String.Compare Метод
Определение
Важно!
Некоторые сведения относятся к предварительной версии продукта, в которую до выпуска могут быть внесены существенные изменения. Майкрософт не предоставляет никаких гарантий, явных или подразумеваемых, относительно приведенных здесь сведений.
Сравнивает два указанных объекта String и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
Перегрузки
Compare(String, Int32, String, Int32, Int32, CultureInfo, CompareOptions) |
Сравнивает подстроки двух заданных объектов String, используя указанные параметры сравнения и сведения о языке и региональных параметрах, которые влияют на сравнение, и возвращает целое число, показывающее связь между двумя подстроками в порядке сортировки. |
Compare(String, Int32, String, Int32, Int32, Boolean, CultureInfo) |
Сравнивает подстроки двух заданных объектов String (с учетом или без учета регистра), используя сведения о языке и региональных параметрах, и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Compare(String, Int32, String, Int32, Int32, StringComparison) |
Сравнивает подстроки двух указанных объектов String с использованием заданных правил и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Compare(String, Int32, String, Int32, Int32, Boolean) |
Сравнивает подстроки двух заданных объектов String (с учетом или без учета регистра) и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Compare(String, Int32, String, Int32, Int32) |
Сравнивает подстроки двух указанных объектов String и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Compare(String, String, CultureInfo, CompareOptions) |
Сравнивает два заданных объекта String, используя указанные параметры сравнения и сведения о языке и региональных параметрах, которые влияют на сравнение, и возвращает целое число, показывающее связь между двумя строками в порядке сортировки. |
Compare(String, String, Boolean, CultureInfo) |
Сравнивает два указанных объекта String (с учетом или без учета регистра), используя сведения о языке и региональных параметрах, и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Compare(String, String, StringComparison) |
Сравнивает два указанных объекта String с использованием заданных правил и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Compare(String, String, Boolean) |
Сравнивает два указанных объекта String (с учетом или без учета регистра) и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Compare(String, String) |
Сравнивает два указанных объекта String и возвращает целое число, которое показывает их относительное положение в порядке сортировки. |
Комментарии
Все перегрузки метода Compare возвращают 32-разрядное целое число со знаком, выражающее лексическое соотношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | Первая подстрока предшествует второй в порядке сортировки. |
Нуль | Подстроки появляются в той же позиции в порядке сортировки, или параметр length равен нулю. |
Больше нуля | Первая подстрока следует за второй в порядке сортировки. |
Предупреждение
По возможности следует вызывать перегрузку Compare метода , включающую StringComparison параметр . Дополнительные сведения см. в разделе Рекомендации по использованию строк.
Compare(String, Int32, String, Int32, Int32, CultureInfo, CompareOptions)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает подстроки двух заданных объектов String, используя указанные параметры сравнения и сведения о языке и региональных параметрах, которые влияют на сравнение, и возвращает целое число, показывающее связь между двумя подстроками в порядке сортировки.
public:
static int Compare(System::String ^ strA, int indexA, System::String ^ strB, int indexB, int length, System::Globalization::CultureInfo ^ culture, System::Globalization::CompareOptions options);
public static int Compare (string? strA, int indexA, string? strB, int indexB, int length, System.Globalization.CultureInfo? culture, System.Globalization.CompareOptions options);
public static int Compare (string strA, int indexA, string strB, int indexB, int length, System.Globalization.CultureInfo culture, System.Globalization.CompareOptions options);
static member Compare : string * int * string * int * int * System.Globalization.CultureInfo * System.Globalization.CompareOptions -> int
Public Shared Function Compare (strA As String, indexA As Integer, strB As String, indexB As Integer, length As Integer, culture As CultureInfo, options As CompareOptions) As Integer
Параметры
- strA
- String
Первая из сравниваемых строк.
- indexA
- Int32
Начальная позиция подстроки в пределах strA
.
- strB
- String
Вторая из сравниваемых строк.
- indexB
- Int32
Начальная позиция подстроки в пределах strB
.
- length
- Int32
Максимальное число сравниваемых знаков в подстроках.
- culture
- CultureInfo
Объект, предоставляющий сведения об особенностях сравнения, определяемых языком и региональными параметрами. Если значением параметра culture
является null
, используется текущий язык и региональные параметры.
- options
- CompareOptions
Параметры, которые используются во время сравнения (например, игнорирование регистра или символов).
Возвращаемое значение
Целое число, которое указывает на лексические отношения между двумя подстроками, как показано в следующей таблице.
Значение | Условие |
---|---|
Меньше нуля | Подстрока в strA предшествует подстроке в strB в порядке сортировки.
|
Нуль | Подстроки появляются в той же позиции в порядке сортировки, или параметр length равен нулю.
|
Больше нуля | Подстрока в strA следует за подстрокой в strB в порядке сортировки.
|
Исключения
options
не является значением CompareOptions.
Значение indexA
больше значения strA
.Length
.
-или-
Значение indexB
больше значения strB
.Length
.
-или-
indexA
, indexB
или length
является отрицательным значением.
-или-
strA
или strB
равно null
, а length
больше нуля.
Примеры
В следующем примере метод используется Compare(String, Int32, String, Int32, Int32, CultureInfo, CompareOptions) для сравнения фамилий двух людей. Затем они перечислены в алфавитном порядке.
string name1 = "Jack Smith";
string name2 = "John Doe";
// Get position of character after the space character.
int index1 = name1.IndexOf(" ");
index1 = index1 < 0 ? 0 : ++index1;
int index2 = name2.IndexOf(" ");
index2 = index2 < 0 ? 0 : ++index2;
int length = Math.Max(name1.Length, name2.Length);
Console.WriteLine("Sorted alphabetically by last name:");
if (String.Compare(name1, index1, name2, index2, length,
new CultureInfo("en-US"), CompareOptions.IgnoreCase) < 0)
Console.WriteLine("{0}\n{1}", name1, name2);
else
Console.WriteLine("{0}\n{1}", name2, name1);
// The example displays the following output:
// Sorted alphabetically by last name:
// John Doe
// Jack Smith
open System
open System.Globalization
let name1 = "Jack Smith"
let name2 = "John Doe"
// Get position of character after the space character.
let index1 =
let i = name1.IndexOf " "
if i < 0 then 0 else i + 1
let index2 =
let i = name2.IndexOf " "
if i < 0 then 0 else i + 1
let length = max name1.Length name2.Length
printfn "Sorted alphabetically by last name:"
if String.Compare(name1, index1, name2, index2, length, CultureInfo "en-US", CompareOptions.IgnoreCase) < 0 then
printfn $"{name1}\n{name2}"
else
printfn $"{name2}\n{name1}"
// The example displays the following output:
// Sorted alphabetically by last name:
// John Doe
// Jack Smith
Imports System.Globalization
Module Example
Public Sub Main()
Dim name1 As String = "Jack Smith"
Dim name2 = "John Doe"
' Get position of space character.
Dim index1 As Integer = name1.IndexOf(" ")
index1 = CInt(IIf(index1 < 0, 0, index1 - 1))
Dim index2 As Integer = name2.IndexOf(" ")
index1 = CInt(IIf(index1 < 0, 0, index1 - 1))
Dim length As Integer = Math.Max(name1.Length, name2.Length)
Console.WriteLIne("Sorted alphabetically by last name:")
If String.Compare(name1, index1, name2, index2, length, _
New CultureInfo("en-US"), CompareOptions.IgnoreCase) < 0 Then
Console.WriteLine("{0}{1}{2}", name1, vbCrLf, name2)
Else
Console.WriteLine("{0}{1}{2}", name2, vbCrLf, name1)
End If
End Sub
End Module
' The example displays the following output;
' Sorted alphabetically by last name:
' John Doe
' Jack Smith
Комментарии
Подстроки для сравнения начинаются с strA
позиции indexA
и в strB
позиции indexB
. Длина первой подстроки равна длине strA
минус indexA
. Длина второй подстроки равна длине strB
минус indexB
.
Количество сравниваемых символов меньше длины двух подстрок, и length
. Параметры indexA
, indexB
и length
должны быть нерицательными.
Для сравнения используется culture
параметр для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, определенный язык и региональные параметры могут указывать, что определенные сочетания символов обрабатываются как один символ, что символы в верхнем и нижнем регистре сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Внимание!
Метод Compare(String, Int32, String, Int32, Int32, CultureInfo, CompareOptions) предназначен в основном для использования в операциях сортировки или алфавитизации. Его не следует использовать, если основная цель вызова метода заключается в определении эквивалентности двух подстрок (то есть, когда цель вызова метода заключается в проверке возвращаемого значения, равного нулю). Чтобы определить, эквивалентны ли две строки, вызовите Equals метод .
Один или оба из и strA
strB
могут иметь значение null
. По определению любая строка, включая String.Empty, сравнивает больше пустой ссылки, а две пустые ссылки сравниваются равными друг другу.
Сравнение может быть дополнительно задано параметром options
, который состоит из одного или нескольких элементов перечисления System.Globalization.CompareOptions . Однако, поскольку этот метод предназначен для сравнения строк с учетом языка и региональных параметров, значения и CompareOptions.OrdinalIgnoreCase не оказывают никакого CompareOptions.Ordinal влияния.
Сравнение завершается при обнаружении неравенства или сравнении обеих подстрок. Однако если две строки сравниваются равными концу одной строки, а в другой строке осталось символов, строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, Int32, String, Int32, Int32, CultureInfo, CompareOptions) не учитывает эти символы при выполнении лингвистического сравнения или сравнения с учетом языка и региональных параметров. Чтобы распознать игнорируемые символы в сравнении Ordinal , укажите значение или OrdinalIgnoreCase для options
параметра .
См. также раздел
Применяется к
Compare(String, Int32, String, Int32, Int32, Boolean, CultureInfo)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает подстроки двух заданных объектов String (с учетом или без учета регистра), используя сведения о языке и региональных параметрах, и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, int indexA, System::String ^ strB, int indexB, int length, bool ignoreCase, System::Globalization::CultureInfo ^ culture);
public static int Compare (string? strA, int indexA, string? strB, int indexB, int length, bool ignoreCase, System.Globalization.CultureInfo? culture);
public static int Compare (string strA, int indexA, string strB, int indexB, int length, bool ignoreCase, System.Globalization.CultureInfo culture);
static member Compare : string * int * string * int * int * bool * System.Globalization.CultureInfo -> int
Public Shared Function Compare (strA As String, indexA As Integer, strB As String, indexB As Integer, length As Integer, ignoreCase As Boolean, culture As CultureInfo) As Integer
Параметры
- strA
- String
Первая из сравниваемых строк.
- indexA
- Int32
Позиция подстроки в strA
.
- strB
- String
Вторая из сравниваемых строк.
- indexB
- Int32
Позиция подстроки в strB
.
- length
- Int32
Максимальное число сравниваемых знаков в подстроках.
- ignoreCase
- Boolean
Значение true
, чтобы не учитывать регистр при сравнении; в противном случае — значение false
.
- culture
- CultureInfo
Объект, предоставляющий сведения об особенностях сравнения, определяемых языком и региональными параметрами. Если значением параметра culture
является null
, используется текущий язык и региональные параметры.
Возвращаемое значение
Целое число, выражающее лексическое соотношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | Подстрока в strA предшествует подстроке в strB в порядке сортировки.
|
Нуль | Подстроки появляются в той же позиции в порядке сортировки, или параметр length равен нулю.
|
Больше нуля | Подстрока в strA следует за подстрокой в strB в порядке сортировки.
|
Исключения
Значение indexA
больше значения strA
Length.
-или-
Значение indexB
больше значения strB
Length.
-или-
indexA
, indexB
или length
является отрицательным значением.
-или-
strA
или strB
равно null
, а length
больше нуля.
Примеры
В следующем примере сравниваются две подстроки с использованием разных языков и региональных параметров и без учета регистра подстрок. Выбор языка и региональных параметров влияет на то, как сравнивается буква "I".
// Sample for String::Compare(String, Int32, String, Int32, Int32, Boolean, CultureInfo)
using namespace System;
using namespace System::Globalization;
int main()
{
// 0123456
String^ str1 = "MACHINE";
String^ str2 = "machine";
String^ str;
int result;
Console::WriteLine();
Console::WriteLine( "str1 = '{0}', str2 = '{1}'", str1, str2 );
Console::WriteLine( "Ignore case, Turkish culture:" );
result = String::Compare( str1, 4, str2, 4, 2, true, gcnew CultureInfo( "tr-TR" ) );
str = ((result < 0) ? "less than" : ((result > 0) ? (String^)"greater than" : "equal to"));
Console::Write( "Substring '{0}' in '{1}' is ", str1->Substring( 4, 2 ), str1 );
Console::Write( " {0} ", str );
Console::WriteLine( "substring '{0}' in '{1}'.", str2->Substring( 4, 2 ), str2 );
Console::WriteLine();
Console::WriteLine( "Ignore case, invariant culture:" );
result = String::Compare( str1, 4, str2, 4, 2, true, CultureInfo::InvariantCulture );
str = ((result < 0) ? "less than" : ((result > 0) ? (String^)"greater than" : "equal to"));
Console::Write( "Substring '{0}' in '{1}' is ", str1->Substring( 4, 2 ), str1 );
Console::Write( " {0} ", str );
Console::WriteLine( "substring '{0}' in '{1}'.", str2->Substring( 4, 2 ), str2 );
}
/*
This example produces the following results:
str1 = 'MACHINE', str2 = 'machine'
Ignore case, Turkish culture:
Substring 'IN' in 'MACHINE' is less than substring 'in' in 'machine'.
Ignore case, invariant culture:
Substring 'IN' in 'MACHINE' is equal to substring 'in' in 'machine'.
*/
// Sample for String.Compare(String, Int32, String, Int32, Int32, Boolean, CultureInfo)
using System;
using System.Globalization;
class Sample5
{
public static void Main()
{
// 0123456
String str1 = "MACHINE";
String str2 = "machine";
String str;
int result;
Console.WriteLine();
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2);
Console.WriteLine("Ignore case, Turkish culture:");
result = String.Compare(str1, 4, str2, 4, 2, true, new CultureInfo("tr-TR"));
str = ((result < 0) ? "less than" : ((result > 0) ? "greater than" : "equal to"));
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(4, 2), str1);
Console.Write("{0} ", str);
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(4, 2), str2);
Console.WriteLine();
Console.WriteLine("Ignore case, invariant culture:");
result = String.Compare(str1, 4, str2, 4, 2, true, CultureInfo.InvariantCulture);
str = ((result < 0) ? "less than" : ((result > 0) ? "greater than" : "equal to"));
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(4, 2), str1);
Console.Write("{0} ", str);
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(4, 2), str2);
}
}
/*
This example produces the following results:
str1 = 'MACHINE', str2 = 'machine'
Ignore case, Turkish culture:
Substring 'IN' in 'MACHINE' is less than substring 'in' in 'machine'.
Ignore case, invariant culture:
Substring 'IN' in 'MACHINE' is equal to substring 'in' in 'machine'.
*/
// Sample for String.Compare(String, Int32, String, Int32, Int32, Boolean, CultureInfo)
open System
open System.Globalization
// 0123456
let str1 = "MACHINE"
let str2 = "machine"
printfn $"\nstr1 = '{str1}', str2 = '{str2}'"
printfn "Ignore case, Turkish culture:"
let result = String.Compare(str1, 4, str2, 4, 2, true, CultureInfo "tr-TR")
let str = if result < 0 then "less than" elif result > 0 then "greater than" else "equal to"
printf $"Substring '{str1.Substring(4, 2)}' in '{str1}' is "
printf $"{str} "
printfn $"substring '{str2.Substring(4, 2)}' in '{str2}'."
printfn "\nIgnore case, invariant culture:"
let result2 = String.Compare(str1, 4, str2, 4, 2, true, CultureInfo.InvariantCulture)
let str3 = if result < 0 then "less than" elif result > 0 then "greater than" else "equal to"
printf $"Substring '{str1.Substring(4, 2)}' in '{str1}' is "
printf $"{str3} "
printfn $"substring '{str2.Substring(4, 2)}' in '{str2}'."
(*
This example produces the following results:
str1 = 'MACHINE', str2 = 'machine'
Ignore case, Turkish culture:
Substring 'IN' in 'MACHINE' is less than substring 'in' in 'machine'.
Ignore case, invariant culture:
Substring 'IN' in 'MACHINE' is equal to substring 'in' in 'machine'.
*)
' Sample for String.Compare(String, Int32, String, Int32, Int32, Boolean, CultureInfo)
Imports System.Globalization
Class Sample
Public Shared Sub Main()
' 0123456
Dim str1 As [String] = "MACHINE"
Dim str2 As [String] = "machine"
Dim str As [String]
Dim result As Integer
Console.WriteLine()
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2)
Console.WriteLine("Ignore case, Turkish culture:")
result = [String].Compare(str1, 4, str2, 4, 2, True, New CultureInfo("tr-TR"))
str = IIf(result < 0, "less than", IIf(result > 0, "greater than", "equal to"))
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(4, 2), str1)
Console.Write("{0} ", str)
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(4, 2), str2)
Console.WriteLine()
Console.WriteLine("Ignore case, invariant culture:")
result = [String].Compare(str1, 4, str2, 4, 2, True, CultureInfo.InvariantCulture)
str = IIf(result < 0, "less than", IIf(result > 0, "greater than", "equal to"))
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(4, 2), str1)
Console.Write("{0} ", str)
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(4, 2), str2)
End Sub
End Class
'
'This example produces the following results:
'
'str1 = 'MACHINE', str2 = 'machine'
'Ignore case, Turkish culture:
'Substring 'IN' in 'MACHINE' is less than substring 'in' in 'machine'.
'
'Ignore case, invariant culture:
'Substring 'IN' in 'MACHINE' is equal to substring 'in' in 'machine'.
'
Комментарии
Сравниваемая подстрока начинается с strA
indexA
, а в — в indexB
strB
. Оба indexA
значения и indexB
отсчитываются от нуля, то есть первый символ в strA
и strB
находится в нулевой позиции, а не в первой позиции. Длина первой подстроки равна длине strA
минус indexA
1. Длина второй подстроки равна длине strB
минус indexB
1.
Количество сравниваемых символов меньше длины двух подстрок, и length
. Параметры indexA
, indexB
и length
должны быть нерицательными.
В сравнении culture
используется параметр для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, язык и региональные параметры могут указывать, что определенные сочетания символов обрабатываются как один символ, а символы в верхнем и нижнем регистре сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Сравнение выполняется с помощью правил сортировки слов. Дополнительные сведения о сортировке слов, строк и порядковых номеров см. в разделе System.Globalization.CompareOptions.
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше пустой ссылки; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих подстрок. Однако если две строки сравниваются равными концу одной строки, а в другой строке осталось символов, то строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнения влияют правила регистра, относящиеся к языку и региональным параметрам. Например, на турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Сравните путь с именем "file" с помощью порядкового сравнения. Правильный код для этого выглядит следующим образом:
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, Int32, String, Int32, Int32, Boolean, CultureInfo) не учитывает эти символы при выполнении лингвистического сравнения или сравнения с учетом языка и региональных параметров. Чтобы распознать игнорируемые символы в сравнении Compare(String, Int32, String, Int32, Int32, CultureInfo, CompareOptions) , вызовите метод и укажите значение Ordinal или OrdinalIgnoreCase для options
параметра .
См. также раздел
Применяется к
Compare(String, Int32, String, Int32, Int32, StringComparison)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает подстроки двух указанных объектов String с использованием заданных правил и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, int indexA, System::String ^ strB, int indexB, int length, StringComparison comparisonType);
public static int Compare (string strA, int indexA, string strB, int indexB, int length, StringComparison comparisonType);
public static int Compare (string? strA, int indexA, string? strB, int indexB, int length, StringComparison comparisonType);
static member Compare : string * int * string * int * int * StringComparison -> int
Public Shared Function Compare (strA As String, indexA As Integer, strB As String, indexB As Integer, length As Integer, comparisonType As StringComparison) As Integer
Параметры
- strA
- String
Первая из сравниваемых строк.
- indexA
- Int32
Позиция подстроки в strA
.
- strB
- String
Вторая из сравниваемых строк.
- indexB
- Int32
Позиция подстроки в strB
.
- length
- Int32
Максимальное число сравниваемых знаков в подстроках.
- comparisonType
- StringComparison
Одно из значений перечисления, определяющее используемые при сравнении правила.
Возвращаемое значение
32-битовое целое число со знаком, выражающее лексическое отношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | Подстрока в strA предшествует подстроке в strB в порядке сортировки.
|
Нуль | Подстроки появляются в одной и той же позиции в порядке сортировки, или параметр length равен нулю.
|
Больше нуля | Подстрока в strA следует за подстрокой в strB в порядке сортировки.
|
Исключения
Значение indexA
больше значения strA
Length.
-или-
Значение indexB
больше значения strB
Length.
-или-
indexA
, indexB
или length
является отрицательным значением.
-или-
indexA
или indexB
равно null
, а length
больше нуля.
comparisonType
не является значением StringComparison.
Примеры
В следующем примере сравниваются две подстроки.
// Sample for String::Compare(String, Int32, String, Int32, Int32)
using namespace System;
int main()
{
// 0123456
String^ str1 = "machine";
String^ str2 = "device";
String^ str;
int result;
Console::WriteLine();
Console::WriteLine( "str1 = '{0}', str2 = '{1}'", str1, str2 );
result = String::Compare( str1, 2, str2, 0, 2 );
str = ((result < 0) ? "less than" : ((result > 0) ? (String^)"greater than" : "equal to"));
Console::Write( "Substring '{0}' in ' {1}' is ", str1->Substring( 2, 2 ), str1 );
Console::Write( " {0} ", str );
Console::WriteLine( "substring '{0}' in ' {1}'.", str2->Substring( 0, 2 ), str2 );
}
/*
This example produces the following results:
str1 = 'machine', str2 = 'device'
Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
*/
String str1 = "machine";
String str2 = "device";
String str;
int result;
Console.WriteLine();
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2);
result = String.Compare(str1, 2, str2, 0, 2);
str = ((result < 0) ? "less than" : ((result > 0) ? "greater than" : "equal to"));
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1);
Console.Write("{0} ", str);
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(0, 2), str2);
/*
This example produces the following results:
str1 = 'machine', str2 = 'device'
Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
*/
open System
let str1 = "machine"
let str2 = "device"
printfn "\nstr1 = '{str1}', str2 = '{str2}'"
let result = String.Compare(str1, 2, str2, 0, 2)
let str =
if result < 0 then "less than"
elif result > 0 then "greater than"
else "equal to"
printf $"Substring '{str1.Substring(2, 2)}' in '{str1}' is "
printf $"{str} "
printfn $"substring '{str2.Substring(0, 2)}' in '{str2}'."
(*
This example produces the following results:
str1 = 'machine', str2 = 'device'
Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
*)
' Sample for String.Compare(String, Int32, String, Int32, Int32)
Class Sample
Public Shared Sub Main()
' 0123456
Dim str1 As [String] = "machine"
Dim str2 As [String] = "device"
Dim str As [String]
Dim result As Integer
Console.WriteLine()
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2)
result = [String].Compare(str1, 2, str2, 0, 2)
str = IIf(result < 0, "less than", IIf(result > 0, "greater than", "equal to"))
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1)
Console.Write("{0} ", str)
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(0, 2), str2)
End Sub
End Class
'
'This example produces the following results:
'
'str1 = 'machine', str2 = 'device'
'Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
'
Комментарии
Подстроки для сравнения начинаются с strA
и indexA
в strB
indexB
. Оба indexA
значения и indexB
отсчитываются от нуля, то есть первый символ в strA
и strB
находится в нулевой позиции, а не в первой позиции. Длина первой подстроки равна длине strA
минус indexA
1. Длина второй подстроки равна длине strB
минус indexB
1.
Количество сравниваемых символов меньше длины двух подстрок, и length
. Параметры indexA
, indexB
и length
должны быть нерицательными.
Параметр comparisonType
указывает, следует ли при сравнении использовать текущий или инвариантный язык и региональные параметры, учитывать или игнорировать регистр сравнения, а также использовать слова (с учетом языка и региональных параметров) или порядковые правила сортировки (без учета языка и региональных параметров).
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше пустой ссылки; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих подстрок. Однако если две строки сравниваются равными концу одной строки, а в другой строке остались символы, строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнения влияют правила регистра, относящиеся к языку и региональным параметрам. Например, на турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Сравните путь с именем "file" с помощью порядкового сравнения. Правильный код для этого выглядит следующим образом:
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, Int32, String, Int32, Int32, StringComparison) не учитывает эти символы при выполнении лингвистического сравнения или сравнения с учетом языка и региональных параметров. Чтобы распознать игнорируемые символы в сравнении Ordinal , укажите значение или OrdinalIgnoreCase для comparisonType
параметра .
См. также раздел
Применяется к
Compare(String, Int32, String, Int32, Int32, Boolean)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает подстроки двух заданных объектов String (с учетом или без учета регистра) и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, int indexA, System::String ^ strB, int indexB, int length, bool ignoreCase);
public static int Compare (string? strA, int indexA, string? strB, int indexB, int length, bool ignoreCase);
public static int Compare (string strA, int indexA, string strB, int indexB, int length, bool ignoreCase);
static member Compare : string * int * string * int * int * bool -> int
Public Shared Function Compare (strA As String, indexA As Integer, strB As String, indexB As Integer, length As Integer, ignoreCase As Boolean) As Integer
Параметры
- strA
- String
Первая из сравниваемых строк.
- indexA
- Int32
Позиция подстроки в strA
.
- strB
- String
Вторая из сравниваемых строк.
- indexB
- Int32
Позиция подстроки в strB
.
- length
- Int32
Максимальное число сравниваемых знаков в подстроках.
- ignoreCase
- Boolean
Значение true
, чтобы не учитывать регистр при сравнении; в противном случае — значение false
.
Возвращаемое значение
32-битовое целое число со знаком, выражающее лексическое отношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | Подстрока в strA предшествует подстроке в strB в порядке сортировки.
|
Нуль | Подстроки появляются в той же позиции в порядке сортировки, или параметр length равен нулю.
|
Больше нуля | Подстрока в strA следует за подстрокой в strB в порядке сортировки.
|
Исключения
Значение indexA
больше значения strA
Length.
-или-
Значение indexB
больше значения strB
Length.
-или-
indexA
, indexB
или length
является отрицательным значением.
-или-
indexA
или indexB
равно null
, а length
больше нуля.
Примеры
В следующем примере выполняется два сравнения двух подстрок, которые отличаются только в регистре. Первое сравнение игнорирует регистр, а второе — регистр.
// Sample for String::Compare(String, Int32, String, Int32, Int32, Boolean)
using namespace System;
int main()
{
// 0123456
String^ str1 = "MACHINE";
String^ str2 = "machine";
String^ str;
int result;
Console::WriteLine();
Console::WriteLine( "str1 = '{0}', str2 = '{1}'", str1, str2 );
Console::WriteLine( "Ignore case:" );
result = String::Compare( str1, 2, str2, 2, 2, true );
str = ((result < 0) ? "less than" : ((result > 0) ? (String^)"greater than" : "equal to"));
Console::Write( "Substring '{0}' in '{1}' is ", str1->Substring( 2, 2 ), str1 );
Console::Write( " {0} ", str );
Console::WriteLine( "substring '{0}' in '{1}'.", str2->Substring( 2, 2 ), str2 );
Console::WriteLine();
Console::WriteLine( "Honor case:" );
result = String::Compare( str1, 2, str2, 2, 2, false );
str = ((result < 0) ? "less than" : ((result > 0) ? (String^)"greater than" : "equal to"));
Console::Write( "Substring '{0}' in '{1}' is ", str1->Substring( 2, 2 ), str1 );
Console::Write( " {0} ", str );
Console::WriteLine( "substring '{0}' in '{1}'.", str2->Substring( 2, 2 ), str2 );
}
/*
This example produces the following results:
str1 = 'MACHINE', str2 = 'machine'
Ignore case:
Substring 'CH' in 'MACHINE' is equal to substring 'ch' in 'machine'.
Honor case:
Substring 'CH' in 'MACHINE' is greater than substring 'ch' in 'machine'.
*/
String str1 = "MACHINE";
String str2 = "machine";
String str;
int result;
Console.WriteLine();
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2);
Console.WriteLine("Ignore case:");
result = String.Compare(str1, 2, str2, 2, 2, true);
str = ((result < 0) ? "less than" : ((result > 0) ? "greater than" : "equal to"));
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1);
Console.Write("{0} ", str);
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(2, 2), str2);
Console.WriteLine();
Console.WriteLine("Honor case:");
result = String.Compare(str1, 2, str2, 2, 2, false);
str = ((result < 0) ? "less than" : ((result > 0) ? "greater than" : "equal to"));
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1);
Console.Write("{0} ", str);
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(2, 2), str2);
/*
This example produces the following results:
str1 = 'MACHINE', str2 = 'machine'
Ignore case:
Substring 'CH' in 'MACHINE' is equal to substring 'ch' in 'machine'.
Honor case:
Substring 'CH' in 'MACHINE' is greater than substring 'ch' in 'machine'.
*/
open System
let str1 = "MACHINE"
let str2 = "machine"
printfn $"\nstr1 = '{str1}', str2 = '{str2}'"
printfn "Ignore case:"
let result = String.Compare(str1, 2, str2, 2, 2, true)
let str =
if result < 0 then "less than"
elif result > 0 then "greater than"
else "equal to"
printf $"Substring '{str1.Substring(2, 2)}' in '{str1}' is "
printf $"{str} "
printfn $"substring '{str2.Substring(2, 2)}' in '{str2}'.\n"
printfn "Honor case:"
let result2 = String.Compare(str1, 2, str2, 2, 2, false)
let str3 =
if result < 0 then "less than"
elif result > 0 then "greater than"
else "equal to"
printfn $"Substring '{str1.Substring(2, 2)}' in '{str1}' is "
printf $"{str3} "
printfn $"substring '{str2.Substring(2, 2)}' in '{str2}'."
(*
This example produces the following results:
str1 = 'MACHINE', str2 = 'machine'
Ignore case:
Substring 'CH' in 'MACHINE' is equal to substring 'ch' in 'machine'.
Honor case:
Substring 'CH' in 'MACHINE' is greater than substring 'ch' in 'machine'.
*)
' Sample for String.Compare(String, Int32, String, Int32, Int32, Boolean)
Class Sample
Public Shared Sub Main()
' 0123456
Dim str1 As [String] = "MACHINE"
Dim str2 As [String] = "machine"
Dim str As [String]
Dim result As Integer
Console.WriteLine()
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2)
Console.WriteLine("Ignore case:")
result = [String].Compare(str1, 2, str2, 2, 2, True)
str = IIf(result < 0, "less than", IIf(result > 0, "greater than", "equal to"))
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1)
Console.Write("{0} ", str)
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(2, 2), str2)
Console.WriteLine()
Console.WriteLine("Honor case:")
result = [String].Compare(str1, 2, str2, 2, 2, False)
str = IIf(result < 0, "less than", IIf(result > 0, "greater than", "equal to"))
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1)
Console.Write("{0} ", str)
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(2, 2), str2)
End Sub
End Class
'
'This example produces the following results:
'
'str1 = 'MACHINE', str2 = 'machine'
'Ignore case:
'Substring 'CH' in 'MACHINE' is equal to substring 'ch' in 'machine'.
'
'Honor case:
'Substring 'CH' in 'MACHINE' is greater than substring 'ch' in 'machine'.
'
Комментарии
Сравниваемая подстрока начинается с strA
indexA
, а в — в indexB
strB
. Оба indexA
значения и indexB
отсчитываются от нуля, то есть первый символ в strA
и strB
находится в нулевой позиции. Длина первой подстроки равна длине strA
минус indexA
1. Длина второй подстроки равна длине strB
минус indexB
1.
Количество сравниваемых символов меньше длины двух подстрок, и length
. Параметры indexA
, indexB
и length
должны быть нерицательными.
В сравнении используется текущий язык и региональные параметры для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, язык и региональные параметры могут указывать, что определенные сочетания символов обрабатываются как один символ, а символы в верхнем и нижнем регистре сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Сравнение выполняется с помощью правил сортировки слов. Дополнительные сведения о сортировке слов, строк и порядковых номеров см. в разделе System.Globalization.CompareOptions.
Предупреждение
При сравнении строк следует вызвать Compare(String, Int32, String, Int32, Int32, StringComparison) метод , который требует явно указать тип сравнения строк, который использует метод . Дополнительные сведения см. в разделе Рекомендации по использованию строк.
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше пустой ссылки; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих подстрок. Однако если две строки сравниваются равными концу одной строки, а в другой строке осталось символов, то строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнения влияют правила регистра, относящиеся к языку и региональным параметрам. Например, на турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Имя пути должно сравниваться инвариантным образом. Правильный код для этого выглядит следующим образом.
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, Int32, String, Int32, Int32, Boolean) не учитывает эти символы при выполнении лингвистического сравнения или сравнения с учетом языка и региональных параметров. Чтобы распознать игнорируемые символы в сравнении Compare(String, Int32, String, Int32, Int32, StringComparison) , вызовите метод и укажите значение Ordinal или OrdinalIgnoreCase для comparisonType
параметра .
См. также раздел
Применяется к
Compare(String, Int32, String, Int32, Int32)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает подстроки двух указанных объектов String и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, int indexA, System::String ^ strB, int indexB, int length);
public static int Compare (string strA, int indexA, string strB, int indexB, int length);
public static int Compare (string? strA, int indexA, string? strB, int indexB, int length);
static member Compare : string * int * string * int * int -> int
Public Shared Function Compare (strA As String, indexA As Integer, strB As String, indexB As Integer, length As Integer) As Integer
Параметры
- strA
- String
Первая из сравниваемых строк.
- indexA
- Int32
Позиция подстроки в strA
.
- strB
- String
Вторая из сравниваемых строк.
- indexB
- Int32
Позиция подстроки в strB
.
- length
- Int32
Максимальное число сравниваемых знаков в подстроках.
Возвращаемое значение
32-разрядное целое число со знаком, выражающее лексическое соотношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | Подстрока в strA предшествует подстроке в strB в порядке сортировки.
|
Нуль | Подстроки появляются в той же позиции в порядке сортировки, или параметр length равен нулю.
|
Больше нуля | Подстрока в strA следует за подстрокой в strB в порядке сортировки.
|
Исключения
Значение indexA
больше значения strA
Length.
-или-
Значение indexB
больше значения strB
Length.
-или-
indexA
, indexB
или length
является отрицательным значением.
-или-
indexA
или indexB
равно null
, а length
больше нуля.
Примеры
В следующем примере сравниваются две подстроки.
// Sample for String::Compare(String, Int32, String, Int32, Int32)
using namespace System;
int main()
{
// 0123456
String^ str1 = "machine";
String^ str2 = "device";
String^ str;
int result;
Console::WriteLine();
Console::WriteLine( "str1 = '{0}', str2 = '{1}'", str1, str2 );
result = String::Compare( str1, 2, str2, 0, 2 );
str = ((result < 0) ? "less than" : ((result > 0) ? (String^)"greater than" : "equal to"));
Console::Write( "Substring '{0}' in ' {1}' is ", str1->Substring( 2, 2 ), str1 );
Console::Write( " {0} ", str );
Console::WriteLine( "substring '{0}' in ' {1}'.", str2->Substring( 0, 2 ), str2 );
}
/*
This example produces the following results:
str1 = 'machine', str2 = 'device'
Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
*/
String str1 = "machine";
String str2 = "device";
String str;
int result;
Console.WriteLine();
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2);
result = String.Compare(str1, 2, str2, 0, 2);
str = ((result < 0) ? "less than" : ((result > 0) ? "greater than" : "equal to"));
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1);
Console.Write("{0} ", str);
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(0, 2), str2);
/*
This example produces the following results:
str1 = 'machine', str2 = 'device'
Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
*/
open System
let str1 = "machine"
let str2 = "device"
printfn "\nstr1 = '{str1}', str2 = '{str2}'"
let result = String.Compare(str1, 2, str2, 0, 2)
let str =
if result < 0 then "less than"
elif result > 0 then "greater than"
else "equal to"
printf $"Substring '{str1.Substring(2, 2)}' in '{str1}' is "
printf $"{str} "
printfn $"substring '{str2.Substring(0, 2)}' in '{str2}'."
(*
This example produces the following results:
str1 = 'machine', str2 = 'device'
Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
*)
' Sample for String.Compare(String, Int32, String, Int32, Int32)
Class Sample
Public Shared Sub Main()
' 0123456
Dim str1 As [String] = "machine"
Dim str2 As [String] = "device"
Dim str As [String]
Dim result As Integer
Console.WriteLine()
Console.WriteLine("str1 = '{0}', str2 = '{1}'", str1, str2)
result = [String].Compare(str1, 2, str2, 0, 2)
str = IIf(result < 0, "less than", IIf(result > 0, "greater than", "equal to"))
Console.Write("Substring '{0}' in '{1}' is ", str1.Substring(2, 2), str1)
Console.Write("{0} ", str)
Console.WriteLine("substring '{0}' in '{1}'.", str2.Substring(0, 2), str2)
End Sub
End Class
'
'This example produces the following results:
'
'str1 = 'machine', str2 = 'device'
'Substring 'ch' in 'machine' is less than substring 'de' in 'device'.
'
Комментарии
Подстроки для сравнения начинаются с strA
и indexA
в strB
indexB
. Оба indexA
значения и indexB
отсчитываются от нуля, то есть первый символ в strA
и strB
находится в нулевой позиции. Длина первой подстроки равна длине strA
минус indexA
1. Длина второй подстроки равна длине strB
минус indexB
1.
Количество сравниваемых символов меньше длины двух подстрок, и length
. Параметры indexA
, indexB
и length
должны быть нерицательными.
В сравнении используется текущий язык и региональные параметры для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, язык и региональные параметры могут указывать, что определенные сочетания символов обрабатываются как один символ, а символы в верхнем и нижнем регистре сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Сравнение выполняется с помощью правил сортировки слов. Дополнительные сведения о сортировке слов, строк и порядковых номеров см. в разделе System.Globalization.CompareOptions.
Предупреждение
При сравнении строк следует вызвать Compare(String, Int32, String, Int32, Int32, StringComparison) метод , который требует явно указать тип сравнения строк, который использует метод . Дополнительные сведения см. в разделе Рекомендации по использованию строк.
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше пустой ссылки; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих подстрок. Однако если две строки сравниваются равными концу одной строки, а в другой строке осталось символов, то строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнения влияют правила регистра, относящиеся к языку и региональным параметрам. Например, на турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Сравните путь с именем "file" с помощью порядкового сравнения. Правильный код для этого выглядит следующим образом:
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, Int32, String, Int32, Int32) не учитывает эти символы при выполнении лингвистического сравнения или сравнения с учетом языка и региональных параметров. Чтобы распознать игнорируемые символы в сравнении Compare(String, Int32, String, Int32, Int32, StringComparison) , вызовите метод и укажите значение Ordinal или OrdinalIgnoreCase для comparisonType
параметра .
См. также раздел
Применяется к
Compare(String, String, CultureInfo, CompareOptions)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает два заданных объекта String, используя указанные параметры сравнения и сведения о языке и региональных параметрах, которые влияют на сравнение, и возвращает целое число, показывающее связь между двумя строками в порядке сортировки.
public:
static int Compare(System::String ^ strA, System::String ^ strB, System::Globalization::CultureInfo ^ culture, System::Globalization::CompareOptions options);
public static int Compare (string? strA, string? strB, System.Globalization.CultureInfo? culture, System.Globalization.CompareOptions options);
public static int Compare (string strA, string strB, System.Globalization.CultureInfo culture, System.Globalization.CompareOptions options);
static member Compare : string * string * System.Globalization.CultureInfo * System.Globalization.CompareOptions -> int
Public Shared Function Compare (strA As String, strB As String, culture As CultureInfo, options As CompareOptions) As Integer
Параметры
- strA
- String
Первая сравниваемая строка.
- strB
- String
Вторая сравниваемая строка.
- culture
- CultureInfo
Язык и региональные параметры, которые предоставляют сведения об особенностях сравнения с учетом языка и региональных параметров. Если значением параметра culture
является null
, используется текущий язык и региональные параметры.
- options
- CompareOptions
Параметры, которые используются во время сравнения (например, игнорирование регистра или символов).
Возвращаемое значение
32-разрядное целое число со знаком, которое указывает на лексические отношения между strA
и strB
, как показано в следующей таблице.
Значение | Условие |
---|---|
Меньше нуля | strA предшествует strB в порядке сортировки.
|
Нуль | strA занимает ту же позицию в порядке сортировки, что и объект strB .
|
Больше нуля | strA следует за strB в порядке сортировки.
|
Исключения
options
не является значением CompareOptions.
Примеры
В следующем примере сравниваются две строки тремя различными способами: используйте лингвистическое сравнение для языка и региональных параметров en-US; использование лингвистического сравнения с учетом регистра для языка и региональных параметров en-US; и с использованием порядкового сравнения. В нем показано, как три метода сравнения дают три разных результата.
using namespace System;
using namespace System::Globalization;
public ref class Example
{
public:
static void Main()
{
String^ string1 = "brother";
String^ string2 = "Brother";
String^ relation;
int result;
// Cultural (linguistic) comparison.
result = String::Compare(string1, string2, gcnew CultureInfo("en-US"),
CompareOptions::None);
if (result > 0)
relation = "comes after";
else if (result == 0)
relation = "is the same as";
else
relation = "comes before";
Console::WriteLine("'{0}' {1} '{2}'.",
string1, relation, string2);
// Cultural (linguistic) case-insensitive comparison.
result = String::Compare(string1, string2, gcnew CultureInfo("en-US"),
CompareOptions::IgnoreCase);
if (result > 0)
relation = "comes after";
else if (result == 0)
relation = "is the same as";
else
relation = "comes before";
Console::WriteLine("'{0}' {1} '{2}'.",
string1, relation, string2);
// Culture-insensitive ordinal comparison.
result = String::CompareOrdinal(string1, string2);
if (result > 0)
relation = "comes after";
else if (result == 0)
relation = "is the same as";
else
relation = "comes before";
Console::WriteLine("'{0}' {1} '{2}'.",
string1, relation, string2);
}
};
int main()
{
Example::Main();
}
// The example produces the following output:
// 'brother' comes before 'Brother'.
// 'brother' is the same as 'Brother'.
// 'brother' comes after 'Brother'.
using System;
using System.Globalization;
public class Example0
{
public static void Main()
{
string string1 = "brother";
string string2 = "Brother";
string relation;
int result;
// Cultural (linguistic) comparison.
result = String.Compare(string1, string2, new CultureInfo("en-US"),
CompareOptions.None);
if (result > 0)
relation = "comes after";
else if (result == 0)
relation = "is the same as";
else
relation = "comes before";
Console.WriteLine("'{0}' {1} '{2}'.",
string1, relation, string2);
// Cultural (linguistic) case-insensitive comparison.
result = String.Compare(string1, string2, new CultureInfo("en-US"),
CompareOptions.IgnoreCase);
if (result > 0)
relation = "comes after";
else if (result == 0)
relation = "is the same as";
else
relation = "comes before";
Console.WriteLine("'{0}' {1} '{2}'.",
string1, relation, string2);
// Culture-insensitive ordinal comparison.
result = String.CompareOrdinal(string1, string2);
if (result > 0)
relation = "comes after";
else if (result == 0)
relation = "is the same as";
else
relation = "comes before";
Console.WriteLine("'{0}' {1} '{2}'.",
string1, relation, string2);
// The example produces the following output:
// 'brother' comes before 'Brother'.
// 'brother' is the same as 'Brother'.
// 'brother' comes after 'Brother'.
}
}
open System
open System.Globalization
let string1 = "brother"
let string2 = "Brother"
// Cultural (linguistic) comparison.
let result = String.Compare(string1, string2, CultureInfo "en-US", CompareOptions.None)
let relation =
if result > 0 then "comes after"
elif result = 0 then "is the same as"
else "comes before"
printfn $"'{string1}' {relation} '{string2}'."
// Cultural (linguistic) case-insensitive comparison.
let result2 = String.Compare(string1, string2, CultureInfo "en-US", CompareOptions.IgnoreCase)
let relation2 =
if result2 > 0 then "comes after"
elif result2 = 0 then "is the same as"
else "comes before"
printfn $"'{string1}' {relation2} '{string2}'."
// Culture-insensitive ordinal comparison.
let result3 = String.CompareOrdinal(string1, string2)
let relation3 =
if result2 > 0 then "comes after"
elif result2 = 0 then "is the same as"
else "comes before"
printfn $"'{string1}' {relation} '{string2}'."
// The example produces the following output:
// 'brother' comes before 'Brother'.
// 'brother' is the same as 'Brother'.
// 'brother' comes after 'Brother'.
Imports System.Globalization
Public Module Example
Public Sub Main()
Dim string1 As String = "brother"
Dim string2 As String = "Brother"
Dim relation As String
Dim result As Integer
' Cultural (linguistic) comparison.
result = String.Compare(string1, string2, _
New CultureInfo("en-US"), CompareOptions.None)
If result > 0 Then
relation = "comes after"
ElseIf result = 0 Then
relation = "is the same as"
Else
relation = "comes before"
End If
Console.WriteLine("'{0}' {1} '{2}'.", string1, relation, string2)
' Cultural (linguistic) case-insensitive comparison.
result = String.Compare(string1, string2, _
New CultureInfo("en-US"), CompareOptions.IgnoreCase)
If result > 0 Then
relation = "comes after"
ElseIf result = 0 Then
relation = "is the same as"
Else
relation = "comes before"
End If
Console.WriteLine("'{0}' {1} '{2}'.", string1, relation, string2)
' Culture-insensitive ordinal comparison.
result = String.CompareOrdinal(string1, string2)
If result > 0 Then
relation = "comes after"
ElseIf result = 0 Then
relation = "is the same as"
Else
relation = "comes before"
End If
Console.WriteLine("'{0}' {1} '{2}'.", string1, relation, string2)
End Sub
End Module
' The example produces the following output:
' 'brother' comes before 'Brother'.
' 'brother' is the same as 'Brother'.
' 'brother' comes after 'Brother'.
Комментарии
Для сравнения используется culture
параметр для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, определенный язык и региональные параметры могут указывать, что определенные сочетания символов обрабатываются как один символ, что символы в верхнем и нижнем регистре сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Внимание!
Метод Compare(String, String, CultureInfo, CompareOptions) предназначен в основном для использования в операциях сортировки или алфавитизации. Его не следует использовать, если основная цель вызова метода заключается в определении эквивалентности двух строк (то есть, если цель вызова метода заключается в проверке возвращаемого значения, равного нулю). Чтобы определить, эквивалентны ли две строки, вызовите Equals метод .
Сравнение может быть дополнительно задано параметром options
, который состоит из одного или нескольких элементов перечисления CompareOptions . Однако, поскольку этот метод предназначен для сравнения строк с учетом языка и региональных параметров, значения и CompareOptions.OrdinalIgnoreCase не оказывают никакого CompareOptions.Ordinal влияния.
Сравнение может иметь null
значение . По определению любая строка, включая String.Empty, сравнивает больше пустой ссылки, а две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих строк. Однако если две строки сравниваются равными концу одной строки, а в другой строке осталось символов, строка с оставшимися символами считается большей.
Примечания для тех, кто вызывает этот метод
Наборы символов содержат игнорируемые символы, то есть символы, которые не учитываются при выполнении лингвистического сравнения или сравнения с учетом языка и региональных параметров. Метод Compare(String, String, CultureInfo, CompareOptions) не учитывает такие символы при сравнении с учетом языка и региональных параметров. Чтобы распознать игнорируемые символы в сравнении Ordinal , укажите значение или OrdinalIgnoreCase для options
параметра .
См. также раздел
Применяется к
Compare(String, String, Boolean, CultureInfo)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает два указанных объекта String (с учетом или без учета регистра), используя сведения о языке и региональных параметрах, и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, System::String ^ strB, bool ignoreCase, System::Globalization::CultureInfo ^ culture);
public static int Compare (string? strA, string? strB, bool ignoreCase, System.Globalization.CultureInfo? culture);
public static int Compare (string strA, string strB, bool ignoreCase, System.Globalization.CultureInfo culture);
static member Compare : string * string * bool * System.Globalization.CultureInfo -> int
Public Shared Function Compare (strA As String, strB As String, ignoreCase As Boolean, culture As CultureInfo) As Integer
Параметры
- strA
- String
Первая сравниваемая строка.
- strB
- String
Вторая сравниваемая строка.
- ignoreCase
- Boolean
Значение true
, чтобы не учитывать регистр при сравнении; в противном случае — значение false
.
- culture
- CultureInfo
Объект, предоставляющий сведения об особенностях сравнения, определяемых языком и региональными параметрами. Если значением параметра culture
является null
, используется текущий язык и региональные параметры.
Возвращаемое значение
32-битовое целое число со знаком, выражающее лексическое отношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | strA предшествует strB в порядке сортировки.
|
Нуль | strA занимает ту же позицию в порядке сортировки, что и объект strB .
|
Больше нуля | strA следует за strB в порядке сортировки.
|
Примеры
В следующем примере показано, как язык и региональные параметры могут повлиять на сравнение. В чешско-чешской культуре "ch" является одним символом, превышающим "d". Однако в английском языке (США языке и региональных параметрах", "ch" состоит из двух символов, а "c" меньше "d".
using namespace System;
using namespace System::Globalization;
String^ symbol( int r )
{
String^ s = "=";
if ( r < 0 )
s = "<";
else
if ( r > 0 )
s = ">";
return s;
}
int main()
{
String^ str1 = "change";
String^ str2 = "dollar";
String^ relation = nullptr;
relation = symbol( String::Compare( str1, str2, false, gcnew CultureInfo( "en-US" ) ) );
Console::WriteLine( "For en-US: {0} {1} {2}", str1, relation, str2 );
relation = symbol( String::Compare( str1, str2, false, gcnew CultureInfo( "cs-CZ" ) ) );
Console::WriteLine( "For cs-CZ: {0} {1} {2}", str1, relation, str2 );
}
/*
This example produces the following results.
For en-US: change < dollar
For cs-CZ: change > dollar
*/
public static void Main()
{
String str1 = "change";
String str2 = "dollar";
String relation;
relation = symbol(String.Compare(str1, str2, false, new CultureInfo("en-US")));
Console.WriteLine("For en-US: {0} {1} {2}", str1, relation, str2);
relation = symbol(String.Compare(str1, str2, false, new CultureInfo("cs-CZ")));
Console.WriteLine("For cs-CZ: {0} {1} {2}", str1, relation, str2);
}
private static String symbol(int r)
{
String s = "=";
if (r < 0) s = "<";
else if (r > 0) s = ">";
return s;
}
/*
This example produces the following results.
For en-US: change < dollar
For cs-CZ: change > dollar
*/
let symbol r =
if r < 0 then "<"
elif r > 0 then ">"
else "="
let str1 = "change"
let str2 = "dollar"
let relation1 =
String.Compare(str1, str2, false, CultureInfo "en-US")
|> symbol
printfn $"For en-US: {str1} {relation1} {str2}"
let relation2 =
String.Compare(str1, str2, false, CultureInfo "cs-CZ")
|> symbol
printfn $"For cs-CZ: {str1} {relation2} {str2}"
(*
This example produces the following results.
For en-US: change < dollar
For cs-CZ: change > dollar
*)
Imports System.Globalization
_
Class Sample
Public Shared Sub Main()
Dim str1 As [String] = "change"
Dim str2 As [String] = "dollar"
Dim relation As [String] = Nothing
relation = symbol([String].Compare(str1, str2, False, New CultureInfo("en-US")))
Console.WriteLine("For en-US: {0} {1} {2}", str1, relation, str2)
relation = symbol([String].Compare(str1, str2, False, New CultureInfo("cs-CZ")))
Console.WriteLine("For cs-CZ: {0} {1} {2}", str1, relation, str2)
End Sub
Private Shared Function symbol(r As Integer) As [String]
Dim s As [String] = "="
If r < 0 Then
s = "<"
Else
If r > 0 Then
s = ">"
End If
End If
Return s
End Function 'symbol
End Class
'
'This example produces the following results.
'For en-US: change < dollar
'For cs-CZ: change > dollar
'
Комментарии
В сравнении culture
используется параметр для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, язык и региональные параметры могут указывать на то, что определенные сочетания символов обрабатываются как один символ, а прописные и строчные регистры сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Сравнение выполняется с помощью правил сортировки слов. Дополнительные сведения о сортировке слов, строк и порядковых номеров см. в разделе System.Globalization.CompareOptions.
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше, чем пустая ссылка; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих строк. Однако если две строки сравниваются с концом одной строки, а другая строка содержит символы, то строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнение влияют правила регистра, относящиеся к языку и региональным параметрам. Например, в турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Сравните имя пути с "файлом" с помощью порядкового сравнения. Правильный код для этого выглядит следующим образом:
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, String, Boolean, CultureInfo) не учитывает такие символы при сравнении с учетом языка и региональных параметров. Например, если следующий код выполняется на платформа .NET Framework 4 или более поздней версии, сравнение "animal" без учета регистра с "Ani-mal" (с использованием мягкого дефиса или U+00AD) с использованием инвариантного языка и региональных параметров указывает, что две строки эквивалентны.
string s1 = "Ani\u00ADmal";
string s2 = "animal";
Console.WriteLine("Comparison of '{0}' and '{1}': {2}",
s1, s2, String.Compare(s1, s2, true,
CultureInfo.InvariantCulture));
// The example displays the following output:
// Comparison of 'Ani-mal' and 'animal': 0
open System
open System.Globalization
let s1 = "Ani\u00ADmal"
let s2 = "animal"
printfn $"Comparison of '{s1}' and '{s2}': {String.Compare(s1, s2, true, CultureInfo.InvariantCulture)}"
// The example displays the following output:
// Comparison of 'Ani-mal' and 'animal': 0
Imports System.Globalization
Module Example
Public Sub Main()
Dim s1 As String = "Ani" + ChrW(&h00AD) + "mal"
Dim s2 As String = "animal"
Console.WriteLine("Comparison of '{0}' and '{1}': {2}",
s1, s2, String.Compare(s1, s2, True,
CultureInfo.InvariantCulture))
End Sub
End Module
' The example displays the following output:
' Comparison of 'ani-mal' and 'animal': 0
Чтобы распознать игнорируемые символы в сравнении Compare(String, String, CultureInfo, CompareOptions) строк, вызовите метод и укажите значение Ordinal или OrdinalIgnoreCase для options
параметра .
См. также раздел
- Int32
- CompareOrdinal(String, String)
- CompareTo(Object)
- IsPrefix(String, String, CompareOptions)
- Boolean
Применяется к
Compare(String, String, StringComparison)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает два указанных объекта String с использованием заданных правил и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, System::String ^ strB, StringComparison comparisonType);
public static int Compare (string strA, string strB, StringComparison comparisonType);
public static int Compare (string? strA, string? strB, StringComparison comparisonType);
static member Compare : string * string * StringComparison -> int
Public Shared Function Compare (strA As String, strB As String, comparisonType As StringComparison) As Integer
Параметры
- strA
- String
Первая сравниваемая строка.
- strB
- String
Вторая сравниваемая строка.
- comparisonType
- StringComparison
Одно из значений перечисления, определяющее используемые при сравнении правила.
Возвращаемое значение
32-битовое целое число со знаком, выражающее лексическое отношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | strA предшествует strB в порядке сортировки.
|
Нуль | strA занимает ту же позицию в порядке сортировки, что и объект strB .
|
Больше нуля | strA следует за strB в порядке сортировки.
|
Исключения
comparisonType
не является значением StringComparison.
Тип StringComparison не поддерживается.
Примеры
В следующем примере сравниваются три версии буквы "I". На результаты влияет выбор языка и региональных параметров, игнорируется ли регистр и выполняется порядковый номер сравнения.
// This example demonstrates the
// System.String.Compare(String, String, StringComparison) method.
using namespace System;
using namespace System::Threading;
void Test(int testStringIndex, int searchStringIndex,
StringComparison comparison, array<String^>^ testI,
array<String^>^ testNames)
{
String^ resultFormat = "{0} is {1} {2}";
String^ resultString = "equal to";
int comparisonValue = 0;
comparisonValue = String::Compare(testI[testStringIndex],
testI[searchStringIndex], comparison);
if (comparisonValue < 0)
{
resultString = "less than";
}
else if (comparisonValue > 0)
{
resultString = "greater than";
}
Console::WriteLine(resultFormat, testNames[testStringIndex], resultString,
testNames[searchStringIndex]);
}
int main()
{
String^ introMessage =
"Compare three versions of the letter I using different " +
"values of StringComparison.";
// Define an array of strings where each element contains a version of
// the letter I. (An array of strings is used so you can easily modify
// this code example to test additional or different combinations of
// strings.)
array<String^>^ letterVariation = gcnew array<String^>(3);
// LATIN SMALL LETTER I (U+0069)
letterVariation[0] = "i";
// LATIN SMALL LETTER DOTLESS I (U+0131)
letterVariation[1] = L"\u0131";
// LATIN CAPITAL LETTER I (U+0049)
letterVariation[2] = "I";
array<String^>^ unicodeNames = {
"LATIN SMALL LETTER I (U+0069)",
"LATIN SMALL LETTER DOTLESS I (U+0131)",
"LATIN CAPITAL LETTER I (U+0049)"};
array<StringComparison>^ comparisonValues = {
StringComparison::CurrentCulture,
StringComparison::CurrentCultureIgnoreCase,
StringComparison::InvariantCulture,
StringComparison::InvariantCultureIgnoreCase,
StringComparison::Ordinal,
StringComparison::OrdinalIgnoreCase};
Console::Clear();
Console::WriteLine(introMessage);
// Display the current culture because the culture-specific comparisons
// can produce different results with different cultures.
Console::WriteLine("The current culture is {0}.{1}",
Thread::CurrentThread->CurrentCulture->Name, Environment::NewLine);
// Determine the relative sort order of three versions of the letter I.
for each (StringComparison stringCmp in comparisonValues)
{
Console::WriteLine("StringComparison.{0}:", stringCmp);
// LATIN SMALL LETTER I (U+0069) : LATIN SMALL LETTER DOTLESS I
// (U+0131)
Test(0, 1, stringCmp, letterVariation, unicodeNames);
// LATIN SMALL LETTER I (U+0069) : LATIN CAPITAL LETTER I (U+0049)
Test(0, 2, stringCmp, letterVariation, unicodeNames);
// LATIN SMALL LETTER DOTLESS I (U+0131) : LATIN CAPITAL LETTER I
// (U+0049)
Test(1, 2, stringCmp, letterVariation, unicodeNames);
Console::WriteLine();
}
}
/*
This code example produces the following results:
Compare three versions of the letter I using different values of
StringComparison.
The current culture is en-US.
StringComparison.CurrentCulture:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER
DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN
CAPITAL LETTER I (U+0049)
StringComparison.CurrentCultureIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER
DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN
CAPITAL LETTER I (U+0049)
StringComparison.InvariantCulture:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER
DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN
CAPITAL LETTER I (U+0049)
StringComparison.InvariantCultureIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER
DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN
CAPITAL LETTER I (U+0049)
StringComparison.Ordinal:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER
DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is greater than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN
CAPITAL LETTER I (U+0049)
StringComparison.OrdinalIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER
DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN
CAPITAL LETTER I (U+0049)
*/
// This example demonstrates the
// System.String.Compare(String, String, StringComparison) method.
using System;
using System.Threading;
class Sample
{
public static void Main()
{
string intro = "Compare three versions of the letter I using different " +
"values of StringComparison.";
// Define an array of strings where each element contains a version of the
// letter I. (An array of strings is used so you can easily modify this
// code example to test additional or different combinations of strings.)
string[] threeIs = new string[3];
// LATIN SMALL LETTER I (U+0069)
threeIs[0] = "\u0069";
// LATIN SMALL LETTER DOTLESS I (U+0131)
threeIs[1] = "\u0131";
// LATIN CAPITAL LETTER I (U+0049)
threeIs[2] = "\u0049";
string[] unicodeNames =
{
"LATIN SMALL LETTER I (U+0069)",
"LATIN SMALL LETTER DOTLESS I (U+0131)",
"LATIN CAPITAL LETTER I (U+0049)"
};
StringComparison[] scValues =
{
StringComparison.CurrentCulture,
StringComparison.CurrentCultureIgnoreCase,
StringComparison.InvariantCulture,
StringComparison.InvariantCultureIgnoreCase,
StringComparison.Ordinal,
StringComparison.OrdinalIgnoreCase
};
Console.Clear();
Console.WriteLine(intro);
// Display the current culture because the culture-specific comparisons
// can produce different results with different cultures.
Console.WriteLine(
"The current culture is {0}.\n", Thread.CurrentThread.CurrentCulture.Name);
// Determine the relative sort order of three versions of the letter I.
foreach (StringComparison sc in scValues)
{
Console.WriteLine("StringComparison.{0}:", sc);
// LATIN SMALL LETTER I (U+0069) : LATIN SMALL LETTER DOTLESS I (U+0131)
Test(0, 1, sc, threeIs, unicodeNames);
// LATIN SMALL LETTER I (U+0069) : LATIN CAPITAL LETTER I (U+0049)
Test(0, 2, sc, threeIs, unicodeNames);
// LATIN SMALL LETTER DOTLESS I (U+0131) : LATIN CAPITAL LETTER I (U+0049)
Test(1, 2, sc, threeIs, unicodeNames);
Console.WriteLine();
}
}
protected static void Test(
int x, int y, StringComparison comparison, string[] testI, string[] testNames)
{
string resultFmt = "{0} is {1} {2}";
string result = "equal to";
int cmpValue = 0;
cmpValue = String.Compare(testI[x], testI[y], comparison);
if (cmpValue < 0)
result = "less than";
else if (cmpValue > 0)
result = "greater than";
Console.WriteLine(resultFmt, testNames[x], result, testNames[y]);
}
}
/*
This code example produces the following results:
Compare three versions of the letter I using different values of StringComparison.
The current culture is en-US.
StringComparison.CurrentCulture:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.CurrentCultureIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.InvariantCulture:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.InvariantCultureIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.Ordinal:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is greater than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.OrdinalIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
*/
// This example demonstrates the
// System.String.Compare(String, String, StringComparison) method.
open System
open System.Threading
let test x y (comparison: StringComparison) (testI: string[]) (testNames: string[]) =
let cmpValue = String.Compare(testI[x], testI[y], comparison)
let result =
if cmpValue < 0 then
"less than"
elif cmpValue > 0 then
"greater than"
else
"equal to"
printfn $"{testNames[x]} is {result} {testNames[y]}"
let intro = "Compare three versions of the letter I using different values of StringComparison."
// Define an array of strings where each element contains a version of the
// letter I. (An array of strings is used so you can easily modify this
// code example to test additional or different combinations of strings.)
let threeIs =
[|// LATIN SMALL LETTER I (U+0069)
"\u0069"
// LATIN SMALL LETTER DOTLESS I (U+0131)
"\u0131"
// LATIN CAPITAL LETTER I (U+0049)
"\u0049" |]
let unicodeNames =
[| "LATIN SMALL LETTER I (U+0069)"
"LATIN SMALL LETTER DOTLESS I (U+0131)"
"LATIN CAPITAL LETTER I (U+0049)" |]
let scValues =
[| StringComparison.CurrentCulture
StringComparison.CurrentCultureIgnoreCase
StringComparison.InvariantCulture
StringComparison.InvariantCultureIgnoreCase
StringComparison.Ordinal
StringComparison.OrdinalIgnoreCase |]
Console.Clear()
printfn $"{intro}"
// Display the current culture because the culture-specific comparisons
// can produce different results with different cultures.
printfn $"The current culture is {Thread.CurrentThread.CurrentCulture.Name}.\n"
// Determine the relative sort order of three versions of the letter I.
for sc in scValues do
printfn $"StringComparison.{sc}:"
// LATIN SMALL LETTER I (U+0069) : LATIN SMALL LETTER DOTLESS I (U+0131)
test 0 1 sc threeIs unicodeNames
// LATIN SMALL LETTER I (U+0069) : LATIN CAPITAL LETTER I (U+0049)
test 0 2 sc threeIs unicodeNames
// LATIN SMALL LETTER DOTLESS I (U+0131) : LATIN CAPITAL LETTER I (U+0049)
test 1 2 sc threeIs unicodeNames
printfn ""
(*
This code example produces the following results:
Compare three versions of the letter I using different values of StringComparison.
The current culture is en-US.
StringComparison.CurrentCulture:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.CurrentCultureIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.InvariantCulture:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.InvariantCultureIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.Ordinal:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is greater than LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
StringComparison.OrdinalIgnoreCase:
LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
*)
' This example demonstrates the
' System.String.Compare(String, String, StringComparison) method.
Imports System.Threading
Class Sample
Public Shared Sub Main()
Dim intro As String = "Compare three versions of the letter I using different " & _
"values of StringComparison."
' Define an array of strings where each element contains a version of the
' letter I. (An array of strings is used so you can easily modify this
' code example to test additional or different combinations of strings.)
Dim threeIs(2) As String
' LATIN SMALL LETTER I (U+0069)
threeIs(0) = "i"
' LATIN SMALL LETTER DOTLESS I (U+0131)
threeIs(1) = "ı"
' LATIN CAPITAL LETTER I (U+0049)
threeIs(2) = "I"
Dim unicodeNames As String() = { _
"LATIN SMALL LETTER I (U+0069)", _
"LATIN SMALL LETTER DOTLESS I (U+0131)", _
"LATIN CAPITAL LETTER I (U+0049)" }
Dim scValues As StringComparison() = { _
StringComparison.CurrentCulture, _
StringComparison.CurrentCultureIgnoreCase, _
StringComparison.InvariantCulture, _
StringComparison.InvariantCultureIgnoreCase, _
StringComparison.Ordinal, _
StringComparison.OrdinalIgnoreCase }
'
Console.Clear()
Console.WriteLine(intro)
' Display the current culture because the culture-specific comparisons
' can produce different results with different cultures.
Console.WriteLine("The current culture is {0}." & vbCrLf, _
Thread.CurrentThread.CurrentCulture.Name)
' Determine the relative sort order of three versions of the letter I.
Dim sc As StringComparison
For Each sc In scValues
Console.WriteLine("StringComparison.{0}:", sc)
' LATIN SMALL LETTER I (U+0069) : LATIN SMALL LETTER DOTLESS I (U+0131)
Test(0, 1, sc, threeIs, unicodeNames)
' LATIN SMALL LETTER I (U+0069) : LATIN CAPITAL LETTER I (U+0049)
Test(0, 2, sc, threeIs, unicodeNames)
' LATIN SMALL LETTER DOTLESS I (U+0131) : LATIN CAPITAL LETTER I (U+0049)
Test(1, 2, sc, threeIs, unicodeNames)
Console.WriteLine()
Next sc
End Sub
Protected Shared Sub Test(ByVal x As Integer, ByVal y As Integer, _
ByVal comparison As StringComparison, _
ByVal testI() As String, ByVal testNames() As String)
Dim resultFmt As String = "{0} is {1} {2}"
Dim result As String = "equal to"
Dim cmpValue As Integer = 0
'
cmpValue = String.Compare(testI(x), testI(y), comparison)
If cmpValue < 0 Then
result = "less than"
ElseIf cmpValue > 0 Then
result = "greater than"
End If
Console.WriteLine(resultFmt, testNames(x), result, testNames(y))
End Sub
End Class
'
'This code example produces the following results:
'
'Compare three versions of the letter I using different values of StringComparison.
'The current culture is en-US.
'
'StringComparison.CurrentCulture:
'LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
'LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
'LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
'
'StringComparison.CurrentCultureIgnoreCase:
'LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
'LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
'LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
'
'StringComparison.InvariantCulture:
'LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
'LATIN SMALL LETTER I (U+0069) is less than LATIN CAPITAL LETTER I (U+0049)
'LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
'
'StringComparison.InvariantCultureIgnoreCase:
'LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
'LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
'LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
'
'StringComparison.Ordinal:
'LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
'LATIN SMALL LETTER I (U+0069) is greater than LATIN CAPITAL LETTER I (U+0049)
'LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
'
'StringComparison.OrdinalIgnoreCase:
'LATIN SMALL LETTER I (U+0069) is less than LATIN SMALL LETTER DOTLESS I (U+0131)
'LATIN SMALL LETTER I (U+0069) is equal to LATIN CAPITAL LETTER I (U+0049)
'LATIN SMALL LETTER DOTLESS I (U+0131) is greater than LATIN CAPITAL LETTER I (U+0049)
'
Комментарии
Параметр comparisonType
указывает, следует ли при сравнении использовать текущий или инвариантный язык и региональные параметры, учитывать или игнорировать регистр сравнения, а также использовать слова (с учетом языка и региональных параметров) или порядковые правила сортировки (без учета языка и региональных параметров).
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше, чем пустая ссылка; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих строк. Однако если две строки сравниваются с концом одной строки, а в другой строке остаются символы, строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнение влияют правила регистра, относящиеся к языку и региональным параметрам. Например, в турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Сравните имя пути с "файлом" с помощью порядкового сравнения. Правильный код для этого выглядит следующим образом:
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, String, StringComparison) не учитывает такие символы при сравнении с учетом языка и региональных параметров. Чтобы распознать игнорируемые символы в сравнении Ordinal , укажите значение или OrdinalIgnoreCase для comparisonType
параметра .
См. также раздел
Применяется к
Compare(String, String, Boolean)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает два указанных объекта String (с учетом или без учета регистра) и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, System::String ^ strB, bool ignoreCase);
public static int Compare (string strA, string strB, bool ignoreCase);
public static int Compare (string? strA, string? strB, bool ignoreCase);
static member Compare : string * string * bool -> int
Public Shared Function Compare (strA As String, strB As String, ignoreCase As Boolean) As Integer
Параметры
- strA
- String
Первая сравниваемая строка.
- strB
- String
Вторая сравниваемая строка.
- ignoreCase
- Boolean
Значение true
, чтобы не учитывать регистр при сравнении; в противном случае — значение false
.
Возвращаемое значение
32-битовое целое число со знаком, выражающее лексическое отношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | strA предшествует strB в порядке сортировки.
|
Нуль | strA занимает ту же позицию в порядке сортировки, что и объект strB .
|
Больше нуля | strA следует за strB в порядке сортировки.
|
Примеры
В следующем примере показано, что Compare(String, String, Boolean) метод эквивалентен использованию ToUpper или ToLower при сравнении строк.
using namespace System;
void main()
{
// Create upper-case characters from their Unicode code units.
String^ stringUpper = "\x0041\x0042\x0043";
// Create lower-case characters from their Unicode code units.
String^ stringLower = "\x0061\x0062\x0063";
// Display the strings.
Console::WriteLine("Comparing '{0}' and '{1}':",
stringUpper, stringLower);
// Compare the uppercased strings; the result is true.
Console::WriteLine("The Strings are equal when capitalized? {0}",
String::Compare(stringUpper->ToUpper(), stringLower->ToUpper()) == 0
? "true" : "false");
// The previous method call is equivalent to this Compare method, which ignores case.
Console::WriteLine("The Strings are equal when case is ignored? {0}",
String::Compare(stringUpper, stringLower, true) == 0
? "true" : "false");
}
// The example displays the following output:
// Comparing 'ABC' and 'abc':
// The Strings are equal when capitalized? true
// The Strings are equal when case is ignored? true
// Create upper-case characters from their Unicode code units.
String stringUpper = "\x0041\x0042\x0043";
// Create lower-case characters from their Unicode code units.
String stringLower = "\x0061\x0062\x0063";
// Display the strings.
Console.WriteLine("Comparing '{0}' and '{1}':",
stringUpper, stringLower);
// Compare the uppercased strings; the result is true.
Console.WriteLine("The Strings are equal when capitalized? {0}",
String.Compare(stringUpper.ToUpper(), stringLower.ToUpper()) == 0
? "true" : "false");
// The previous method call is equivalent to this Compare method, which ignores case.
Console.WriteLine("The Strings are equal when case is ignored? {0}",
String.Compare(stringUpper, stringLower, true) == 0
? "true" : "false" );
// The example displays the following output:
// Comparing 'ABC' and 'abc':
// The Strings are equal when capitalized? true
// The Strings are equal when case is ignored? true
open System
// Create upper-case characters from their Unicode code units.
let stringUpper = "\x0041\x0042\x0043"
// Create lower-case characters from their Unicode code units.
let stringLower = "\x0061\x0062\x0063"
// Display the strings.
printfn $"Comparing '{stringUpper}' and '{stringLower}':"
// Compare the uppercased strings the result is true.
printfn $"The Strings are equal when capitalized? %b{String.Compare(stringUpper.ToUpper(), stringLower.ToUpper()) = 0}"
// The previous method call is equivalent to this Compare method, which ignores case.
printfn $"The Strings are equal when case is ignored? %b{String.Compare(stringUpper, stringLower, true) = 0}"
// The example displays the following output:
// Comparing 'ABC' and 'abc':
// The Strings are equal when capitalized? true
// The Strings are equal when case is ignored? true
Public Module Example
Public Sub Main()
' Create upper-case characters from their Unicode code units.
Dim stringUpper As String = ChrW(&H41) + ChrW(&H42) + ChrW(&H43)
' Create lower-case characters from their Unicode code units.
Dim stringLower As String = ChrW(&H61) + ChrW(&H62) + ChrW(&H63)
' Display the strings.
Console.WriteLine("Comparing '{0}' and '{1}':",
stringUpper, stringLower)
' Compare the uppercased strings; the result is true.
Console.WriteLine("The Strings are equal when capitalized? {0}",
If(String.Compare(stringUpper.ToUpper(), stringLower.ToUpper()) = 0,
"true", "false"))
' The previous method call is equivalent to this Compare method, which ignores case.
Console.WriteLine("The Strings are equal when case is ignored? {0}",
If(String.Compare(stringUpper, stringLower, true) = 0,
"true", "false"))
End Sub
End Module
' The example displays the following output:
' Comparing 'ABC' and 'abc':
' The Strings are equal when capitalized? true
' The Strings are equal when case is ignored? true
Комментарии
В сравнении используется текущий язык и региональные параметры для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, язык и региональные параметры могут указывать на то, что определенные сочетания символов обрабатываются как один символ, а прописные и строчные регистры сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Сравнение выполняется с помощью правил сортировки слов. Дополнительные сведения о сортировке слов, строк и порядковых номеров см. в разделе System.Globalization.CompareOptions.
Предупреждение
При сравнении строк следует вызвать Compare(String, String, StringComparison) метод , который требует явно указать тип сравнения строк, который использует метод . Дополнительные сведения см. в разделе Рекомендации по использованию строк.
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше, чем пустая ссылка; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих строк. Однако если две строки сравниваются с концом одной строки, а другая строка содержит символы, то строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнение влияют правила регистра, относящиеся к языку и региональным параметрам. Например, в турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Сравните имя пути с "файлом" с помощью порядкового сравнения. Правильный код для этого выглядит следующим образом:
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, String, Boolean) не учитывает такие символы при сравнении с учетом языка и региональных параметров. Например, если следующий код выполняется на платформа .NET Framework 4 или более поздней версии, сравнение "животное" с Ani-mal с учетом языка и региональных параметров без учета регистра означает, что две строки эквивалентны.
string s1 = "Ani\u00ADmal";
string s2 = "animal";
Console.WriteLine("Comparison of '{0}' and '{1}': {2}",
s1, s2, String.Compare(s1, s2, true));
// The example displays the following output:
// Comparison of 'Ani-mal' and 'animal': 0
open System
let s1 = "Ani\u00ADmal"
let s2 = "animal"
printfn $"Comparison of '{s1}' and '{s2}': {String.Compare(s1, s2, true)}"
// The example displays the following output:
// Comparison of 'Ani-mal' and 'animal': 0
Module Example
Public Sub Main()
Dim s1 As String = "Ani" + ChrW(&h00AD) + "mal"
Dim s2 As String = "animal"
Console.WriteLine("Comparison of '{0}' and '{1}': {2}",
s1, s2, String.Compare(s1, s2, True))
End Sub
End Module
' The example displays the following output:
' Comparison of 'ani-mal' and 'animal': 0
Чтобы распознать игнорируемые символы в сравнении строк, вызовите Compare(String, String, StringComparison) метод и укажите значение Ordinal или OrdinalIgnoreCase для comparisonType
параметра .
См. также раздел
Применяется к
Compare(String, String)
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
- Исходный код:
- String.Comparison.cs
Сравнивает два указанных объекта String и возвращает целое число, которое показывает их относительное положение в порядке сортировки.
public:
static int Compare(System::String ^ strA, System::String ^ strB);
public static int Compare (string strA, string strB);
public static int Compare (string? strA, string? strB);
static member Compare : string * string -> int
Public Shared Function Compare (strA As String, strB As String) As Integer
Параметры
- strA
- String
Первая сравниваемая строка.
- strB
- String
Вторая сравниваемая строка.
Возвращаемое значение
32-битовое целое число со знаком, выражающее лексическое отношение двух сравниваемых значений.
Значение | Условие |
---|---|
Меньше нуля | strA предшествует strB в порядке сортировки.
|
Нуль | strA занимает ту же позицию в порядке сортировки, что и объект strB .
|
Больше нуля | strA следует за strB в порядке сортировки.
|
Примеры
В следующем примере вызывается Compare(String, String) метод для сравнения трех наборов строк.
using namespace System;
void main()
{
// Create upper-case characters from their Unicode code units.
String^ stringUpper = "\x0041\x0042\x0043";
// Create lower-case characters from their Unicode code units.
String^ stringLower = "\x0061\x0062\x0063";
// Display the strings.
Console::WriteLine("Comparing '{0}' and '{1}':",
stringUpper, stringLower);
// Compare the uppercased strings; the result is true.
Console::WriteLine("The Strings are equal when capitalized? {0}",
String::Compare(stringUpper->ToUpper(), stringLower->ToUpper()) == 0
? "true" : "false");
// The previous method call is equivalent to this Compare method, which ignores case.
Console::WriteLine("The Strings are equal when case is ignored? {0}",
String::Compare(stringUpper, stringLower, true) == 0
? "true" : "false");
}
// The example displays the following output:
// Comparing 'ABC' and 'abc':
// The Strings are equal when capitalized? true
// The Strings are equal when case is ignored? true
// Create upper-case characters from their Unicode code units.
String stringUpper = "\x0041\x0042\x0043";
// Create lower-case characters from their Unicode code units.
String stringLower = "\x0061\x0062\x0063";
// Display the strings.
Console.WriteLine("Comparing '{0}' and '{1}':",
stringUpper, stringLower);
// Compare the uppercased strings; the result is true.
Console.WriteLine("The Strings are equal when capitalized? {0}",
String.Compare(stringUpper.ToUpper(), stringLower.ToUpper()) == 0
? "true" : "false");
// The previous method call is equivalent to this Compare method, which ignores case.
Console.WriteLine("The Strings are equal when case is ignored? {0}",
String.Compare(stringUpper, stringLower, true) == 0
? "true" : "false" );
// The example displays the following output:
// Comparing 'ABC' and 'abc':
// The Strings are equal when capitalized? true
// The Strings are equal when case is ignored? true
open System
// Create upper-case characters from their Unicode code units.
let stringUpper = "\x0041\x0042\x0043"
// Create lower-case characters from their Unicode code units.
let stringLower = "\x0061\x0062\x0063"
// Display the strings.
printfn $"Comparing '{stringUpper}' and '{stringLower}':"
// Compare the uppercased strings the result is true.
printfn $"The Strings are equal when capitalized? %b{String.Compare(stringUpper.ToUpper(), stringLower.ToUpper()) = 0}"
// The previous method call is equivalent to this Compare method, which ignores case.
printfn $"The Strings are equal when case is ignored? %b{String.Compare(stringUpper, stringLower, true) = 0}"
// The example displays the following output:
// Comparing 'ABC' and 'abc':
// The Strings are equal when capitalized? true
// The Strings are equal when case is ignored? true
Public Module Example
Public Sub Main()
' Create upper-case characters from their Unicode code units.
Dim stringUpper As String = ChrW(&H41) + ChrW(&H42) + ChrW(&H43)
' Create lower-case characters from their Unicode code units.
Dim stringLower As String = ChrW(&H61) + ChrW(&H62) + ChrW(&H63)
' Display the strings.
Console.WriteLine("Comparing '{0}' and '{1}':",
stringUpper, stringLower)
' Compare the uppercased strings; the result is true.
Console.WriteLine("The Strings are equal when capitalized? {0}",
If(String.Compare(stringUpper.ToUpper(), stringLower.ToUpper()) = 0,
"true", "false"))
' The previous method call is equivalent to this Compare method, which ignores case.
Console.WriteLine("The Strings are equal when case is ignored? {0}",
If(String.Compare(stringUpper, stringLower, true) = 0,
"true", "false"))
End Sub
End Module
' The example displays the following output:
' Comparing 'ABC' and 'abc':
' The Strings are equal when capitalized? true
' The Strings are equal when case is ignored? true
В следующем примере класс демонстрирует, ReverseStringComparer
как можно вычислить две строки с помощью Compare метода .
using namespace System;
using namespace System::Text;
using namespace System::Collections;
ref class ReverseStringComparer: public IComparer
{
public:
virtual int Compare( Object^ x, Object^ y )
{
String^ s1 = dynamic_cast<String^>(x);
String^ s2 = dynamic_cast<String^>(y);
//negate the return value to get the reverse order
return -String::Compare( s1, s2 );
}
};
void PrintValues( String^ title, IEnumerable^ myList )
{
Console::Write( "{0,10}: ", title );
StringBuilder^ sb = gcnew StringBuilder;
{
IEnumerator^ en = myList->GetEnumerator();
String^ s;
while ( en->MoveNext() )
{
s = en->Current->ToString();
sb->AppendFormat( "{0}, ", s );
}
}
sb->Remove( sb->Length - 2, 2 );
Console::WriteLine( sb );
}
void main()
{
// Creates and initializes a new ArrayList.
ArrayList^ myAL = gcnew ArrayList;
myAL->Add( "Eric" );
myAL->Add( "Mark" );
myAL->Add( "Lance" );
myAL->Add( "Rob" );
myAL->Add( "Kris" );
myAL->Add( "Brad" );
myAL->Add( "Kit" );
myAL->Add( "Bradley" );
myAL->Add( "Keith" );
myAL->Add( "Susan" );
// Displays the properties and values of the ArrayList.
Console::WriteLine( "Count: {0}", myAL->Count.ToString() );
PrintValues( "Unsorted", myAL );
myAL->Sort();
PrintValues( "Sorted", myAL );
myAL->Sort( gcnew ReverseStringComparer );
PrintValues( "Reverse", myAL );
array<String^>^names = dynamic_cast<array<String^>^>(myAL->ToArray( String::typeid ));
}
using System;
using System.Text;
using System.Collections;
public class SamplesArrayList
{
public static void Main()
{
// Creates and initializes a new ArrayList.
ArrayList myAL = new ArrayList();
myAL.Add("Eric");
myAL.Add("Mark");
myAL.Add("Lance");
myAL.Add("Rob");
myAL.Add("Kris");
myAL.Add("Brad");
myAL.Add("Kit");
myAL.Add("Bradley");
myAL.Add("Keith");
myAL.Add("Susan");
// Displays the properties and values of the ArrayList.
Console.WriteLine("Count: {0}", myAL.Count);
PrintValues("Unsorted", myAL);
myAL.Sort();
PrintValues("Sorted", myAL);
myAL.Sort(new ReverseStringComparer());
PrintValues("Reverse", myAL);
string[] names = (string[])myAL.ToArray(typeof(string));
}
public static void PrintValues(string title, IEnumerable myList)
{
Console.Write("{0,10}: ", title);
StringBuilder sb = new StringBuilder();
foreach (string s in myList)
{
sb.AppendFormat("{0}, ", s);
}
sb.Remove(sb.Length - 2, 2);
Console.WriteLine(sb);
}
}
public class ReverseStringComparer : IComparer
{
public int Compare(object? x, object? y)
{
string? s1 = x as string;
string? s2 = y as string;
//negate the return value to get the reverse order
return -String.Compare(s1, s2);
}
}
open System
open System.Text
open System.Collections.Generic
type ReverseStringComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
-String.Compare(x, y)
let printValues title (myList: #seq<string>) =
printf $"{title,10}: "
let sb = StringBuilder()
for s in myList do
sb.Append $"{s}, " |> ignore
sb.Remove(sb.Length - 2, 2) |> ignore
printfn $"{sb}"
// Creates and initializes a new ResizeArray.
let myAL = ResizeArray()
myAL.Add "Eric"
myAL.Add "Mark"
myAL.Add "Lance"
myAL.Add "Rob"
myAL.Add "Kris"
myAL.Add "Brad"
myAL.Add "Kit"
myAL.Add "Bradley"
myAL.Add "Keith"
myAL.Add "Susan"
// Displays the properties and values of the ArrayList.
printfn $"Count: {myAL.Count}"
printValues "Unsorted" myAL
myAL.Sort()
printValues "Sorted" myAL
myAL.Sort(ReverseStringComparer())
printValues "Reverse" myAL
Imports System.Text
Imports System.Collections
Public Class SamplesArrayList
Public Shared Sub Main()
Dim myAL As New ArrayList()
' Creates and initializes a new ArrayList.
myAL.Add("Eric")
myAL.Add("Mark")
myAL.Add("Lance")
myAL.Add("Rob")
myAL.Add("Kris")
myAL.Add("Brad")
myAL.Add("Kit")
myAL.Add("Bradley")
myAL.Add("Keith")
myAL.Add("Susan")
' Displays the properties and values of the ArrayList.
Console.WriteLine("Count: {0}", myAL.Count)
PrintValues("Unsorted", myAL)
myAL.Sort()
PrintValues("Sorted", myAL)
Dim comp as New ReverseStringComparer
myAL.Sort(comp)
PrintValues("Reverse", myAL)
Dim names As String() = CType(myAL.ToArray(GetType(String)), String())
End Sub
Public Shared Sub PrintValues(title As String, myList As IEnumerable)
Console.Write("{0,10}: ", title)
Dim sb As New StringBuilder()
Dim s As String
For Each s In myList
sb.AppendFormat("{0}, ", s)
Next s
sb.Remove(sb.Length - 2, 2)
Console.WriteLine(sb)
End Sub
End Class
Public Class ReverseStringComparer
Implements IComparer
Function Compare(x As Object, y As Object) As Integer implements IComparer.Compare
Dim s1 As String = CStr (x)
Dim s2 As String = CStr (y)
'negate the return value to get the reverse order
Return - [String].Compare(s1, s2)
End Function 'Compare
End Class
Комментарии
В сравнении используется текущий язык и региональные параметры для получения сведений о языке и региональных параметрах, таких как правила регистра и алфавитный порядок отдельных символов. Например, язык и региональные параметры могут указывать на то, что определенные сочетания символов обрабатываются как один символ, а прописные и строчные регистры сравниваются определенным образом или что порядок сортировки символа зависит от символов, которые предшествуют или следуют за ним.
Сравнение выполняется с помощью правил сортировки слов. Дополнительные сведения о сортировке слов, строк и порядковых номеров см. в разделе System.Globalization.CompareOptions.
Предупреждение
При сравнении строк следует вызвать Compare(String, String, StringComparison) метод , который требует явно указать тип сравнения строк, который использует метод . Дополнительные сведения см. в разделе Рекомендации по использованию строк.
Один или оба параметра сравнения могут иметь значение null
. По определению любая строка, включая пустую строку (""), сравнивает больше, чем пустая ссылка; и две пустые ссылки сравниваются равными друг другу.
Сравнение завершается при обнаружении неравенства или сравнении обеих строк. Однако если две строки сравниваются с концом одной строки, а другая строка содержит символы, то строка с оставшимися символами считается большей. Возвращаемое значение является результатом последнего выполненного сравнения.
Непредвиденные результаты могут возникать, если на сравнение влияют правила регистра, относящиеся к языку и региональным параметрам. Например, в турецком языке следующий пример дает неправильные результаты, так как файловая система на турецком языке не использует правила лингвистического регистра для буквы "i" в "file".
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, true) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, true) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, true) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, True) = 0 Then
Return True
Else
Return False
End If
End Function
Сравните имя пути с "файлом" с помощью порядкового сравнения. Правильный код для этого выглядит следующим образом:
static bool IsFileURI(String^ path)
{
return (String::Compare(path, 0, "file:", 0, 5, StringComparison::OrdinalIgnoreCase) == 0);
}
static bool IsFileURI(String path)
{
return (String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) == 0);
}
let isFileURI path =
String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0
Shared Function IsFileURI(ByVal path As String) As Boolean
If String.Compare(path, 0, "file:", 0, 5, StringComparison.OrdinalIgnoreCase) = 0 Then
Return True
Else
Return False
End If
End Function
Примечания для тех, кто вызывает этот метод
Наборы символов содержат символы, которые могут игнорироваться. Метод Compare(String, String) не учитывает такие символы при сравнении с учетом языка и региональных параметров. Например, если следующий код выполняется на платформа .NET Framework 4 или более поздней версии, сравнение "животное" с "ani-mal" (с использованием мягкого дефиса или U+00AD) указывает, что две строки эквивалентны.
string s1 = "ani\u00ADmal";
string s2 = "animal";
Console.WriteLine("Comparison of '{0}' and '{1}': {2}",
s1, s2, String.Compare(s1, s2));
// The example displays the following output:
// Comparison of 'ani-mal' and 'animal': 0
open System
let s1 = "ani\u00ADmal"
let s2 = "animal"
printfn $"Comparison of '{s1}' and '{s2}': {String.Compare(s1, s2)}"
// The example displays the following output:
// Comparison of 'ani-mal' and 'animal': 0
Module Example
Public Sub Main()
Dim s1 As String = "ani" + ChrW(&h00AD) + "mal"
Dim s2 As String = "animal"
Console.WriteLine("Comparison of '{0}' and '{1}': {2}",
s1, s2, String.Compare(s1, s2))
End Sub
End Module
' The example displays the following output:
' Comparison of 'ani-mal' and 'animal': 0
Чтобы распознать игнорируемые символы в сравнении строк, вызовите Compare(String, String, StringComparison) метод и укажите значение Ordinal или OrdinalIgnoreCase для comparisonType
параметра .
См. также раздел
Применяется к
Обратная связь
https://aka.ms/ContentUserFeedback.
Ожидается в ближайшее время: в течение 2024 года мы постепенно откажемся от GitHub Issues как механизма обратной связи для контента и заменим его новой системой обратной связи. Дополнительные сведения см. в разделеОтправить и просмотреть отзыв по