Tutorial: Migrate online from an Azure VM or an on-premises PostgreSQL server to Azure Database for PostgreSQL with the migration service Preview

Чланак
08/14/2024

APPLIES TO: Azure Database for PostgreSQL - Flexible Server

This article guides you in migrating a PostgreSQL instance from your on-premises or Azure virtual machines (VMs) to Azure Database for PostgreSQL flexible server using the Azure portal and Azure CLI.

The migration service in Azure Database for PostgreSQL is a fully managed service integrated into the Azure portal and Azure CLI. It's designed to simplify your migration journey to the Azure Database for PostgreSQL flexible server.

Configure your Azure Database for PostgreSQL Flexible Server
Configure the migration task
Monitor the migration
Check the migration when completed

Prerequisites

To begin the migration, you need the following prerequisites:

Before starting the migration with the Azure Database for PostgreSQL migration service, it is important to fulfill the following prerequisites, specifically designed for online migration scenarios.

Verify the source version
Install test_decoding - Source Setup
Configure target setup
Enable CDC as a source
Configure network setup
Enable extensions
Check server parameters
Check users and roles

Verify the source version

The source PostgreSQL server version must be 9.5 or later.

If the source PostgreSQL version is less than 9.5, upgrade it to 9.5 or higher before you start the migration.

Install test_decoding - Source Setup

test_decoding receives WAL through the logical decoding mechanism and decodes it into text representations of the operations performed.
For more information about the test-decoding plugin, see the PostgreSQL documentation

Configure target setup

Before migrating, Azure Database for PostgreSQL – Flexible server must be created.
SKU provisioned for Azure Database for PostgreSQL – Flexible server should match with the source.
To create a new Azure Database for PostgreSQL, visit Create an Azure Database for PostgreSQL

Enable CDC as a source

test_decoding logical decoding plugin captures the changed records from the source.
In the source PostgreSQL instance, set the following parameters and values in the postgresql.conf configuration file:
- Set wal_level = logical
- Set max_replication_slots to a value greater than 1, the value should be greater than the number of databases selected for migration.
- Set max_wal_senders to a value greater than 1, should be set to at least the same as max_replication_slots, plus the number of senders already used by your instance.
- The wal_sender_timeout parameter ends replication connections that are inactive longer than the specified number of milliseconds. The default for an on-premises PostgreSQL database is 60000 milliseconds (60 seconds). Setting the value to 0 (zero) disables the timeout mechanism and is a valid setting for migration.

To prevent the Online migration from running out of space, ensure that you have sufficient tablespace space using a provisioned managed disk. To achieve this, disable the server parameter azure.enable_temp_tablespaces_on_local_ssd on the Flexible Server for the duration of the migration, and restore it to the original state after the migration.

Configure network setup

Network setup is crucial for the migration service to function correctly. Ensure that the source PostgreSQL server can communicate with the target Azure Database for PostgreSQL server. The following network configurations are essential for a successful migration.

For information about network setup, visit Network guide for migration service.

Additional networking considerations:

pg_hba.conf Configuration: To facilitate connectivity between the source and target PostgreSQL instances, it's essential to verify and potentially modify the pg_hba.conf file. This file includes client authentication and must be configured to allow the target PostgreSQL to connect to the source. Changes to the pg_hba.conf file typically require a restart of the source PostgreSQL instance to take effect.

The pg_hba.conf file is located in the data directory of the PostgreSQL installation. This file should be checked and configured if the source database is an on-premises PostgreSQL server or a PostgreSQL server hosted on an Azure VM.

Enable extensions

To ensure a successful migration by using the migration service in Azure Database for PostgreSQL, you might need to verify extensions to your source PostgreSQL instance. Extensions provide functionality and features that might be required for your application. Make sure that you verify the extensions on the source PostgreSQL instance before you initiate the migration process.

In the target instance of Azure Database for PostgreSQL - Flexible Server, enable supported extensions that are identified in the source PostgreSQL instance.

For more information, see Extensions in Azure Database for PostgreSQL.

Note

A restart is required when you make any changes to the shared_preload_libraries parameter.

Check server parameters

You need to manually configure the server parameter values in the Azure Database for PostgreSQL – Flexible server based on the server parameter values configured in the source.

Check users and roles

The users and different roles must be migrated manually to the Azure Database for PostgreSQL – Flexible server. For migrating users and roles, you can use pg_dumpall --globals-only -U <<username> -f <<filename>>.sql.
Azure Database for PostgreSQL – The flexible server doesn't support any superuser; users having roles of superuser need to be removed before migration.

Perform the migration

You can migrate by using the Azure portal or the Azure CLI.

Portal
CLI

This article guides you using the Azure portal to migrate your PostgreSQL database from an Azure VM or an on-premises PostgreSQL server to an Azure Database for PostgreSQL. The Azure portal allows you to perform various tasks, including database migration. Following the steps outlined in this tutorial, you can seamlessly transfer your database to Azure and take advantage of its powerful features and scalability.

Configure the migration task

The migration service comes with a simple, wizard-based experience on the Azure portal. Here's how to start:

Open your web browser and go to the portal. Enter your credentials to sign in. The default view is your service dashboard.
Go to your Azure Database for PostgreSQL Flexible Server target.
In the Flexible Server's Overview tab, on the left menu, scroll down to Migration and select it.
Select the Create button to migrate from an Azure virtual machine (VM) or an on-premises PostgreSQL server to the Flexible Server. If this is your first time using the migration service, an empty grid appears with a prompt to begin your first migration.

If you've already created migrations to your Flexible Server target, the grid contains information about attempted migrations.
Select the Create button. Then, you go through a wizard-based series of tabs to create a migration into this Flexible Server target from the PostgreSQL source Server.

Setup

The first tab is the setup tab, where the user initiates the migrations by providing migration details like migration name and source type.

Screenshot of Setup migration.

Migration name is the unique identifier for each migration to this Flexible Server target. This field accepts only alphanumeric characters and doesn't accept any special characters except a hyphen (-). The name can't start with a hyphen and should be unique for a target server. No two migrations to the same Flexible Server target can have the same name.
Source Server Type — Depending on your PostgreSQL source, you can select Azure VM or on-premises.
Migration Option allows you to perform validations before triggering a migration. You can pick any of the following options:
- Validate - Checks your server and database readiness for migration to the target.
- Migrate - Skips validations and starts migrations.
- Validate and Migrate—Performs validation before triggering a migration. The migration is triggered only if there are no validation failures.

Choosing the Validate or Validate and Migrate option is always a good practice when performing premigration validations before running the migration. To learn more about the premigration validation, refer to this documentation.

Migration mode allows you to choose the mode for the migration. Offline is the default option.

Select the Next: Connect to source button.

Runtime Server

The Migration Runtime Server is a specialized feature within the migration service in Azure Database for PostgreSQL, designed to act as an intermediary server during migration. It's a separate Azure Database for PostgreSQL - Flexible Server instance that isn't the target server but is used to facilitate the migration of databases from a source environment that is only accessible via a private network.

Screenshot of the migration Runtime Server page.

For more information about the Runtime Server, visit the Migration Runtime Server.

Connect to source

The Connect to Source tab prompts you to give details related to the source selected in the Setup Tab that is the source of the databases.

Screenshot of Connectsourcemigration.

Server Name - Provide the Hostname or the IP address of the source PostgreSQL instance
Port - Port number of the Source server
Server admin login name - Username of the source PostgreSQL server
Password - Password of the source PostgreSQL server
SSL Mode - Supported values are preferred and required. When the SSL at the source PostgreSQL server is OFF, use the SSLMODE=prefer. If the SSL at the source server is ON, use the SSLMODE=require. SSL values can be determined in postgresql.conf file.
Test Connection - Performs the connectivity test between target and source. Once the connection is successful, users can proceed with the next step. Otherwise, you need to identify the networking issues between the target and source and verify the username/password for the source. Test connection takes a few minutes to establish a connection between the target and source

After the successful test connection, select the Next: Select Migration target

Select migration target

The select migration target tab displays metadata for the Flexible Server target, such as the subscription name, resource group, server name, location, and PostgreSQL version.

Screenshot of Connecttargetmigration.

Admin username - Admin username of the target PostgreSQL server
Password - Password of the target PostgreSQL server
Custom FQDN/IP (Optional): The custom FQDN/IP field is optional and can be used when the target is behind a custom DNS server or has custom DNS namespaces, making it accessible only via specific FQDNs or IP addresses. For example, this could include entries like flexibleserver.example.com, 198.1.0.2, or a PostgreSQL FQDN such as flexibleserver.postgres.database.azure.com, if the custom DNS server contains the DNS zone postgres.database.azure.com or forwards queries for this zone to 168.63.129.16, where the FQDN is resolved in the Azure public or private DNS zone.
Test Connection - Performs the connectivity test between target and source. Once the connection is successful, users can proceed with the next step. Otherwise, we need to identify the networking issues between the target and the source and verify the username/password for the target. The test connection takes a few minutes to establish a connection between the target and the source.

After the successful test connection, select the Next: Select Database(s) for Migration

Select databases for migration

Under this tab, a list of user databases is inside the source server selected in the setup tab. You can select and migrate up to eight databases in a single migration attempt. If there are more than eight user databases, the migration process is repeated between the source and target servers for the next set of databases.

Screenshot of FetchDBmigration.

After selecting the databases, select the Next: Summary

Summary

The Summary tab summarizes all the source and target details for creating the validation or migration. Review the details and select the start button.

Screenshot of Summary migration.

Monitor the migration

After you select the start button, a notification appears in a few seconds, saying that the validation or migration creation is successful. You're redirected automatically to the Migration blade of Flexible Server, which has a new entry for the recently created validation or migration.

Screenshot of monitor migration in the Azure portal.

The grid that displays the migrations has these columns: Name, Status, Migration mode, Migration type, Source server, Source server type, Databases, **Duration, and Start time. The entries are displayed in the descending order of the start time, with the most recent entry at the top. You can use the refresh button to refresh the status of the validation or migration. Select the migration name in the grid to see the associated details.

When the validation or migration is created, it moves to the InProgress state and PerformingPreRequisiteSteps substate. The workflow takes 2 to 3 minutes to set up the migration infrastructure and network connections.

Migration details

In the Setup tab, we have selected the migration option as Migrate and Validate. In this scenario, validations are performed first before migration starts. After the PerformingPreRequisiteSteps substate is completed, the workflow moves into the substate of Validation in Progress.

If validation has errors, the migration moves into a Failed state.
If validation completes without error, the migration starts, and the workflow moves into the substate of Migrating Data.

The validation results are displayed under the Validation tab, and the migration is monitored under the Migration tab.

Screenshot of Details migration.

Some possible migration states:

Migration states

State	Description
InProgress	The migration infrastructure setup is underway, or the actual data migration is in progress.
Canceled	The migration is canceled or deleted.
Failed	The migration has failed.
Validation Failed	The validation has failed.
Succeeded	The migration has succeeded and is complete.
WaitingForUserAction	Applicable only for online migration. Waiting for user action to perform cutover.

Migration substates

Substate	Description
PerformingPreRequisiteSteps	Infrastructure setup is underway for data migration.
Validation in Progress	Validation is in progress.
MigratingData	Data migration is in progress.
CompletingMigration	Migration is in the final stages of completion.
Completed	Migration has been completed.
Failed	Migration has failed.

Validation substates

Substate	Description
Failed	Validation has failed.
Succeeded	Validation is successful.
Warning	Validation is in warning.

Cutover

If there are both Migrate and Validate and Migrate, completing the online migration requires another step—the user must take a Cutover action. After the copy/clone of the base data is complete, the migration moves to the WaitingForUserAction state and the WaitingForCutoverTrigger substrate. In this state, the user can trigger the cutover from the portal by selecting the migration.

Before initiating cutover, it's important to ensure that:

Writes to the source are stopped - Latency value is 0 or close to 0. The Latency information can be obtained from the migration details screen as shown below:
latency value decreases to 0 or close to 0
The latency value indicates when the target last synced with the source. Writing to the source can be stopped at this point, and a cutover can be initiated. In case there's heavy traffic at the source, it's recommended to stop writes first so that Latency can come close to 0, and then a cutover is initiated.

The Cutover operation applies all pending changes from the Source to the Target and completes the migration. If you trigger a "Cutover" even with nonzero Latency, the replication stops until that point in time. All the data on the source until the cutover point is then applied to the target. If you experience a latency of 15 minutes at the cutover point, all the changed data in the last 15 minutes are applied to the target. The time depends on the backlog of changes occurring in the last 15 minutes. Hence, it's recommended that the latency go to zero or near zero before triggering the cutover.

The migration moves to the Succeeded state when the Migrating Data substate or the cutover (in Online migration) finishes successfully. If there's a problem at the Migrating Data substate, the migration moves into a Failed state.

Cancel the migration

You can cancel any ongoing validations or migrations. The workflow must be in the InProgress state to be canceled. You can't cancel a validation or migration in the Succeeded or Failed state.

Canceling a validation stops any further validation activity and the validation moves to a Canceled state.

Canceling a migration stops further migration activity on your target server and moves to a Canceled state. It doesn't drop or roll back any changes on your target server. Be sure to drop the databases on your target server that is involved in a canceled migration.

This article explores using the Azure CLI to migrate your PostgreSQL database from an Azure virtual machine or an on-premises PostgreSQL instance to an Azure Database for PostgreSQL. The Azure CLI provides a powerful and flexible command-line interface that allows you to perform various tasks, including database migration. Following the steps outlined in this article, you can seamlessly transfer your database to Azure and take advantage of its powerful features and scalability.

To learn more about Azure CLI with the migration service, visit How to set up Azure CLI for the migration service.

Once the CLI is installed, open the command prompt and log into your Azure account using the below command.

az login

Configure the migration task

To begin the migration, create a JSON file with the migration details. The JSON file contains the following information:

Edit the below placeholders << >> in the JSON lines and store them in the local machine as <<filename>>.json where the CLI is being invoked. In this tutorial, we have saved the file in C:\migration-CLI\migration_body.json

{
"properties": {
"SourceDBServerResourceId": "<<source hostname or IP address>>:<<port>>@<<username>>",
        "SecretParameters": {
            "AdminCredentials": {
                "SourceServerPassword": "<<Source Password>>",
                "TargetServerPassword": "<<Target Password>>"
            },
			"targetServerUserName": "<<Target username>>"
        },
        "DBsToMigrate": "<<comma separated list of databases in a array like - ["ticketdb","timedb","inventorydb"]>>",
        "OverwriteDBsInTarget": "true",
        "sourceType": "OnPremises",
        "sslMode": "Prefer"
    }
}

Note

When configuring the JSON properties for the migration to Azure Database for PostgreSQL Flexible Server, if your source environment is an Azure Virtual Machine, you can specify the source type using the "sourceType":"AzureVM" property. This helps the migration service understand the environment from which the data is being migrated.

Run the following command to check if any migrations are running. The migration name is unique across the migrations within the Azure Database for PostgreSQL flexible server target.
```
az postgres flexible-server migration list --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --filter All
```

In the above steps, there are no migrations performed so we start with the new migration by running the following command

az postgres flexible-server migration create --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1 --migration-mode online --migration-option ValidateAndMigrate --properties "C:\migration-cli\migration_body.json"

Run the following command to initiate the migration status in the previous step. You can check the status of the migration by providing the migration name

az postgres flexible-server migration show --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1

The status of the migration progress is shown in the Azure CLI.
You can also see the status of the Azure Database for PostgreSQL flexible server in the Azure portal.
You can cancel any ongoing migration attempts using the cancel command. This command stops the particular migration attempt and rolls back all changes on your target server. Here's the CLI command to delete a migration:
```
az postgres flexible-server migration update cancel --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1
```

Cutover

After the base data migration is complete in online migrations, the migration task moves to the WaitingForCutoverTrigger substate. In this state, the user can trigger the cutover through the CLI using the command below. The cutover can also be triggered from the portal by selecting the migration name in the migration grid.

You can also initiate the cutover from the Azure portal.

az postgres flexible-server migration update --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1 --cutover

Check the migration when complete

After completing the databases, you need to manually validate the data between source and target and verify that all the objects in the target database are successfully created.

After migration, you can perform the following tasks:

Verify the data on your flexible server and ensure it's an exact copy of the source instance.
Post verification, enable the high availability option on your flexible server as needed.
Change the SKU of the flexible server to match the application needs. This change needs a database server restart.
If you change any server parameters from their default values in the source instance, copy those server parameter values in the flexible server. Copy other server settings, such as tags, alerts, and firewall rules (if applicable), from the source instance to the flexible server.
Make changes to your application to point the connection strings to a flexible server.
Monitor the database performance closely to see if it requires performance tuning.

Делите путем

Tutorial: Migrate online from an Azure VM or an on-premises PostgreSQL server to Azure Database for PostgreSQL with the migration service Preview

Prerequisites

Verify the source version

Install test_decoding - Source Setup

Configure target setup

Enable CDC as a source

Configure network setup

Enable extensions

Check server parameters

Check users and roles

Perform the migration

Configure the migration task

Setup

Runtime Server

Connect to source

Select migration target

Select databases for migration

Summary

Monitor the migration

Migration details

Migration states

Migration substates

Validation substates

Cutover

Cancel the migration

Configure the migration task

Cutover

Check the migration when complete

Повратне информације

Додатни ресурси

Делите путем

Tutorial: Migrate online from an Azure VM or an on-premises PostgreSQL server to Azure Database for PostgreSQL with the migration service Preview

Prerequisites

Verify the source version

Install test_decoding - Source Setup

Configure target setup

Enable CDC as a source

Configure network setup

Enable extensions

Check server parameters

Check users and roles

Perform the migration

Configure the migration task

Setup

Runtime Server

Connect to source

Select migration target

Select databases for migration

Summary

Monitor the migration

Migration details

Migration states

Migration substates

Validation substates

Cutover

Cancel the migration

Check the migration when complete

Related content

Повратне информације

Додатни ресурси