Editar

Partilhar via


Set-ADReplicationSite

Sets the replication properties for an Active Directory site.

Syntax

Set-ADReplicationSite
   [-WhatIf]
   [-Confirm]
   [-Add <Hashtable>]
   [-AuthType <ADAuthType>]
   [-AutomaticInterSiteTopologyGenerationEnabled <Boolean>]
   [-AutomaticTopologyGenerationEnabled <Boolean>]
   [-Clear <String[]>]
   [-Credential <PSCredential>]
   [-Description <String>]
   [-Identity] <ADReplicationSite>
   [-InterSiteTopologyGenerator <ADDirectoryServer>]
   [-ManagedBy <ADPrincipal>]
   [-PassThru]
   [-ProtectedFromAccidentalDeletion <Boolean>]
   [-RedundantServerTopologyEnabled <Boolean>]
   [-Remove <Hashtable>]
   [-Replace <Hashtable>]
   [-ReplicationSchedule <ActiveDirectorySchedule>]
   [-ScheduleHashingEnabled <Boolean>]
   [-Server <String>]
   [-TopologyCleanupEnabled <Boolean>]
   [-TopologyDetectStaleEnabled <Boolean>]
   [-TopologyMinimumHopsEnabled <Boolean>]
   [-UniversalGroupCachingEnabled <Boolean>]
   [-UniversalGroupCachingRefreshSite <ADReplicationSite>]
   [-WindowsServer2000BridgeheadSelectionMethodEnabled <Boolean>]
   [-WindowsServer2000KCCISTGSelectionBehaviorEnabled <Boolean>]
   [-WindowsServer2003KCCBehaviorEnabled <Boolean>]
   [-WindowsServer2003KCCIgnoreScheduleEnabled <Boolean>]
   [-WindowsServer2003KCCSiteLinkBridgingEnabled <Boolean>]
   [<CommonParameters>]
Set-ADReplicationSite
   [-WhatIf]
   [-Confirm]
   [-AuthType <ADAuthType>]
   [-Credential <PSCredential>]
   -Instance <ADReplicationSite>
   [-PassThru]
   [-Server <String>]
   [<CommonParameters>]

Description

The Set-ADReplicationSite cmdlet is used to set the properties for an Active Directory site that is being used for replication. Sites are used in Active Directory to either enable clients to discover network resources (published shares, domain controllers) close to the physical location of a client computer or to reduce network traffic over wide area network (WAN) links. Sites can also be used to optimize replication between domain controllers.

Examples

Example 1: Set the replication site to prevent connections

PS C:\> Set-ADReplicationSite -Identity NorthAmerica -InterSiteTopologyGenerator corp-DC02 -AutomaticInterSiteTopologyGenerationEnabled $False

The command sets the properties of the site with name NorthAmerica to prevent its intersite topology generator (ISTG) at corp-DC02 from generating connections for intersite replication.

Example 2: Set replication start times for a filtered list of sites

PS C:\> Get-ADReplicationSite -Filter * | % {Set-ADReplicationSite $_ -ScheduleHashingEnabled $True}

This command returns all the sites in the directory and sets the ScheduleHashingEnabled property to spread replication start times randomly across the entire schedule interval rather than just the first quarter of the interval.

Example 3: Set the replication schedule for a site

PS C:\> $Schedule = New-Object -TypeName System.DirectoryServices.ActiveDirectory.ActiveDirectorySchedule
PS C:\> $Schedule.ResetSchedule()
PS C:\> $Schedule.SetDailySchedule("Twenty","Zero","TwentyTwo","Thirty")
PS C:\> Set-ADReplicationSite -Identity "Asia" -ReplicationSchedule $Schedule

This example sets the daily replication schedule of the site with name Asia.

Parameters

-Add

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace, and Clear parameters together, the operations are performed in the following order:

  • Remove
  • Add
  • Replace
  • Clear
Type:Hashtable
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AuthType

Specifies the authentication method to use. The acceptable values for this parameter are:

  • Negotiate or 0
  • Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

Type:ADAuthType
Accepted values:Negotiate, Basic
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AutomaticInterSiteTopologyGenerationEnabled

Indicates whether the cmdlet prevents the Knowledge Consistency Checker (KCC) that functions as the intersite topology generator (ISTG) from generating connections for intersite replication. Use this option when you want to create manual intersite connections (disable the ISTG) but retain the KCC to generate intrasite connections.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AutomaticTopologyGenerationEnabled

Indicates whether to enable automatic topology generation. When enabled, prevents the KCC from generating intrasite connections on all servers in the site. Disable this option if you use manual connections and do not want the KCC to build connections automatically.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Clear

Specifies an array of object properties that are cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations are performed in the following order:

  • Remove
  • Add
  • Replace
  • Clear
Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Credential

Specifies a user account that has permission to perform this action. The default is the current user.

Type a user name, such as User01 or Domain01\User01, or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.

This parameter is not supported by any providers installed with Windows PowerShell.

Type:PSCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Description

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is description.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Identity

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. The acceptable values for this parameter are:

  • A connection name
  • A distinguished name
  • A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

Type:ADReplicationSite
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Instance

Specifies an instance of a site object to use as a template for a new site object.

You can use an instance of an existing site object as a template or you can construct a new site object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing site object as a template for a new object. To retrieve an instance of an existing site object, use a cmdlet such as Get-ADReplicationSite. Then provide this object to the Instance parameter of the New-ADReplicationSite cmdlet to create a new site object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADReplicationSite and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSite cmdlet to create the new Active Directory object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.

Type:ADReplicationSite
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-InterSiteTopologyGenerator

Specifies the server acting as the inter-site topology generator for this site.

Type:ADDirectoryServer
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ManagedBy

Specifies the user or group that manages the object by providing one of the following property values:

  • Distinguished name
  • GUID (objectGUID)
  • Security identifier (objectSid)
  • SAM account name (sAMAccountName)

Note: The identifier in parentheses is the LDAP display name for the property.

This parameter sets the Active Directory attribute with an LDAP display name of managedBy.

Type:ADPrincipal
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ProtectedFromAccidentalDeletion

Specifies whether to prevent the object from being deleted. When this property is set to $True, you cannot delete the corresponding object without changing the value of the property. The acceptable values for this parameter are:

  • $False or 0
  • $True or 1
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RedundantServerTopologyEnabled

Indicates whether the cmdlet creates redundant connections between sites before a failure takes place. When enabled, disables KCC failover. Requires that automatic detection of failed connections also be disabled (+IS_TOPL_DETECT_STALE_DISABLED).

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Remove

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters are applied in the following sequence:

  • Remove
  • Add
  • Replace
  • Clear
Type:Hashtable
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Replace

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters are applied in the following sequence:

  • Remove
  • Add
  • Replace
  • Clear
Type:Hashtable
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ReplicationSchedule

Specifies the default replication schedule for connections within this site (intra-site replication).

Type:ActiveDirectorySchedule
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ScheduleHashingEnabled

Indicates whether the cmdlet spreads replication start times randomly across the entire schedule interval rather than just the first quarter of the interval.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Server

Specifies the Active Directory Domain Services (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

  • Fully qualified domain name
  • NetBIOS name

Directory server values:

  • Fully qualified directory server name
  • NetBIOS name
  • Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

  • By using the Server value from objects passed through the pipeline
  • By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
  • By using the domain of the computer running Windows PowerShell
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-TopologyCleanupEnabled

Indicates whether the cmdlet enables topology cleanup. When enabled, this optional parameter prevents the Knowledge Consistency Checker(KCC) from removing connection objects that it does not need. Disable this option if you want to take responsibility for removing old redundant connections. Alternatively, to control or augment the topology, you can use manual connections, which the KCC does not delete.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-TopologyDetectStaleEnabled

Indicates whether the cmdlet enables topology detect stale. This parameter option prevents the Knowledge Consistency Checker (KCC) from excluding servers that are unreachable from the topology; that is, the KCC does use an alternate server to reroute replication. Use this option only if network communication is very unstable and brief outages are expected.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-TopologyMinimumHopsEnabled

Indicates whether the cmdlet enables topology minimum hops. When enabled, this parameter prevents the Knowledge Consistency Checker (KCC) from generating optimizing connections in the ring topology of intrasite replication. Optimizing connections reduce the replication latency in the site and disabling them is not recommended.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-UniversalGroupCachingEnabled

Indicates whether the cmdlet enables universal group caching. If this parameter is true, it indicates this site caches universal groups, which are those groups cached on global catalog (GC) servers. It can be useful in sites with no GC servers available locally.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-UniversalGroupCachingRefreshSite

Specifies the name of a site. If universal group caching is enabled, this parameter sets the name of the site from which the cache is pulled.

Type:ADReplicationSite
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WindowsServer2000BridgeheadSelectionMethodEnabled

Indicates whether the cmdlet implements the Windows 2000 Server method of selecting a single bridgehead server per directory partition and transport.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WindowsServer2000KCCISTGSelectionBehaviorEnabled

Indicates whether the cmdlet implements the Windows 2000 Server method of Intersite Topology Generator (ISTG) selection. By default, it is disabled.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WindowsServer2003KCCBehaviorEnabled

Indicates whether the cmdlet implements Knowledge Consistency Checker (KCC) operation that is consistent with Windows Server 2003 forest functional level. This option can be set if all domain controllers in the site are running Windows Server 2003.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WindowsServer2003KCCIgnoreScheduleEnabled

Indicates whether to ignore schedules. When the forest functional level Windows Server 2003 or Windows Server 2003 interim is in effect, provides KCC control of the ability to ignore schedules (replication occurs at the designated intervals and is always available).

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WindowsServer2003KCCSiteLinkBridgingEnabled

Indicates whether the cmdlet enables site link bridging. When the forest functional level Windows Server 2003 or Windows Server 2003 interim is in effect, provides Knowledge Consistency Checker (KCC) control of the ability to enable or disable site link bridging.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None or Microsoft.ActiveDirectory.Management.ADReplicationSite

A site object is received by the Identity parameter.

A site object that was retrieved by using the Get-ADReplicationSite cmdlet and then modified is received by the Instance parameter.

Outputs

None or Microsoft.ActiveDirectory.Management.ADReplicationSite