Adding WPP Software Tracing to a Windows Driver

To use WPP software tracing in a trace provider, such as a kernel-mode driver or a user-mode application, you need to add code (or instrument) the driver source files and modify the driver project. This section will describe those steps.

Tip The easiest way to add WPP tracing to your driver is to use one of the KMDF or UMDF driver templates in Visual Studio. If you use the templates, much of the code you need to add is already done for you. In Visual Studio, select File > New > Project, and then select the Windows Driver (user-mode or kernel mode) WDF project. The WPP macros are defined in the Trace.h header file that is included as part of the project. If you use one of the templates, you can skip ahead to Step 5.

Step 1: Define the control GUID and trace flags

Every trace provider (such as a driver, or user-mode app) must be uniquely defined. You do this by adding the WPP_CONTROL_GUIDS macro that defines a control GUID, an identifier, and trace flags. This is done so that you can identify and control when and what you want to trace. While each driver typically has a separate control GUID, a driver could have multiple control GUIDs, or multiple drivers could share one control GUID.

For convenience, the WPP_CONTROL_GUIDS macro is typically defined in a common header file. The header file must be included (#include) in any source file that you intend to instrument for tracing.

To add WPP_CONTROL_GUIDS macro to your driver:

  1. Add a new C++ header file to your Visual Studio project that you can use for defining the WPP trace macros. For example, select and hold (or right-click) the driver in Solution Explorer, and select Add > New Item. Save the file (as Trace.h, for example).

  2. Add a WPP_CONTROL_GUIDS macro to specify friendly name for the trace provider, define a control GUID, and to define the trace flags that you can use to qualify specific trace messages.

    The WPP_CONTROL_GUIDS macro has the following syntax:

    Syntax for WPP_CONTROL_GUIDS

    #define WPP_CONTROL_GUIDS \
        WPP_DEFINE_CONTROL_GUID(GUIDFriendlyName, (ControlGUID),  \
            WPP_DEFINE_BIT(NameOfTraceFlag1)  \
            WPP_DEFINE_BIT(NameOfTraceFlag2)  \
            .............................   \
            .............................   \
            WPP_DEFINE_BIT(NameOfTraceFlag31) \
            )
    

    For example, the following code uses myDriverTraceGuid as the GUIDFriendlyName. Note that ControlGUID has a slightly different format than the standard form of a 32-digit hexadecimal GUID. The ControlGUID has the five fields, but they are separated by commas and bracketed by parentheses, instead of the usual hyphens and curly braces. For example, you specify ((84bdb2e9,829e,41b3,b891,02f454bc2bd7) instead of {84bdb2e9-829e-41b3-b891-02f454bc2bd7}.

    Example of a WPP_CONTROL_GUIDS statement

    #define WPP_CONTROL_GUIDS                                              \
        WPP_DEFINE_CONTROL_GUID(                                           \
            myDriverTraceGuid, (84bdb2e9,829e,41b3,b891,02f454bc2bd7), \
            WPP_DEFINE_BIT(MYDRIVER_ALL_INFO)        /* bit  0 = 0x00000001 */ \
            WPP_DEFINE_BIT(TRACE_DRIVER)             /* bit  1 = 0x00000002 */ \
            WPP_DEFINE_BIT(TRACE_DEVICE)             /* bit  2 = 0x00000004 */ \
            WPP_DEFINE_BIT(TRACE_QUEUE)              /* bit  3 = 0x00000008 */ \
            )                             
    

    Tip You can copy this code snippet into a header file. Be sure to change the control GUID and the friendly name. You can use GUIDgen.exe to generate the control GUID. The Guidgen.exe is included with Visual Studio (Tools > Create GUID). You could also use the Uuidgen.exe tool, which is available from the Visual Studio Command prompt window (type uuidgen.exe /? for more information).

  3. Define the Trace Flags for your trace provider.

    The WPP_DEFINE_BIT elements of the WPP_CONTROL_GUIDS macro define the trace flags for the trace provider. Typically, the flags represent increasingly detailed reporting levels, but you can use flags as any way you like as conditions for generating trace messages. In the WPP_CONTROL_GUIDS example, the WPP_DEFINE_BIT defines four trace flags (MYDRIVER_ALL_INFO, TRACE_DRIVER, TRACE_DEVICE, and TRACE_QUEUE).

    You can define up to 31 trace flags. WPP assigns bit values to the elements in the order they appear, for example, bit 0 (0x1), bit 1 (0x2), bit 2 (0x4), bit 3 (0x8) and so on. You use the trace flags when you add trace message functions to your source code (described in Step 5: Instrument the driver code to generate trace messages at appropriate points).

    Note Using the trace flags you can control when to trace specific components (for example, specific I/O requests, or activities of device or driver objects). You add the trace flag to your trace message statement (for example, DoTraceMessage (TRACE_DRIVER, "Hello World!\n"). When you create a trace session with a trace controller, like Tracelog, you specify the -flag option to use for the trace provider in that session, in this case, the flag is bit 1 (0x1), which corresponds to the TRACE_DRIVER flag. When you start the trace session, all the trace messages that specify that trace flag are written to the log.

Step 2: Choose which trace message functions you intend to use and define the WPP macros for those functions

Like a debug print function, a trace message function is a function (or macro) you add to your code to write trace messages.

Choosing a trace message function

  1. The default trace message function is the DoTraceMessage macro. If you use the default function you can control when to generate messages using the Trace Flag values for your provider. The Trace Flags values are the flags you defined when you created the control GUID in Step 1. If you use DoTraceMessage, the default WPP macros are already defined for you (WPP_LEVEL_ENABLED and WPP_LEVEL_LOGGER), so you can skip the rest of this step and go to Step 5.

  2. If you are using one of the KMDF or UMDF templates, the TraceEvents function and the necessary WPP macros are already defined to enable that function, so you can skip ahead to Step 5.

  3. If you are creating your own trace message function, or converting existing debug print function, continue with the rest of this step.

Creating or customizing a trace message function

  1. If you are using custom trace message functions, or want to convert debug print functions (for example, KdPrint) to generate trace messages, you need to define WPP macros that identify and enable the trace message functions in your trace provider. Put these macros in the Trace.h header file that you added to your project.

  2. Define the WPP macros to enable the trace function.

    Each trace message function that you use must have a corresponding pair of macros. These macros identify the trace provider and specify the conditions that generate the messages. You typically define a pair of macros, WPP_<condition>_LOGGER and WPP_<condition>_ENABLED in terms of the default WPP_LEVEL_ENABLED and WPP_LEVEL_LOGGER macros.

Each trace message function that you use must have a corresponding pair of macros. These macros identify the trace provider and specify the conditions that generate the messages. You typically define a pair of macros, WPP_<condition>_LOGGER and WPP_<condition>_ENABLED in terms of the default WPP_LEVEL_ENABLED and WPP_LEVEL_LOGGER macros.

Term Description

WPP_CONDITIONS_LOGGER

Used to find the trace session associated with the provider and returns a handle to the session.

WPP_CONDITIONS_ENABLED

Used to determine whether logging is enabled with the specified condition.

For the WPP macros you define, the CONDITIONS represent the conditions the trace message function supports, in the order they appear in the function's parameter list, separated by underscores. For example, the default trace message function, DoTraceMessage, only supports Trace Flag as the condition, so there is only one parameter in the macro names (WPP_LEVEL_ENABLED).

Note Unfortunately, the names of the default macros (WPP_LEVEL_ENABLED and WPP_LEVEL_LOGGER) seems to indicate the Trace Level parameter, but they actually refer to the Trace Flag.

If you use a custom trace message function, you can set additional qualifiers, such as the Trace Level. The Trace Level are defined in Evntrace.h file, and the trace levels provide a convenient way of classifying the trace messages as error, warning, and informational messages.

For example, you can add the following code snippet to the header file that you added to your project. The following code defines the custom WPP macros for a trace message function that supports both Trace Level and a Trace Flag parameters as conditions to generate trace messages. The WPP_LEVEL_FLAGS_ENABLED macro returns TRUE if logging is enabled for the specified FLAGS value and the enabled LEVEL value is greater than or equal to the level argument used in the trace message function call.

#define WPP_LEVEL_FLAGS_LOGGER(lvl,flags) \
           WPP_LEVEL_LOGGER(flags)

#define WPP_LEVEL_FLAGS_ENABLED(lvl, flags) \
           (WPP_LEVEL_ENABLED(flags) && WPP_CONTROL(WPP_BIT_ ## flags).Level >= lvl)

Next, you need to specify the custom trace functions in the WPP configuration block (begin_wpp config and end_wpp) For example, if you use the template for UMDF or KMDF Driver projects in Visual Studio, the template defines the WPP macros for a custom trace message function called TraceEvents. The TraceEvents macro function uses Trace Level and Trace Flag as conditions for generating messages. If you have defined the WPP_LEVEL_FLAGS_ENABLED macro in your Trace.h header file, you can add the following macro definition.

//
// This comment block is scanned by the trace preprocessor to define the 
// TraceEvents function.
//
// begin_wpp config
// FUNC TraceEvents(LEVEL, FLAGS, MSG, ...);
// end_wpp
//

You can also convert existing debug print statements to trace messages statements by added a similar FUNC declaration in WPP configuration block. For example, the following example adds the code to convert the existing KdPrint statements. The FUNC declaration also globally defines the KdPrint to use the specified trace level and flag {LEVEL=TRACE_LEVEL_INFORMATION, FLAGS=TRACE_DRIVER}. Instead of sending the output to the debugger, the debug print statements are sent to the trace log.

//
// This comment block is scanned by the trace preprocessor to define the
// TraceEvents function and conversion for KdPrint. Note the double parentheses for the KdPrint message, for compatibility with the KdPrint function.
//
// begin_wpp config
// FUNC TraceEvents(LEVEL, FLAGS, MSG, ...);
// FUNC KdPrint{LEVEL=TRACE_LEVEL_INFORMATION, FLAGS=TRACE_DRIVER}((MSG, ...));
// end_wpp
//

Note If you want to convert KdPrintEx to a trace message function, you need to take a few extra steps. Compared to KdPrint, the KdPrintEx function takes two additional arguments. To convert the KdPrintEx function, you need to define a WPP_DEFINE_BIT for the ComponentID, and define custom WPP_<condition>_LOGGER and WPP_<condition>_ENABLED macros. The second parameter for KdPrintEx specifies the level of is similar to the Trace Level values, so you don't necessarily need to redefine them.


#define WPP_CONTROL_GUIDS                                              \
    WPP_DEFINE_CONTROL_GUID(\
    myDriverTraceGuid, (11C3AAE4, 0D88, 41b3, 43BD, AC38BF747E19), \    /* change GUID for your provider */
        WPP_DEFINE_BIT(MYDRIVER_ALL_INFO)        /* bit  0 = 0x00000001 */ \
        WPP_DEFINE_BIT(TRACE_DRIVER)             /* bit  1 = 0x00000002 */ \
        WPP_DEFINE_BIT(TRACE_DEVICE)             /* bit  2 = 0x00000004 */ \
        WPP_DEFINE_BIT(TRACE_QUEUE)              /* bit  3 = 0x00000008 */ \
        WPP_DEFINE_BIT(DPFLTR_IHVDRIVER_ID)      /* bit  4 = 0x00000010 */\         /* Added for the ComponentID param of KdPrintEx */
    )

#define WPP_Flags_LEVEL_LOGGER(Flags, level)                                  \
    WPP_LEVEL_LOGGER(Flags)

#define WPP_Flags_LEVEL_ENABLED(Flags, level)                                 \
    (WPP_LEVEL_ENABLED(Flags) && \
    WPP_CONTROL(WPP_BIT_ ## Flags).Level >= level)



//
// This comment block is scanned by the trace preprocessor to convert the KdPrintEx function.
// Note the double parentheses for the KdPrint message, for compatiblility with the KdPrintEx function.
//
// begin_wpp config
// FUNC KdPrintEx((Flags, LEVEL, MSG, ...));   
// end_wpp
//

Step 3: Include the associated trace header files (.h and .tmh) in your C or C++ source files

If you defined the control GUID and trace flags for your driver in a header file (for example, trace.h), you need to include the header file in the source files where you will initialize and unload WPP (Step 4) or call trace message functions.

In addition, you need to add an #include statement for Trace Message Header File (.tmh). When you build the driver or application, the WPP preprocessor generates the trace message header files (.tmh) for each source file that contains trace message functions.

/* -- driver.c  - include the *.tmh file that is generated by WPP --*/

#include "trace.h"     /* file that defines WPP_CONFIG_GUIDS and trace flags */
#include "driver.tmh"  /* this file is auto-generated */

Step 4: Add macros to the appropriate callback functions to initialize and clean up WPP

To initialize WPP on driver entry

  • Add the WPP_INIT_TRACING macro to the DriverEntry routine of a kernel-mode driver or UMDF 2.0 driver, or to the DLLMain routine of a user-mode driver (UMDF 1.x) or application.

To clean up WPP resources on driver exit

  • Add the WPP_CLEANUP macro to the driver unload routine (for example, DriverContextCleanup or DriverUnload) of a kernel-mode driver or UMDF 2.0 driver.

    For a user-mode driver (UMDF 1.x) or application, add the WPP_CLEANUP macro to the DLLMain routine.

    You should also add the WPP_CLEANUP macro to the DriverEntry routine in case the DriverEntry fails. For example, if the DriverEntry fails, the driver unload routine will not be called. See the call to WdfDriverCreate in the following example.

Example of a kernel-mode driver using WPP_INIT_TRACING and WPP_CLEANUP in DriverEntry


NTSTATUS
DriverEntry(
    _In_ PDRIVER_OBJECT  DriverObject,
    _In_ PUNICODE_STRING RegistryPath
    )
{  

          //  ... 

                //
    // Initialize WPP Tracing in DriverEntry
    //
    WPP_INIT_TRACING( DriverObject, RegistryPath );

                //  ...


 //
    // Create a framework driver object to represent our driver.
    //
    status = WdfDriverCreate(
        DriverObject,
        RegistryPath,
        &attributes, // Driver Object Attributes
        &config,          // Driver Config Info
        WDF_NO_HANDLE // hDriver
        );

    if (!NT_SUCCESS(status)) {

        TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT,
                "WdfDriverCreate failed with status 0x%x\n", status);
        //
        // Cleanup tracing here because DriverContextCleanup will not be called
        // as we have failed to create WDFDRIVER object itself.
        // Please note that if you return failure from DriverEntry after the
        // WDFDRIVER object is created successfully, you don't have to
        // call WPP cleanup because in those cases DriverContextCleanup
        // will be executed when the framework deletes the DriverObject.
        //
        WPP_CLEANUP(DriverObject);

    }

                return status;

}

Example of a kernel-mode driver using WPP_CLEANUP in DriverContextCleanup



VOID
DriverContextCleanup(
       PDRIVER_OBJECT DriverObject
       )
{
    // ...

    // Clean up WPP resources on unload
    //
    WPP_CLEANUP(DriverObject);

   // ...

}

Example for UMDF 2.0 driver using WPP_INIT_TRACING in DriverEntry


/
// Driver specific #defines in trace header file (trace.h)
//
#define MYDRIVER_TRACING_ID      L"Microsoft\\UMDF2.0\\UMDF2_0Driver1 V1.0"

 // Initialize WPP Tracing in the DriverEntry routine
 //
    WPP_INIT_TRACING( MYDRIVER_TRACING_ID );

Example for UMDF 1.0 driver use of WPP_INIT_TRACING and WPP_CLEANUP macros in DLLMain

/
// Driver specific #defines in trace header file (for example, trace.h)
//
#define MYDRIVER_TRACING_ID      L"Microsoft\\UMDF1.X\\UMDF1_XDriver1"


//
// DLL Entry Point - UMDF 1.0 example in the source file where you implement the DLL exports.
// 

extern "C"
BOOL
WINAPI
DllMain(
    HINSTANCE hInstance,
    DWORD dwReason,
    LPVOID lpReserved
    )
{
    if (dwReason == DLL_PROCESS_ATTACH) {
        WPP_INIT_TRACING(MYDRIVER_TRACING_ID);              // Initialize WPP tracing

        g_hInstance = hInstance;
        DisableThreadLibraryCalls(hInstance);

    } else if (dwReason == DLL_PROCESS_DETACH) {
        WPP_CLEANUP();                                                                                                              // Deactivate and cleanup WPP tracing
    }

    return _AtlModule.DllMain(dwReason, lpReserved);
}

Step 5: Instrument the driver code to generate trace messages at appropriate points

You can use any trace message function you choose, provided the trace message function, the trace flags, and levels are defined appropriately. The default trace message function is the DoTraceMessage macro. You can add this macro to your code to write messages to the log file. The following table lists some of the predefined trace message functions and the debug print functions you can use to create trace messages.

Example trace message functions When to use
DoTraceMessage

This is the default trace message function. The advantage of using DoTraceMessage is that the function is already defined for you. You can use the trace flags you specify in the WPP_CONFIG_GUIDS macro. The disadvantage of using DoTraceMessage, is that the function only takes one conditional parameter, that is, trace flags. If you want to use trace levels, to log only error or warning messages, you can use DoDebugTrace macro, or use TraceEvents, which uses both trace flags and trace levels.

TraceEvents

If you create a driver using WDF templates in Visual Studio, this is the default trace message function. The advantage of using TraceEvents is that the trace message function, the trace flags, and Trace Level are already defined for you. In addition, the templates also include instrumentation that writes messages to the log file upon function entry and exit.

KdPrint, KdPrintEx, DbgPrint, DbgPrintEx

The advantage of using the debug print functions is that you do not need to modify your existing debug print statements. You can easily switch from viewing messages in the debugger, to recording trace messages in a file. If you customized the trace message function to include one of the debug print functions, you do not need to do any more work. When you create a trace session with Logman or Tracelog, or another trace controller, you just specify the flags and levels for your provider. Any debug print statements that meet the conditions you specify are printed to the log.

Using DoTraceMessage statements

  1. Add the DoTraceMessage macro to your code like you would a debug print routine. The DoTraceMessage macro takes 3 parameters: the flag level (TraceFlagName), which defines the condition when the trace message is written, the Message string, and the optional variable list.

    DoTraceMessage(TraceFlagName, Message, [VariableList... ]
    

    For example, the following DoTraceMessage statement writes the name of the function that contains the DoTraceMessage statement when the TRACE_DRIVER flag, as defined in WPP_CONTROL_GUIDS, is enabled for the trace session.

         DoTraceMessage( TRACE_DRIVER, "\nEntering %!FUNC!" );
    
    

    The example uses a predefined string for the of the currently executing function (%FUNC!). For more information about WPP defined format specification strings, see What are the WPP extended format specification strings?

  2. To generate the trace message, create a trace session for your trace provider, using Logman or Tracelog, and specify a trace flag that sets the TRACE_DRIVER flag (bit 1, 0x2).

//
//  DoTraceMessage examples
// 

     ...

// writes the name of the function that contains the trace statement when the flag, TRACE_DRIVER (bit 1, 0x2), 
// as defined in WPP_CONTROL_GUIDS, is enabled for the trace session.

     DoTraceMessage( TRACE_DRIVER, "\nEntering %!FUNC!" );

     ...

// writes the name of the function, the line number, and the error code 

      DoTraceMessage(
            TRACE_DRIVER,
            "[%s] Failed at %d (error code= %d)\n",
            __FUNCTION__,
            __LINE__,
            dwLastError);

If you are using the Windows driver templates in Visual Studio, the TraceEvents macro is defined for you in the Trace.h header file.

Using TraceEvents statements

  1. Add the TraceEvents macro to your code like you would a debug print routine. The TraceEvents macro takes the following parameters: the trace level (Level) and the trace flag (Flags), which define the condition when the trace message is written, the Message string, and the optional variable list.

    TraceEvents(Level, Flags, Message, [VariableList... ]
    

    For example, the following TraceEvents statement writes the name of the function that contains the TraceEvents statement when the conditions specified in the Trace Level and Trace Flag parameters are met. The Trace Level is an integer value; anything at or below the Trace Level specified for that trace session will be traced. The TRACE_LEVEL_INFORMATION is defined in Evntrace.h and has the value 4. The TRACE_DRIVER flag (bit 1, 0x2) is defined in WPP_CONTROL_GUIDS. If this TRACE_DRIVER bit is set for the trace session and the Trace Level is 4 or greater, TraceEvents writes the trace message.

            TraceEvents(TRACE_LEVEL_INFORMATION, TRACE_DRIVER, "%!FUNC! Entry");
    
    

    The example uses a predefined string for the of the currently executing function (%FUNC!). For more information about WPP defined format specification strings, see What are the WPP extended format specification strings?

  2. To generate the trace message, create a trace session for your trace provider, using Logman or Tracelog. Specify a trace level to TRACE_LEVEL_INFORMATION (4) or greater, and specify a trace level that sets the TRACE_DRIVER bit (bit 1, 0x2).

//
//  TraceEvents examples
// 


    TraceEvents(TRACE_LEVEL_INFORMATION, TRACE_DRIVER, "%!FUNC! Entry");

//


    TraceEvents(TRACE_LEVEL_INFORMATION, DBG_INIT,
                       "OSRUSBFX2 Driver Sample - Driver Framework Edition.\n");

    TraceEvents(TRACE_LEVEL_INFORMATION, DBG_INIT,
                "Built %s %s\n", __DATE__, __TIME__);

Step 6: Modify the Visual Studio project to run the WPP preprocessor and build the solution

The WDK provides support for the WPP Preprocessor, so that you can run the preprocessor using Visual Studio and the MSBuild environment.

To run the WPP preprocessor

  1. Select and hold (or right-click) the driver project in Solutions Explorer and select Properties.
  2. In the project property page, select Configuration Properties and select WPP Tracing.
  3. Under General, set the Run WPP option to Yes.
  4. Under Command Line, add any additional options to customize tracing behavior. For info on what you can add, see WPP Preprocessor.
  5. Build the project or solution for your target configuration and platform. See Building a Driver with the WDK.

For information about the build process, see TraceWPP task and WDK and Visual Studio build environment.

You can also run the preprocessor separate from the build environment by using the TraceWPP tool (TraceWPP.exe). This tool is located in the bin/x86 and bin/x64 subdirectory of the WDK.

Step 7: Start a trace session to capture and verify your trace messages

To verify that you have set up WPP tracing correctly, you should install your driver or application on a test computer and then create a trace session to capture the trace messages. You can create a trace session for your trace provider, using any trace controller, such as Logman, Tracelog, or TraceView. You can have the messages written to a log file or sent to a kernel debugger. Depending upon the trace message functions you are using, you need to be sure to specify the trace flags and trace levels that will generate the messages.

For example, if you are using the trace levels defined in Evntrace.h, and you want to capture TRACE_LEVEL_INFORMATION (4) or greater, you need to set the level to 4. When you set the level to 4 for the trace session, all the informational (4), warning (3), error (2), and critical (1) messages will also be captured, assuming any other conditions, such as trace flags, are also satisfied.

To verify that all your messages are generated, you might just set the trace level and trace flags to maximum values so that all messages are generated. The trace flags use a bit mask (ULONG), so you could set all bits (for example, 0xFFFFFFFF). Trace levels are represented by a byte value. For example, if you are using Logman, you could specify, 0xFF for cover all levels.

(Example) Starting a trace session using Logman

logman create trace "myWPP_session" -p {11C3AAE4-0D88-41b3-43BD-AC38BF747E19} 0xffffffff 0xff -o c:\DriverTest\TraceFile.etl 

logman start "myWPP_session"

logman stop "myWPP_session"

(Example) Starting a trace session using TraceLog

tracelog -start MyTrace -guid  MyProvider.guid -f d:\traces\testtrace.etl -flag 2 -level 0xFFFF

The Tracelog command includes the -f parameter to specify the name and location of the event trace log file. It includes the -flag parameter to specify the flags set and the -level parameter to specify the level setting. You can omit these parameters, but some trace providers do not generate any trace messages unless you set the flag or the level. The Trace Level are defined in Evntrace.h file, and the trace levels provide a convenient way of classifying the trace messages as critical, error, warning, and informational messages.