Microsoft 365: Configuration for online services to use the Azure Rights Management service

Članek
10/10/2022

Use the following sections to help you configure Exchange Online, Microsoft SharePoint, and Microsoft OneDrive to use the Azure Rights Management service from Azure Information Protection.

Exchange Online: IRM Configuration

For information about how Exchange Online works with the Azure Rights Management service, see the Exchange Online and Exchange Server section from How Office applications and services support Azure Rights Management.

Exchange Online might already be enabled to use the Azure Rights Management service. To check, run the following commands:

If this is the first time that you have used Windows PowerShell for Exchange Online on your computer, you must configure Windows PowerShell to run signed scripts. Start your Windows PowerShell session by using the Run as administrator option, and then type:
```
Set-ExecutionPolicy RemoteSigned
```
Press Y to confirm.
In your Windows PowerShell session, sign in to Exchange Online by using an account that is enabled for remote Shell access. By default, all accounts that are created in Exchange Online are enabled for remote Shell access but this can be disabled (and enabled) by using the Set-User <UserIdentity> -RemotePowerShellEnabled command.

To sign in, first type:
```
Connect-ExchangeOnline
```
Then, in the Windows PowerShell credential request dialog box, supply your Microsoft 365 user name and password.
Run the Get-IRMConfiguration command to view your Exchange Online configuration for the protection service:
```
Get-IRMConfiguration
```
From the output, locate the AzureRMSLicensingEnabled value:
- If AzureRMSLicensingEnabled is set to True, Exchange Online is already enabled for the Azure Rights Management service.
- If AzureRMSLicensingEnabled is set False, run the follow command to enable Exchange Online for the Azure Rights Management service: Set-IRMConfiguration -AzureRMSLicensingEnabled $true
To test that Exchange Online is configured successfully, run the following command:
```
Test-IRMConfiguration -Sender <user email address>
```
For example: Test-IRMConfiguration -Sender adams@contoso.com

This command runs a series of checks that includes verifying connectivity to the service, retrieving the configuration, retrieving URIs, licenses, and any templates. In the Windows PowerShell session, you will see the results of each and at the end, if everything passes these checks: OVERALL RESULT: PASS

When Exchange Online is enabled to use the Azure Rights Management service, you can configure the following features:

Purview Message Encryption using mail flow rules.
Encryption using data loss prevention (DLP) policies.
Sensitivity labels with encryption using Outlook on the Web, Mac, iOS and Android.
Auto-labeling policies in Exchange to apply sensitivity labels with encryption to mail and protected voice mail messages.

SharePoint in Microsoft 365 and OneDrive: IRM Configuration

For information about how SharePoint IRM works with the Azure Rights Management service, see SharePoint in Microsoft 365 and SharePoint Server from the Rights Management protection section of this documentation.

To configure SharePoint in Microsoft 365 and OneDrive to support the Azure Rights Management service, you must first enable the information rights management (IRM) service for SharePoint by using the SharePoint admin center. Then, site owners can IRM-protect their SharePoint lists and document libraries, and users can IRM-protect their OneDrive library so that documents that are saved there, and shared with others, are automatically protected by the Azure Rights Management service.

Note

IRM-protected libraries for SharePoint in Microsoft 365 and OneDrive require the latest version of the new OneDrive sync client (OneDrive.exe), and the version of the RMS client from the Microsoft Download Center. Install this version of the RMS client even if you have installed the Azure Information Protection client. For more information about this deployment scenario, see Deploy the new OneDrive sync client in an enterprise environment.

To enable the information rights management (IRM) service for SharePoint, see the following instructions from the Office documentation:

Set up Information Rights Management (IRM) in the SharePoint admin center

This configuration is done by the Microsoft 365 administrator.

Configuring IRM for libraries and lists

After you have enabled the IRM service for SharePoint, site owners can IRM-protect their SharePoint document libraries and lists. For instructions, see the following from the Office website:

Apply Information Rights Management to a list or library

This configuration is done by the SharePoint site administrator.

Configuring IRM for OneDrive

After you have enabled the IRM service for SharePoint, users' OneDrive document library or individual folders can then be configured for Rights Management protection. Users can configure this for themselves by using their OneDrive website. Although administrators can't configure this protection for them by using the SharePoint admin center, you can do this by using Windows PowerShell.

Note

For more information about configuring OneDrive, see the OneDrive documentation.

Configuration for users

Give users the following instructions so that they can configure their OneDrive to protect their business files.

Sign in to Microsoft 365 with your work or school account and go to the OneDrive website.
In the navigation pane, at the bottom, select Return to classic OneDrive.
Select the Settings icon. In the Settings pane, if the Ribbon is set to Off, select this setting to turn the ribbon on.
To configure all OneDrive files to be protected, select the LIBRARY tab from the ribbon, and then select Library Settings.
On the Documents > Settings page, in the Permissions and Management section, select Information Rights Management.
On the Information Rights Management Settings page, select Restrict permissions on this library on download check box. Specify your choice of name and a description for the permissions, and optionally, click SHOW OPTIONS to configure optional configurations, and then click OK.

Because this configuration relies on users rather than an administrator to IRM-protect their OneDrive files, educate users about the benefits of protecting their files and how to do this. For example, explain that when they share a document from OneDrive, only people they authorize can access it with any restrictions that they configure, even if the file is renamed and copied somewhere else.

Configuration for administrators

Although you can't configure IRM for users' OneDrive by using the SharePoint admin center, you can do this by using Windows PowerShell. To enable IRM for these libraries, follow these steps:

Download and install the SharePoint Client Components SDK.
Download and install the SharePoint Management Shell.

Copy the contents of the following script and name the file Set-IRMOnOneDriveForBusiness.ps1 on your computer.

**Disclaimer**: This sample script isn't supported under any Microsoft standard support program or service. This sample script is provided AS IS without warranty of any kind.

# Requires Windows PowerShell version 3

<#
  Description:

    Configures IRM policy settings for OneDrive and can also be used for SharePoint libraries and lists

 Script Installation Requirements:

   SharePoint Client Components SDK
   https://www.microsoft.com/download/details.aspx?id=42038

   SharePoint Management Shell
   https://www.microsoft.com/download/details.aspx?id=35588

======
#>

# URL will be in the format https://<tenant-name>-admin.sharepoint.com
$sharepointAdminCenterUrl = "https://contoso-admin.sharepoint.com"

$tenantAdmin = "admin@contoso.com"

$webUrls = @("https://contoso-my.sharepoint.com/personal/user1_contoso_com",
             "https://contoso-my.sharepoint.com/personal/user2_contoso_com",
             "https://contoso-my.sharepoint.com/personal/user3_contoso_com")

<# As an alternative to specifying the URLs as an array, you can import them from a CSV file (no header, single value per row).
   Then, use: $webUrls = Get-Content -Path "File_path_and_name.csv"

#>

$listTitle = "Documents"

function Load-SharePointOnlineClientComponentAssemblies
{
    [cmdletbinding()]
    param()

    process
    {
        # assembly location: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\16\ISAPI
        try
        {
            Write-Verbose "Loading Assembly: Microsoft.Office.Client.Policy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.Office.Client.Policy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.Office.Client.TranslationServices, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.Office.Client.TranslationServices, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.DocumentManagement, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.DocumentManagement, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Publishing, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Publishing, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Runtime, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Runtime, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Search.Applications, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Search.Applications, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Search, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Search, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Taxonomy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Taxonomy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.UserProfiles, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.UserProfiles, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            return $true
        }
        catch
        {
            if($_.Exception.Message -match "Could not load file or assembly")
            {
                Write-Error -Message "Unable to load the SharePoint Server 2013 Client Components.`nDownload Location: https://www.microsoft.com/download/details.aspx?id=42038"
            }
            else
            {
                Write-Error -Exception $_.Exception
            }
            return $false
        }
    }
}

function Load-SharePointOnlineModule
{
    [cmdletbinding()]
    param()

    process
    {
        do
        {
            # Installation location: C:\Program Files\SharePoint Online Management Shell\Microsoft.Online.SharePoint.PowerShell
            $spoModule = Get-Module -Name Microsoft.Online.SharePoint.PowerShell -ErrorAction SilentlyContinue

            if(-not $spoModule)
            {
                try
                {
                    Import-Module Microsoft.Online.SharePoint.PowerShell -DisableNameChecking
                    return $true
                }
                catch
                {
                    if($_.Exception.Message -match "Could not load file or assembly")
                    {
                        Write-Error -Message "Unable to load the SharePoint Online Management Shell.`nDownload Location: https://www.microsoft.com/download/details.aspx?id=35588"
                    }
                    else
                    {
                        Write-Error -Exception $_.Exception
                    }
                    return $false
                }
            }
            else
            {
                return $true
            }
        }
        while(-not $spoModule)
    }
}

function Set-IrmConfiguration
{
    [cmdletbinding()]
    param(
        [parameter(Mandatory=$true)][Microsoft.SharePoint.Client.List]$List,
        [parameter(Mandatory=$true)][string]$PolicyTitle,
        [parameter(Mandatory=$true)][string]$PolicyDescription,
        [parameter(Mandatory=$false)][switch]$IrmReject,
        [parameter(Mandatory=$false)][DateTime]$ProtectionExpirationDate,
        [parameter(Mandatory=$false)][switch]$DisableDocumentBrowserView,
        [parameter(Mandatory=$false)][switch]$AllowPrint,
        [parameter(Mandatory=$false)][switch]$AllowScript,
        [parameter(Mandatory=$false)][switch]$AllowWriteCopy,
        [parameter(Mandatory=$false)][int]$DocumentAccessExpireDays,
        [parameter(Mandatory=$false)][int]$LicenseCacheExpireDays,
        [parameter(Mandatory=$false)][string]$GroupName
    )

    process
    {
        Write-Verbose "Applying IRM Configuration on '$($List.Title)'"

        # reset the value to the default settings
        $list.InformationRightsManagementSettings.Reset()

        $list.IrmEnabled = $true

        # IRM Policy title and description

            $list.InformationRightsManagementSettings.PolicyTitle       = $PolicyTitle
            $list.InformationRightsManagementSettings.PolicyDescription = $PolicyDescription

        # Set additional IRM library settings

            # Do not allow users to upload documents that do not support IRM
            $list.IrmReject = $IrmReject.IsPresent

            $parsedDate = Get-Date
            if([DateTime]::TryParse($ProtectionExpirationDate, [ref]$parsedDate))
            {
                # Stop restricting access to the library at <date>
                $list.IrmExpire = $true
                $list.InformationRightsManagementSettings.DocumentLibraryProtectionExpireDate = $ProtectionExpirationDate
            }

            # Prevent opening documents in the browser for this Document Library
            $list.InformationRightsManagementSettings.DisableDocumentBrowserView = $DisableDocumentBrowserView.IsPresent

        # Configure document access rights

            # Allow viewers to print
            $list.InformationRightsManagementSettings.AllowPrint = $AllowPrint.IsPresent

            # Allow viewers to run script and screen reader to function on downloaded documents
            $list.InformationRightsManagementSettings.AllowScript = $AllowScript.IsPresent

            # Allow viewers to write on a copy of the downloaded document
            $list.InformationRightsManagementSettings.AllowWriteCopy = $AllowWriteCopy.IsPresent

            if($DocumentAccessExpireDays)
            {
                # After download, document access rights will expire after these number of days (1-365)
                $list.InformationRightsManagementSettings.EnableDocumentAccessExpire = $true
                $list.InformationRightsManagementSettings.DocumentAccessExpireDays   = $DocumentAccessExpireDays
            }

        # Set group protection and credentials interval

            if($LicenseCacheExpireDays)
            {
                # Users must verify their credentials using this interval (days)
                $list.InformationRightsManagementSettings.EnableLicenseCacheExpire = $true
                $list.InformationRightsManagementSettings.LicenseCacheExpireDays   = $LicenseCacheExpireDays
            }

            if($GroupName)
            {
                # Allow group protection. Default group:
                $list.InformationRightsManagementSettings.EnableGroupProtection = $true
                $list.InformationRightsManagementSettings.GroupName             = $GroupName
            }
    }
    end
    {
        if($list)
        {
            Write-Verbose "Committing IRM configuration settings on '$($list.Title)'"
            $list.InformationRightsManagementSettings.Update()
            $list.Update()
            $script:clientContext.Load($list)
            $script:clientContext.ExecuteQuery()
        }
    }
}

function Get-CredentialFromCredentialCache
{
    [cmdletbinding()]
    param([string]$CredentialName)

    #if( Test-Path variable:\global:CredentialCache )
    if( Get-Variable O365TenantAdminCredentialCache -Scope Global -ErrorAction SilentlyContinue )
    {
        if($global:O365TenantAdminCredentialCache.ContainsKey($CredentialName))
        {
            Write-Verbose "Credential Cache Hit: $CredentialName"
            return $global:O365TenantAdminCredentialCache[$CredentialName]
        }
    }
    Write-Verbose "Credential Cache Miss: $CredentialName"
    return $null
}

function Add-CredentialToCredentialCache
{
    [cmdletbinding()]
    param([System.Management.Automation.PSCredential]$Credential)

    if(-not (Get-Variable CredentialCache -Scope Global -ErrorAction SilentlyContinue))
    {
        Write-Verbose "Initializing the Credential Cache"
        $global:O365TenantAdminCredentialCache = @{}
    }

    Write-Verbose "Adding Credential to the Credential Cache"
    $global:O365TenantAdminCredentialCache[$Credential.UserName] = $Credential
}

# load the required assemblies and Windows PowerShell modules

    if(-not ((Load-SharePointOnlineClientComponentAssemblies) -and (Load-SharePointOnlineModule)) ) { return }

# Add the credentials to the client context and SharePoint service connection

    # check for cached credentials to use
    $o365TenantAdminCredential = Get-CredentialFromCredentialCache -CredentialName $tenantAdmin

    if(-not $o365TenantAdminCredential)
    {
        # when credentials are not cached, prompt for the tenant admin credentials
        $o365TenantAdminCredential = Get-Credential -UserName $tenantAdmin -Message "Enter the password for the Microsoft 365 admin"

        if(-not $o365TenantAdminCredential -or -not $o365TenantAdminCredential.UserName -or $o365TenantAdminCredential.Password.Length -eq 0 )
        {
            Write-Error -Message "Could not validate the supplied tenant admin credentials"
            return
        }

        # add the credentials to the cache
        Add-CredentialToCredentialCache -Credential $o365TenantAdminCredential
    }

# connect to Office365 first, required for SharePoint cmdlets to run

    Connect-SPOService -Url $sharepointAdminCenterUrl -Credential $o365TenantAdminCredential

# enumerate each of the specified site URLs

    foreach($webUrl in $webUrls)
    {
        $grantedSiteCollectionAdmin = $false

        try
        {
            # establish the client context and set the credentials to connect to the site
            $script:clientContext = New-Object Microsoft.SharePoint.Client.ClientContext($webUrl)
            $script:clientContext.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($o365TenantAdminCredential.UserName, $o365TenantAdminCredential.Password)

            # initialize the site and web context
            $script:clientContext.Load($script:clientContext.Site)
            $script:clientContext.Load($script:clientContext.Web)
            $script:clientContext.ExecuteQuery()

            # load and ensure the tenant admin user account if present on the target SharePoint site
            $tenantAdminUser = $script:clientContext.Web.EnsureUser($o365TenantAdminCredential.UserName)
            $script:clientContext.Load($tenantAdminUser)
            $script:clientContext.ExecuteQuery()

            # check if the tenant admin is a site admin
            if( -not $tenantAdminUser.IsSiteAdmin )
            {
                try
                {
                    # grant the tenant admin temporary admin rights to the site collection
                    Set-SPOUser -Site $script:clientContext.Site.Url -LoginName $o365TenantAdminCredential.UserName -IsSiteCollectionAdmin $true | Out-Null
                    $grantedSiteCollectionAdmin = $true
                }
                catch
                {
                    Write-Error $_.Exception
                    return
                }
            }

            try
            {
                # load the list orlibrary using CSOM

                $list = $null
                $list = $script:clientContext.Web.Lists.GetByTitle($listTitle)
                $script:clientContext.Load($list)
                $script:clientContext.ExecuteQuery()

                # **************  ADMIN INSTRUCTIONS  **************
                # If necessary, modify the following Set-IrmConfiguration parameters to match your required values
                # The supplied options and values are for example only
                # Example that shows the Set-IrmConfiguration command with all parameters: Set-IrmConfiguration -List $list -PolicyTitle "Protected Files" -PolicyDescription "This policy restricts access to authorized users" -IrmReject -ProtectionExpirationDate $(Get-Date).AddDays(180) -DisableDocumentBrowserView -AllowPrint -AllowScript -AllowWriteCopy -LicenseCacheExpireDays 25 -DocumentAccessExpireDays 90

                Set-IrmConfiguration -List $list -PolicyTitle "Protected Files" -PolicyDescription "This policy restricts access to authorized users"  
            }
            catch
            {
                Write-Error -Message "Error setting IRM configuration on site: $webUrl.`nError Details: $($_.Exception.ToString())"
            }
       }
       finally
       {
            if($grantedSiteCollectionAdmin)
            {
                # remove the temporary admin rights to the site collection
                Set-SPOUser -Site $script:clientContext.Site.Url -LoginName $o365TenantAdminCredential.UserName -IsSiteCollectionAdmin $false | Out-Null
            }
       }
    }

Disconnect-SPOService -ErrorAction SilentlyContinue

Review the script and make the following changes:
1. Search for $sharepointAdminCenterUrl and replace the example value with your own SharePoint admin center URL.
  
  You'll find this value as the base URL when you go into the SharePoint admin center, and it has the following format: https://<tenant_name>-admin.sharepoint.com
  
  For example, if the tenant name is "contoso", then you would specify: https://contoso-admin.sharepoint.com
2. Search for $tenantAdmin and replace the example value with your own fully qualified global administrator account for Microsoft 365.
  
  This value is the same as the one you use to sign in to the Microsoft 365 admin center as the global administrator and has the following format: user_name@<tenant domain name>.com
  
  For example, if the Microsoft 365 global administrator user name is "admin" for the "contoso.com" tenant domain, you would specify: admin@contoso.com
3. Search for $webUrls and replace the example values with your users' OneDrive web URLs, adding or deleting as many entries as you need.
  
  Alternatively, see the comments in the script about how to replace this array by importing a .CSV file that contains all the URLs you need to configure. We've provided another sample script to automatically search for and extract the URLs to populate this .CSV file. When you're ready to do this, use the Additional script to output all OneDrive URLs to a .CSV file section immediately after these steps.
  
  The web URL for the user's OneDrive is in the following format: https://<tenant name>-my.sharepoint.com/personal/<user_name>_<tenant name>_com
  
  For example, if the user in the contoso tenant has a user name of "rsimone", you would specify: https://contoso-my.sharepoint.com/personal/rsimone_contoso_com
4. Because we're using the script to configure OneDrive, don't change the value of Documents for the $listTitle variable.
5. Search for ADMIN INSTRUCTIONS. If you make no changes to this section, the user's OneDrive will be configured for IRM with the policy title of "Protected Files" and the description of "This policy restricts access to authorized users". No other IRM options will be set, which is probably appropriate for most environments. However, you can change the suggested policy title and description, and also add any other IRM options that are appropriate for your environment. See the commented example in the script to help you construct your own set of parameters for the Set-IrmConfiguration command.
Save the script and sign it. If you don't sign the script (more secure), Windows PowerShell must be configured on your computer to run unsigned scripts. To do this, run a Windows PowerShell session with the Run as Administrator option, and type: Set-ExecutionPolicy Unrestricted. However, this configuration lets all unsigned scripts run (less secure).

For more information about signing Windows PowerShell scripts, see about_Signing in the PowerShell documentation library.
Run the script and if prompted, supply the password for the Microsoft 365 admin account. If you modify the script and run it in the same Windows PowerShell session, you won't be prompted for credentials.

Tip

You can also use this script to configure IRM for a SharePoint library. For this configuration, you will likely want to enable the additional option Do not allow users to upload documents that do not support IRM, to ensure that the library contains only protected documents. To do that, add the -IrmReject parameter to the Set-IrmConfiguration command in the script.

You would also need to modify the $webUrls variable (for example, https://contoso.sharepoint.com) and $listTitle variable (for example, $Reports).

If you need to disable IRM for user's OneDrive libraries, see the Script to disable IRM for OneDrive section.

Additional script to output all OneDrive URLs to a .CSV file

For step 4c above, you can use the following Windows PowerShell script to extract the URLs for all users' OneDrive libraries, which you can then check, edit if necessary, and then import into the main script.

This script also requires the SharePoint Client Components SDK and the SharePoint Management Shell. Follow the same instructions to copy and paste it, save the file locally (for example, "Report-OneDriveForBusinessSiteInfo.ps1"), modify the $sharepointAdminCenterUrl and $tenantAdmin values as before, and then run the script.

**Disclaimer**: This sample script isn't supported under any Microsoft standard support program or service. This sample script is provided AS IS without warranty of any kind.

# Requires Windows PowerShell version 3

<#
  Description:

    Queries the search service of a Microsoft 365 tenant to retrieve all OneDrive sites.  
    Details of the discovered sites are written to a .CSV file (by default,"OneDriveForBusinessSiteInfo_<date>.csv").

 Script Installation Requirements:

   SharePoint Client Components SDK
   https://www.microsoft.com/download/details.aspx?id=42038

   SharePoint Management Shell
   https://www.microsoft.com/download/details.aspx?id=35588

======
#>

# URL will be in the format https://<tenant-name>-admin.sharepoint.com
$sharepointAdminCenterUrl = "https://contoso-admin.sharepoint.com"

$tenantAdmin = "admin@contoso.onmicrosoft.com"                           

$reportName = "OneDriveForBusinessSiteInfo_$((Get-Date).ToString("yyyy-MM-dd_hh.mm.ss")).csv"

$oneDriveForBusinessSiteUrls= @()
$resultsProcessed = 0

function Load-SharePointOnlineClientComponentAssemblies
{
    [cmdletbinding()]
    param()

    process
    {
        # assembly location: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\16\ISAPI
        try
        {
            Write-Verbose "Loading Assembly: Microsoft.Office.Client.Policy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.Office.Client.Policy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.Office.Client.TranslationServices, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.Office.Client.TranslationServices, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.DocumentManagement, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.DocumentManagement, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Publishing, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Publishing, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Runtime, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Runtime, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Search.Applications, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Search.Applications, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Search, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Search, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Taxonomy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Taxonomy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.UserProfiles, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.UserProfiles, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            return $true
        }
        catch
        {
            if($_.Exception.Message -match "Could not load file or assembly")
            {
                Write-Error -Message "Unable to load the SharePoint Server 2013 Client Components.`nDownload Location: https://www.microsoft.com/download/details.aspx?id=42038"
            }
            else
            {
                Write-Error -Exception $_.Exception
            }
            return $false
        }
    }
}

function Load-SharePointOnlineModule
{
    [cmdletbinding()]
    param()

    process
    {
        do
        {
            # Installation location: C:\Program Files\SharePoint Online Management Shell\Microsoft.Online.SharePoint.PowerShell
            $spoModule = Get-Module -Name Microsoft.Online.SharePoint.PowerShell -ErrorAction SilentlyContinue

            if(-not $spoModule)
            {
                try
                {
                    Import-Module Microsoft.Online.SharePoint.PowerShell -DisableNameChecking
                    return $true
                }
                catch
                {
                    if($_.Exception.Message -match "Could not load file or assembly")
                    {
                        Write-Error -Message "Unable to load the SharePoint Online Management Shell.`nDownload Location: https://www.microsoft.com/download/details.aspx?id=35588"
                    }
                    else
                    {
                        Write-Error -Exception $_.Exception
                    }
                    return $false
                }
            }
            else
            {
                return $true
            }
        }
        while(-not $spoModule)
    }
}

function Get-CredentialFromCredentialCache
{
    [cmdletbinding()]
    param([string]$CredentialName)

    #if( Test-Path variable:\global:CredentialCache )
    if( Get-Variable O365TenantAdminCredentialCache -Scope Global -ErrorAction SilentlyContinue )
    {
        if($global:O365TenantAdminCredentialCache.ContainsKey($CredentialName))
        {
            Write-Verbose "Credential Cache Hit: $CredentialName"
            return $global:O365TenantAdminCredentialCache[$CredentialName]
        }
    }
    Write-Verbose "Credential Cache Miss: $CredentialName"
    return $null
}

function Add-CredentialToCredentialCache
{
    [cmdletbinding()]
    param([System.Management.Automation.PSCredential]$Credential)

    if(-not (Get-Variable CredentialCache -Scope Global -ErrorAction SilentlyContinue))
    {
        Write-Verbose "Initializing the Credential Cache"
        $global:O365TenantAdminCredentialCache = @{}
    }

    Write-Verbose "Adding Credential to the Credential Cache"
    $global:O365TenantAdminCredentialCache[$Credential.UserName] = $Credential
}

# load the required assemblies and Windows PowerShell modules

    if(-not ((Load-SharePointOnlineClientComponentAssemblies) -and (Load-SharePointOnlineModule)) ) { return }

# Add the credentials to the client context and SharePoint service connection

    # check for cached credentials to use
    $o365TenantAdminCredential = Get-CredentialFromCredentialCache -CredentialName $tenantAdmin

    if(-not $o365TenantAdminCredential)
    {
        # when credentials are not cached, prompt for the tenant admin credentials
        $o365TenantAdminCredential = Get-Credential -UserName $tenantAdmin -Message "Enter the password for the Office 365 admin"

        if(-not $o365TenantAdminCredential -or -not $o365TenantAdminCredential.UserName -or $o365TenantAdminCredential.Password.Length -eq 0 )
        {
            Write-Error -Message "Could not validate the supplied tenant admin credentials"
            return
        }

        # add the credentials to the cache
        Add-CredentialToCredentialCache -Credential $o365TenantAdminCredential
    }

# establish the client context and set the credentials to connect to the site

    $clientContext = New-Object Microsoft.SharePoint.Client.ClientContext($sharepointAdminCenterUrl)
    $clientContext.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($o365TenantAdminCredential.UserName, $o365TenantAdminCredential.Password)

# run a query against the Microsoft 365 tenant search service to retrieve all OneDrive URLs

    do
    {
        # build the query object
	    $query = New-Object Microsoft.SharePoint.Client.Search.Query.KeywordQuery($clientContext)
	    $query.TrimDuplicates        = $false
	    $query.RowLimit              = 500
	    $query.QueryText             = "SPSiteUrl:'/personal/' AND contentclass:STS_Site"
	    $query.StartRow              = $resultsProcessed
	    $query.TotalRowsExactMinimum = 500000

        # run the query
	    $searchExecutor = New-Object Microsoft.SharePoint.Client.Search.Query.SearchExecutor($clientContext)
	    $queryResults = $searchExecutor.ExecuteQuery($query)
	    $clientContext.ExecuteQuery()

        # enumerate the search results and store the site URLs
        $queryResults.Value[0].ResultRows | % {
            $oneDriveForBusinessSiteUrls += $_.Path
            $resultsProcessed++
        }
    }
    while($resultsProcessed -lt $queryResults.Value.TotalRows)

$oneDriveForBusinessSiteUrls | Out-File -FilePath $reportName

Script to disable IRM for OneDrive

Use the following sample script if you need to disable IRM for users' OneDrive.

This script also requires the SharePoint Client Components SDK and the SharePoint Management Shell. Copy and paste the contents, save the file locally (for example, "Disable-IRMOnOneDriveForBusiness.ps1"), and modify the $sharepointAdminCenterUrl and $tenantAdmin values. Manually specify the OneDrive URLs or use the script in the previous section so that you can import these, and then run the script.

**Disclaimer**: This sample script isn't supported under any Microsoft standard support program or service. This sample script is provided AS IS without warranty of any kind.

# Requires Windows PowerShell version 3

<#
  Description:

    Disables IRM for OneDrive and can also be used for SharePoint libraries and lists

 Script Installation Requirements:

   SharePoint Client Components SDK
   https://www.microsoft.com/download/details.aspx?id=42038

   SharePoint Management Shell
   https://www.microsoft.com/download/details.aspx?id=35588

======
#>

$sharepointAdminCenterUrl = "https://contoso-admin.sharepoint.com"

$tenantAdmin = "admin@contoso.com"

$webUrls = @("https://contoso-my.sharepoint.com/personal/user1_contoso_com",
             "https://contoso-my.sharepoint.com/personal/user2_contoso_com",
             "https://contoso-my.sharepoint.com/personal/person3_contoso_com")

<# As an alternative to specifying the URLs as an array, you can import them from a CSV file (no header, single value per row).
   Then, use: $webUrls = Get-Content -Path "File_path_and_name.csv"

#>

$listTitle = "Documents"

function Load-SharePointOnlineClientComponentAssemblies
{
    [cmdletbinding()]
    param()

    process
    {
        # assembly location: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\16\ISAPI
        try
        {
            Write-Verbose "Loading Assembly: Microsoft.Office.Client.Policy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.Office.Client.Policy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.Office.Client.TranslationServices, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.Office.Client.TranslationServices, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.DocumentManagement, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.DocumentManagement, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Publishing, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Publishing, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Runtime, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Runtime, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Search.Applications, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Search.Applications, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Search, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Search, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.Taxonomy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.Taxonomy, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            Write-Verbose "Loading Assembly: Microsoft.SharePoint.Client.UserProfiles, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
            [System.Reflection.Assembly]::Load("Microsoft.SharePoint.Client.UserProfiles, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c") | Out-Null

            return $true
        }
        catch
        {
            if($_.Exception.Message -match "Could not load file or assembly")
            {
                Write-Error -Message "Unable to load the SharePoint Server 2013 Client Components.`nDownload Location: https://www.microsoft.com/download/details.aspx?id=42038"
            }
            else
            {
                Write-Error -Exception $_.Exception
            }
            return $false
        }
    }
}

function Load-SharePointOnlineModule
{
    [cmdletbinding()]
    param()

    process
    {
        do
        {
            # Installation location: C:\Program Files\SharePoint Online Management Shell\Microsoft.Online.SharePoint.PowerShell
            $spoModule = Get-Module -Name Microsoft.Online.SharePoint.PowerShell -ErrorAction SilentlyContinue

            if(-not $spoModule)
            {
                try
                {
                    Import-Module Microsoft.Online.SharePoint.PowerShell -DisableNameChecking
                    return $true
                }
                catch
                {
                    if($_.Exception.Message -match "Could not load file or assembly")
                    {
                        Write-Error -Message "Unable to load the SharePoint Online Management Shell.`nDownload Location: https://www.microsoft.com/download/details.aspx?id=35588"
                    }
                    else
                    {
                        Write-Error -Exception $_.Exception
                    }
                    return $false
                }
            }
            else
            {
                return $true
            }
        }
        while(-not $spoModule)
    }
}

function Remove-IrmConfiguration
{
    [cmdletbinding()]
    param(
        [parameter(Mandatory=$true)][Microsoft.SharePoint.Client.List]$List
    )

    process
    {
        Write-Verbose "Disabling IRM Configuration on '$($List.Title)'"

        $List.IrmEnabled = $false
        $List.IrmExpire  = $false
        $List.IrmReject  = $false
        $List.InformationRightsManagementSettings.Reset()
    }
    end
    {
        if($List)
        {
            Write-Verbose "Committing IRM configuration settings on '$($list.Title)'"
            $list.InformationRightsManagementSettings.Update()
            $list.Update()
            $script:clientContext.Load($list)
            $script:clientContext.ExecuteQuery()
        }
    }
}

function Get-CredentialFromCredentialCache
{
    [cmdletbinding()]
    param([string]$CredentialName)

    #if( Test-Path variable:\global:CredentialCache )
    if( Get-Variable O365TenantAdminCredentialCache -Scope Global -ErrorAction SilentlyContinue )
    {
        if($global:O365TenantAdminCredentialCache.ContainsKey($CredentialName))
        {
            Write-Verbose "Credential Cache Hit: $CredentialName"
            return $global:O365TenantAdminCredentialCache[$CredentialName]
        }
    }
    Write-Verbose "Credential Cache Miss: $CredentialName"
    return $null
}

function Add-CredentialToCredentialCache
{
    [cmdletbinding()]
    param([System.Management.Automation.PSCredential]$Credential)

    if(-not (Get-Variable CredentialCache -Scope Global -ErrorAction SilentlyContinue))
    {
        Write-Verbose "Initializing the Credential Cache"
        $global:O365TenantAdminCredentialCache = @{}
    }

    Write-Verbose "Adding Credential to the Credential Cache"
    $global:O365TenantAdminCredentialCache[$Credential.UserName] = $Credential
}

# load the required assemblies and Windows PowerShell modules

    if(-not ((Load-SharePointOnlineClientComponentAssemblies) -and (Load-SharePointOnlineModule)) ) { return }

# Add the credentials to the client context and SharePoint service connection

    # check for cached credentials to use
    $o365TenantAdminCredential = Get-CredentialFromCredentialCache -CredentialName $tenantAdmin

    if(-not $o365TenantAdminCredential)
    {
        # when credentials are not cached, prompt for the tenant admin credentials
        $o365TenantAdminCredential = Get-Credential -UserName $tenantAdmin -Message "Enter the password for the Office 365 admin"

        if(-not $o365TenantAdminCredential -or -not $o365TenantAdminCredential.UserName -or $o365TenantAdminCredential.Password.Length -eq 0 )
        {
            Write-Error -Message "Could not validate the supplied tenant admin credentials"
            return
        }

        # add the credentials to the cache
        Add-CredentialToCredentialCache -Credential $o365TenantAdminCredential
    }

# connect to Office365 first, required for SharePoint cmdlets to run

    Connect-SPOService -Url $sharepointAdminCenterUrl -Credential $o365TenantAdminCredential

# enumerate each of the specified site URLs

    foreach($webUrl in $webUrls)
    {
        $grantedSiteCollectionAdmin = $false

        try
        {
            # establish the client context and set the credentials to connect to the site
            $script:clientContext = New-Object Microsoft.SharePoint.Client.ClientContext($webUrl)
            $script:clientContext.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($o365TenantAdminCredential.UserName, $o365TenantAdminCredential.Password)

            # initialize the site and web context
            $script:clientContext.Load($script:clientContext.Site)
            $script:clientContext.Load($script:clientContext.Web)
            $script:clientContext.ExecuteQuery()

            # load and ensure the tenant admin user account if present on the target SharePoint site
            $tenantAdminUser = $script:clientContext.Web.EnsureUser($o365TenantAdminCredential.UserName)
            $script:clientContext.Load($tenantAdminUser)
            $script:clientContext.ExecuteQuery()

            # check if the tenant admin is a site admin
            if( -not $tenantAdminUser.IsSiteAdmin )
            {
                try
                {
                    # grant the tenant admin temporary admin rights to the site collection
                    Set-SPOUser -Site $script:clientContext.Site.Url -LoginName $o365TenantAdminCredential.UserName -IsSiteCollectionAdmin $true | Out-Null
                    $grantedSiteCollectionAdmin = $true
                }
                catch
                {
                    Write-Error $_.Exception
                    return
                }
            }

            try
            {
                # load the list orlibrary using CSOM

                $list = $null
                $list = $script:clientContext.Web.Lists.GetByTitle($listTitle)
                $script:clientContext.Load($list)
                $script:clientContext.ExecuteQuery()

               Remove-IrmConfiguration -List $list
            }
            catch
            {
                Write-Error -Message "Error setting IRM configuration on site: $webUrl.`nError Details: $($_.Exception.ToString())"
            }
       }
       finally
       {
            if($grantedSiteCollectionAdmin)
            {
                # remove the temporary admin rights to the site collection
                Set-SPOUser -Site $script:clientContext.Site.Url -LoginName $o365TenantAdminCredential.UserName -IsSiteCollectionAdmin $false | Out-Null
            }
       }
    }

Disconnect-SPOService -ErrorAction SilentlyContinue

Deli z drugimi prek

Microsoft 365: Configuration for online services to use the Azure Rights Management service

Exchange Online: IRM Configuration

SharePoint in Microsoft 365 and OneDrive: IRM Configuration

Configuring IRM for libraries and lists

Configuring IRM for OneDrive

Configuration for users

Configuration for administrators

Additional script to output all OneDrive URLs to a .CSV file

Script to disable IRM for OneDrive

Povratne informacije

Dodatni viri