Get-NetAdapterQos
Gets the QoS properties of the network adapter, specifically DCB settings.
Syntax
Get-NetAdapterQos
[[-Name] <String[]>]
[-IncludeHidden]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]
Get-NetAdapterQos
-InterfaceDescription <String[]>
[-IncludeHidden]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]
Description
The Get-NetAdapterQos cmdlet gets quality of service (QoS) capabilities and runtime configurations of a DCB-capable network adapter. If QoS is disabled, then this cmdlet only gets the hardware QoS capabilities of the network adapter. If QoS is enabled, then this cmdlet gets the operational traffic class and flow control configurations in addition. If the network adapter supports the DCB Exchange protocol and is connected to a switch that also supports the protocol, then this cmdlet can also return the QoS configurations on the switch.
If a network adapter does not support QoS, specifically DCB, then this cmdlet does not return any information.
Examples
Example 1: Display hardware QoS capabilities and runtime configurations for network adapters where QoS is enabled
PS C:\> Get-NetAdapterQos -Name "*" | Where-Object -FilterScript { $_.Enabled }
Name : DCBADAPTER1
Enabled : True
Capabilities : Hardware Current
-------- -------
MacSecBypass : NotSupported NotSupported
DcbxSupport : IEEE None
NumTCs(Max/ETS/PFC) : 8/8/8 8/8/8
OperationalTrafficClasses : TC TSA Bandwidth Priorities
-- --- --------- ----------
0 ETS 40 0-3,5-7
1 ETS 60 4
OperationalFlowControl : Priority 4 Enabled
OperationalClassifications : Not Available
This command displays the hardware QoS capabilities and the runtime QoS configurations for a network adapter on which QoS is enabled.
Example 2: Display hardware QoS capabilities for network adapters where QoS is disabled
PS C:\> Get-NetAdapterQos -Name "*" | Where-Object -FilterScript { $_.Enabled -Eq "False" }
Name : DCBADAPTER1
Enabled : False
Capabilities : Hardware Current
-------- -------
MacSecBypass : NotSupported NotSupported
DcbxSupport : None None
NumTCs(Max/ETS/PFC) : 8/8/8 0/0/0
This command displays only the hardware QoS capabilities for a network adapter on which QoS is disabled.
Parameters
-AsJob
Runs the cmdlet as a background job.
Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job
cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell® background jobs, see about_Jobs.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Aliases: | Session |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-IncludeHidden
Indicates that the cmdlet includes both visible and hidden network adapters in the operation. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-InterfaceDescription
Specifies an array of network adapter interface descriptions.
For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
Type: | String[] |
Aliases: | ifDesc, InstanceID |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-Name
Specifies an array of network adapter names.
Type: | String[] |
Aliases: | ifAlias, InterfaceAlias |
Position: | 0 |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
None
Outputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
The output object contains QoS capabilities and configurations on a network adapter.
Related Links
Comentários
https://aka.ms/ContentUserFeedback.
Brevemente: Ao longo de 2024, vamos descontinuar progressivamente o GitHub Issues como mecanismo de feedback para conteúdos e substituí-lo por um novo sistema de feedback. Para obter mais informações, veja:Submeter e ver comentários