Decimal.CompareTo Метод

Определение

Сравнивает этот экземпляр с заданным объектом или объектом типа Decimal и возвращает значение, указывающее, как соотносятся значения этих объектов.

Перегрузки

CompareTo(Decimal)

Сравнивает этот экземпляр с заданным объектом Decimal и возвращает сравнение значений этих объектов.

CompareTo(Object)

Сравнивает этот экземпляр с заданным объектом и возвращает сравнение значений этих объектов.

CompareTo(Decimal)

Исходный код:
Decimal.cs
Исходный код:
Decimal.cs
Исходный код:
Decimal.cs

Сравнивает этот экземпляр с заданным объектом Decimal и возвращает сравнение значений этих объектов.

public:
 virtual int CompareTo(System::Decimal value);
public int CompareTo (decimal value);
abstract member CompareTo : decimal -> int
override this.CompareTo : decimal -> int
Public Function CompareTo (value As Decimal) As Integer

Параметры

value
Decimal

Объект, сравниваемый с данным экземпляром.

Возвращаемое значение

Число со знаком, представляющее относительные значения этого экземпляра и параметра value.

Возвращаемое значение Значение
Меньше нуля Этот экземпляр меньше параметра value.
Нуль Этот экземпляр и параметр value равны.
Больше нуля Этот экземпляр больше параметра value.

Реализации

Примеры

В следующем примере кода показаны универсальные и необщиные CompareTo версии метода для нескольких типов значений и ссылок.

// This example demonstrates the two versions of the 
// CompareTo method for several base types.
// The general version takes a parameter of type Object, while the specific
// version takes a type-specific parameter, such as Boolean, Int32, or Double.
using namespace System;

void Show( String^ caption, Object^ var1, Object^ var2, int resultGeneric, int resultNonGeneric )
{
   String^ relation;
   Console::Write( caption );
   if ( resultGeneric == resultNonGeneric )
   {
      if ( resultGeneric < 0 )
            relation = "less than";
      else
      if ( resultGeneric > 0 )
            relation = "greater than";
      else
            relation = "equal to";
      Console::WriteLine( "{0} is {1} {2}", var1, relation, var2 );
   }
   // The following condition will never occur because the generic and non-generic
   // CompareTo methods are equivalent.
   else
   {
      Console::WriteLine( "Generic CompareTo = {0}; non-generic CompareTo = {1}", resultGeneric, resultNonGeneric );
   }
}

int main()
{
   String^ nl = Environment::NewLine;
   String^ msg = "{0}The following is the result of using the generic and non-generic{0}"
   "versions of the CompareTo method for several base types:{0}";
   Object^ obj; // An Object used to insure CompareTo(Object) is called.

   DateTime now = DateTime::Now;
   
   // Time span = 11 days, 22 hours, 33 minutes, 44 seconds
   TimeSpan tsX = TimeSpan(11,22,33,44);
   
   // Version = 1.2.333.4
   Version^ versX = gcnew Version(  "1.2.333.4" );
   
   // Guid = CA761232-ED42-11CE-BACD-00AA0057B223
   Guid guidX = Guid( "{CA761232-ED42-11CE-BACD-00AA0057B223}");
   Boolean a1 = true,a2 = true;
   Byte b1 = 1,b2 = 1;
   Int16 c1 = -2,c2 = 2;
   Int32 d1 = 3,d2 = 3;
   Int64 e1 = 4,e2 = -4;
   Decimal f1 = Decimal(-5.5), f2 = Decimal(5.5);
   Single g1 = 6.6f,g2 = 6.6f;
   Double h1 = 7.7,h2 = -7.7;
   Char i1 = 'A',i2 = 'A';
   String^ j1 = "abc", ^j2 = "abc";
   DateTime k1 = now,k2 = now;
   TimeSpan l1 = tsX,l2 = tsX;
   Version^ m1 = versX, ^m2 = gcnew Version(  "2.0" );
   Guid n1 = guidX,n2 = guidX;
   
   // The following types are not CLS-compliant.
   SByte w1 = 8,w2 = 8;
   UInt16 x1 = 9,x2 = 9;
   UInt32 y1 = 10,y2 = 10;
   UInt64 z1 = 11,z2 = 11;
   
   //
   Console::WriteLine( msg, nl );
   try
   {
      Show( "Boolean: ", a1, a2, a1.CompareTo( a2 ), a1.CompareTo( a2 ) );
      Show( "Byte:    ", b1, b2, b1.CompareTo( b2 ), b1.CompareTo( b2 ) );
      Show( "Int16:   ", c1, c2, c1.CompareTo( c2 ), c1.CompareTo( c2 ) );
      Show( "Int32:   ", d1, d2, d1.CompareTo( d2 ), d1.CompareTo( d2 ) );
      Show( "Int64:   ", e1, e2, e1.CompareTo( e2 ), e1.CompareTo( e2 ) );
      Show( "Decimal: ", f1, f2, f1.CompareTo( f2 ), f1.CompareTo( f2 ) );
      Show( "Single:  ", g1, g2, g1.CompareTo( g2 ), g1.CompareTo( g2 ) );
      Show( "Double:  ", h1, h2, h1.CompareTo( h2 ), h1.CompareTo( h2 ) );
      Show( "Char:    ", i1, i2, i1.CompareTo( i2 ), i1.CompareTo( i2 ) );
      
      // Use an anonymous object to hide the String object.
      obj = j2;
      Show( "String:  ", j1, j2, j1->CompareTo( j2 ), j1->CompareTo( obj ) );
      Show( "DateTime:", k1, k2, k1.CompareTo( k2 ), k1.CompareTo( k2 ) );
      Show(  "TimeSpan: ", l1, l2, l1.CompareTo( l2 ), l1.CompareTo( l2 ) );
      
      // Use an anonymous object to hide the Version object.
      obj = m2;
      Show(  "Version:  ", m1, m2, m1->CompareTo( m2 ), m1->CompareTo( obj ) );
      Show(  "Guid:     ", n1, n2, n1.CompareTo( n2 ), n1.CompareTo( n2 ) );
      
      //
      Console::WriteLine( "{0}The following types are not CLS-compliant:", nl );
      Show( "SByte:   ", w1, w2, w1.CompareTo( w2 ), w1.CompareTo( w2 ) );
      Show( "UInt16:  ", x1, x2, x1.CompareTo( x2 ), x1.CompareTo( x2 ) );
      Show( "UInt32:  ", y1, y2, y1.CompareTo( y2 ), y1.CompareTo( y2 ) );
      Show( "UInt64:  ", z1, z2, z1.CompareTo( z2 ), z1.CompareTo( z2 ) );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e );
   }

}
//     This example displays the following output:
//     
//     The following is the result of using the generic and non-generic versions of the
//     CompareTo method for several base types:
//     
//     Boolean:  True is equal to True
//     Byte:     1 is equal to 1
//     Int16:    -2 is less than 2
//     Int32:    3 is equal to 3
//     Int64:    4 is greater than -4
//     Decimal:  -5.5 is less than 5.5
//     Single:   6.6 is equal to 6.6
//     Double:   7.7 is greater than -7.7
//     Char:     A is equal to A
//     String:   abc is equal to abc
//     DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
//     TimeSpan: 11.22:33:44 is equal to 11.22:33:44
//     Version:  1.2.333.4 is less than 2.0
//     Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
//     aa0057b223
//     
//     The following types are not CLS-compliant:
//     SByte:    8 is equal to 8
//     UInt16:   9 is equal to 9
//     UInt32:   10 is equal to 10
//     UInt64:   11 is equal to 11
// This example demonstrates the generic and non-generic versions of the
// CompareTo method for several base types.
// The non-generic version takes a parameter of type Object, while the generic
// version takes a type-specific parameter, such as Boolean, Int32, or Double.

using System;

class Sample
{
    public static void Main()
    {
    string    nl = Environment.NewLine;
    string    msg = "{0}The following is the result of using the generic and non-generic{0}" +
                    "versions of the CompareTo method for several base types:{0}";

    DateTime  now = DateTime.Now;
// Time span = 11 days, 22 hours, 33 minutes, 44 seconds
    TimeSpan  tsX = new TimeSpan(11, 22, 33, 44);
// Version = 1.2.333.4
    Version   versX = new Version("1.2.333.4");
// Guid = CA761232-ED42-11CE-BACD-00AA0057B223
    Guid      guidX = new Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}");

    Boolean  a1 = true,  a2 = true;
    Byte     b1 = 1,     b2 = 1;
    Int16    c1 = -2,    c2 = 2;
    Int32    d1 = 3,     d2 = 3;
    Int64    e1 = 4,     e2 = -4;
    Decimal  f1 = -5.5m, f2 = 5.5m;
    Single   g1 = 6.6f,  g2 = 6.6f;
    Double   h1 = 7.7d,  h2 = -7.7d;
    Char     i1 = 'A',   i2 = 'A';
    String   j1 = "abc", j2 = "abc";
    DateTime k1 = now,   k2 = now;
    TimeSpan l1 = tsX,   l2 = tsX;
    Version  m1 = versX, m2 = new Version("2.0");
    Guid     n1 = guidX, n2 = guidX;

// The following types are not CLS-compliant.
    SByte    w1 = 8,     w2 = 8;
    UInt16   x1 = 9,     x2 = 9;
    UInt32   y1 = 10,    y2 = 10;
    UInt64   z1 = 11,    z2 = 11;
//
    Console.WriteLine(msg, nl);
    try
        {
// The second and third Show method call parameters are automatically boxed because
// the second and third Show method declaration arguments expect type Object.

        Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo((Object)a2));
        Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo((Object)b2));
        Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo((Object)c2));
        Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo((Object)d2));
        Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo((Object)e2));
        Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo((Object)f2));
        Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo((Object)g2));
        Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo((Object)h2));
        Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo((Object)i2));
        Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo((Object)j2));
        Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo((Object)k2));
        Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo((Object)l2));
        Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo((Object)m2));
        Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo((Object)n2));
//
        Console.WriteLine("{0}The following types are not CLS-compliant:", nl);
        Show("SByte:    ", w1, w2, w1.CompareTo(w2), w1.CompareTo((Object)w2));
        Show("UInt16:   ", x1, x2, x1.CompareTo(x2), x1.CompareTo((Object)x2));
        Show("UInt32:   ", y1, y2, y1.CompareTo(y2), y1.CompareTo((Object)y2));
        Show("UInt64:   ", z1, z2, z1.CompareTo(z2), z1.CompareTo((Object)z2));
        }
    catch (Exception e)
        {
        Console.WriteLine(e);
        }
    }

    public static void Show(string caption, Object var1, Object var2,
                            int resultGeneric, int resultNonGeneric)
    {
    string relation;

    Console.Write(caption);
    if (resultGeneric == resultNonGeneric)
        {
        if      (resultGeneric < 0) relation = "less than";
        else if (resultGeneric > 0) relation = "greater than";
        else                        relation = "equal to";
        Console.WriteLine("{0} is {1} {2}", var1, relation, var2);
        }

// The following condition will never occur because the generic and non-generic
// CompareTo methods are equivalent.

    else
        {
        Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}",
                           resultGeneric, resultNonGeneric);
        }
   }
}
/*
This example produces the following results:

The following is the result of using the generic and non-generic versions of the
CompareTo method for several base types:

Boolean:  True is equal to True
Byte:     1 is equal to 1
Int16:    -2 is less than 2
Int32:    3 is equal to 3
Int64:    4 is greater than -4
Decimal:  -5.5 is less than 5.5
Single:   6.6 is equal to 6.6
Double:   7.7 is greater than -7.7
Char:     A is equal to A
String:   abc is equal to abc
DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
TimeSpan: 11.22:33:44 is equal to 11.22:33:44
Version:  1.2.333.4 is less than 2.0
Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
aa0057b223

The following types are not CLS-compliant:
SByte:    8 is equal to 8
UInt16:   9 is equal to 9
UInt32:   10 is equal to 10
UInt64:   11 is equal to 11
*/
' This example demonstrates the generic and non-generic versions of the 
' CompareTo method for several base types.
' The non-generic version takes a parameter of type Object, while the generic
' version takes a type-specific parameter, such as Boolean, Int32, or Double.

Class Sample
   Public Shared Sub Main()
      Dim nl As String = Environment.NewLine
      Dim msg As String = _
          "{0}The following is the result of using the generic and non-generic{0}" & _
          "versions of the CompareTo method for several base types:{0}"
      
      Dim now As DateTime = DateTime.Now
      ' Time span = 11 days, 22 hours, 33 minutes, 44 seconds
      Dim tsX As New TimeSpan(11, 22, 33, 44)
      ' Version = 1.2.333.4
      Dim versX As New Version("1.2.333.4")
      ' Guid = CA761232-ED42-11CE-BACD-00AA0057B223
      Dim guidX As New Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}")
      
      Dim a1 As [Boolean] = True,    a2 As [Boolean] = True
      Dim b1 As [Byte] = 1,          b2 As [Byte] = 1
      Dim c1 As Int16 = -2,          c2 As Int16 = 2
      Dim d1 As Int32 = 3,           d2 As Int32 = 3
      Dim e1 As Int64 = 4,           e2 As Int64 = -4
      Dim f1 As [Decimal] = -5.5D,   f2 As [Decimal] = 5.5D
      Dim g1 As [Single] = 6.6F,     g2 As [Single] = 6.6F
      Dim h1 As [Double] = 7.7,      h2 As [Double] = -7.7
      Dim i1 As [Char] = "A"c,       i2 As [Char] = "A"c
      Dim j1 As String = "abc",      j2 As String = "abc"
      Dim k1 As DateTime = now,      k2 As DateTime = now
      Dim l1 As TimeSpan = tsX,      l2 As TimeSpan = tsX
      Dim m1 As Version = versX,     m2 As New Version("2.0")
      Dim n1 As Guid = guidX,        n2 As Guid = guidX
      
      ' The following types are not CLS-compliant.
      ' SByte, UInt16, UInt32, UInt64

      Console.WriteLine(msg, nl)
      Try
         ' The second and third Show method call parameters are automatically boxed because
         ' the second and third Show method declaration arguments expect type Object.

         Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo(CObj(a2)))
         Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo(CObj(b2)))
         Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo(CObj(c2)))
         Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo(CObj(d2)))
         Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo(CObj(e2)))
         Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo(CObj(f2)))
         Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo(CObj(g2)))
         Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo(CObj(h2)))
         Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo(CObj(i2)))
         Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo(CObj(j2)))
         Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo(CObj(k2)))
         Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo(CObj(l2)))
         Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo(CObj(m2)))
         Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo(CObj(n2)))
         '
         Console.WriteLine("{0}The following types are not CLS-compliant:", nl)
         Console.WriteLine("SByte, UInt16, UInt32, UInt64")

      Catch e As Exception
         Console.WriteLine(e)
      End Try
   End Sub
   
   Public Shared Sub Show(caption As String, var1 As [Object], var2 As [Object], _
                          resultGeneric As Integer, resultNonGeneric As Integer)
      Dim relation As String
      
      Console.Write(caption)
      If resultGeneric = resultNonGeneric Then
         If resultGeneric < 0 Then
            relation = "less than"
         ElseIf resultGeneric > 0 Then
            relation = "greater than"
         Else
            relation = "equal to"
         End If
         Console.WriteLine("{0} is {1} {2}", var1, relation, var2)
      
      ' The following condition will never occur because the generic and non-generic
      ' CompareTo methods are equivalent.

      Else
         Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", _
                            resultGeneric, resultNonGeneric)
      End If
   End Sub
End Class
'
'This example produces the following results:
'
'The following is the result of using the generic and non-generic versions of the
'CompareTo method for several base types:
'
'Boolean:  True is equal to True
'Byte:     1 is equal to 1
'Int16:    -2 is less than 2
'Int32:    3 is equal to 3
'Int64:    4 is greater than -4
'Decimal:  -5.5 is less than 5.5
'Single:   6.6 is equal to 6.6
'Double:   7.7 is greater than -7.7
'Char:     A is equal to A
'String:   abc is equal to abc
'DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
'TimeSpan: 11.22:33:44 is equal to 11.22:33:44
'Version:  1.2.333.4 is less than 2.0
'Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
'aa0057b223
'
'The following types are not CLS-compliant:
'SByte, UInt16, UInt32, UInt64
'

Комментарии

Этот метод реализует System.IComparable<T> интерфейс и работает немного лучше, чем метод , Decimal.CompareTo так как ему не нужно преобразовывать value параметр в объект .

В зависимости от языка программирования можно накодировать метод, в котором CompareTo тип параметра имеет меньше битов (является более узким), чем тип экземпляра. Это возможно, так как некоторые языки программирования выполняют неявное расширяющее преобразование, представляющее параметр как тип с таким количеством битов, как экземпляр.

Например, предположим, что тип экземпляра — , Int32 а тип параметра — Byte. Компилятор Майкрософт C# создает инструкции для представления параметра в виде Int32 объекта, а затем создает Int32.CompareTo метод для сравнения значений экземпляра Int32 и Int32 представления параметра.

Ознакомьтесь с документацией по языку программирования, чтобы определить, выполняет ли его компилятор неявное расширение преобразований числовых типов.

См. также раздел

Применяется к

CompareTo(Object)

Исходный код:
Decimal.cs
Исходный код:
Decimal.cs
Исходный код:
Decimal.cs

Сравнивает этот экземпляр с заданным объектом и возвращает сравнение значений этих объектов.

public:
 virtual int CompareTo(System::Object ^ value);
public int CompareTo (object? value);
public int CompareTo (object value);
abstract member CompareTo : obj -> int
override this.CompareTo : obj -> int
Public Function CompareTo (value As Object) As Integer

Параметры

value
Object

Объект, который следует сравнить с этим экземпляром, или значение null.

Возвращаемое значение

Число со знаком, представляющее относительные значения этого экземпляра и параметра value.

Возвращаемое значение Значение
Меньше нуля Этот экземпляр меньше параметра value.
Нуль Этот экземпляр и параметр value равны.
Больше нуля Этот экземпляр больше параметра value или параметр value равен значению null.

Реализации

Исключения

value не является объектом типа Decimal.

Примеры

В следующем примере кода несколько и другие объекты сравниваются Decimal с ссылочным Decimal значением CompareTo с помощью метода .

// Example of the Decimal::CompareTo and Decimal::Equals instance 
// methods.
using namespace System;

// Get the exception type name; remove the namespace prefix.
String^ GetExceptionType( Exception^ ex )
{
   String^ exceptionType = ex->GetType()->ToString();
   return exceptionType->Substring( exceptionType->LastIndexOf( '.' ) + 1 );
}


// Compare the Decimal to the Object parameters, 
// and display the Object parameters with the results.
void CompDecimalToObject( Decimal Left, Object^ Right, String^ RightText )
{
   Console::WriteLine( "{0,-46}{1}", String::Concat( "Object: ", RightText ), Right );
   Console::WriteLine( "{0,-46}{1}", "Left.Equals( Object )", Left.Equals( Right ) );
   Console::Write( "{0,-46}", "Left.CompareTo( Object )" );
   try
   {
      
      // Catch the exception if CompareTo( ) throws one.
      Console::WriteLine( "{0}\n", Left.CompareTo( Right ) );
   }
   catch ( Exception^ ex ) 
   {
      Console::WriteLine( "{0}\n", GetExceptionType( ex ) );
   }

}

int main()
{
   Console::WriteLine( "This example of the Decimal::Equals( Object* ) and \n"
   "Decimal::CompareTo( Object* ) methods generates the \n"
   "following output. It creates several different "
   "Decimal \nvalues and compares them with the following "
   "reference value.\n" );
   
   // Create a reference Decimal value.
   Decimal Left = Decimal(987.654);
   Console::WriteLine( "{0,-46}{1}\n", "Left: Decimal( 987.654 )", Left );
   
   // Create objects to compare with the reference.
   CompDecimalToObject( Left, Decimal(9.8765400E+2), "Decimal( 9.8765400E+2 )" );
   CompDecimalToObject( Left, Decimal::Parse( "987.6541" ), "Decimal::Parse( \"987.6541\" )" );
   CompDecimalToObject( Left, Decimal::Parse( "987.6539" ), "Decimal::Parse( \"987.6539\" )" );
   CompDecimalToObject( Left, Decimal(987654000,0,0,false,6), "Decimal( 987654000, 0, 0, false, 6 )" );
   CompDecimalToObject( Left, 9.8765400E+2, "Double 9.8765400E+2" );
   CompDecimalToObject( Left, "987.654", "String \"987.654\"" );
}

/*
This example of the Decimal::Equals( Object* ) and
Decimal::CompareTo( Object* ) methods generates the
following output. It creates several different Decimal
values and compares them with the following reference value.

Left: Decimal( 987.654 )                      987.654

Object: Decimal( 9.8765400E+2 )               987.654
Left.Equals( Object )                         True
Left.CompareTo( Object )                      0

Object: Decimal::Parse( "987.6541" )          987.6541
Left.Equals( Object )                         False
Left.CompareTo( Object )                      -1

Object: Decimal::Parse( "987.6539" )          987.6539
Left.Equals( Object )                         False
Left.CompareTo( Object )                      1

Object: Decimal( 987654000, 0, 0, false, 6 )  987.654000
Left.Equals( Object )                         True
Left.CompareTo( Object )                      0

Object: Double 9.8765400E+2                   987.654
Left.Equals( Object )                         False
Left.CompareTo( Object )                      ArgumentException

Object: String "987.654"                      987.654
Left.Equals( Object )                         False
Left.CompareTo( Object )                      ArgumentException
*/
// Example of the decimal.CompareTo and decimal.Equals instance
// methods.
using System;

class DecCompToEqualsObjDemo
{
    // Get the exception type name; remove the namespace prefix.
    public static string GetExceptionType( Exception ex )
    {
        string exceptionType = ex.GetType( ).ToString( );
        return exceptionType.Substring(
            exceptionType.LastIndexOf( '.' ) + 1 );
    }

    // Compare the decimal to the object parameters,
    // and display the object parameters with the results.
    public static void CompDecimalToObject( decimal Left,
        object Right, string RightText )
    {

        Console.WriteLine( "{0,-46}{1}", "object: "+RightText,
            Right );
        Console.WriteLine( "{0,-46}{1}", "Left.Equals( object )",
            Left.Equals( Right ) );
        Console.Write( "{0,-46}", "Left.CompareTo( object )" );

        try
        {
            // Catch the exception if CompareTo( ) throws one.
            Console.WriteLine( "{0}\n", Left.CompareTo( Right ) );
        }
        catch( Exception ex )
        {
            Console.WriteLine( "{0}\n", GetExceptionType( ex ) );
        }
    }

    public static void Main( )
    {
        Console.WriteLine(
            "This example of the decimal.Equals( object ) and \n" +
            "decimal.CompareTo( object ) methods generates the \n" +
            "following output. It creates several different " +
            "decimal \nvalues and compares them with the following " +
            "reference value.\n" );

        // Create a reference decimal value.
        decimal Left = new decimal( 987.654 );

        Console.WriteLine( "{0,-46}{1}\n",
            "Left: decimal( 987.654 )", Left );

        // Create objects to compare with the reference.
        CompDecimalToObject( Left, new decimal( 9.8765400E+2 ),
            "decimal( 9.8765400E+2 )" );
        CompDecimalToObject( Left, 987.6541M, "987.6541D" );
        CompDecimalToObject( Left, 987.6539M, "987.6539D" );
        CompDecimalToObject( Left,
            new decimal( 987654000, 0, 0, false, 6 ),
            "decimal( 987654000, 0, 0, false, 6 )" );
        CompDecimalToObject( Left, 9.8765400E+2,
            "Double 9.8765400E+2" );
        CompDecimalToObject( Left, "987.654", "String \"987.654\"" );
    }
}

/*
This example of the decimal.Equals( object ) and
decimal.CompareTo( object ) methods generates the
following output. It creates several different decimal
values and compares them with the following reference value.

Left: decimal( 987.654 )                      987.654

object: decimal( 9.8765400E+2 )               987.654
Left.Equals( object )                         True
Left.CompareTo( object )                      0

object: 987.6541D                             987.6541
Left.Equals( object )                         False
Left.CompareTo( object )                      -1

object: 987.6539D                             987.6539
Left.Equals( object )                         False
Left.CompareTo( object )                      1

object: decimal( 987654000, 0, 0, false, 6 )  987.654000
Left.Equals( object )                         True
Left.CompareTo( object )                      0

object: Double 9.8765400E+2                   987.654
Left.Equals( object )                         False
Left.CompareTo( object )                      ArgumentException

object: String "987.654"                      987.654
Left.Equals( object )                         False
Left.CompareTo( object )                      ArgumentException
*/
// Example of the decimal.CompareTo and decimal.Equals instance
// methods.
open System

// Get the exception type name remove the namespace prefix.
let getExceptionType (ex: exn) =
    let exceptionType = ex.GetType() |> string
    exceptionType.Substring(exceptionType.LastIndexOf '.'  + 1)

// Compare the decimal to the object parameters,
// and display the object parameters with the results.
let compDecimalToObject (left: decimal) (right: obj) (rightText: string) =
    printfn $"object: %-38s{rightText}{right}"
    printfn $"""%-46s{"left.Equals(object)"}{left.Equals right}"""       
    printf $"""%-46s{"left.CompareTo(object)"}"""

    try
        // Catch the exception if CompareTo( ) throws one.
        printfn $"{left.CompareTo right}\n"
    with ex ->
        printfn $"{getExceptionType ex}\n"

Console.WriteLine(
    "This example of the decimal.Equals( object ) and \n" +
    "decimal.CompareTo( object ) methods generates the \n" +
    "following output. It creates several different " +
    "decimal \nvalues and compares them with the following " +
    "reference value.\n" )

// Create a reference decimal value.
let left = decimal 987.654

printfn $"""{"Left: decimal(987.654)",-46}{left}\n"""

// Create objects to compare with the reference.
compDecimalToObject left (decimal 9.8765400E+2 ) "decimal(9.8765400E+2)"
compDecimalToObject left 987.6541M "987.6541D"
compDecimalToObject left 987.6539M "987.6539D"
compDecimalToObject left (Decimal(987654000, 0, 0, false, 6uy)) "Decimal(987654000, 0, 0, false, 6)"
compDecimalToObject left 9.8765400E+2 "Double 9.8765400E+2"
compDecimalToObject left "987.654" "String \"987.654\""


// This example of the Decimal.Equals(object) and
// Decimal.CompareTo(object) methods generates the
// following output. It creates several different decimal
// values and compares them with the following reference value.
// Left: decimal(987.654)                        987.654
//
// object: decimal(9.8765400E+2)                 987.654
// left.Equals(object)                           True
// left.CompareTo(object)                        0
//
// object: 987.6541D                             987.6541
// left.Equals(object)                           False
// left.CompareTo(object)                        -1
//
// object: 987.6539D                             987.6539
// left.Equals(object)                           False
// left.CompareTo(object)                        1
//
// object: Decimal(987654000, 0, 0, false, 6)    987.654000
// left.Equals(object)                           True
// left.CompareTo(object)                        0
//
// object: Double 9.8765400E+2                   987.654
// left.Equals(object)                           False
// left.CompareTo(object)                        ArgumentException
//
// object: String "987.654"                      987.654
// left.Equals(object)                           False
// left.CompareTo(object)                        ArgumentException
' Example of the Decimal.CompareTo and Decimal.Equals instance methods.
Module DecCompToEqualsObjDemo
    
    ' Get the exception type name; remove the namespace prefix.
    Function GetExceptionType( ex As Exception ) As String

        Dim exceptionType   As String = ex.GetType( ).ToString( )
        Return exceptionType.Substring( _
            exceptionType.LastIndexOf( "."c ) + 1 )
    End Function

    ' Compare the Decimal to the Object parameters, 
    ' and display the Object parameters with the results.
    Sub CompDecimalToObject( Left as Decimal, Right as Object, _
        RightText as String )

        Console.WriteLine( "{0,-46}{1}", "Object: " & RightText, _
            Right )
        Console.WriteLine( "{0,-46}{1}", "Left.Equals( Object )", _
            Left.Equals( Right ) )
        Console.Write( "{0,-46}", "Left.CompareTo( Object )" )

        ' Catch the exception if CompareTo( ) throws one.
        Try
            Console.WriteLine( "{0}" & vbCrLf, _
                Left.CompareTo( Right ) )
        Catch ex As Exception
            Console.WriteLine( "{0}" & vbCrLf, _
                GetExceptionType( ex ) )
        End Try
    End Sub

    Sub Main( )
        Console.WriteLine( _
            "This example of the Decimal.Equals( Object ) " & _
            "and " & vbCrLf & "Decimal.CompareTo( Object ) " & _
            "methods generates the " & vbCrLf & _
            "following output. It creates several different " & _
            "Decimal " & vbCrLf & "values and compares them " & _
            "with the following reference value." & vbCrLf )

        ' Create a reference Decimal value.
        Dim Left as New Decimal( 987.654 )

        Console.WriteLine( "{0,-46}{1}" & vbCrLf, _
            "Left: Decimal( 987.654 )", Left )

        ' Create objects to compare with the reference.
        CompDecimalToObject( Left, New Decimal( 9.8765400E+2 ), _
            "Decimal( 9.8765400E+2 )" )
        CompDecimalToObject( Left, 987.6541D, "987.6541D" )
        CompDecimalToObject( Left, 987.6539D, "987.6539D" )
        CompDecimalToObject( Left, _
            New Decimal( 987654000, 0, 0, false, 6 ), _
            "Decimal( 987654000, 0, 0, false, 6 )" )
        CompDecimalToObject( Left, 9.8765400E+2, _
            "Double 9.8765400E+2" )
        CompDecimalToObject( Left, "987.654", _
            "String ""987.654""" )
    End Sub
End Module 

' This example of the Decimal.Equals( Object ) and
' Decimal.CompareTo( Object ) methods generates the
' following output. It creates several different Decimal
' values and compares them with the following reference value.
' 
' Left: Decimal( 987.654 )                      987.654
' 
' Object: Decimal( 9.8765400E+2 )               987.654
' Left.Equals( Object )                         True
' Left.CompareTo( Object )                      0
' 
' Object: 987.6541D                             987.6541
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      -1
' 
' Object: 987.6539D                             987.6539
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      1
' 
' Object: Decimal( 987654000, 0, 0, false, 6 )  987.654000
' Left.Equals( Object )                         True
' Left.CompareTo( Object )                      0
' 
' Object: Double 9.8765400E+2                   987.654
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      ArgumentException
' 
' Object: String "987.654"                      987.654
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      ArgumentException

Комментарии

Любой Decimalэкземпляр , независимо от его значения, считается больше .null

Параметр value должен быть null или экземпляром Decimal; в противном случае создается исключение.

См. также раздел

Применяется к