Uredi

Deli z drugimi prek

Troubleshoot transaction log errors with Azure SQL Database

  • Članek

Applies to: Azure SQL Database

You may see errors 9002 or 40552 when the transaction log is full and cannot accept new transactions. These errors occur when the database transaction log, managed by Azure SQL Database, exceeds thresholds for space and cannot continue to accept transactions. These errors are similar to issues with a full transaction log in SQL Server, but have different resolutions in SQL Server, Azure SQL Database, and Azure SQL Managed Instance.

Note

This article is focused on Azure SQL Database. Azure SQL Database is based on the latest stable version of the Microsoft SQL Server database engine, so much of the content is similar, though troubleshooting options and tools may differ from SQL Server.

For more on troubleshooting a transaction log in Azure SQL Managed Instance, see Troubleshoot transaction log errors with Azure SQL Managed Instance.

For more on troubleshooting a transaction log in SQL Server, see Troubleshoot a Full Transaction Log (SQL Server Error 9002).

Automated backups and the transaction log

In Azure SQL Database, transaction log backups are taken automatically. For frequency, retention, and more information, see Automated backups.

Free disk space, database file growth, and file location are also managed, so the typical causes and resolutions of transaction log issues are different from SQL Server.

Similar to SQL Server, the transaction log for each database is truncated whenever a log backup completes successfully. Truncation leaves empty space in the log file, which can then be used for new transactions. When the log file cannot be truncated by log backups, the log file grows to accommodate new transactions. If the log file grows to its maximum limit in Azure SQL Database, new write transactions fail.

For information on transaction log sizes, see:

Prevented transaction log truncation

To discover what is preventing log truncation in a given case, refer to log_reuse_wait_desc in sys.databases. The log reuse wait informs you to what conditions or causes are preventing the transaction log from being truncated by a regular log backup. For more information, see sys.databases (Transact-SQL).

SELECT [name], log_reuse_wait_desc FROM sys.databases;

For Azure SQL Database, it is recommended to connect to a specific user database, rather than the master database, to execute this query.

The following values of log_reuse_wait_desc in sys.databases may indicate the reason why the database's transaction log truncation is being prevented:

log_reuse_wait_desc Diagnosis Response required
NOTHING Typical state. There is nothing blocking the log from truncating. No.
CHECKPOINT A checkpoint is needed for log truncation. Rare. No response required unless sustained. If sustained, file a support request with Azure Support.
LOG BACKUP A log backup is required. No response required unless sustained. If sustained, file a support request with Azure Support.
ACTIVE BACKUP OR RESTORE A database backup is in progress. No response required unless sustained. If sustained, file a support request with Azure Support.
ACTIVE TRANSACTION An ongoing transaction is preventing log truncation. The log file cannot be truncated due to active and/or uncommitted transactions. See next section.
REPLICATION In Azure SQL Database, this may occur if change data capture (CDC) is enabled. Query sys.dm_cdc_errors and resolve errors. If unresolvable, file a support request with Azure Support.
AVAILABILITY_REPLICA Synchronization to the secondary replica is in progress. No response required unless sustained. If sustained, file a support request with Azure Support.

Log truncation prevented by an active transaction

The most common scenario for a transaction log that cannot accept new transactions is a long-running or blocked transaction.

Run this sample query to find uncommitted or active transactions and their properties.

  • Returns information about transaction properties, from sys.dm_tran_active_transactions.
  • Returns session connection information, from sys.dm_exec_sessions.
  • Returns request information (for active requests), from sys.dm_exec_requests. This query can also be used to identify sessions being blocked, look for the request_blocked_by. For more information, see Gather blocking information.
  • Returns the current request's text or input buffer text, using the sys.dm_exec_sql_text or sys.dm_exec_input_buffer DMVs. If the data returned by the text field of sys.dm_exec_sql_text is NULL, the request is not active but has an outstanding transaction. In that case, the event_info field of sys.dm_exec_input_buffer contains the last statement passed to the database engine.
SELECT [database_name] = db_name(s.database_id)
, tat.transaction_id, tat.transaction_begin_time, tst.session_id 
, session_open_transaction_count = tst.open_transaction_count
, transaction_duration_s = datediff(s, tat.transaction_begin_time, sysdatetime())
, input_buffer = ib.event_info
, request_text = CASE  WHEN r.statement_start_offset = 0 and r.statement_end_offset= 0 THEN left(est.text, 4000)
                       ELSE    SUBSTRING ( est.[text],    r.statement_start_offset/2 + 1, 
                                           CASE WHEN r.statement_end_offset = -1 THEN LEN (CONVERT(nvarchar(max), est.[text])) 
                                                ELSE r.statement_end_offset/2 - r.statement_start_offset/2 + 1
                                           END  )  END
, request_status = r.status
, request_blocked_by = r.blocking_session_id
, transaction_state = CASE tat.transaction_state    
                     WHEN 0 THEN 'The transaction has not been completely initialized yet.'
                     WHEN 1 THEN 'The transaction has been initialized but has not started.'
                     WHEN 2 THEN 'The transaction is active - has not been committed or rolled back.'
                     WHEN 3 THEN 'The transaction has ended. This is used for read-only transactions.'
                     WHEN 4 THEN 'The commit process has been initiated on the distributed transaction. This is for distributed transactions only. The distributed transaction is still active but further processing cannot take place.'
                     WHEN 5 THEN 'The transaction is in a prepared state and waiting resolution.'
                     WHEN 6 THEN 'The transaction has been committed.'
                     WHEN 7 THEN 'The transaction is being rolled back.'
                     WHEN 8 THEN 'The transaction has been rolled back.' END 
, transaction_name = tat.name
, azure_dtc_state    --Applies to: Azure SQL Database only
             =    CASE tat.dtc_state 
                 WHEN 1 THEN 'ACTIVE'
                 WHEN 2 THEN 'PREPARED'
                 WHEN 3 THEN 'COMMITTED'
                 WHEN 4 THEN 'ABORTED'
                 WHEN 5 THEN 'RECOVERED' END
, transaction_type = CASE tat.transaction_type    WHEN 1 THEN 'Read/write transaction'
                                             WHEN 2 THEN 'Read-only transaction'
                                             WHEN 3 THEN 'System transaction'
                                             WHEN 4 THEN 'Distributed transaction' END
, tst.is_user_transaction
, local_or_distributed = CASE tst.is_local WHEN 1 THEN 'Local transaction, not distributed' WHEN 0 THEN 'Distributed transaction or an enlisted bound session transaction.' END
, transaction_uow    --for distributed transactions. 
, s.login_time, s.host_name, s.program_name, s.client_interface_name, s.login_name, s.is_user_process
, session_cpu_time = s.cpu_time, session_logical_reads = s.logical_reads, session_reads = s.reads, session_writes = s.writes
, observed = sysdatetimeoffset()
FROM sys.dm_tran_active_transactions AS tat 
INNER JOIN sys.dm_tran_session_transactions AS tst  on tat.transaction_id = tst.transaction_id
INNER JOIN Sys.dm_exec_sessions AS s on s.session_id = tst.session_id 
LEFT OUTER JOIN sys.dm_exec_requests AS r on r.session_id = s.session_id
CROSS APPLY sys.dm_exec_input_buffer(s.session_id, null) AS ib 
OUTER APPLY sys.dm_exec_sql_text (r.sql_handle) AS est;

File management to free more space

If the transaction log is prevented from truncating in Azure SQL Database elastic pools, freeing space for the elastic pool may be part of the solution. However, resolving the root the condition blocking transaction log file truncation is key. In some cases, temporarily creating more disk space allows long-running transactions to complete, removing the condition blocking the transaction log file from truncating with a normal transaction log backup. However, freeing up space may provide only temporary relief until the transaction log grows again.

For more information on managing the file space of databases and elastic pools, see Manage file space for databases in Azure SQL Database.

Error 40552: The session has been terminated because of excessive transaction log space usage

40552: The session has been terminated because of excessive transaction log space usage. Try modifying fewer rows in a single transaction.

To resolve this issue, try the following methods:

  1. The issue can occur in any DML operation such as insert, update, or delete. Review the transaction to avoid unnecessary writes. Try to reduce the number of rows that are operated on immediately by implementing batching or splitting into multiple smaller transactions. For more information, see How to use batching to improve SQL Database application performance.
  2. The issue can occur because of index rebuild operations. To avoid this issue, ensure the following formula is true: (number of rows that are affected in the table) multiplied by (the average size of field that's updated in bytes + 80) < 2 gigabytes (GB). For large tables, consider creating partitions and performing index maintenance only on some partitions of the table. For more information, see Create Partitioned Tables and Indexes.
  3. If you perform bulk inserts using the bcp.exe utility or the System.Data.SqlClient.SqlBulkCopy class, try using the -b batchsize or BatchSize options to limit the number of rows copied to the server in each transaction. For more information, see bcp Utility.
  4. If you are rebuilding an index with the ALTER INDEX statement, use the SORT_IN_TEMPDB = ON, ONLINE = ON, and RESUMABLE=ON options. With resumable indexes, log truncation is more frequent. For more information, see ALTER INDEX (Transact-SQL).

Note

For more information on other resource governance errors, see Resource governance errors.

Next steps