HB-series VMs are optimized for applications that are driven by memory bandwidth, such as fluid dynamics, explicit finite element analysis, and weather modeling. HB VMs feature 60 AMD EPYC 7551 processor cores, 4 GB of RAM per CPU core, and no simultaneous multithreading. An HB VM provides up to 260 GB/sec of memory bandwidth. HB-series VMs feature 100 Gb/sec Mellanox EDR InfiniBand. These VMs are connected in a non-blocking fat tree for optimized and consistent RDMA performance. These VMs support Adaptive Routing and the Dynamic Connected Transport (DCT, in addition to standard RC and UD transports). These features enhance application performance, scalability, and consistency, and their usage is recommended.
1Temp disk speed often differs between RR (Random Read) and RW (Random Write) operations. RR operations are typically faster than RW operations. The RW speed is usually slower than the RR speed on series where only the RR speed value is listed.
Storage capacity is shown in units of GiB or 1024^3 bytes. When you compare disks measured in GB (1000^3 bytes) to disks measured in GiB (1024^3) remember that capacity numbers given in GiB may appear smaller. For example, 1023 GiB = 1098.4 GB.
Disk throughput is measured in input/output operations per second (IOPS) and MBps where MBps = 10^6 bytes/sec.
1Some sizes support bursting to temporarily increase disk performance. Burst speeds can be maintained for up to 30 minutes at a time.
Storage capacity is shown in units of GiB or 1024^3 bytes. When you compare disks measured in GB (1000^3 bytes) to disks measured in GiB (1024^3) remember that capacity numbers given in GiB may appear smaller. For example, 1023 GiB = 1098.4 GB.
Disk throughput is measured in input/output operations per second (IOPS) and MBps where MBps = 10^6 bytes/sec.
Data disks can operate in cached or uncached modes. For cached data disk operation, the host cache mode is set to ReadOnly or ReadWrite. For uncached data disk operation, the host cache mode is set to None.
Expected network bandwidth is the maximum aggregated bandwidth allocated per VM type across all NICs, for all destinations. For more information, see Virtual machine network bandwidth
Upper limits aren't guaranteed. Limits offer guidance for selecting the right VM type for the intended application. Actual network performance will depend on several factors including network congestion, application loads, and network settings. For information on optimizing network throughput, see Optimize network throughput for Azure virtual machines.
To achieve the expected network performance on Linux or Windows, you may need to select a specific version or optimize your VM. For more information, see Bandwidth/Throughput testing (NTTTCP).
Accelerator (GPUs, FPGAs, etc.) info for each size