Create a VIS pool in Skype for Business Server
Summary: Create a Video Interop Server pool in Skype for Business Server using Topology Builder.
Create a VIS or VIS pool using Topology Builder
Open Topology Builder on the front end server. From the left pane of Topology Builder, right click on Video Interop Server Pools and choose New Video Interop Server Pool.
This will open up a Create a new Video Interop Server Pool wizard. Provide the Pool FQDN for the new Video Interop Server and select either This pool has one server or This pool has multiple servers based on your requirement, then press Next.
If you want to deploy a Video Interop Server pool to provide high availability, select This pool has multiple servers. Keep in mind with this option that:
You must deploy DNS load balancing to support Video Interop Server pools.
On the next page, for the Define the computers in this pool item, enter the Computer FQDN of each server in the pool into the text field, and then click Add. Repeat this step to add another Video Interop Server to the pool. When you have defined all the computers in the pool, press Next.
If you want to deploy only one Video Interop Server in the pool because you do not require high availability, then select This pool has one server and press Next.
Select the next hop pool/FE from the drop-down list and press Next.
Select an Edge Pool to associate with the VIS and press Finish.
Set a TCP or TLS port.
Select the newly added Video Interop Server from the left pane of Topology Builder, right click it and choose Edit Properties. Enable or Update the TCP or TLS port per your requirement and choose OK. Although by default TLS is added, only TCP has been fully tested with Cisco Unified Communications Manager (CallManager, or CUCM).
Add a video gateway. To do this, Expand Shared Components, right click on Video Gateways and select New Video Gateway.
Provide the video gateway FQDN or IP address. The video gateway could be in a subdomain or a different domain. The CUCM used by your system's VTCs serves as a video gateway.
Select either IPv4 or IPv6 as appropriate. You can use all configured IP addresses or limit service usage to selected IP addresses.
Select the listening port of the video gateway. Select the Transport protocol (TCP or TLS) and associate it with a Video Interop Server which is set up for a video SIP trunk. The Transport Protocol for the video gateway should match the Transport Protocol configured for the VIS.
A corresponding SIP Video trunk is added after the above step is completed. Right click on the SIP Video Trunk, and select the trunk that was just added. The video SIP Trunk name, associated Video Interop Server, SIP Transport protocol and port can all be changed.
Note
A Video Interop Server supports 1:N trunks. Hence multiple trunks can be added, which are associated with a single Video Interop Server, where each trunk terminates on a different Video Gateway. The limitation is that a particular Video Gateway has one and only one trunk that can be defined to the Skype for Business Server deployment.
Publish the Topology Document as described in Create and publish new topology in Skype for Business Server 2015.
Note
To improve resiliency, you may want to configure a second Video Interop Server or VIS pool, or a backup Front End pool. See Resiliency mechanisms for more information.
All tasks performed using Topology Builder should now be complete. Proceed to installing the software on the new VIS server or servers.
See also
Deploy the VIS server role in Skype for Business Server
Plan for Video Interop Server in Skype for Business Server
Create and publish new topology in Skype for Business Server 2015