4. Determine the Provider Addresses, Customer Addresses, Virtual Subnet ID’s, and other values that you prefer to use. You can keep the values in the script or you can change them to suit your deployment.

  5. If you change any values in this script or the other scripts provided in this document, ensure that the values are changed in all of the scripts. For example, if you want to change the tenant name Contoso to the name Woodgrove (or to the name of one of your actual tenants), ensure that you change Contoso to Woodgrove in all scripts before running them.

  6. Copy the Windows PowerShell script below to the Multitenant Gateway Hyper-V host.

  7. On the Hyper-V host, open Windows PowerShell with Administrator privileges. Run the script by typing the folder location and file name of the script. For example, if the file name of the script is MTGWHostConfig.ps1 and the folder location is C:\Users\Administrator\Documents, type C:\Users\Administrator\Documents\MTGWHostConfig.ps1, and then press ENTER.

##### Macros for Multitenant (MT) Cloud Gateway (GW) Hyper-V Host Configuration #####

$CloudGW_VM_Name = "MTCloudGW"
$VHDPath = "C:\VMs\MTCloudGW\MTCloudGW.vhd"
$SwitchName = "CloudSwitch"

$CloudNIC = "CloudNic"

$Cloud_GW_ProviderAddress = "192.168.0.11"
$Cloud_VM_ProviderAddress = "192.168.0.22"

$Contoso_CloudGW_IP = "10.0.2.2"
$Fabrikam_CloudGW_IP = "10.0.2.2"
$Contoso_CloudGW_DefaultGW = "10.0.2.1"
$Fabrikam_CloudGW_DefaultGW = "10.0.2.1"

$Contoso_CloudGW_Subnet = "10.0.2.0/24"
$Fabrikam_CloudGW_Subnet = "10.0.2.0/24"

$Contoso_CloudVM_IP = "10.0.1.101"
$Contoso_CloudVM2_IP = "10.0.1.111"
$Fabrikam_CloudVM_IP = "10.0.1.101"
$Fabrikam_CloudVM2_IP = "10.0.1.111"
$Contoso_CloudVM_DefaultGW = "10.0.1.1"
$Fabrikam_CloudVM_DefaultGW = "10.0.1.1"

$Contoso_CloudVM_Subnet = "10.0.1.0/24"
$Fabrikam_CloudVM_Subnet = "10.0.1.0/24"

$ContosoVMNicMac = "00155DE2AB00"
$ContosoVM2NicMac = "00155DE2AB01"
$ContosoDefaultNicMac = "001122334455"
$ContosoRoutinGDomainGuid = "{12345678-1000-2000-3000-123456780001}"
$ContosoVSID_GW = "6001"
$ContosoVSID_VM = "6000"

$FabrikamVMNicMac = "00155DE2AB02"
$FabrikamVM2NicMac = "00155DE2AB03"
$FabrikamDefaultNicMac = "001122334466"
$FabrikamRoutinGDomainGuid = "{12345678-1000-2000-3000-123456780002}"
$FabrikamVSID_GW = "7001"
$FabrikamVSID_VM = "7000"


##### Create virtual switch, VM, and routing domain mappings #####

New-VMSwitch $SwitchName -NetAdapterName $CloudNIC -AllowManagementOS $false

New-VM $CloudGW_VM_Name -MemoryStartupBytes 4GB -VHDPath $VHDPath -SwitchName $SwitchName

Rename-VMNetworkAdapter -VMName $CloudGW_VM_Name -Name "Network Adapter" -NewName "CloudNic"
Set-VmNetworkAdapterIsolation –VMName $CloudGW_VM_Name –VMNetworkAdapterName “CloudNic” –MultiTenantStack on –IsolationMode NativeVirtualSubnet

Add-VmNetworkAdapterRoutingDomainMapping -VMName $CloudGW_VM_Name -VMNetworkAdapterName "CloudNic" -RoutingDomainId $ContosoRoutinGDomainGuid  -RoutingDomainName "ContosoTenant" -IsolationId $ContosoVSID_GW -IsolationName "ContosoGWSubnet"
Add-VmNetworkAdapterRoutingDomainMapping -VMName $CloudGW_VM_Name -VMNetworkAdapterName "CloudNic" -RoutingDomainId $FabrikamRoutinGDomainGuid  -RoutingDomainName "FabrikamTenant" -IsolationId $FabrikamVSID_GW -IsolationName "FabrikamGWSubnet"

##### Cleanup MTCloudGW Hyper-V Host #####

Remove-NetVirtualizationCustomerRoute
Remove-NetVirtualizationLookupRecord
Remove-NetVirtualizationProviderAddress

Get-NetVirtualizationCustomerRoute
Get-NetVirtualizationLookupRecord
Get-NetVirtualizationProviderAddress

##### Configure MTCloudGW Hyper-V Host #####

#### Provider Address Configuration ####

$MTNic = Get-NetAdapter $CloudNIC
New-NetVirtualizationProviderAddress -ProviderAddress $Cloud_GW_ProviderAddress -InterfaceIndex $MTNic.InterfaceIndex -PrefixLength 24

#### Lookup and Customer Records Configuration ####

$MTVMNic = Get-VMNetworkAdapter -VMName "MTCloudGW" -Name "CloudNic"
$MTNicMac = $MTVMNic.MacAddress

## Contoso Tenant lookup record configuration ##

New-NetVirtualizationLookupRecord -CustomerAddress $Contoso_CloudGW_IP -VirtualSubnetID $ContosoVSID_GW -MACAddress $MTNicMac -ProviderAddress $Cloud_GW_ProviderAddress -Rule "TranslationMethodEncap" -Context "ContosoSubnet"
New-NetVirtualizationLookupRecord -CustomerAddress $Contoso_CloudGW_DefaultGW -VirtualSubnetID $ContosoVSID_GW -MACAddress $ContosoDefaultNicMac -ProviderAddress $Cloud_GW_ProviderAddress -Rule "TranslationMethodEncap" -Context "ContosoDefaultGW"
New-NetVirtualizationLookupRecord -CustomerAddress 0.0.0.0 -VirtualSubnetID $ContosoVSID_GW -MACAddress $MTNicMac -ProviderAddress $Cloud_GW_ProviderAddress -Rule "TranslationMethodEncap" -Context "ContosoWildcard" -Type "GatewayWildcard"
New-NetVirtualizationLookupRecord -CustomerAddress $Contoso_CloudVM_IP -VirtualSubnetID $ContosoVSID_VM -MACAddress $ContosoVMNicMac -ProviderAddress $Cloud_VM_ProviderAddress -Rule "TranslationMethodEncap" -Context "ContosoVM1"
New-NetVirtualizationLookupRecord -CustomerAddress $Contoso_CloudVM2_IP -VirtualSubnetID $ContosoVSID_VM -MACAddress $ContosoVM2NicMac -ProviderAddress $Cloud_VM_ProviderAddress -Rule "TranslationMethodEncap" -Context "ContosoVM2"

New-NetVirtualizationCustomerRoute -RoutingDomainID $ContosoRoutinGDomainGuid -VirtualSubnetID $ContosoVSID_GW -DestinationPrefix $Contoso_CloudGW_Subnet -NextHop 0.0.0.0
New-NetVirtualizationCustomerRoute -RoutingDomainID $ContosoRoutinGDomainGuid -VirtualSubnetID $ContosoVSID_VM -DestinationPrefix $Contoso_CloudVM_Subnet -NextHop 0.0.0.0

## Fabrikam Tenant lookup record configuration ##

New-NetVirtualizationLookupRecord -CustomerAddress $Fabrikam_CloudGW_IP -VirtualSubnetID $FabrikamVSID_GW -MACAddress $MTNicMac -ProviderAddress $Cloud_GW_ProviderAddress -Rule "TranslationMethodEncap" -Context "FabrikamSubnet"
New-NetVirtualizationLookupRecord -CustomerAddress $Fabrikam_CloudGW_DefaultGW -VirtualSubnetID $FabrikamVSID_GW -MACAddress $FabrikamDefaultNicMac -ProviderAddress $Cloud_GW_ProviderAddress -Rule "TranslationMethodEncap" -Context "FabrikamDefaultGW"
New-NetVirtualizationLookupRecord -CustomerAddress 0.0.0.0 -VirtualSubnetID $FabrikamVSID_GW -MACAddress $MTNicMac -ProviderAddress $Cloud_GW_ProviderAddress -Rule "TranslationMethodEncap" -Context "FabrikamWildcard" -Type "GatewayWildcard"
New-NetVirtualizationLookupRecord -CustomerAddress $Fabrikam_CloudVM_IP -VirtualSubnetID $FabrikamVSID_VM -MACAddress $FabrikamVMNicMac -ProviderAddress $Cloud_VM_ProviderAddress -Rule "TranslationMethodEncap" -Context "FabrikamVM1"
New-NetVirtualizationLookupRecord -CustomerAddress $Fabrikam_CloudVM2_IP -VirtualSubnetID $FabrikamVSID_VM -MACAddress $FabrikamVM2NicMac -ProviderAddress $Cloud_VM_ProviderAddress -Rule "TranslationMethodEncap" -Context "FabrikamVM2"

New-NetVirtualizationCustomerRoute -RoutingDomainID $FabrikamRoutinGDomainGuid -VirtualSubnetID $FabrikamVSID_GW -DestinationPrefix $Fabrikam_CloudGW_Subnet -NextHop 0.0.0.0
New-NetVirtualizationCustomerRoute -RoutingDomainID $FabrikamRoutinGDomainGuid -VirtualSubnetID $FabrikamVSID_VM -DestinationPrefix $Fabrikam_CloudVM_Subnet -NextHop 0.0.0.0

The script in this topic uses the following Windows PowerShell commands. Click a link to open the help topic for the command.

See Also

Additional Resources3