Compartilhar via


Exemplos de TraceLogging do C/C++

Este tópico contém exemplos de TraceLogging C/C++ usando TraceLoggingWrite.

Estes exemplos pressupõem que você configurou corretamente seu programa para TraceLogging:

#include <windows.h>
#include <TraceLoggingProvider.h>
#include <winmeta.h> // Define constants e.g. WINEVENT_LEVEL_VERBOSE

// Define the GUID to use in TraceLoggingProviderRegister
TRACELOGGING_DEFINE_PROVIDER(
    g_hMyComponentProvider,
    "SimpleTraceLoggingProvider",
    // {0205c616-cf97-5c11-9756-56a2cee02ca7}
    (0x0205c616,0xcf97,0x5c11,0x97,0x56,0x56,0xa2,0xce,0xe0,0x2c,0xa7));

// The following example functions are defined later in this topic.
void SimpleDataTypes();
void NamingData();
void LevelsAndKeywords();
void CombineKeywords();
void Arrays();
void Structs();

void main()
{
    // Register the provider
    TraceLoggingRegister(g_hMyComponentProvider);

    // Log events using the g_hMyComponentProvider handle...
    SimpleDataTypes();
    NamingData();
    LevelsAndKeywords();
    CombineKeywords();
    Arrays();
    Structs();

    // Stop TraceLogging and unregister the provider
    TraceLoggingUnregister(g_hMyComponentProvider);
}

Importante

Para evitar erros de vinculador para funções ou EventUnregister funções não resolvidasEventRegisterEventWriteTransfer, vincule-se advapi32.lib ao compilar esses exemplos.

Para coletar e decodificar eventos desses exemplos, você precisará iniciar um rastreamento usando uma ferramenta como tracelog ou traceview, executar o exemplo, parar o rastreamento usando uma ferramenta como tracelog ou traceview e decodificar o rastreamento usando uma ferramenta de decodificação como tracefmt ou traceview. Por exemplo, se meu provedor foi definido usando GUID {0205c616-cf97-5c11-9756-56a2cee02ca7}, posso exibir os eventos desses exemplos usando o tracelog e o tracefmt das ferramentas do SDK do Windows da seguinte maneira:

  • tracelog -start MyTraceSession -f MyTraceFile.etl -guid #0205c616-cf97-5c11-9756-56a2cee02ca7
  • Execute o exemplo.
  • tracelog -stop MyTraceSession
  • tracefmt -o MyTraceFile.txt MyTraceFile.etl
  • notepad MyTraceFile.txt

Registrar tipos de dados simples

Este exemplo mostra como registrar tipos de dados simples, como inteiros, boolianos e assim por diante.

void SimpleDataTypes()
{
    UINT8 u8 = 200;
    INT32 i32 = -2000000000;
    UINT32 u32 = 4000000000;
    INT64 i64 = 9000000000000000000;
    float f32 = 3.14f;
    BOOL b = TRUE;
    bool bcpp = true;

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "NumericValues",
        TraceLoggingUInt8(u8, "MyByteValue"),
        TraceLoggingInt32(i32, "MyIntValue"),
        TraceLoggingUInt32(u32, "MyUInt"),
        TraceLoggingHexUInt32(u32, "MyHexValue"),
        TraceLoggingInt64(i64, "MyBigValue"),
        TraceLoggingFloat32(f32, "MyFloat"),
        TraceLoggingBool(b, "MyBool32"),
        TraceLoggingBoolean(bcpp, "MyC++Boolean")
        );

#ifdef __cplusplus

    /*
    TraceLoggingValue() automatically determines the value type (C++ only).
    In many cases, TraceLoggingValue() can be used instead of a more specific macro.
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "NumericValues",
        TraceLoggingValue(u8, "MyByteValue"),
        TraceLoggingValue(i32, "MyIntValue"),
        TraceLoggingValue(u32, "MyUInt"),
        TraceLoggingHexUInt32(u32, "MyHexValue"), // TraceLoggingValue won't format as hexadecimal.
        TraceLoggingValue(i64, "INT64"),
        TraceLoggingValue(f32, "float"),
        TraceLoggingBool(b, "BOOL"), // TraceLoggingValue considers BOOL the same as int.
        TraceLoggingValue(bcpp, "bool (C++)") // But bool is a distinct type so this works ok.
        );

#endif

    /*
    Strings and chars
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Strings and Chars",
        TraceLoggingString("String1", "String (char)"),
        TraceLoggingWideString(L"LString2", "String (wide char)"),
        TraceLoggingChar('A', "Single char")
        );

    /*
    Other types
    */

    /*
    NOTE: In C, a GUID, FILETIME, or SYSTEMTIME value parameter must be an l-value.
    */

    INT_PTR iptr = 1234;
    UINT_PTR uptr = 4321;
    FILETIME ft;
    SYSTEMTIME st;
    SID const sid1 = { SID_REVISION, 1, 5, { 6 } };
    static const GUID s_TestGuid = { 0x3970f9cf, 0x2c0c, 0x4f11, { 0xb1, 0xcc, 0xe3, 0xa1, 0xe9, 0x95, 0x88, 0x33 } };

    GetSystemTime(&st);
    GetSystemTimeAsFileTime(&ft);

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Other Types",
        TraceLoggingGuid(s_TestGuid, "GUID"),
        TraceLoggingSystemTime(st, "Current Time (FILETIME)"),
        TraceLoggingPointer(&iptr, "Pointer value"), // Logs the pointer value, not the data.
        TraceLoggingSid(&sid1, "SID")
        TraceLoggingIntPtr(iptr, "INT_PTR"),
        TraceLoggingUIntPtr(uptr, "UINT_PTR")
        );
}

Campos de evento Name

O exemplo mostra como nomear campos de evento.

void NamingData()
{
    UINT32 Cat = 0xCA7;

    /*
    Each of the following four events are equivalent:
    */

    /*
    TraceLogging uses the symbol to automatically name the field "Cat"
    and assign it the value contained in the variable Cat (0xCA7).
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Cat1",
        TraceLoggingUInt32(Cat) // Field is automatically named "Cat"
        );

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Cat2",
        TraceLoggingValue(Cat) // Field is automatically named "Cat"
        );


    /*
    Use a different symbol for the value of the event's "Cat" field.
    */

    UINT32 Tiger = Cat;

    /*
    Now we need to explicitly name the datum or we will have events with a
    different field name ("Tiger").
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Tiger",
        TraceLoggingUInt32(Tiger, "Cat") // Field is explicitly named "Cat".
        );

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Cat3",
        TraceLoggingValue(Tiger, "Cat") // Field is explicitly named "Cat".
        );
};

Nível de verbosidade do evento de log

Este exemplo mostra como registrar eventos em log por nível de verbosidade.

#include <winmeta.h> // for WINEVENT_LEVEL_* definitions
void LevelsAndKeywords()
{
    /*
    Verbosity levels and event keywords must be compile-time constants.
    If TraceLoggingLevel is not used, the default is 5 (VERBOSE).
    If TraceLoggingKeyword is not used, the defualt is 0 (no categories).

    TraceLoggingLevel accepts values 0-255.
    TraceLoggingKeyword accepts values 0 to UINT64_MAX. Each bit is a category.

    Level and keyword are the primary system for filtering events. All events
    should have a meaningful (non-zero) level and keyword to enable filtering.
    See winmeta.h for predefined verbosity levels and reserved keyword values.
    */

    PCWSTR MyName = L"Joe";
    INT16 MyRank = 99;
    ULONG MySerialNumber = 12345;

    /*
    The following is only logged when session verbosity level is
    WINEVENT_LEVEL_VERBOSE (5) or higher ...
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Levels",
        TraceLoggingLevel(WINEVENT_LEVEL_VERBOSE),
        TraceLoggingWideString(MyName, "Name"),
        TraceLoggingInt16(MyRank, "Rank"),
        TraceLoggingUInt32(MySerialNumber, "Serial Number")
        );

    /*
    TraceLoggingWrite will not complain if TraceLoggingLevel is invoked more than once.
    However, only the last level will be used.
    The following event is only logged at WINEVENT_LEVEL_VERBOSE or higher...
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Levels",
        TraceLoggingLevel(WINEVENT_LEVEL_CRITICAL),
        TraceLoggingLevel(WINEVENT_LEVEL_VERBOSE),
        TraceLoggingWideString(MyName, "Name"),
        TraceLoggingInt16(MyRank, "Rank"),
        TraceLoggingUInt32(MySerialNumber, "Serial Number")
        );
}

Palavras-chave de evento de log

Este exemplo ilustra como definir palavras-chave de evento. A filtragem de eventos pode ser feita por nível e palavra-chave. Por exemplo, eventos de conclusão de cenário ou eventos de falha podem ser agrupados em palavras-chave separadas para que você possa filtrar facilmente esses eventos.

void CombineKeywords()
{
    /*
    Keywords can be combined using multiple TraceLoggingKeyword() macros ...
    */

    #define MY_PROVIDER_KEYWORD_BLUE    0x1
    #define MY_PROVIDER_KEYWORD_YELLOW  0x2
    #define MY_PROVIDER_KEYWORD_GREEN   (MY_PROVIDER_KEYWORD_BLUE | MY_PROVIDER_KEYWORD_YELLOW)

    PCWSTR Status = L"Feeling a bit green";

    /*
    These events are equivalent...
    */

    TraceLoggingWrite(
        g_hProvider,
        "Keywords",
        TraceLoggingKeyword(MY_PROVIDER_KEYWORD_GREEN),
        TraceLoggingValue(Status, "Current Status")
        );

    TraceLoggingWrite(
        g_hProvider,
        "Keywords",
        TraceLoggingKeyword(MY_PROVIDER_KEYWORD_BLUE | MY_PROVIDER_KEYWORD_YELLOW),
        TraceLoggingValue(Status, "Current Status")
        );

    TraceLoggingWrite(
        g_hProvider,
        "Keywords",
        TraceLoggingKeyword(MY_PROVIDER_KEYWORD_BLUE),
        TraceLoggingKeyword(MY_PROVIDER_KEYWORD_YELLOW),
        TraceLoggingValue(Status, "Current Status")
        );
}

Dados de evento da matriz de logs

Este exemplo mostra como registrar matrizes como dados de evento.

void Arrays()
{
    INT32 IntValsFixed[5] = {20, 21, 22, 23, 24};
    UINT cIntVals = 5;
    INT32* IntValsVar = new INT32[cIntVals];

    VERIFY_IS_NOT_NULL(IntValsVar);
    memcpy(IntValsVar, IntValsFixed, sizeof(IntValsFixed));


    /*
    Variable size arrays
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Variable Size Arrays",
        TraceLoggingInt32Array(IntValsVar, (UINT16)cIntVals, "Variable size int array"),
        TraceLoggingInt32Array(IntValsVar, 5, "Variable size int array")
        );

    /*
    Fixed size arrays

    Fixed size array macros use the "FixedArray" suffix.
    The absence of the suffix indicates a variable sized array.
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "Constant Size Arrays",
        TraceLoggingInt32FixedArray(IntValsFixed, _countof(IntValsFixed), "Constant size int array")
        );

    delete [] IntValsVar;
}

Dados de evento da estrutura de log

Este exemplo mostra como registrar dados de evento da estrutura de log.

void Structs()
{
    WIN32_FIND_DATA FindData;
    HANDLE hFind = FindFirstFile(".", &FindData);

    VERIFY_IS_TRUE(hFind != INVALID_HANDLE_VALUE);

    /*
    TraceLoggingStruct defines a group of related fields in an event.
    The first parameter, which must be a compile-time constant, indicates
    the number of subsequent fields that are to be considered part of the
    struct.
    */

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "FindFirstFile",
        TraceLoggingStruct(5, "FileData"),
            TraceLoggingString(FindData.cFileName, "Name"),
            TraceLoggingUInt32(FindData.dwFileAttributes, "Attributes"),
            TraceLoggingFileTime(FindData.ftCreationTime, "CreateTime"),
            TraceLoggingUInt32(FindData.nFileSizeHigh, "SizeHigh"),
            TraceLoggingUInt32(FindData.nFileSizeLow, "SizeLow"),
        TraceLoggingPointer(hFind, "Result")
        );

    /*
    ... or ...
    */

#define LogWin32FindData(fd) \
    TraceLoggingStruct(5, "FileData"), \
    TraceLoggingString(((fd).cFileName), "Name"), \
    TraceLoggingUInt32(((fd).dwFileAttributes), "Attributes"), \
    TraceLoggingFileTime(((fd).ftCreationTime), "CreateTime"), \
    TraceLoggingUInt32(((fd).nFileSizeHigh), "SizeHigh"), \
    TraceLoggingUInt32(((fd).nFileSizeLow), "SizeLow")

    TraceLoggingWrite(
        g_hMyComponentProvider,
        "FindFirstFile",
        LogWin32FindData(FindData),
        TraceLoggingPointer(hFind, "Result")
        );

    FindClose(hFind);
}