Stöd för SqlClient-strömning
Stöd för direktuppspelning mellan SQL Server och ett program (nytt i .NET Framework 4.5) stöder ostrukturerade data på servern (dokument, bilder och mediefiler). En SQL Server-databas kan lagra binära stora objekt (BLOB), men om du hämtar blobbar kan du använda mycket minne.
Direktuppspelningsstöd till och från SQL Server förenklar skrivning av program som strömmar data, utan att helt behöva läsa in data i minnet, vilket resulterar i färre undantag för minnesspill.
Direktuppspelningsstöd gör det också möjligt för mellannivåprogram att skala bättre, särskilt i scenarier där affärsobjekt ansluter till SQL Azure för att skicka, hämta och manipulera stora BLOB.
Varning
Asynkrona anrop stöds inte om ett program också använder nyckelordet Context Connection niska veze.
De medlemmar som har lagts till för att stödja strömning används för att hämta data från frågor och för att skicka parametrar till frågor och lagrade procedurer. Direktuppspelningsfunktionen hanterar grundläggande OLTP- och datamigreringsscenarier och gäller för lokala och lokala datamigreringsmiljöer.
Direktuppspelningsstöd från SQL Server
Direktuppspelningsstöd från SQL Server introducerar nya funktioner i klasserna DbDataReader och SqlDataReader för att hämta Stream, XmlReaderoch TextReader objekt och reagera på dem. Dessa klasser används för att hämta data från frågor. Därför hanterar direktuppspelningsstöd från SQL Server OLTP-scenarier och gäller för lokala och lokala miljöer.
Följande medlemmar har lagts till för att SqlDataReader aktivera direktuppspelningsstöd från SQL Server:
Följande medlemmar har lagts till för att DbDataReader aktivera direktuppspelningsstöd från SQL Server:
Direktuppspelningsstöd till SQL Server
Direktuppspelningsstöd till SQL Server introducerar nya funktioner i SqlParameter klassen så att XmlReaderden kan acceptera och reagera på , Streamoch TextReader objekt. SqlParameter används för att skicka parametrar till frågor och lagrade procedurer.
Om du tar bort ett SqlCommand objekt eller anropar Cancel måste alla direktuppspelningsåtgärder avbrytas. Om ett program skickar CancellationTokengaranteras inte annullering.
Följande SqlDbType typer accepterar en Value av Stream:
- Binär
- VarBinary
Följande SqlDbType typer accepterar en Value av TextReader:
- Char
- NChar
- NVarChar
- Xml
Xml-typen SqlDbType accepterar en Value av XmlReader.
SqlValue kan acceptera värden av typen XmlReader, TextReaderoch Stream.
Objektet XmlReader, TextReaderoch Stream överförs upp till det värde som definieras av Size.
Exempel: Direktuppspelning från SQL Server
Använd följande Transact-SQL för att skapa exempeldatabasen:
CREATE DATABASE [Demo]
GO
USE [Demo]
GO
CREATE TABLE [Streams] (
[id] INT PRIMARY KEY IDENTITY(1, 1),
[textdata] NVARCHAR(MAX),
[bindata] VARBINARY(MAX),
[xmldata] XML)
GO
INSERT INTO [Streams] (textdata, bindata, xmldata) VALUES (N'This is a test', 0x48656C6C6F, N'<test>value</test>')
INSERT INTO [Streams] (textdata, bindata, xmldata) VALUES (N'Hello, World!', 0x54657374696E67, N'<test>value2</test>')
INSERT INTO [Streams] (textdata, bindata, xmldata) VALUES (N'Another row', 0x666F6F626172, N'<fff>bbb</fff><fff>bbc</fff>')
GO
Exemplet visar hur du gör följande:
- Undvik att blockera en användargränssnittstråd genom att tillhandahålla ett asynkront sätt att hämta stora filer.
- Överför en stor textfil från SQL Server i .NET Framework 4.5.
- Överför en stor XML-fil från SQL Server i .NET Framework 4.5.
- Hämta data från SQL Server.
- Överför stora filer (BLOB) från en SQL Server-databas till en annan utan att minnet börjar ta slut.
using System;
using System.Data;
using System.Data.SqlClient;
using System.IO;
using System.Threading.Tasks;
using System.Xml;
namespace StreamingFromServer {
class Program {
private const string connectionString = @"...";
static void Main(string[] args) {
CopyBinaryValueToFile().Wait();
PrintTextValues().Wait();
PrintXmlValues().Wait();
PrintXmlValuesViaNVarChar().Wait();
Console.WriteLine("Done");
}
// Retrieve a large BLOB from SQL Server in .NET Framework 4.5 using the asynchronous capability.
private static async Task CopyBinaryValueToFile() {
string filePath = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments), "binarydata.bin");
using (SqlConnection connection = new SqlConnection(connectionString)) {
await connection.OpenAsync();
using (SqlCommand command = new SqlCommand("SELECT [bindata] FROM [Streams] WHERE [id]=@id", connection)) {
command.Parameters.AddWithValue("id", 1);
// The reader needs to be executed with the SequentialAccess behavior to enable network streaming.
// Otherwise ReadAsync will buffer the entire BLOB into memory which can cause scalability issues or even OutOfMemoryExceptions.
using (SqlDataReader reader = await command.ExecuteReaderAsync(CommandBehavior.SequentialAccess)) {
if (await reader.ReadAsync()) {
if (!(await reader.IsDBNullAsync(0))) {
using (FileStream file = new FileStream(filePath, FileMode.Create, FileAccess.Write)) {
using (Stream data = reader.GetStream(0)) {
// Asynchronously copy the stream from the server to the file we just created.
await data.CopyToAsync(file);
}
}
}
}
}
}
}
}
// Transfer a large Text File from SQL Server in .NET Framework 4.5.
private static async Task PrintTextValues() {
using (SqlConnection connection = new SqlConnection(connectionString)) {
await connection.OpenAsync();
using (SqlCommand command = new SqlCommand("SELECT [id], [textdata] FROM [Streams]", connection)) {
// The reader needs to be executed with the SequentialAccess behavior to enable network streaming.
// Otherwise ReadAsync will buffer the entire text document into memory which can cause scalability issues or even OutOfMemoryExceptions.
using (SqlDataReader reader = await command.ExecuteReaderAsync(CommandBehavior.SequentialAccess)) {
while (await reader.ReadAsync()) {
Console.Write("{0}: ", reader.GetInt32(0));
if (await reader.IsDBNullAsync(1)) {
Console.Write("(NULL)");
}
else {
char[] buffer = new char[4096];
int charsRead = 0;
using (TextReader data = reader.GetTextReader(1)) {
do {
// Grab each chunk of text and write it to the console.
// If you are writing to a TextWriter, you should use WriteAsync or WriteLineAsync.
charsRead = await data.ReadAsync(buffer, 0, buffer.Length);
Console.Write(buffer, 0, charsRead);
} while (charsRead > 0);
}
}
Console.WriteLine();
}
}
}
}
}
// Transfer a large Xml Document from SQL Server in .NET Framework 4.5.
private static async Task PrintXmlValues() {
using (SqlConnection connection = new SqlConnection(connectionString)) {
await connection.OpenAsync();
using (SqlCommand command = new SqlCommand("SELECT [id], [xmldata] FROM [Streams]", connection)) {
// The reader needs to be executed with the SequentialAccess behavior to enable network streaming.
// Otherwise ReadAsync will buffer the entire Xml Document into memory which can cause scalability issues or even OutOfMemoryExceptions.
using (SqlDataReader reader = await command.ExecuteReaderAsync(CommandBehavior.SequentialAccess)) {
while (await reader.ReadAsync()) {
Console.WriteLine("{0}: ", reader.GetInt32(0));
if (await reader.IsDBNullAsync(1)) {
Console.WriteLine("\t(NULL)");
}
else {
using (XmlReader xmlReader = reader.GetXmlReader(1)) {
int depth = 1;
// NOTE: The XmlReader returned by GetXmlReader does NOT support async operations.
// See the example below (PrintXmlValuesViaNVarChar) for how to get an XmlReader with asynchronous capabilities.
while (xmlReader.Read()) {
switch (xmlReader.NodeType) {
case XmlNodeType.Element:
Console.WriteLine("{0}<{1}>", new string('\t', depth), xmlReader.Name);
depth++;
break;
case XmlNodeType.Text:
Console.WriteLine("{0}{1}", new string('\t', depth), xmlReader.Value);
break;
case XmlNodeType.EndElement:
depth--;
Console.WriteLine("{0}</{1}>", new string('\t', depth), xmlReader.Name);
break;
}
}
}
}
}
}
}
}
}
// Transfer a large Xml Document from SQL Server in .NET Framework 4.5.
// This goes via NVarChar and TextReader to enable asynchronous reading.
private static async Task PrintXmlValuesViaNVarChar() {
XmlReaderSettings xmlSettings = new XmlReaderSettings() {
// Async must be explicitly enabled in the XmlReaderSettings otherwise the XmlReader will throw exceptions when async methods are called.
Async = true,
// Since we will immediately wrap the TextReader we are creating in an XmlReader, we will permit the XmlReader to take care of closing\disposing it.
CloseInput = true,
// If the Xml you are reading is not a valid document (as per <https://learn.microsoft.com/previous-versions/dotnet/netframework-4.0/6bts1x50(v=vs.100)>) you will need to set the conformance level to Fragment.
ConformanceLevel = ConformanceLevel.Fragment
};
using (SqlConnection connection = new SqlConnection(connectionString)) {
await connection.OpenAsync();
// Cast the XML into NVarChar to enable GetTextReader - trying to use GetTextReader on an XML type will throw an exception.
using (SqlCommand command = new SqlCommand("SELECT [id], CAST([xmldata] AS NVARCHAR(MAX)) FROM [Streams]", connection)) {
// The reader needs to be executed with the SequentialAccess behavior to enable network streaming.
// Otherwise ReadAsync will buffer the entire Xml Document into memory which can cause scalability issues or even OutOfMemoryExceptions.
using (SqlDataReader reader = await command.ExecuteReaderAsync(CommandBehavior.SequentialAccess)) {
while (await reader.ReadAsync()) {
Console.WriteLine("{0}:", reader.GetInt32(0));
if (await reader.IsDBNullAsync(1)) {
Console.WriteLine("\t(NULL)");
}
else {
// Grab the row as a TextReader, then create an XmlReader on top of it.
// The code doesn't keep a reference to the TextReader since the XmlReader is created with the "CloseInput" setting (so it will close the TextReader when needed).
using (XmlReader xmlReader = XmlReader.Create(reader.GetTextReader(1), xmlSettings)) {
int depth = 1;
// The XmlReader above now supports asynchronous operations, so we can use ReadAsync here.
while (await xmlReader.ReadAsync()) {
switch (xmlReader.NodeType) {
case XmlNodeType.Element:
Console.WriteLine("{0}<{1}>", new string('\t', depth), xmlReader.Name);
depth++;
break;
case XmlNodeType.Text:
// Depending on what your data looks like, you should either use Value or GetValueAsync.
// Value has less overhead (since it doesn't create a Task), but it may also block if additional data is required.
Console.WriteLine("{0}{1}", new string('\t', depth), await xmlReader.GetValueAsync());
break;
case XmlNodeType.EndElement:
depth--;
Console.WriteLine("{0}</{1}>", new string('\t', depth), xmlReader.Name);
break;
}
}
}
}
}
}
}
}
}
}
}
Exempel: Direktuppspelning till SQL Server
Använd följande Transact-SQL för att skapa exempeldatabasen:
CREATE DATABASE [Demo2]
GO
USE [Demo2]
GO
CREATE TABLE [BinaryStreams] (
[id] INT PRIMARY KEY IDENTITY(1, 1),
[bindata] VARBINARY(MAX))
GO
CREATE TABLE [TextStreams] (
[id] INT PRIMARY KEY IDENTITY(1, 1),
[textdata] NVARCHAR(MAX))
GO
CREATE TABLE [BinaryStreamsCopy] (
[id] INT PRIMARY KEY IDENTITY(1, 1),
[bindata] VARBINARY(MAX))
GO
Exemplet visar hur du gör följande:
- Överför en stor BLOB till SQL Server i .NET Framework 4.5.
- Överför en stor textfil till SQL Server i .NET Framework 4.5.
- Använd den nya asynkrona funktionen för att överföra en stor BLOB.
- Använd den nya asynkrona funktionen och nyckelordet await för att överföra en stor BLOB.
- Avbryt överföringen av en stor BLOB.
- Strömma från en SQL Server till en annan med den nya asynkrona funktionen.
using System;
using System.Data;
using System.Data.SqlClient;
using System.IO;
using System.Threading;
using System.Threading.Tasks;
namespace StreamingToServer {
class Program {
private const string connectionString = @"...";
static void Main(string[] args) {
CreateDemoFiles();
StreamBLOBToServer().Wait();
StreamTextToServer().Wait();
// Create a CancellationTokenSource that will be cancelled after 100ms
// Typically this token source will be cancelled by a user request (e.g. a Cancel button).
CancellationTokenSource tokenSource = new CancellationTokenSource();
tokenSource.CancelAfter(100);
try {
CancelBLOBStream(tokenSource.Token).Wait();
}
catch (AggregateException ex) {
// Cancelling an async operation will throw an exception.
// Since we are using the Task's Wait method, this exception will be wrapped in an AggregateException.
// If you were using the 'await' keyword, the compiler would take care of unwrapping the AggregateException.
// Depending on when the cancellation occurs, you can either get an error from SQL Server or from .Net.
if ((ex.InnerException is SqlException) || (ex.InnerException is TaskCanceledException)) {
// This is an expected exception.
Console.WriteLine("Got expected exception: {0}", ex.InnerException.Message);
}
else {
// Did not expect this exception - rethrow it.
throw;
}
}
Console.WriteLine("Done");
}
// This is used to generate the files which are used by the other sample methods.
private static void CreateDemoFiles() {
Random rand = new Random();
byte[] data = new byte[1024];
rand.NextBytes(data);
using (FileStream file = File.Open("binarydata.bin", FileMode.Create)) {
file.Write(data, 0, data.Length);
}
using (StreamWriter writer = new StreamWriter(File.Open("textdata.txt", FileMode.Create))) {
writer.Write(Convert.ToBase64String(data));
}
}
// Transfer a large BLOB to SQL Server in .NET Framework 4.5.
private static async Task StreamBLOBToServer() {
using (SqlConnection conn = new SqlConnection(connectionString)) {
await conn.OpenAsync();
using (SqlCommand cmd = new SqlCommand("INSERT INTO [BinaryStreams] (bindata) VALUES (@bindata)", conn)) {
using (FileStream file = File.Open("binarydata.bin", FileMode.Open)) {
// Add a parameter which uses the FileStream we just opened
// Size is set to -1 to indicate "MAX".
cmd.Parameters.Add("@bindata", SqlDbType.Binary, -1).Value = file;
// Send the data to the server asynchronously.
await cmd.ExecuteNonQueryAsync();
}
}
}
}
// Transfer a large Text File to SQL Server in .NET Framework 4.5.
private static async Task StreamTextToServer() {
using (SqlConnection conn = new SqlConnection(connectionString)) {
await conn.OpenAsync();
using (SqlCommand cmd = new SqlCommand("INSERT INTO [TextStreams] (textdata) VALUES (@textdata)", conn)) {
using (StreamReader file = File.OpenText("textdata.txt")) {
// Add a parameter which uses the StreamReader we just opened.
// Size is set to -1 to indicate "MAX".
cmd.Parameters.Add("@textdata", SqlDbType.NVarChar, -1).Value = file;
// Send the data to the server asynchronously.
await cmd.ExecuteNonQueryAsync();
}
}
}
}
// Cancel the transfer of a large BLOB.
private static async Task CancelBLOBStream(CancellationToken cancellationToken) {
using (SqlConnection conn = new SqlConnection(connectionString)) {
// We can cancel not only sending the data to the server, but also opening the connection.
await conn.OpenAsync(cancellationToken);
// Artificially delay the command by 100ms.
using (SqlCommand cmd = new SqlCommand("WAITFOR DELAY '00:00:00:100';INSERT INTO [BinaryStreams] (bindata) VALUES (@bindata)", conn)) {
using (FileStream file = File.Open("binarydata.bin", FileMode.Open)) {
// Add a parameter which uses the FileStream we just opened.
// Size is set to -1 to indicate "MAX".
cmd.Parameters.Add("@bindata", SqlDbType.Binary, -1).Value = file;
// Send the data to the server asynchronously.
// Pass the cancellation token such that the command will be cancelled if needed.
await cmd.ExecuteNonQueryAsync(cancellationToken);
}
}
}
}
}
}
Exempel: Direktuppspelning från en SQL Server till en annan SQL Server
Det här exemplet visar hur du asynkront strömmar en stor BLOB från en SQL Server till en annan, med stöd för annullering.
using System;
using System.Data;
using System.Data.SqlClient;
using System.IO;
using System.Threading;
using System.Threading.Tasks;
namespace StreamingFromServerToAnother {
class Program {
private const string connectionString = @"...";
static void Main(string[] args) {
// For this example, we don't want to cancel,
// so pass in a "blank" cancellation token.
E2EStream(CancellationToken.None).Wait();
Console.WriteLine("Done");
}
// Streaming from one SQL Server to Another One using the new Async.NET.
private static async Task E2EStream(CancellationToken cancellationToken) {
using (SqlConnection readConn = new SqlConnection(connectionString)) {
using (SqlConnection writeConn = new SqlConnection(connectionString)) {
// Note that we are using the same cancellation token for calls to both connections\commands.
// Also we can start both the connection opening asynchronously, and then wait for both to complete.
Task openReadConn = readConn.OpenAsync(cancellationToken);
Task openWriteConn = writeConn.OpenAsync(cancellationToken);
await Task.WhenAll(openReadConn, openWriteConn);
using (SqlCommand readCmd = new SqlCommand("SELECT [bindata] FROM [BinaryStreams]", readConn)) {
using (SqlCommand writeCmd = new SqlCommand("INSERT INTO [BinaryStreamsCopy] (bindata) VALUES (@bindata)", writeConn)) {
// Add an empty parameter to the write command which will be used for the streams we are copying.
// Size is set to -1 to indicate "MAX".
SqlParameter streamParameter = writeCmd.Parameters.Add("@bindata", SqlDbType.Binary, -1);
// The reader needs to be executed with the SequentialAccess behavior to enable network streaming.
// Otherwise ReadAsync will buffer the entire BLOB into memory which can cause scalability issues or even OutOfMemoryExceptions.
using (SqlDataReader reader = await readCmd.ExecuteReaderAsync(CommandBehavior.SequentialAccess, cancellationToken)) {
while (await reader.ReadAsync(cancellationToken)) {
// Grab a stream to the binary data in the source database.
using (Stream dataStream = reader.GetStream(0)) {
// Set the parameter value to the stream source that was opened.
streamParameter.Value = dataStream;
// Asynchronously send data from one database to another.
await writeCmd.ExecuteNonQueryAsync(cancellationToken);
}
}
}
}
}
}
}
}
}
}