Track database activity with Audit Logs in Azure Database for MySQL - Flexible Server
APPLIES TO:
Azure Database for MySQL - Flexible Server
Azure Database for MySQL flexible server provides users with the ability to configure audit logs. Audit logs can be used to track database-level activity including connection, admin, DDL, and DML events. These types of logs are commonly used for compliance purposes.
Configure audit logging
Important
It is recommended to only log the event types and users required for your auditing purposes to ensure your server's performance isn't heavily impacted and a minimum amount of data is collected.
By default, audit logs are disabled. To enable them, set the audit_log_enabled
server parameter to ON. This can be configured using the Azure portal or Azure CLI.
Other parameters you can adjust to control audit logging behavior include:
audit_log_events
: controls the events to be logged. See below table for specific audit events.audit_log_include_users
: MySQL users to be included for logging. The default value for this parameter is empty, which will include all the users for logging. This has higher priority overaudit_log_exclude_users
. Max length of the parameter is 512 characters. For example, wildcard value ofdev*
includes all the users with entries starting with keyworddev
like "dev1,dev_user,dev_2". Another example for wildcard entry for including user is*dev
in this example, all users ending with value "dev" like "stage_dev,prod_dev,user_dev" are included in the audit log entries. Additionally, the use of a question mark(?)
as a wildcard character is permitted in patterns.audit_log_exclude_users
: MySQL users to be excluded from logging. The Max length of the parameter is 512 characters. Wildcard entries for user are also accepted to exclude users in audit logs. For example, wildcard value ofstage*
excludes all the users with entries starting with keywordstage
like "stage1,stage_user,stage_2". Another example for wildcard entry for excluding user is*com
in this example, all users ending with valuecom
will be excluded from the audit log entries. Additionally, the use of a question mark(?)
as a wildcard character is permitted in patterns.
Note
audit_log_include_users
has higher priority over audit_log_exclude_users
. For example, if audit_log_include_users
= demouser
and audit_log_exclude_users
= demouser
, the user will be included in the audit logs because audit_log_include_users
has higher priority.
Event | Description |
---|---|
CONNECTION |
- Connection initiation - Connection termination |
CONNECTION_V2 |
- Connection initiation (successful or unsuccessful attempt error code) - Connection termination |
DML_SELECT |
SELECT queries |
DML_NONSELECT |
INSERT/DELETE/UPDATE queries |
DML |
DML = DML_SELECT + DML_NONSELECT |
DDL |
Queries like "DROP DATABASE" |
DCL |
Queries like "GRANT PERMISSION" |
ADMIN |
Queries like "SHOW STATUS" |
GENERAL |
All in DML_SELECT, DML_NONSELECT, DML, DDL, DCL, and ADMIN |
TABLE_ACCESS |
- Table read statements, such as SELECT or INSERT INTO ... SELECT - Table delete statements, such as DELETE or TRUNCATE TABLE - Table insert statements, such as INSERT or REPLACE - Table update statements, such as UPDATE |
Access audit logs
Audit logs are integrated with Azure Monitor diagnostic settings. Once you've enabled audit logs on your flexible server, you can emit them to Azure Monitor logs, Azure Event Hubs, or Azure Storage. To learn more about diagnostic settings, see the diagnostic logs documentation. To learn more about how to enable diagnostic settings in the Azure portal, see the audit log portal article.
Note
Premium Storage accounts aren't supported if you send the logs to Azure storage via diagnostics and settings.
The following sections describe the output of MySQL audit logs based on the event type. Depending on the output method, the fields included and the order in which they appear may vary.
Connection
Property | Description |
---|---|
TenantId |
Your tenant ID |
SourceSystem |
Azure |
TimeGenerated [UTC] |
Time stamp when the log was recorded in UTC |
Type |
Type of the log. Always AzureDiagnostics |
SubscriptionId |
GUID for the subscription that the server belongs to |
ResourceGroup |
Name of the resource group the server belongs to |
ResourceProvider |
Name of the resource provider. Always MICROSOFT.DBFORMYSQL |
ResourceType |
Servers |
ResourceId |
Resource URI |
Resource |
Name of the server in upper case |
Category |
MySqlAuditLogs |
OperationName |
LogEvent |
LogicalServerName_s |
Name of the server |
event_class_s |
connection_log |
event_subclass_s |
CONNECT , DISCONNECT , CHANGE USER |
connection_id_d |
Unique connection ID generated by MySQL |
host_s |
Blank |
ip_s |
IP address of client connecting to MySQL |
user_s |
Name of user executing the query |
db_s |
Name of database connected to |
\_ResourceId |
Resource URI |
status_d |
Connection Error code entry for CONNECTIONS_V2 event. |
General
Schema below applies to GENERAL, DML_SELECT, DML_NONSELECT, DML, DDL, DCL, and ADMIN event types.
Note
For sql_text_s
, log will be truncated if it exceeds 2048 characters.
Property | Description |
---|---|
TenantId |
Your tenant ID |
SourceSystem |
Azure |
TimeGenerated [UTC] |
Time stamp when the log was recorded in UTC |
Type |
Type of the log. Always AzureDiagnostics |
SubscriptionId |
GUID for the subscription that the server belongs to |
ResourceGroup |
Name of the resource group the server belongs to |
ResourceProvider |
Name of the resource provider. Always MICROSOFT.DBFORMYSQL |
ResourceType |
Servers |
ResourceId |
Resource URI |
Resource |
Name of the server in upper case |
Category |
MySqlAuditLogs |
OperationName |
LogEvent |
LogicalServerName_s |
Name of the server |
event_class_s |
general_log |
event_subclass_s |
LOG , ERROR , RESULT (only available for MySQL 5.6) |
event_time |
Query start time in UTC timestamp |
error_code_d |
Error code if query failed. 0 means no error |
thread_id_d |
ID of thread that executed the query |
host_s |
Blank |
ip_s |
IP address of client connecting to MySQL |
user_s |
Name of user executing the query |
sql_text_s |
Full query text |
\_ResourceId |
Resource URI |
Table access
Note
For sql_text_s
, log will be truncated if it exceeds 2048 characters.
Property | Description |
---|---|
TenantId |
Your tenant ID |
SourceSystem |
Azure |
TimeGenerated [UTC] |
Time stamp when the log was recorded in UTC |
Type |
Type of the log. Always AzureDiagnostics |
SubscriptionId |
GUID for the subscription that the server belongs to |
ResourceGroup |
Name of the resource group the server belongs to |
ResourceProvider |
Name of the resource provider. Always MICROSOFT.DBFORMYSQL |
ResourceType |
Servers |
ResourceId |
Resource URI |
Resource |
Name of the server in upper case |
Category |
MySqlAuditLogs |
OperationName |
LogEvent |
LogicalServerName_s |
Name of the server |
event_class_s |
table_access_log |
event_subclass_s |
READ , INSERT , UPDATE , or DELETE |
connection_id_d |
Unique connection ID generated by MySQL |
db_s |
Name of database accessed |
table_s |
Name of table accessed |
sql_text_s |
Full query text |
\_ResourceId |
Resource URI |
Analyze logs in Azure Monitor Logs
Once your audit logs are piped to Azure Monitor Logs through Diagnostic Logs, you can perform further analysis of your audited events. Below are some sample queries to help you get started. Make sure to update the below with your server name.
List GENERAL events on a particular server
AzureDiagnostics | where Resource == '<your server name>' //Server name must be in Upper case | where Category == 'MySqlAuditLogs' and event_class_s == "general_log" | project TimeGenerated, Resource, event_class_s, event_subclass_s, event_time_t, user_s , ip_s , sql_text_s | order by TimeGenerated asc nulls last
List CONNECTION_V2 events on a particular server,
status_d
column denotes the client connection error code faced by the client application while connecting.AzureDiagnostics | where Resource == '<your server name>' //Server name must be in Upper case | where Category == 'MySqlAuditLogs' and event_subclass_s == "CONNECT" | project TimeGenerated, Resource, event_class_s, event_subclass_s, user_s, ip_s, status_d | order by TimeGenerated asc nulls last
List CONNECTION events on a particular server
AzureDiagnostics | where Resource == '<your server name>' //Server name must be in Upper case | where Category == 'MySqlAuditLogs' and event_class_s == "connection_log" | project TimeGenerated, Resource, event_class_s, event_subclass_s, event_time_t, user_s , ip_s , sql_text_s | order by TimeGenerated asc nulls last
Summarize audited events on a particular server
AzureDiagnostics | where Resource == '<your server name>' //Server name must be in Upper case | where Category == 'MySqlAuditLogs' | project TimeGenerated, Resource, event_class_s, event_subclass_s, event_time_t, user_s , ip_s , sql_text_s | summarize count() by event_class_s, event_subclass_s, user_s, ip_s
Graph the audit event type distribution on a particular server
AzureDiagnostics | where Resource == '<your server name>' //Server name must be in Upper case | where Category == 'MySqlAuditLogs' | project TimeGenerated, Resource, event_class_s, event_subclass_s, event_time_t, user_s , ip_s , sql_text_s | summarize count() by Resource, bin(TimeGenerated, 5m) | render timechart
List audited events across all Azure Database for MySQL flexible server instances with Diagnostic Logs enabled for audit logs
AzureDiagnostics | where Category == 'MySqlAuditLogs' | project TimeGenerated, Resource, event_class_s, event_subclass_s, event_time_t, user_s , ip_s , sql_text_s | order by TimeGenerated asc nulls last
Next steps
- Learn more about slow query logs
- Configure auditing