Deli z drugimi prek


Recover an inactive mailbox

Microsoft 365 licensing guidance for security & compliance.

An inactive mailbox (which is a type of soft-deleted mailbox) is used to preserve a former employee's email after they leave your organization. If that employee returns to your organization or if another employee takes on the job responsibilities of the former employee, there are two ways that you can make the contents of the inactive mailbox available to a user:

  • Recover an inactive mailbox. If the former employee returns to your organization, or if a new employee is hired to take on the job responsibilities of the former employee, you can recover the contents of the inactive mailbox. This method converts the inactive mailbox to a new, active mailbox that contains the contents of the inactive mailbox. After it's recovered, the inactive mailbox no longer exists. The procedures in this article describe this method.

  • Restore an inactive mailbox. If another employee takes on the job responsibilities of the former employee, or if another user needs access to the contents of the inactive mailbox, you can restore (or merge) the contents of the inactive mailbox to an existing mailbox. You can also restore the archive from an inactive mailbox. For the procedures for this method, see Restore an inactive mailbox in Office 365.

See the More information section for more details about the differences between recovering and restoring an inactive mailbox, and for a description of what happens when an inactive mailbox is recovered. Both recover and restore operations are designed for email data and don't support restoring or recovering application data that can be stored in mailbox hidden folders.

Note

You can't recover or restore an inactive mailbox that's configured with an auto-expanding archive. If, for compliance reasons, you need to recover data from an inactive mailbox with an auto-expanding archive, use content search to export the data from the mailbox. This action is supported for eDiscovery purposes only, and can't be used as a backup solution. For instructions to use content search for the recovery of data for eDiscovery, see following articles:

Tip

If you're not an E5 customer, use the 90-day Microsoft Purview solutions trial to explore how additional Purview capabilities can help your organization manage data security and compliance needs. Start now at the Microsoft Purview compliance portal trials hub. Learn details about signing up and trial terms.

Requirements to recover an inactive mailbox

  • You must use Exchange Online PowerShell to recover an inactive mailbox. You can't use the Exchange admin center (EAC), or the Microsoft Purview portal or the Microsoft Purview compliance portal for this procedure. For step-by-step instructions to use Exchange Online PowerShell, see Connect to Exchange Online PowerShell.

  • Run the following command to get identity information for the inactive mailboxes in your organization.

    Get-Mailbox -InactiveMailboxOnly | Format-List Name,DistinguishedName,ExchangeGuid,PrimarySmtpAddress
    

    Use the information returned by this command to recover a specific inactive mailbox.

Recover inactive mailboxes

Use the New-Mailbox cmdlet with the InactiveMailbox parameter to recover an inactive mailbox.

  1. Create a variable that contains the properties of the inactive mailbox.

    $InactiveMailbox = Get-Mailbox -InactiveMailboxOnly -Identity <identity of inactive mailbox>
    

    Important

    In the previous command, use the value of the DistinguishedName or ExchangeGUID property to identify the inactive mailbox. These properties are unique for each mailbox in your organization, whereas it's possible that an active and an inactive mailbox might have the same primary SMTP address.

  2. This example uses the properties obtained in the previous command and recovers the inactive mailbox to an active mailbox for the user Ann Beebe. Be sure that the values specified for the Name and MicrosoftOnlineServicesID parameters are unique within your organization.

    New-Mailbox -InactiveMailbox $InactiveMailbox.DistinguishedName -Name annbeebe -FirstName Ann -LastName Beebe -DisplayName "Ann Beebe" -MicrosoftOnlineServicesID Ann.Beebe@contoso.com -Password (ConvertTo-SecureString -String 'P@ssw0rd' -AsPlainText -Force) -ResetPasswordOnNextLogon $true
    

    The primary SMTP address for the recovered inactive mailbox will have the same value as the one specified by the MicrosoftOnlineServicesID parameter.

After you recover an inactive mailbox, a new user account is also created. You need to activate this user account by assigning a license. To assign a license in the Microsoft 365 admin center, see Add users and assign licenses at the same time.

More information

  • What's the main difference between recovering and restoring an inactive mailbox? When you recover an inactive mailbox, the mailbox is converted to a new mailbox, the contents and folder structure of the inactive mailbox are retained, and the mailbox is linked to a new user account. After it's recovered, the inactive mailbox no longer exists, and any changes made to the content in the new mailbox will affect the content that was originally on hold in the inactive mailbox. Conversely, when you restore an inactive mailbox, the contents are merely copied to another mailbox. The inactive mailbox is preserved and remains an inactive mailbox. Any changes made to the content in the target mailbox won't affect the original content held in the inactive mailbox. The inactive mailbox can still be searched by using In-Place eDiscovery, its contents can be restored to another mailbox, or it can be recovered or deleted at a later date.

  • What happens when you recover an inactive mailbox? When you recover an inactive mailbox, the following things occur:

    • The hold that was applied to an inactive mailbox is changed or removed based on the type of hold that was applied to the inactive mailbox before it was recovered.

      • Microsoft 365 retention policy with Preservation Lock. If the inactive mailbox was included in a retention policy that has Preservation Lock, the recovered mailbox is assigned to the same retention policy.

      • Microsoft 365 retention policy without Preservation Lock. The inactive mailbox is removed from the Microsoft 365 retention policy. However, Litigation Hold is enabled on the recovered mailbox to prevent the deletion of mailbox content based on any organization-wide retention policies that delete content older than a specific age. You can keep the Litigation Hold or remove it. For more information, see Create a Litigation Hold.

      • Litigation Hold. If Litigation Hold was enabled for the inactive mailbox, it's removed from the recovered mailbox.

      • In-Place Hold In-Place Holds are removed from the recovered mailbox. This means the recovered mailbox is removed as a source mailbox from any In-Place Hold or In-Place eDiscovery search.

    • The single item recovery period (which is defined by the RetainDeletedItemsFor mailbox property) is set to 30 days. Typically, when a new mailbox is created in Exchange Online, this retention period is set to 14 days. Setting this to the maximum value of 30 days gives you more time to recover any data that's been permanently deleted (or purged) from the inactive mailbox. You can also disable single item recovery or set the single item recovery period back to the default of 14 days. For more information, see Enable or disable single item recovery for a mailbox.

    • Retention hold is enabled, and the retention hold duration is set to 30 days. This means that the default Exchange retention policy and any organization-wide or Exchange-wide Microsoft 365 retention policies that are assigned to the new mailbox won't be processed for 30 days. This gives the returning employee or the new owner of the recovered inactive mailbox time to manage the old messages. Otherwise, the Exchange or Microsoft 365 retention policy might delete old mailbox items (or move items to the archive mailbox, if it's enabled) that have expired based on the settings configured for the Exchange or Microsoft 365 retention policies. After 30 days, the retention hold expires, the RetentionHoldEnabled mailbox property is set to False, and the Managed Folder Assistant starts processing the policies assigned to the mailbox. If you don't need this additional time, you can just remove the retention hold. Alternatively, you can increase the duration of the retention hold by using the Set-Mailbox -EndDateForRetentionHold command. For more information, see Place a mailbox on retention hold.

  • Put a hold on the recovered mailbox if you need to preserve the original state of the inactive mailbox. To prevent the new mailbox owner or retention policy from permanently deleting any messages from the recovered inactive mailbox, you can place the mailbox on Litigation Hold. For more information, see Create a Litigation Hold.

  • What user ID can you use when recovering an inactive mailbox? When you recover an inactive mailbox, the value that you specify for the MicrosoftOnlineServicesID parameter can be different from the original one that was associated with the inactive mailbox. You can also use the original user ID. But as previously stated, make sure that the values used for Name and MicrosoftOnlineServicesID are unique within your organization when you recover the inactive mailbox.

  • What if the mailbox retention period for the inactive mailbox hasn't expired? If an inactive mailbox was soft-deleted less than 30 days ago, you can't use the New-Mailbox -InactiveMailbox command to recover it. You need to recover it by restoring the corresponding user account. For more information, see Delete a user from your organization.

  • How do you know if the soft-deleted mailbox retention period for an inactive mailbox has expired? Run the following command:

    Get-Mailbox -InactiveMailboxOnly <identity of inactive mailbox> | Format-List ExternalDirectoryObjectId
    
    • If there's no value for the ExternalDirectoryObjectId property, the mailbox retention period has expired, and you can recover the inactive mailbox by running the New-Mailbox -InactiveMailbox command.
    • If there's a value for the ExternalDirectoryObjectId property, the soft-deleted mailbox retention period hasn't expired and you have to recover the mailbox by restoring the user account.
  • Consider enabling the archive mailbox after you recover an inactive mailbox. This lets the returning user or new employee move old messages to the archive mailbox. And when the retention hold expires, the archive policy that is part of the default Exchange MRM retention policy assigned to Exchange Online mailboxes will move items that are two years or older to the archive mailbox. If you don't enable the archive mailbox, items older than two years will remain in the user's primary mailbox. For more information, see Enable archive mailboxes.