AccessibleObject.Select(AccessibleSelection) Метод
Определение
Важно!
Некоторые сведения относятся к предварительной версии продукта, в которую до выпуска могут быть внесены существенные изменения. Майкрософт не предоставляет никаких гарантий, явных или подразумеваемых, относительно приведенных здесь сведений.
Изменяет выделение или перемещает фокус ввода объекта со специальными возможностями.
public:
virtual void Select(System::Windows::Forms::AccessibleSelection flags);
public virtual void Select (System.Windows.Forms.AccessibleSelection flags);
abstract member Select : System.Windows.Forms.AccessibleSelection -> unit
override this.Select : System.Windows.Forms.AccessibleSelection -> unit
Public Overridable Sub Select (flags As AccessibleSelection)
Параметры
- flags
- AccessibleSelection
Одно из значений перечисления AccessibleSelection.
Исключения
Не удалось выполнить выделение.
Примеры
В следующем примере показано создание элемента управления диаграммы с поддержкой специальных возможностей с помощью AccessibleObject классов и Control.ControlAccessibleObject предоставления доступной информации. Элемент управления отображает две кривые вместе с условным обозначениями. Класс ChartControlAccessibleObject
, производный от ControlAccessibleObject
этого, используется в CreateAccessibilityInstance методе для предоставления настраиваемых доступных сведений для элемента управления диаграммой. Так как условные обозначения диаграммы не являются фактическим Control элементом управления на основе, а рисуются элементом управления диаграммы, он не имеет встроенной доступной информации. Из-за этого ChartControlAccessibleObject
класс переопределяет GetChild метод, возвращающий CurveLegendAccessibleObject
доступную информацию для каждой части условных обозначений. Если приложение, поддерживающее доступ, использует этот элемент управления, элемент управления может предоставить необходимую информацию.
Этот код демонстрирует переопределение Select метода. Полный пример кода см. в обзоре AccessibleObject класса.
// Inner class CurveLegendAccessibleObject represents accessible information
// associated with the CurveLegend object.
public:
ref class CurveLegendAccessibleObject: public AccessibleObject
{
private:
CurveLegend^ curveLegend;
public:
CurveLegendAccessibleObject( CurveLegend^ curveLegend )
: AccessibleObject()
{
this->curveLegend = curveLegend;
}
private:
property ChartControlAccessibleObject^ ChartControl
{
// Private property that helps get the reference to the parent ChartControl.
ChartControlAccessibleObject^ get()
{
return dynamic_cast<ChartControlAccessibleObject^>(Parent);
}
}
internal:
property int ID
{
// Internal helper function that returns the ID for this CurveLegend.
int get()
{
for ( int i = 0; i < ChartControl->GetChildCount(); i++ )
{
if ( ChartControl->GetChild( i ) == this )
{
return i;
}
}
return -1;
}
}
public:
property Rectangle Bounds
{
// Gets the Bounds for the CurveLegend. This is used by accessibility programs.
virtual Rectangle get() override
{
// The bounds is in screen coordinates.
Point loc = curveLegend->Location;
return Rectangle(curveLegend->chart->PointToScreen( loc ),curveLegend->Size);
}
}
property String^ Name
{
// Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
virtual String^ get() override
{
return curveLegend->Name;
}
virtual void set( String^ value ) override
{
curveLegend->Name = value;
}
}
property AccessibleObject^ Parent
{
// Gets the Curve Legend Parent's Accessible object.
// This is used by accessibility programs.
virtual AccessibleObject^ get() override
{
return curveLegend->chart->AccessibilityObject;
}
}
property System::Windows::Forms::AccessibleRole Role
{
// Gets the role for the CurveLegend. This is used by accessibility programs.
virtual System::Windows::Forms::AccessibleRole get() override
{
return ::AccessibleRole::StaticText;
}
}
property AccessibleStates State
{
// Gets the state based on the selection for the CurveLegend.
// This is used by accessibility programs.
virtual AccessibleStates get() override
{
AccessibleStates state = AccessibleStates::Selectable;
if ( curveLegend->Selected )
{
state = static_cast<AccessibleStates>(state | AccessibleStates::Selected);
}
return state;
}
}
// Navigates through siblings of this CurveLegend. This is used by accessibility programs.
virtual AccessibleObject^ Navigate( AccessibleNavigation navdir ) override
{
// Uses the internal NavigateFromChild helper function that exists
// on ChartControlAccessibleObject.
return ChartControl->NavigateFromChild( this, navdir );
}
// Selects or unselects this CurveLegend. This is used by accessibility programs.
virtual void Select( AccessibleSelection selection ) override
{
// Uses the internal SelectChild helper function that exists
// on ChartControlAccessibleObject.
ChartControl->SelectChild( this, selection );
}
};
// Inner class CurveLegendAccessibleObject represents accessible information
// associated with the CurveLegend object.
public class CurveLegendAccessibleObject : AccessibleObject
{
private CurveLegend curveLegend;
public CurveLegendAccessibleObject(CurveLegend curveLegend) : base()
{
this.curveLegend = curveLegend;
}
// Private property that helps get the reference to the parent ChartControl.
private ChartControlAccessibleObject ChartControl
{
get {
return Parent as ChartControlAccessibleObject;
}
}
// Internal helper function that returns the ID for this CurveLegend.
internal int ID
{
get {
for(int i = 0; i < ChartControl.GetChildCount(); i++) {
if (ChartControl.GetChild(i) == this) {
return i;
}
}
return -1;
}
}
// Gets the Bounds for the CurveLegend. This is used by accessibility programs.
public override Rectangle Bounds
{
get {
// The bounds is in screen coordinates.
Point loc = curveLegend.Location;
return new Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size);
}
}
// Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
public override string Name
{
get {
return curveLegend.Name;
}
set {
curveLegend.Name = value;
}
}
// Gets the Curve Legend Parent's Accessible object.
// This is used by accessibility programs.
public override AccessibleObject Parent
{
get {
return curveLegend.chart.AccessibilityObject;
}
}
// Gets the role for the CurveLegend. This is used by accessibility programs.
public override AccessibleRole Role
{
get {
return AccessibleRole.StaticText;
}
}
// Gets the state based on the selection for the CurveLegend.
// This is used by accessibility programs.
public override AccessibleStates State
{
get {
AccessibleStates state = AccessibleStates.Selectable;
if (curveLegend.Selected)
{
state |= AccessibleStates.Selected;
}
return state;
}
}
// Navigates through siblings of this CurveLegend. This is used by accessibility programs.
public override AccessibleObject Navigate(AccessibleNavigation navdir)
{
// Uses the internal NavigateFromChild helper function that exists
// on ChartControlAccessibleObject.
return ChartControl.NavigateFromChild(this, navdir);
}
// Selects or unselects this CurveLegend. This is used by accessibility programs.
public override void Select(AccessibleSelection selection)
{
// Uses the internal SelectChild helper function that exists
// on ChartControlAccessibleObject.
ChartControl.SelectChild(this, selection);
}
}
' Inner class CurveLegendAccessibleObject represents accessible information
' associated with the CurveLegend object.
Public Class CurveLegendAccessibleObject
Inherits AccessibleObject
Private curveLegend As CurveLegend
Public Sub New(curveLegend As CurveLegend)
Me.curveLegend = curveLegend
End Sub
' Private property that helps get the reference to the parent ChartControl.
Private ReadOnly Property ChartControl() As ChartControlAccessibleObject
Get
Return CType(Parent, ChartControlAccessibleObject)
End Get
End Property
' Friend helper function that returns the ID for this CurveLegend.
Friend ReadOnly Property ID() As Integer
Get
Dim i As Integer
For i = 0 To (ChartControl.GetChildCount()) - 1
If ChartControl.GetChild(i) Is Me Then
Return i
End If
Next i
Return - 1
End Get
End Property
' Gets the Bounds for the CurveLegend. This is used by accessibility programs.
Public Overrides ReadOnly Property Bounds() As Rectangle
Get
' The bounds is in screen coordinates.
Dim loc As Point = curveLegend.Location
Return New Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size)
End Get
End Property
' Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
Public Overrides Property Name() As String
Get
Return curveLegend.Name
End Get
Set
curveLegend.Name = value
End Set
End Property
' Gets the Curve Legend Parent's Accessible object.
' This is used by accessibility programs.
Public Overrides ReadOnly Property Parent() As AccessibleObject
Get
Return curveLegend.chart.AccessibilityObject
End Get
End Property
' Gets the role for the CurveLegend. This is used by accessibility programs.
Public Overrides ReadOnly Property Role() As AccessibleRole
Get
Return System.Windows.Forms.AccessibleRole.StaticText
End Get
End Property
' Gets the state based on the selection for the CurveLegend.
' This is used by accessibility programs.
Public Overrides ReadOnly Property State() As AccessibleStates
Get
Dim stateTemp As AccessibleStates = AccessibleStates.Selectable
If curveLegend.Selected Then
stateTemp = stateTemp Or AccessibleStates.Selected
End If
Return stateTemp
End Get
End Property
' Navigates through siblings of this CurveLegend. This is used by accessibility programs.
Public Overrides Function Navigate(navdir As AccessibleNavigation) As AccessibleObject
' Use the Friend NavigateFromChild helper function that exists
' on ChartControlAccessibleObject.
Return ChartControl.NavigateFromChild(Me, navdir)
End Function
' Selects or unselects this CurveLegend. This is used by accessibility programs.
Public Overrides Sub [Select](selection As AccessibleSelection)
' Use the internal SelectChild helper function that exists
' on ChartControlAccessibleObject.
ChartControl.SelectChild(Me, selection)
End Sub
End Class
Комментарии
Приложения могут использовать этот метод для выполнения сложных операций выбора.
Ниже описаны AccessibleSelection значения, которые следует указать при вызове Select для выполнения сложных операций выбора.
Операция | Сочетание флагов |
---|---|
Имитация щелчка | AccessibleSelection.TakeFocusOR AccessibleSelection.TakeSelection Примечание. Это сочетание не будет выбирать нужный элемент управления при вызове из собственного приложения. Однако при вызове из внешнего приложения он будет иметь желаемый эффект. |
Чтобы выбрать целевой элемент, имитировав ctrl+click | AccessibleSelection.TakeFocus OR AccessibleSelection.AddSelection |
Чтобы отменить выбор целевого элемента, имитировав ctrl+click | AccessibleSelection.TakeFocus OR AccessibleSelection.RemoveSelection |
Чтобы имитировать SHIFT+щелчок | AccessibleSelection.TakeFocus OR AccessibleSelection.ExtendSelection |
Выбор диапазона объектов и размещение фокуса на последнем объекте | Укажите AccessibleSelection.TakeFocus начальный объект, чтобы задать привязку выделения. Затем снова вызовите Select и укажите AccessibleSelection.TakeFocus OR AccessibleSelection.ExtendSelection последний объект. |
Отмена выбора всех объектов | Укажите AccessibleSelection.TakeSelection любой объект. Этот флаг отменяет выбор всех выбранных объектов, кроме одного только что выбранного. Затем снова вызовите Select и укажите AccessibleSelection.RemoveSelection в том же объекте. |
Примечания для тех, кто наследует этот метод
Все объекты, которые можно выбрать или получить фокус клавиатуры, должны поддерживать этот метод.