Start-PcsvDevice
Start-PcsvDevice
Starts the specified remote hardware device.
Sintaxe
Parameter Set: InputObject (cdxml)
Start-PcsvDevice -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByComputerName
Start-PcsvDevice [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> [[-Port] <UInt16> ] [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-Confirm] [-WhatIf] [ <CommonParameters>]
Descrição detalhada
The Start-PcsvDevice cmdlet starts a remote hardware device by using Web Services for Management (WS-Management) or Intelligent Platform Management Interface (IPMI). The cmdlet puts the device in the Enabled state, which corresponds to a startup of the hardware device. Specify the remote hardware device by the management name or IP address, provide credentials necessary to start the remote hardware device, and specify which management protocol to use. The credentials must have administrator permissions on the remote hardware device. You can also specify an authentication type to use for WS-Management.
Parâmetros
-AsJob
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
false |
Aceitar caracteres curinga? |
false |
-Authentication<Authentication>
Specifies an authentication method to use for devices managed by using WS-Management. Do not specify this parameter for devices managed by using IPMI. Os valores aceitáveis para este parâmetro são:
-- Basic
-- Digest
-- Default
If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-CimSession<CimSession[]>
Executa o cmdlet em uma sessão remota ou em um computador remoto. Insira um nome do computador ou um objeto de sessão, como a saída de um cmdlet New-CimSession ou Get-CimSession. O padrão é a sessão atual do computador local.
Aliases |
Session |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
false |
Aceitar caracteres curinga? |
false |
-Credential<PSCredential>
Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential
. This parameter specifies the credential for the remote hardware device.
Aliases |
nenhuma |
Necessário? |
true |
Posição? |
3 |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-InputObject<CimInstance[]>
Specifies an array of devices, as MSFT_PCSVDevice objects, to manage. To obtain MSFT_PCSVDevice objects, use the Get-PcsvDevice cmdlet.
Aliases |
nenhuma |
Necessário? |
true |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByValue) |
Aceitar caracteres curinga? |
false |
-ManagementProtocol<ManagementProtocol>
Specifies a management protocol used to communicate with a device. Os valores aceitáveis para este parâmetro são:
-- WSMAN
-- IPMI
Refer to your hardware documentation for supported management protocols.
Specify WSMAN for devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH) or Physical Computer System View profiles.
Aliases |
MP |
Necessário? |
true |
Posição? |
4 |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-PassThru
Retorna um objeto que representa o item com o qual você está trabalhando. Por padrão, este cmdlet não gera saída.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
false |
Aceitar caracteres curinga? |
false |
-Port<UInt16>
Specifies a port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default values:
-- IPMI and WSMAN over HTTP. Port 623.
-- WSMAN over HTTPS. Port 664.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
5 |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-SkipCACheck
Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-SkipCNCheck
Indicates that the certificate common name of the server does not need to match the host name of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Specify this parameter only for managing devices by using WS-Management over HTTPS. Be sure to specify this parameter only for trusted computers.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-SkipRevocationCheck
Indicates that the cmdlet skips the revocation check of server certificates. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Be sure to specify this parameter only for trusted computers.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-TargetAddress<String>
Specifies the name or IP address of the management port on the remote hardware device. For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address. For other devices, like network switches, this is the IP address of their management port. For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.
Aliases |
CN,ComputerName,IpAddress |
Necessário? |
true |
Posição? |
2 |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-ThrottleLimit<Int32>
Especifica o número máximo de operações simultâneas que podem ser estabelecidas para executar o cmdlet. Se esse parâmetro for omitido ou um valor de 0
for inserido, o Windows PowerShell® calculará o limite ideal de restrição para o cmdlet com base no número de cmdlets do CIM que estão em execução no computador. O limite de restrição se aplica somente ao cmdlet atual, e não à sessão ou ao computador.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
false |
Aceitar caracteres curinga? |
false |
-TimeoutSec<UInt32>
Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-UseSSL
Indicates that the server connects to the target computer by using SSL. WS-Management encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.
Aliases |
nenhuma |
Necessário? |
false |
Posição? |
named |
Valor padrão |
nenhuma |
Aceitar entrada do pipeline? |
True (ByPropertyName) |
Aceitar caracteres curinga? |
false |
-Confirm
Solicita que você confirme antes de executar o cmdlet.
Necessário? |
false |
Posição? |
named |
Valor padrão |
false |
Aceitar entrada do pipeline? |
false |
Aceitar caracteres curinga? |
false |
-WhatIf
Mostra o que aconteceria se o cmdlet fosse executado. O cmdlet não é executado.
Necessário? |
false |
Posição? |
named |
Valor padrão |
false |
Aceitar entrada do pipeline? |
false |
Aceitar caracteres curinga? |
false |
<CommonParameters>
Esse cmdlet dá suporte a parâmetros comuns: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer e -OutVariable. Para obter mais informações, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entradas
O tipo de entrada é o tipo dos objetos que você pode canalizar para o cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice
A MSFT_PCSVDevice object that is the target for the operation. To obtain a MSFT_PCSVDevice object, use the Get-PcsvDevice cmdlet.
Saídas
O tipo de saída é o tipo de objeto emitido pelo cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice
The cmdlet only returns an MSFT_PCSVDevice object if you specify the PassThru parameter.
Exemplos
Example 1: Start a computer by specifying its IP address
This example starts a device. After you execute these commands, the device enters the Enabled state.
The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential
.
The second command starts the target computer that has the management IP address 10.1.12.43 by using the IPMI management protocol. The command specifies the credential object stored in the $Credential variable.
PS C:\> $Credential = Get-Credential
PS C:\> Start-PcsvDevice -TargetAddress "10.1.12.43" -Credential $Credential -ManagementProtocol IPMI
Example 2: Start a computer by specifying it as an object
This example starts a device specified as an object. After you execute these commands, the device enters the Enabled state.
The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential
.
The second command uses the Get-PcsvDevice cmdlet to connect to the computer that has the specified management IP address by using the IPMI management protocol. The command specifies the credential object stored in the $Credential variable. The cmdlet passes that connection to the Start-PcsvDevice cmdlet by using the pipeline operator. That cmdlet starts the device.
PS C:\> $Credential = Get-Credential
PS C:\> Get-PcsvDevice –TargetAddress "10.1.12.43" -Credential $Credential -ManagementProtocol IPMI | Start-PcsvDevice