Configure an Azure load balancer for an FCI VNN - SQL Server on Azure VMs
Applies to:
SQL Server on Azure VM
Tip
There are many methods to deploy an availability group. Simplify your deployment and eliminate the need for an Azure Load Balancer or distributed network name (DNN) for your Always On availability group by creating your SQL Server virtual machines (VMs) in multiple subnets within the same Azure virtual network. If you've already created your availability group in a single subnet, you can migrate it to a multi-subnet environment.
On Azure virtual machines, clusters use a load balancer to hold an IP address that needs to be on one cluster node at a time. In this solution, the load balancer holds the IP address for the virtual network name (VNN) that the clustered resource uses in Azure.
This article teaches you to configure a load balancer by using the Azure Load Balancer service. The load balancer will route traffic to your failover cluster instance with SQL Server on Azure VMs for high availability and disaster recovery (HADR).
For an alternative connectivity option for SQL Server 2019 CU2 and later, consider a distributed network name (DNN) instead. A DNN offers simplified configuration and improved failover.
Prerequisites
Before you complete the steps in this article, you should already have:
- Determined that Azure Load Balancer is the appropriate connectivity option for your FCI.
- Configured your FCI.
- Installed the latest version of PowerShell.
Create a load balancer
You can create either of these types of load balancers:
Internal: An internal load balancer can be accessed only from private resources that are internal to the network. When you configure an internal load balancer and its rules, use the FCI IP address as the front-end IP address.
External: An external load balancer can route traffic from the public to internal resources. When you configure an external load balancer, you can't use a public IP address like the FCI IP address.
To use an external load balancer, logically allocate an IP address in the same subnet as the FCI that doesn't conflict with any other IP address. Use this address as the front-end IP address for the load-balancing rules.
To create the load balancer:
In the Azure portal, go to the resource group that contains the virtual machines.
Select Add. Search Azure Marketplace for load balancer. Select Load Balancer.
Select Create.
In Create load balancer, on the Basics tab, set up the load balancer by using the following values:
- Subscription: Your Azure subscription.
- Resource group: The resource group that contains your virtual machines.
- Name: A name that identifies the load balancer.
- Region: The Azure location that contains your virtual machines.
- SKU: Standard.
- Type: Either Public or Internal. An internal load balancer can be accessed from within the virtual network. Most Azure applications can use an internal load balancer. If your application needs access to SQL Server directly over the internet, use a public load balancer.
- Tier: Regional.
Select Next: Frontend IP configuration.
Select Add a frontend IP configuration.
Set up the front-end IP address by using the following values:
- Name: A name that identifies the front-end IP configuration.
- Virtual network: The same network as the virtual machines.
- Subnet: The same subnet as the virtual machines.
- Assignment: Static.
- IP address: The IP address that you assigned to the clustered network resource.
- Availability zone: An optional availability zone to deploy your IP address to.
Select Add to create the front-end IP address.
Choose Review + Create to create the load balancer.
Configure a backend pool
Return to the Azure resource group that contains the virtual machines and locate the new load balancer. You might need to refresh the view on the resource group. Select the load balancer.
Select Backend pools, and then select +Add.
For Name, provide a name for the backend pool.
For Backend Pool Configuration, select NIC.
Select Add to associate the backend pool with the availability set that contains the VMs.
Under Virtual machine, choose the virtual machines that will participate as cluster nodes. Be sure to include all virtual machines that will host the FCI.
Add only the primary IP address of each VM. Don't add any secondary IP addresses.
Select Add to add the virtual machines to the backend pool.
Select Save to create the backend pool.
Configure a health probe
On the pane for the load balancer, select Health probes.
On the Add health probe pane, set the following parameters:
- Name: A name for the health probe.
- Protocol: TCP.
- Port: The port that you created in the firewall for the health probe when preparing the VM. In this article, the example uses TCP port 59999.
- Interval: 5 Seconds.
Select Add.
Set load-balancing rules
On the pane for the load balancer, select Load-balancing rules.
Select Add.
Set these parameters:
- Name: A name for the load-balancing rule.
- Frontend IP address: The IP address that you set when you configured the frontend.
- Backend pool: The backend pool that contains the virtual machines targeted for the load balancer.
- HA Ports: Enables load balancing on all ports for TCP and UDP protocols.
- Protocol: TCP.
- Port: The SQL Server TCP port. The default is 1433.
- Backend port: The same port as the Port value when you enable Floating IP (direct server return).
- Health probe: The health probe that you configured earlier.
- Session persistence: None.
- Idle timeout (minutes): 4.
- Floating IP (direct server return): Enabled.
Select Save.
Configure a cluster probe
Set the cluster probe's port parameter in PowerShell.
Update the variables in the following script with values from your environment. Remove the angle brackets (<
and >
) from the script.
$ClusterNetworkName = "<Cluster Network Name>"
$IPResourceName = "<SQL Server FCI IP Address Resource Name>"
$ILBIP = "<n.n.n.n>"
[int]$ProbePort = <nnnnn>
Import-Module FailoverClusters
Get-ClusterResource $IPResourceName | Set-ClusterParameter -Multiple @{"Address"="$ILBIP";"ProbePort"=$ProbePort;"SubnetMask"="255.255.255.255";"Network"="$ClusterNetworkName";"EnableDhcp"=0}
The following table describes the values that you need to update:
Variable | Value |
---|---|
ClusterNetworkName |
The name of the Windows Server failover cluster for the network. In Failover Cluster Manager > Networks, right-click the network and select Properties. The correct value is under Name on the General tab. |
IPResourceName |
The resource name for the IP address of the SQL Server FCI. In Failover Cluster Manager > Roles, under the SQL Server FCI role, under Server Name, right-click the IP address resource and select Properties. The correct value is under Name on the General tab. |
ILBIP |
The IP address of the internal load balancer. This address is configured in the Azure portal as the internal load balancer's frontend address. This is also the IP address of the SQL Server FCI. You can find it in Failover Cluster Manager, on the same properties page where you located the value for IPResourceName . |
ProbePort |
The probe port that you configured in the load balancer's health probe. Any unused TCP port is valid. |
SubnetMask |
The subnet mask for the cluster parameter. It must be the TCP/IP broadcast address: 255.255.255.255 . |
After you set the cluster probe, you can see all the cluster parameters in PowerShell. Run this script:
Get-ClusterResource $IPResourceName | Get-ClusterParameter
Modify the connection string
For clients that support it, add MultiSubnetFailover=True
to the connection string. Although the MultiSubnetFailover
connection option isn't required, it provides the benefit of a faster subnet failover. This is because the client driver tries to open a TCP socket for each IP address in parallel. The client driver waits for the first IP address to respond with success. After the successful response, the client driver uses that IP address for the connection.
If your client doesn't support the MultiSubnetFailover
parameter, you can modify the RegisterAllProvidersIP
and HostRecordTTL
settings to prevent connectivity delays upon failover.
Use PowerShell to modify the RegisterAllProvidersIp
and HostRecordTTL
settings:
Get-ClusterResource yourFCIname | Set-ClusterParameter RegisterAllProvidersIP 0
Get-ClusterResource yourFCIname | Set-ClusterParameter HostRecordTTL 300
To learn more, see the documentation about listener connection timeout in SQL Server.
Tip
- Set the
MultiSubnetFailover
parameter totrue
in the connection string, even for HADR solutions that span a single subnet. This setting supports future spanning of subnets without the need to update connection strings. - By default, clients cache cluster DNS records for 20 minutes. By reducing
HostRecordTTL
, you reduce the time to live (TTL) for the cached record. Legacy clients can then reconnect more quickly. As such, reducing theHostRecordTTL
setting might increase traffic to the DNS servers.
Test failover
Test failover of the clustered resource to validate cluster functionality:
- Connect to one of the SQL Server cluster nodes by using Remote Desktop Protocol (RDP).
- Open Failover Cluster Manager. Select Roles. Notice which node owns the SQL Server FCI role.
- Right-click the SQL Server FCI role.
- Select Move, and then select Best Possible Node.
Failover Cluster Manager shows the role, and its resources go offline. The resources then move and come back online in the other node.
Test connectivity
To test connectivity, sign in to another virtual machine in the same virtual network. Open SQL Server Management Studio and connect to the SQL Server FCI name.
Note
If you need to, you can download SQL Server Management Studio.
Next steps
To learn more, see:
Feedback
https://aka.ms/ContentUserFeedback.
În curând: Pe parcursul anului 2024, vom elimina treptat Probleme legate de GitHub ca mecanism de feedback pentru conținut și îl vom înlocui cu un nou sistem de feedback. Pentru mai multe informații, consultați:Trimiteți și vizualizați feedback pentru