Configure Microsoft Defender for Endpoint on iOS features
Applies to:
- Microsoft Defender for Endpoint Plan 1
- Microsoft Defender for Endpoint Plan 2
- Microsoft Defender XDR
Want to experience Defender for Endpoint? Sign up for a free trial.
Note
Defender for Endpoint on iOS would use a VPN in order to provide the Web Protection feature. This is not a regular VPN and is a local/self-looping VPN that does not take traffic outside the device.
Conditional Access with Defender for Endpoint on iOS
Microsoft Defender for Endpoint on iOS along with Microsoft Intune and Microsoft Entra ID enables enforcing Device compliance and Conditional Access policies based on device risk score. Defender for Endpoint is a Mobile Threat Defense (MTD) solution that you can deploy to use this capability via Intune.
For more information about how to set up Conditional Access with Defender for Endpoint on iOS, see Defender for Endpoint and Intune.
Web protection and VPN
By default, Defender for Endpoint on iOS includes and enables web protection, which helps to secure devices against web threats and protect users from phishing attacks. Anti-phishing and custom indicators (URL and Domain) are supported as part of web protection. IP based custom indicators are currently not supported on iOS. Web Content Filtering is currently not supported on mobile platforms (Android and iOS).
Defender for Endpoint on iOS uses a VPN in order to provide this capability. The VPN is local, and unlike traditional VPN, network traffic isn't sent outside the device.
While enabled by default, there might be some cases that require you to disable VPN. For example, you want to run some apps that don't work when a VPN is configured. In such cases, you can choose to disable VPN from the app on the device by following these steps:
On your iOS device, open the Settings app, select General and then VPN.
Select the i button for Microsoft Defender for Endpoint.
Toggle off Connect On Demand to disable VPN.
Note
Web protection isn't available when VPN is disabled. To re-enable web protection, open the Microsoft Defender for Endpoint app on the device, and then select Start VPN.
Disable web protection
Web protection is one of the key features of Defender for Endpoint and it requires a VPN to provide that capability. The VPN used is a local/loopback VPN and not a traditional VPN, however there are several reasons for which customers might not prefer the VPN. If you don't want to set up a VPN, you can disable web protection and deploy Defender for Endpoint without that feature. Other Defender for Endpoint features continue to work.
This configuration is available for both the enrolled (MDM) devices and unenrolled (MAM) devices. For customers with MDM, admins can configure web protection through managed devices in the App Config. For customers without enrollment, using MAM, admins can configure the web protection through managed apps in the App Config.
Configure web protection
Disable web protection using MDM
Use the following steps to disable web protection for enrolled devices.
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, Platform > iOS/iPadOS.
Select Microsoft Defender for Endpoint as the target app.
On the Settings page, select Use configuration designer, and then add
WebProtection
as the key, and set its value type toString
.- By default,
WebProtection = true
. An admin must setWebProtection = false
to turn off web protection. - Defender for Endpoint sends the heartbeat to the Microsoft Defender portal whenever a user opens the app.
- Select Next, and then assign this profile to targeted devices/users.
- By default,
Disable web protection using MAM
Use the following steps to disable web protection for unenrolled devices.
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed apps.
Give the policy a name.
Under Select Public Apps, choose Microsoft Defender for Endpoint as the target app.
On the Settings page, under General Configuration Settings, add
WebProtection
as the key, and set its value tofalse
.- By default,
WebProtection = true
. An admin can setWebProtection = false
to switch off web protection. - Defender for Endpoint sends the heartbeat to the Microsoft Defender portal whenever a user opens the app.
- Select Next, and then assign this profile to targeted devices/users.
- By default,
Note
The WebProtection
key is not applicable for the Control Filter in the list of supervised devices. If you want to disable web protection for supervised devices, you can remove the Control Filter profile.
Configure network protection
Network protection in Microsoft Defender for endpoint is disabled by default. Admins can use the following steps to configure network protection. This configuration is available for both enrolled devices through MDM config and unenrolled devices through MAM config.
Note
Only one policy should be created for network Protection, either through MDM or MAM. Network protection initialization requires the end user to open the app once.
Configure network protection using MDM
To set up network protection using MDM configuration for enrolled devices, follow these steps:
In the Microsoft Intune admin center, navigate to Apps > App configuration policies > Add > Managed devices.
Provide name and description for the policy. Under Platform, choose iOS/iPad.
In the targeted app, choose Microsoft Defender for Endpoint.
On the Settings page, choose configuration settings format Use configuration designer.
Add
DefenderNetworkProtectionEnable
as the configuration key. Set its value type asString
, and set its value tofalse
to disable network protection. (Network protection is enabled by default.)For other configurations related to network protection, add the following keys, choose the corresponding value type and value.
Key Value Type Default (true-enable, false-disable) Description DefenderOpenNetworkDetection
Integer 2 1 - Audit, 0 - Disable, 2 - Enable (default). This setting is managed by an IT Admin to audit, disable, or enable open network detection, respectively. In audit mode, alerts are sent only to the Microsoft Defender portal with no end-user experience. For end-user experience, set it to Enable
.DefenderEndUserTrustFlowEnable
String false true - enable, false - disable; This setting is used by IT admins to enable or disable the end user in-app experience to trust and untrust the unsecure and suspicious networks. DefenderNetworkProtectionAutoRemediation
String true true - enable, false - disable; This setting is used by the IT admin to enable or disable the remediation alerts that are sent when a user performs remediation activities like switching to safer WIFI access points. DefenderNetworkProtectionPrivacy
String true true - enable, false - disable; This setting is managed by IT admin to enable or disable privacy in network protection. If privacy is disabled, then user consent to share the malicious wifi is shown. If privacy is enabled, then no user consent is shown and no app data is collected. In the Assignments section, an admin can choose groups of users to include and exclude from the policy.
Review and create the configuration policy.
Configure network protection using MAM
Use the following procedure to set up MAM config for unenrolled devices for network protection (Authenticator device registration is required for MAM configuration) in iOS devices.
In the Microsoft Intune admin center, navigate to Apps > App configuration policies > Add > Managed apps > Create a new App configuration policy.
Provide a name and description to uniquely identify the policy. Then select Select Public apps, and choose Microsoft Defender for Platform iOS/iPadOS.
On the Settings page, add DefenderNetworkProtectionEnable as the key and the value as
false
to disable network protection. (Network protection is enabled by default.)For other configurations related to network protection, add the following keys and appropriate corresponding value.
Key Default (true - enable, false - disable) Description DefenderOpenNetworkDetection
2 1 - Audit, 0 - Disable, 2 - Enable (default). This setting is managed by an IT admin to enable, audit, or disable open network detection. In Audit mode, alerts are sent only to the ATP portal with no user side experience. For user experience, set the config to "Enable" mode. DefenderEndUserTrustFlowEnable
false true - enable, false - disable; This setting is used by IT admins to enable or disable the end user in-app experience to trust and untrust the unsecure and suspicious networks. DefenderNetworkProtectionAutoRemediation
true true - enable, false - disable; This setting is used by the IT admin to enable or disable the remediation alerts that are sent when a user performs remediation activities like switching to safer WIFI access points. DefenderNetworkProtectionPrivacy
true true - enable, false - disable; This setting is managed by IT admin to enable or disable privacy in network protection. If privacy is disabled, then user consent to share the malicious wifi is shown. If privacy is enabled, then no user consent is shown and no app data is collected. In the Assignments section, an admin can choose groups of users to include and exclude from the policy.
Review and create the configuration policy.
Coexistence of multiple VPN profiles
Apple iOS doesn't support multiple device-wide VPNs to be active simultaneously. While multiple VPN profiles can exist on the device, only one VPN can be active at a time.
Configure Microsoft Defender for Endpoint risk signal in app protection policy (MAM)
Microsoft Defender for Endpoint on iOS enables the App Protection Policy scenario. End-users can install the latest version of the app directly from the Apple app store. Ensure the device is registered to Authenticator with the same account being used to onboard in Defender for successful MAM registration.
Microsoft Defender for Endpoint can be configured to send threat signals to be used in App Protection Policies (APP, also known as MAM) on iOS/iPadOS. With this capability, you can use Microsoft Defender for Endpoint to protect access to corporate data from unenrolled devices as well.
Follow the steps in the following link to set up app protection policies with Microsoft Defender for Endpoint Configure Defender risk signals in app protection policy (MAM)
For more details on MAM or app protection policy, see iOS app protection policy settings.
Privacy controls
Microsoft Defender for Endpoint on iOS enables privacy controls for both admins and end users. This includes the controls for enrolled (MDM) and unenrolled (MAM) devices.
If you're using MDM, your admins can configure privacy controls through Managed devices in the App Config. If you're using MAM without enrollment, your admins can configure privacy controls through Managed apps in the App Config. End users also can configure privacy settings in Microsoft Defender app settings.
Configure privacy in phish alert report
Customers can now enable privacy control for the phish report sent by Microsoft Defender for Endpoint on iOS so that the domain name isn't included as part of a phish alert whenever a phish website is detected and blocked by Microsoft Defender for Endpoint.
Configure privacy controls in MDM
Use the following steps to enable privacy and not collect the domain name as part of the phish alert report for enrolled devices.
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, Platform > iOS/iPadOS, select the profile type.
Select Microsoft Defender for Endpoint as the target app.
On the Settings page, select Use configuration designer and add
DefenderExcludeURLInReport
as the key, and set its value type to Boolean.- To enable privacy and not collect the domain name, enter the value as
true
and assign this policy to users. By default, this value is set tofalse
. - For users with key set as
true
, the phish alert doesn't contain the domain name information whenever a malicious site is detected and blocked by Defender for Endpoint.
- To enable privacy and not collect the domain name, enter the value as
Select Next and assign this profile to targeted devices/users.
Configure privacy controls in MAM
Use the following steps to enable privacy and not collect the domain name as part of the phish alert report for unenrolled devices.
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed apps.
Give the policy a name.
Under Select Public Apps, choose Microsoft Defender for Endpoint as the target app.
On the Settings page, under the General Configuration Settings, add
DefenderExcludeURLInReport
as the key, and set its value astrue
.- To enable privacy and not collect the domain name, enter the value as
true
and assign this policy to users. By default, this value is set tofalse
. - For users with key set as
true
, the phish alert doesn't contain the domain name information whenever a malicious site is detected and blocked by Defender for Endpoint.
- To enable privacy and not collect the domain name, enter the value as
Select Next and assign this profile to targeted devices/users.
Configure end-user privacy controls in the Microsoft Defender app
These controls help the end user to configure the information shared to their organization.
For supervised devices, end-user controls aren't visible. Your admin decides and controls the settings. However, for unsupervised devices, the control is displayed under the Settings > Privacy.
Users see a toggle for Unsafe Site Info. This toggle is only visible if admin has set DefenderExcludeURLInReport = true
.
If enabled by an admin, users can specify whether to send unsafe site info to their organization. By default, it's set to false
, which means unsafe site information isn't sent. If user toggles it to true
, unsafe site details are sent.
Turning privacy controls on or off doesn't impact the device compliance check or conditional access.
Note
On Supervised devices with the configuration profile, Microsoft Defender for Endpoint can access the entire URL and if it is found to be phishing, it is blocked. On an Unsupervised device, Microsoft Defender for Endpoint has access to only the domain name, and if the domain is not a phishing URL, it won't be blocked.
Optional permissions
Microsoft Defender for Endpoint on iOS enables optional permissions in the onboarding flow. Currently the permissions required by Defender for Endpoint are mandatory in the onboarding flow. With this feature, admins can deploy Defender for Endpoint on BYOD devices without enforcing the mandatory VPN permission during onboarding. End users can onboard the app without the mandatory permissions and can later review these permissions. This feature is currently present only for enrolled devices (MDM).
Configure optional permissions using MDM
Admins can use the following steps to enable Optional VPN permission for enrolled devices.
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, select Platform > iOS/iPadOS.
Select Microsoft Defender for Endpoint as the target app.
On the Settings page, select Use configuration designer and add
DefenderOptionalVPN
as the key, and set its value type asBoolean
.- To enable optional VPN permission, enter value as
true
and assign this policy to users. By default, this value is set tofalse
. - For users with key set as
true
, the users are able to onboard the app without giving the VPN permission.
- To enable optional VPN permission, enter value as
Select Next and assign this profile to targeted devices/users.
Configure optional permissions as an end user
End users install and open the Microsoft Defender app to start onboarding.
- If an admin has set up optional permissions, then the user can Skip VPN permission and complete onboarding.
- Even if the user has skipped VPN, the device is able to onboard, and a heartbeat is sent.
- If VPN is disabled, web protection isn't active.
- Later, the user can enable web protection from within the app, which installs the VPN configuration on the device.
Note
Optional Permission is different from Disable Web Protection. Optional VPN Permission only helps to skip the permission during onboarding but its available for the end user to later review and enable it. While Disable Web Protection allows users to onboard the Defender for Endpoint app without the Web Protection. It cannot be enabled later.
Jailbreak detection
Microsoft Defender for Endpoint has the capability of detecting unmanaged and managed devices that are jailbroken. These jailbreak checks are done periodically. If a device is detected as jailbroken, these events occur:
- A high-risk alert is reported to the Microsoft Defender portal. If device Compliance and Conditional Access is set up based on device risk score, then the device is blocked from accessing corporate data.
- User data on app is cleared. When user opens the app after jailbreaking, the VPN profile (only Defender for Endpoint loopback VPN Profile) also is deleted, and no web protection is offered. VPN profiles delivered by Intune are not removed.
Configure compliance policy against jailbroken devices
To protect corporate data from being accessed on jailbroken iOS devices, we recommend that you set up the following compliance policy on Intune.
Note
Jailbreak detection is a capability provided by Microsoft Defender for Endpoint on iOS. However, we recommend that you setup this policy as an additional layer of defense against jailbreak scenarios.
Follow the steps below to create a compliance policy against jailbroken devices.
In the Microsoft Intune admin center, go to Devices > Compliance policies > Create Policy. Select "iOS/iPadOS" as platform and select Create.
Specify a name of the policy, such as Compliance Policy for Jailbreak.
In the compliance settings page, select to expand Device Health section and select
Block
in the Jailbroken devices field.In the Actions for noncompliance section, select the actions as per your requirements, and then select Next.
In the Assignments section, select the user groups that you want to include for this policy and then select Next.
In the Review + Create section, verify that all the information entered is correct and then select Create.
Configure custom indicators
Defender for Endpoint on iOS enables admins to configure custom indicators on iOS devices as well. For more information on how to configure custom indicators, see Manage indicators.
Note
Defender for Endpoint on iOS supports creating custom indicators only for URLs and domains. IP based custom indicators is not supported on iOS.
For iOS, no alerts are generated on Microsoft Defender XDR when the URL or domain set in the indicator is accessed.
Configure vulnerability assessment of apps
Reducing cyber risk requires comprehensive risk-based vulnerability management to identify, assess, remediate, and track all your biggest vulnerabilities across your most critical assets, all in a single solution. Visit this page to learn more about Microsoft Defender Vulnerability Management in Microsoft Defender for Endpoint.
Defender for Endpoint on iOS supports vulnerability assessments of OS and apps. Vulnerability assessment of iOS versions is available for both enrolled (MDM) and unenrolled (MAM) devices. Vulnerability assessment of apps is only for enrolled (MDM) devices. Admins can use the following steps to configure the vulnerability assessment of apps.
On a supervised device
Ensure the device is configured in the Supervised mode.
To enable the feature in the Microsoft Intune admin center, go to Endpoint Security > Microsoft Defender for Endpoint > Enable App sync for iOS/iPadOS devices.
Note
To get the list of all the apps including unmanaged apps, the admin has to enable Send full application inventory data on personally owned iOS/iPadOS devices setting in the Intune Admin Portal for the supervised devices marked as "Personal". For the supervised devices marked as "Corporate" in the Intune Admin Portal, the admin need not enable Send full application inventory data on personally owned iOS/iPadOS devices.
On an unsupervised device
To enable the feature in the Microsoft Intune admin center, go to Endpoint Security > Microsoft Defender for Endpoint > Enable App sync for iOS/iPadOS devices.
To get the list of all the apps including unmanaged apps, enable the toggle Send full application inventory data on personally owned iOS/iPadOS devices.
Use the following steps to configure the privacy setting.
Go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, Platform > iOS/iPadOS.
Select Microsoft Defender for Endpoint as the target app.
On the Settings page, select Use configuration designer and add
DefenderTVMPrivacyMode
as the key. Set its value type asString
.- To disable privacy and collect the list of apps installed, specify the value as
False
, and then assign this policy to users. - By default, this value is set to
True
for unsupervised devices. - For users with key set as
False
, Defender for Endpoint sends the list of apps installed on the device for vulnerability assessment.
- To disable privacy and collect the list of apps installed, specify the value as
Select Next and assign this profile to targeted devices/users.
Turning privacy controls on or off doesn't impact the device compliance check or conditional access.
Once the config is applied, end users must open the app to approve the privacy setting.
- The privacy approval screen appears only for unsupervised devices.
- Only if end-user approves the privacy, the app information is sent to the Defender for Endpoint console.
Once the client versions are deployed to target iOS devices, processing starts. Vulnerabilities found on those devices start showing up in the Defender Vulnerability Management dashboard. The processing might take few hours (max 24 hours) to complete. This time frame is especially true for the entire list of apps to show up in the software inventory.
Note
If you're using SSL inspection solution within your iOS device, add the domain names securitycenter.windows.com
(in commercial environments) and securitycenter.windows.us
(in GCC environments) for threat and vulnerability management features to work.
Disable sign out
Defender for Endpoint on iOS supports deployment without sign out button in the app to prevent users from signing out of the Defender app. This is important to prevent users from tampering the device.
This configuration is available for both the enrolled (MDM) devices as well as unenrolled (MAM) devices. Admins can use the following steps to configure the Disable sign out
Configure disable sign out using MDM
For enrolled devices (MDM)
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, and then select Platform > iOS/iPadOS.
Select
Microsoft Defender for Endpoint
as the target app.On the Settings page, select Use configuration designer, and add
DisableSignOut
as the key. Set its value type asString
.- By default,
DisableSignOut = false
. - An admin can set
DisableSignOut = true
to disable the sign-out button in the app. Users don't see the sign out button once the policy is pushed.
- By default,
Select Next, and then assign this policy to targeted devices/users.
Configure disable sign out using MAM
For unenrolled devices (MAM)
In the Microsoft Intune admin center, navigate to Apps > App configuration policies > Add > Managed apps.
Give the policy a name.
Under Select Public Apps, select
Microsoft Defender for Endpoint
as the target app.On the Settings page, add
DisableSignOut
as the key, and set its value astrue
.- By default,
DisableSignOut = false
. - An admin can set
DisableSignOut = true
to disable the sign-out button in the app. Users don't see the sign-out button once the policy is pushed.
- By default,
Select Next, and then assign this policy to targeted devices/users.
Device tagging
Defender for Endpoint on iOS enables bulk tagging the mobile devices during onboarding by allowing the admins to set up tags via Intune. Admin can configure the device tags through Intune via configuration policies and push them to user's devices. Once the User installs and activates Defender, the client app passes the device tags to the Microsoft Defender portal. The Device tags appear against the devices in the Device Inventory.
This configuration is available for both the enrolled (MDM) devices as well as unenrolled (MAM) devices. Admins can use the following steps to configure the Device tags.
Configure device tags using MDM
For enrolled devices (MDM)
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, and then select Platform > iOS/iPadOS.
Select
Microsoft Defender for Endpoint
as the target app.On the Settings page, select Use configuration designer, and add
DefenderDeviceTag
as the key. Set its value type asString
.- An admin can assign a new tag by adding the key
DefenderDeviceTag
and setting a value for the device tag. - An admin can edit an existing tag by modifying the value of the key
DefenderDeviceTag
. - An admin can delete an existing tag by removing the key
DefenderDeviceTag
.
- An admin can assign a new tag by adding the key
Select Next, and then assign this policy to targeted devices/users.
Configure device tags using MAM
For unenrolled devices (MAM)
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed apps.
Give the policy a name.
Under the Select Public Apps, choose
Microsoft Defender for Endpoint
as the target app.On the Settings page, add
DefenderDeviceTag
as the key (under General Configuration Settings).- An admin can assign a new tag by adding the key
DefenderDeviceTag
and setting a value for device tag. - An admin can edit an existing tag by modifying the value of the key
DefenderDeviceTag
. - An admin can delete an existing tag by removing the key
DefenderDeviceTag
.
- An admin can assign a new tag by adding the key
Select Next, and then assign this policy to targeted devices/users.
Note
The Microsoft Defender app must be opened for tags to be synced with Intune and passed to the Microsoft Defender portal. It may take up to 18 hours for tags to reflect in the portal.
Suppress OS update notifications
A configuration is available for customers to suppress OS update notification in Defender for Endpoint on iOS. Once the config key is set in the Intune App configuration policies, Defender for Endpoint will not send any notifications on the device for OS updates. However, when you open the Microsoft Defender app, the Device Health card is visible and show the state of your OS.
This configuration is available for both the enrolled (MDM) devices as well as unenrolled (MAM) devices. Admins can use the following steps to suppress the OS update Notification.
Configure OS update notifications using MDM
For enrolled devices (MDM)
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, select Platform > iOS/iPadOS.
Select
Microsoft Defender for Endpoint
as the target app.On the Settings page, select Use configuration designer, and add
SuppressOSUpdateNotification
as the key. Set its value type asString
.- By default,
SuppressOSUpdateNotification = false
. - An admin can set
SuppressOSUpdateNotification = true
to suppress the OS update notifications. - Select Next and assign this policy to targeted devices/users.
- By default,
Configure OS update notifications using MAM
For unenrolled devices (MAM)
In the Microsoft Intune admin center, navigate to Apps > App configuration policies > Add > Managed apps.
Give the policy a name.
Under the Select Public Apps, choose
Microsoft Defender for Endpoint
as the target app.On the Settings page, add
SuppressOSUpdateNotification
as the key (under General Configuration Settings).- By default,
SuppressOSUpdateNotification = false
. - An admin can set
SuppressOSUpdateNotification = true
to suppress the OS update notifications.
- By default,
Select Next and assign this policy to targeted devices/users.
Configure the option to send in-app feedback
Customers now have the option to configure the ability to send feedback data to Microsoft within the Defender for Endpoint app. Feedback data helps Microsoft improve products and troubleshoot issues.
Note
For US Government cloud customers, feedback data collection is disabled by default.
Use the following steps to configure the option to send feedback data to Microsoft:
In the Microsoft Intune admin center, go to Apps > App configuration policies > Add > Managed devices.
Give the policy a name, and select Platform > iOS/iPadOS as the profile type.
Select
Microsoft Defender for Endpoint
as the target app.On the Settings page, select Use configuration designer and add
DefenderFeedbackData
as the key, and set its value type asBoolean
.- To remove the ability of end-users to provide feedback, set the value as
false
and assign this policy to users. By default, this value is set totrue
. For US Government customers, the default value is set to 'false'. - For users with key set as
true
, there is an option to send Feedback data to Microsoft within the app (Menu > Help & Feedback > Send Feedback to Microsoft).
- To remove the ability of end-users to provide feedback, set the value as
Select Next and assign this profile to targeted devices/users.
Report unsafe sites
Phishing websites impersonate trustworthy websites for the purpose of obtaining your personal or financial information. Visit the Provide feedback about network protection page to report a website that could be a phishing site.
Tip
Do you want to learn more? Engage with the Microsoft Security community in our Tech Community: Microsoft Defender for Endpoint Tech Community.
Povratne informacije
https://aka.ms/ContentUserFeedback.
Kmalu na voljo: V letu 2024 bomo ukinili storitev Težave v storitvi GitHub kot mehanizem za povratne informacije za vsebino in jo zamenjali z novim sistemom za povratne informacije. Za več informacij si oglejte:Pošlji in prikaži povratne informacije za