Så här lägger du till och tar bort objekt från en ConcurrentDictionary
Det här exemplet visar hur du lägger till, hämtar, uppdaterar och tar bort objekt från en System.Collections.Concurrent.ConcurrentDictionary<TKey,TValue>. Den här samlingsklassen är en trådsäker implementering. Vi rekommenderar att du använder den när flera trådar försöker komma åt elementen samtidigt.
ConcurrentDictionary<TKey,TValue> innehåller flera bekvämlighetsmetoder som gör det onödigt att kod först kontrollerar om det finns en nyckel innan den försöker lägga till eller ta bort data. I följande tabell visas dessa bekvämlighetsmetoder och beskriver när du ska använda dem.
| Metod | Använd när |
|---|---|
| AddOrUpdate | Du vill lägga till ett nytt värde för en angiven nyckel och om nyckeln redan finns vill du ersätta dess värde. |
| GetOrAdd | Du vill hämta det befintliga värdet för en angiven nyckel och om nyckeln inte finns vill du ange ett nyckel/värde-par. |
| TryAdd, TryGetValue, , TryUpdateTryRemove | Du vill lägga till, hämta, uppdatera eller ta bort ett nyckel/värde-par, och om nyckeln redan finns eller om försöket misslyckas av någon annan anledning vill du vidta någon alternativ åtgärd. |
Exempel
I följande exempel används två Task instanser för att lägga till vissa element i en ConcurrentDictionary<TKey,TValue> samtidigt och sedan matas allt innehåll ut för att visa att elementen har lagts till. Exemplet visar också hur du använder AddOrUpdatemetoderna , TryGetValueoch GetOrAdd för att lägga till, uppdatera och hämta objekt från samlingen.
using System;
using System.Collections.Concurrent;
using System.Collections.Generic;
using System.Threading;
using System.Threading.Tasks;
namespace DictionaryHowTo
{
// The type of the Value to store in the dictionary.
class CityInfo : IEqualityComparer<CityInfo>
{
public string Name { get; set; }
public DateTime LastQueryDate { get; set; } = DateTime.Now;
public decimal Longitude { get; set; } = decimal.MaxValue;
public decimal Latitude { get; set; } = decimal.MaxValue;
public int[] RecentHighTemperatures { get; set; } = new int[] { 0 };
public bool Equals(CityInfo x, CityInfo y)
=> (x.Name, x.Longitude, x.Latitude) ==
(y.Name, y.Longitude, y.Latitude);
public int GetHashCode(CityInfo cityInfo) =>
cityInfo?.Name.GetHashCode() ?? throw new ArgumentNullException(nameof(cityInfo));
}
class Program
{
static readonly ConcurrentDictionary<string, CityInfo> Cities =
new ConcurrentDictionary<string, CityInfo>(StringComparer.OrdinalIgnoreCase);
static async Task Main()
{
CityInfo[] cityData =
{
new CityInfo { Name = "Boston", Latitude = 42.358769m, Longitude = -71.057806m, RecentHighTemperatures = new int[] { 56, 51, 52, 58, 65, 56,53} },
new CityInfo { Name = "Miami", Latitude = 25.780833m, Longitude = -80.195556m, RecentHighTemperatures = new int[] { 86,87,88,87,85,85,86 } },
new CityInfo { Name = "Los Angeles", Latitude = 34.05m, Longitude = -118.25m, RecentHighTemperatures = new int[] { 67,68,69,73,79,78,78 } },
new CityInfo { Name = "Seattle", Latitude = 47.609722m, Longitude = -122.333056m, RecentHighTemperatures = new int[] { 49,50,53,47,52,52,51 } },
new CityInfo { Name = "Toronto", Latitude = 43.716589m, Longitude = -79.340686m, RecentHighTemperatures = new int[] { 53,57, 51,52,56,55,50 } },
new CityInfo { Name = "Mexico City", Latitude = 19.432736m, Longitude = -99.133253m, RecentHighTemperatures = new int[] { 72,68,73,77,76,74,73 } },
new CityInfo { Name = "Rio de Janeiro", Latitude = -22.908333m, Longitude = -43.196389m, RecentHighTemperatures = new int[] { 72,68,73,82,84,78,84 } },
new CityInfo { Name = "Quito", Latitude = -0.25m, Longitude = -78.583333m, RecentHighTemperatures = new int[] { 71,69,70,66,65,64,61 } },
new CityInfo { Name = "Milwaukee", Latitude = -43.04181m, Longitude = -87.90684m, RecentHighTemperatures = new int[] { 32,47,52,64,49,44,56 } }
};
// Add some key/value pairs from multiple threads.
await Task.WhenAll(
Task.Run(() => TryAddCities(cityData)),
Task.Run(() => TryAddCities(cityData)));
static void TryAddCities(CityInfo[] cities)
{
for (var i = 0; i < cities.Length; ++i)
{
var (city, threadId) = (cities[i], Thread.CurrentThread.ManagedThreadId);
if (Cities.TryAdd(city.Name, city))
{
Console.WriteLine($"Thread={threadId}, added {city.Name}.");
}
else
{
Console.WriteLine($"Thread={threadId}, could not add {city.Name}, it was already added.");
}
}
}
// Enumerate collection from the app main thread.
// Note that ConcurrentDictionary is the one concurrent collection
// that does not support thread-safe enumeration.
foreach (var city in Cities)
{
Console.WriteLine($"{city.Key} has been added.");
}
AddOrUpdateWithoutRetrieving();
TryRemoveCity();
RetrieveValueOrAdd();
RetrieveAndUpdateOrAdd();
Console.WriteLine("Press any key.");
Console.ReadKey();
}
// This method shows how to add key-value pairs to the dictionary
// in scenarios where the key might already exist.
static void AddOrUpdateWithoutRetrieving()
{
// Sometime later. We receive new data from some source.
var ci = new CityInfo
{
Name = "Toronto",
Latitude = 43.716589M,
Longitude = -79.340686M,
RecentHighTemperatures = new int[] { 54, 59, 67, 82, 87, 55, -14 }
};
// Try to add data. If it doesn't exist, the object ci is added. If it does
// already exist, update existingVal according to the custom logic.
_ = Cities.AddOrUpdate(
ci.Name,
ci,
(cityName, existingCity) =>
{
// If this delegate is invoked, then the key already exists.
// Here we make sure the city really is the same city we already have.
if (ci != existingCity)
{
// throw new ArgumentException($"Duplicate city names are not allowed: {ci.Name}.");
}
// The only updatable fields are the temperature array and LastQueryDate.
existingCity.LastQueryDate = DateTime.Now;
existingCity.RecentHighTemperatures = ci.RecentHighTemperatures;
return existingCity;
});
// Verify that the dictionary contains the new or updated data.
Console.Write($"Most recent high temperatures for {ci.Name} are: ");
var temps = Cities[ci.Name].RecentHighTemperatures;
Console.WriteLine(string.Join(", ", temps));
}
// This method shows how to use data and ensure that it has been
// added to the dictionary.
static void RetrieveValueOrAdd()
{
var searchKey = "Caracas";
CityInfo retrievedValue = null;
try
{
retrievedValue = Cities.GetOrAdd(searchKey, GetDataForCity(searchKey));
}
catch (ArgumentException e)
{
Console.WriteLine(e.Message);
}
// Use the data.
if (retrievedValue != null)
{
Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ");
var temps = Cities[retrievedValue.Name].RecentHighTemperatures;
Console.WriteLine(string.Join(", ", temps));
}
}
// This method shows how to remove a value from the dictionary.
// If the value is unable to be removed, you can handle that by using the return
// boolean value from the .TryRemove function.
static void TryRemoveCity()
{
Console.WriteLine($"Total cities = {Cities.Count}");
var searchKey = "Milwaukee";
if (Cities.TryRemove(searchKey, out CityInfo retrievedValue))
{
Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ");
var temps = retrievedValue.RecentHighTemperatures;
Console.WriteLine(string.Join(", ", temps));
}
else
{
Console.WriteLine($"Unable to remove {searchKey}");
}
Console.WriteLine($"Total cities = {Cities.Count}");
}
// This method shows how to retrieve a value from the dictionary,
// when you expect that the key/value pair already exists,
// and then possibly update the dictionary with a new value for the key.
static void RetrieveAndUpdateOrAdd()
{
var searchKey = "Buenos Aires";
if (Cities.TryGetValue(searchKey, out CityInfo retrievedValue))
{
// Use the data.
Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ");
var temps = retrievedValue.RecentHighTemperatures;
Console.WriteLine(string.Join(", ", temps));
// Make a copy of the data. Our object will update its LastQueryDate automatically.
var newValue = new CityInfo
{
Name = retrievedValue.Name,
Latitude = retrievedValue.Latitude,
Longitude = retrievedValue.Longitude,
RecentHighTemperatures = retrievedValue.RecentHighTemperatures
};
// Replace the old value with the new value.
if (!Cities.TryUpdate(searchKey, newValue, retrievedValue))
{
// The data was not updated. Log error, throw exception, etc.
Console.WriteLine($"Could not update {retrievedValue.Name}");
}
}
else
{
// Add the new key and value. Here we call a method to retrieve
// the data. Another option is to add a default value here and
// update with real data later on some other thread.
var newValue = GetDataForCity(searchKey);
if (Cities.TryAdd(searchKey, newValue))
{
// Use the data.
Console.Write($"Most recent high temperatures for {newValue.Name} are: ");
var temps = newValue.RecentHighTemperatures;
Console.WriteLine(string.Join(", ", temps));
}
else
{
Console.WriteLine($"Unable to add data for {searchKey}");
}
}
}
// Assume this method knows how to find long/lat/temp info for any specified city.
static CityInfo GetDataForCity(string name) => name switch
{
"Caracas" => new CityInfo
{
Name = "Caracas",
Longitude = 10.5M,
Latitude = -66.916667M,
RecentHighTemperatures = new int[] { 91, 89, 91, 91, 87, 90, 91 }
},
"Buenos Aires" => new CityInfo
{
Name = "Buenos Aires",
Longitude = -34.61M,
Latitude = -58.369997M,
RecentHighTemperatures = new int[] { 80, 86, 89, 91, 84, 86, 88 }
},
_ => throw new ArgumentException($"Cannot find any data for {name}")
};
}
}
Imports System.Collections.Concurrent
Imports System.Collections.Generic
Imports System.Linq
Imports System.Text
Imports System.Threading
Imports System.Threading.Tasks
Namespace DictionaryHowToVB
' The type of the value to store in the dictionary.
Class CityInfo
Public Property Name As String
Public Property LastQueryDate As DateTime
Public Property Longitude As Decimal
Public Property Latitude As Decimal
Public Property RecentHighTemperatures As Integer()
Public Sub New()
End Sub
Public Sub New(key As String)
Name = key
' MaxValue means "not initialized".
Longitude = Decimal.MaxValue
Latitude = Decimal.MaxValue
LastQueryDate = DateTime.Now
RecentHighTemperatures = {0}
End Sub
Public Sub New(name As String, longitude As Decimal, latitude As Decimal, temps As Integer())
Me.Name = name
Me.Longitude = longitude
Me.Latitude = latitude
RecentHighTemperatures = temps
End Sub
End Class
Class Program
' Create a new concurrent dictionary with the specified concurrency level and capacity.
Shared cities As New ConcurrentDictionary(Of String, CityInfo)(System.Environment.ProcessorCount, 10)
Shared Sub Main()
Dim data As CityInfo() =
{New CityInfo With {.Name = "Boston", .Latitude = 42.358769, .Longitude = -71.057806, .RecentHighTemperatures = {56, 51, 52, 58, 65, 56, 53}},
New CityInfo With {.Name = "Miami", .Latitude = 25.780833, .Longitude = -80.195556, .RecentHighTemperatures = {86, 87, 88, 87, 85, 85, 86}},
New CityInfo With {.Name = "Los Angeles", .Latitude = 34.05, .Longitude = -118.25, .RecentHighTemperatures = {67, 68, 69, 73, 79, 78, 78}},
New CityInfo With {.Name = "Seattle", .Latitude = 47.609722, .Longitude = -122.333056, .RecentHighTemperatures = {49, 50, 53, 47, 52, 52, 51}},
New CityInfo With {.Name = "Toronto", .Latitude = 43.716589, .Longitude = -79.340686, .RecentHighTemperatures = {53, 57, 51, 52, 56, 55, 50}},
New CityInfo With {.Name = "Mexico City", .Latitude = 19.432736, .Longitude = -99.133253, .RecentHighTemperatures = {72, 68, 73, 77, 76, 74, 73}},
New CityInfo With {.Name = "Rio de Janiero", .Latitude = -22.908333, .Longitude = -43.196389, .RecentHighTemperatures = {72, 68, 73, 82, 84, 78, 84}},
New CityInfo With {.Name = "Quito", .Latitude = -0.25, .Longitude = -78.583333, .RecentHighTemperatures = {71, 69, 70, 66, 65, 64, 61}}}
' Add some key/value pairs from multiple threads.
Dim tasks(1) As Task
tasks(0) = Task.Run(Sub()
For i As Integer = 0 To 1
If cities.TryAdd(data(i).Name, data(i)) Then
Console.WriteLine($"Added {data(i).Name} on thread {Thread.CurrentThread.ManagedThreadId}")
Else
Console.WriteLine($"Could not add {data(i)}")
End If
Next
End Sub)
tasks(1) = Task.Run(Sub()
For i As Integer = 2 To data.Length - 1
If cities.TryAdd(data(i).Name, data(i)) Then
Console.WriteLine($"Added {data(i).Name} on thread {Thread.CurrentThread.ManagedThreadId}")
Else
Console.WriteLine($"Could not add {data(i)}")
End If
Next
End Sub)
' Output results so far.
Task.WaitAll(tasks)
' Enumerate data on main thread. Note that
' ConcurrentDictionary is the one collection class
' that does not support thread-safe enumeration.
For Each city In cities
Console.WriteLine($"{city.Key} has been added")
Next
AddOrUpdateWithoutRetrieving()
RetrieveValueOrAdd()
RetrieveAndUpdateOrAdd()
Console.WriteLine("Press any key")
Console.ReadKey()
End Sub
' This method shows how to add key-value pairs to the dictionary
' in scenarios where the key might already exist.
Private Shared Sub AddOrUpdateWithoutRetrieving()
' Sometime later. We receive new data from some source.
Dim ci As New CityInfo With {.Name = "Toronto", .Latitude = 43.716589, .Longitude = -79.340686, .RecentHighTemperatures = {54, 59, 67, 82, 87, 55, -14}}
' Try to add data. If it doesn't exist, the object ci is added. If it does
' already exist, update existingVal according to the custom logic in the
' delegate.
cities.AddOrUpdate(ci.Name, ci, Function(key, existingVal)
' If this delegate is invoked, then the key already exists.
' Here we make sure the city really is the same city we already have.
' (Support for multiple keys of the same name is left as an exercise for the reader.)
If (ci.Name = existingVal.Name And ci.Longitude = existingVal.Longitude) = False Then
Throw New ArgumentException($"Duplicate city names are not allowed: {ci.Name}.")
End If
' The only updatable fields are the temperature array and LastQueryDate.
existingVal.LastQueryDate = DateTime.Now
existingVal.RecentHighTemperatures = ci.RecentHighTemperatures
Return existingVal
End Function)
' Verify that the dictionary contains the new or updated data.
Console.Write($"Most recent high temperatures for {cities(ci.Name).Name} are: ")
Dim temps = cities(ci.Name).RecentHighTemperatures
For Each temp In temps
Console.Write($"{temp}, ")
Next
Console.WriteLine()
End Sub
'This method shows how to use data and ensure that it has been
' added to the dictionary.
Private Shared Sub RetrieveValueOrAdd()
Dim searchKey = "Caracas"
Dim retrievedValue As CityInfo = Nothing
Try
retrievedValue = cities.GetOrAdd(searchKey, GetDataForCity(searchKey))
Catch e As ArgumentException
Console.WriteLine(e.Message)
End Try
' Use the data.
If Not retrievedValue Is Nothing Then
Console.WriteLine($"Most recent high temperatures for {retrievedValue.Name} are: ")
Dim temps = cities(retrievedValue.Name).RecentHighTemperatures
For Each temp In temps
Console.Write($"{temp}, ")
Next
End If
Console.WriteLine()
End Sub
' This method shows how to retrieve a value from the dictionary,
' when you expect that the key/value pair already exists,
' and then possibly update the dictionary with a new value for the key.
Private Shared Sub RetrieveAndUpdateOrAdd()
Dim retrievedValue As New CityInfo()
Dim searchKey = "Buenos Aires"
If (cities.TryGetValue(searchKey, retrievedValue)) Then
' Use the data.
Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ")
Dim temps = retrievedValue.RecentHighTemperatures
For Each temp In temps
Console.Write($"{temp}, ")
Next
' Make a copy of the data. Our object will update its LastQueryDate automatically.
Dim newValue As New CityInfo(retrievedValue.Name,
retrievedValue.Longitude,
retrievedValue.Latitude,
retrievedValue.RecentHighTemperatures)
Else
Console.WriteLine($"Unable to find data for {searchKey}")
End If
End Sub
' Assume this method knows how to find long/lat/temp info for any specified city.
Private Shared Function GetDataForCity(searchKey As String) As CityInfo
' Real implementation left as exercise for the reader.
If String.CompareOrdinal(searchKey, "Caracas") = 0 Then
Return New CityInfo() With {.Name = "Caracas",
.Longitude = 10.5,
.Latitude = -66.916667,
.RecentHighTemperatures = {91, 89, 91, 91, 87, 90, 91}}
ElseIf String.CompareOrdinal(searchKey, "Buenos Aires") = 0 Then
Return New CityInfo() With {.Name = "Buenos Aires",
.Longitude = -34.61,
.Latitude = -58.369997,
.RecentHighTemperatures = {80, 86, 89, 91, 84, 86, 88}}
Else
Throw New ArgumentException($"Cannot find any data for {searchKey}")
End If
End Function
End Class
End Namespace
ConcurrentDictionary<TKey,TValue> är utformad för flertrådade scenarier. Du behöver inte använda lås i koden för att lägga till eller ta bort objekt från samlingen. Det är dock alltid möjligt för en tråd att hämta ett värde och en annan tråd att omedelbart uppdatera samlingen genom att ge samma nyckel ett nytt värde.
Även om alla metoder för ConcurrentDictionary<TKey,TValue> är trådsäkra är inte alla metoder atomiska, specifikt GetOrAdd och AddOrUpdate. För att förhindra att okänd kod blockerar alla trådar anropas användardelegaten som skickas till dessa metoder utanför ordlistans interna lås. Därför är det möjligt att den här sekvensen av händelser inträffar:
threadA anropar GetOrAdd, hittar inget objekt och skapar ett nytt objekt att lägga till genom att anropa ombudet
valueFactory.threadB anropar GetOrAdd samtidigt, dess
valueFactoryombud anropas och det kommer till det interna låset före threadA, så dess nya nyckel/värde-par läggs till i ordlistan.threadA:s användardelegat slutförs och tråden anländer till låset, men ser nu att objektet redan finns.
threadA utför en "Get" och returnerar de data som tidigare lades till av threadB.
Därför är det inte garanterat att de data som returneras av GetOrAdd är samma data som skapades av trådens valueFactory. En liknande sekvens av händelser kan inträffa när AddOrUpdate anropas.
Se även
Samarbeta med oss på GitHub
Källan för det här innehållet finns på GitHub, där du även kan skapa och granska ärenden och pull-begäranden. Se vår deltagarguide för mer information.
