Поделиться через


CounterSample Конструкторы

Определение

Инициализирует новый экземпляр структуры CounterSample.

Перегрузки

CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType)

Инициализирует новый экземпляр структуры CounterSample и задает свойству CounterTimeStamp значение 0 (ноль).

CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64)

Инициализирует новый экземпляр структуры CounterSample и задает передаваемое значение свойству CounterTimeStamp.

CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType)

Исходный код:
CounterSample.cs
Исходный код:
CounterSample.cs
Исходный код:
CounterSample.cs

Инициализирует новый экземпляр структуры CounterSample и задает свойству CounterTimeStamp значение 0 (ноль).

public:
 CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType);
public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType);
new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType -> System.Diagnostics.CounterSample
Public Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType)

Параметры

rawValue
Int64

Числовое значение, связанное с образцом счетчика производительности.

baseValue
Int64

Дополнительное базовое начальное значение для счетчика, используемое, только если в основе образца лежат несколько счетчиков.

counterFrequency
Int64

Частота, с которой счетчик считывается.

systemFrequency
Int64

Частота, с которой данные счетчика считываются системой.

timeStamp
Int64

Начальный штамп времени.

timeStamp100nSec
Int64

Начальный штамп времени с высокой точностью.

counterType
PerformanceCounterType

Объект PerformanceCounterType, указывающий тип счетчика, для которого данный образец является снимком.

Комментарии

Используйте этот конструктор для получения начальной выборки счетчика производительности. Системный монитор автоматически предоставляет значения для этих параметров при первом вызове NextSample метода.

Применяется к

CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64)

Исходный код:
CounterSample.cs
Исходный код:
CounterSample.cs
Исходный код:
CounterSample.cs

Инициализирует новый экземпляр структуры CounterSample и задает передаваемое значение свойству CounterTimeStamp.

public:
 CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType, long counterTimeStamp);
public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType, long counterTimeStamp);
new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType * int64 -> System.Diagnostics.CounterSample
Public Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType, counterTimeStamp As Long)

Параметры

rawValue
Int64

Числовое значение, связанное с образцом счетчика производительности.

baseValue
Int64

Дополнительное базовое начальное значение для счетчика, используемое, только если в основе образца лежат несколько счетчиков.

counterFrequency
Int64

Частота, с которой счетчик считывается.

systemFrequency
Int64

Частота, с которой данные счетчика считываются системой.

timeStamp
Int64

Начальный штамп времени.

timeStamp100nSec
Int64

Начальный штамп времени с высокой точностью.

counterType
PerformanceCounterType

Объект PerformanceCounterType, указывающий тип счетчика, для которого данный образец является снимком.

counterTimeStamp
Int64

Время получения образца.

Примеры

В следующем примере показано, как инициализировать новую CounterSample структуру, передавая значения для rawValueпараметров , baseValue, counterFrequency, systemFrequencytimeStamp, timeStamp100nSeccounterType, и counterTimeStamp . После создания CounterSample структуры в примере отображаются значения свойств для в CounterSample окне консоли.

PerformanceCounter^ myPerformanceCounter1 = gcnew PerformanceCounter(
   "Processor","% Processor Time","0" );
CounterSample myCounterSample1( 10L, 20L, 30L, 40L, 50L, 60L,
  PerformanceCounterType::AverageCount64 );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample1.CounterTimeStamp );

Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );
PerformanceCounter myPerformanceCounter1 = new PerformanceCounter
   ("Processor","% Processor Time", "0");
CounterSample myCounterSample1 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
                     PerformanceCounterType.AverageCount64);
Console.WriteLine("CounterTimeStamp = "+myCounterSample1.CounterTimeStamp);

Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);
Dim myPerformanceCounter1 As New PerformanceCounter("Processor", _
                                            "% Processor Time", "0")
Dim myCounterSample1 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
                               PerformanceCounterType.AverageCount64)
Console.WriteLine("CounterTimeStamp = " & myCounterSample1.CounterTimeStamp)

Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)
' Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample()

Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)
PerformanceCounter^ myPerformanceCounter2 =
   gcnew PerformanceCounter( "Processor","% Processor Time","0" );
CounterSample myCounterSample2( 10L, 20L, 30L, 40L, 50L, 60L,
  PerformanceCounterType::AverageCount64,300);
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
PerformanceCounter myPerformanceCounter2 = new PerformanceCounter
   ("Processor","% Processor Time", "0");
CounterSample myCounterSample2 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
               PerformanceCounterType.AverageCount64, 300);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
Dim myPerformanceCounter2 As New PerformanceCounter("Processor", _
                                             "% Processor Time", "0")
Dim myCounterSample2 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
                         PerformanceCounterType.AverageCount64, 300)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)

' Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample()
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)

Комментарии

Используйте этот конструктор для получения примеров после того, как вы уже взяли начальную выборку счетчика производительности. Системный монитор автоматически предоставляет значения для этих параметров при вызове NextSample метода .

Применяется к