Genomgång: Skapa en anpassad blocktyp för dataflöde
Även om TPL-dataflödesbiblioteket innehåller flera blocktyper för dataflöden som möjliggör en mängd olika funktioner, kan du också skapa anpassade blocktyper. Det här dokumentet beskriver hur du skapar en blocktyp för dataflöde som implementerar anpassat beteende.
Krav
Läs Dataflöde innan du läser det här dokumentet.
Anteckning
TPL-dataflödesbiblioteket System.Threading.Tasks.Dataflow (namnområdet) distribueras inte med .NET. Om du vill installera System.Threading.Tasks.Dataflow namnområdet i Visual Studio öppnar du projektet, väljer Hantera NuGet-paket på Project-menyn och söker online efter System.Threading.Tasks.Dataflow paketet. Du kan också installera det med .NET Core CLI genom att köra dotnet add package System.Threading.Tasks.Dataflow.
Definiera dataflödesblocket för skjutfönster
Överväg ett dataflödesprogram som kräver att indatavärden buffras och sedan matas ut på ett glidande fönster. För indatavärdena {0, 1, 2, 3, 4, 5} och en fönsterstorlek på tre skapar ett skjutfönsterdataflödesblock utdatamatriserna {0, 1, 2}, {1, 2, 3}, {2, 3, 4} och {3, 4, 5}. I följande avsnitt beskrivs två sätt att skapa en blocktyp för dataflöde som implementerar det här anpassade beteendet. Den första metoden använder Encapsulate metoden för att kombinera funktionerna i ett ISourceBlock<TOutput> objekt och ett ITargetBlock<TInput> objekt till ett spridningsblock. Den andra tekniken definierar en klass som härleds från IPropagatorBlock<TInput,TOutput> och kombinerar befintliga funktioner för att utföra anpassat beteende.
Använda metoden Encapsulate för att definiera dataflödesblocket för skjutfönster
I följande exempel används Encapsulate metoden för att skapa ett spridningsblock från ett mål och en källa. Med ett spridningsblock kan ett källblock och ett målblock fungera som mottagare och avsändare av data.
Den här tekniken är användbar när du behöver anpassade dataflödesfunktioner, men du behöver ingen typ som tillhandahåller ytterligare metoder, egenskaper eller fält.
// Creates a IPropagatorBlock<T, T[]> object propagates data in a
// sliding window fashion.
public static IPropagatorBlock<T, T[]> CreateSlidingWindow<T>(int windowSize)
{
// Create a queue to hold messages.
var queue = new Queue<T>();
// The source part of the propagator holds arrays of size windowSize
// and propagates data out to any connected targets.
var source = new BufferBlock<T[]>();
// The target part receives data and adds them to the queue.
var target = new ActionBlock<T>(item =>
{
// Add the item to the queue.
queue.Enqueue(item);
// Remove the oldest item when the queue size exceeds the window size.
if (queue.Count > windowSize)
queue.Dequeue();
// Post the data in the queue to the source block when the queue size
// equals the window size.
if (queue.Count == windowSize)
source.Post(queue.ToArray());
});
// When the target is set to the completed state, propagate out any
// remaining data and set the source to the completed state.
target.Completion.ContinueWith(delegate
{
if (queue.Count > 0 && queue.Count < windowSize)
source.Post(queue.ToArray());
source.Complete();
});
// Return a IPropagatorBlock<T, T[]> object that encapsulates the
// target and source blocks.
return DataflowBlock.Encapsulate(target, source);
}
' Creates a IPropagatorBlock<T, T[]> object propagates data in a
' sliding window fashion.
Public Shared Function CreateSlidingWindow(Of T)(ByVal windowSize As Integer) As IPropagatorBlock(Of T, T())
' Create a queue to hold messages.
Dim queue = New Queue(Of T)()
' The source part of the propagator holds arrays of size windowSize
' and propagates data out to any connected targets.
Dim source = New BufferBlock(Of T())()
' The target part receives data and adds them to the queue.
Dim target = New ActionBlock(Of T)(Sub(item)
' Add the item to the queue.
' Remove the oldest item when the queue size exceeds the window size.
' Post the data in the queue to the source block when the queue size
' equals the window size.
queue.Enqueue(item)
If queue.Count > windowSize Then
queue.Dequeue()
End If
If queue.Count = windowSize Then
source.Post(queue.ToArray())
End If
End Sub)
' When the target is set to the completed state, propagate out any
' remaining data and set the source to the completed state.
target.Completion.ContinueWith(Sub()
If queue.Count > 0 AndAlso queue.Count < windowSize Then
source.Post(queue.ToArray())
End If
source.Complete()
End Sub)
' Return a IPropagatorBlock<T, T[]> object that encapsulates the
' target and source blocks.
Return DataflowBlock.Encapsulate(target, source)
End Function
Härleda från IPropagatorBlock för att definiera dataflödesblocket för skjutfönster
I följande exempel visas SlidingWindowBlock klassen . Den här klassen härleds från IPropagatorBlock<TInput,TOutput> så att den kan fungera som både en källa och ett mål för data. Precis som i föregående exempel SlidingWindowBlock bygger klassen på befintliga typer av dataflödesblock. SlidingWindowBlock Men klassen implementerar också de metoder som krävs av gränssnitten ISourceBlock<TOutput>, ITargetBlock<TInput>och IDataflowBlock . De här metoderna vidarebefordrar allt arbete till de fördefinierade medlemmarna i dataflödesblocktypen. Metoden defers fungerar till exempel Post till m_target datamedlemmen, som också är ett ITargetBlock<TInput> -objekt.
Den här tekniken är användbar när du behöver anpassade dataflödesfunktioner och även kräver en typ som tillhandahåller ytterligare metoder, egenskaper eller fält. Klassen härleds till exempel SlidingWindowBlock också från IReceivableSourceBlock<TOutput> så att den kan tillhandahålla TryReceive metoderna och TryReceiveAll . Klassen SlidingWindowBlock visar också utökningsbarhet genom att ange WindowSize egenskapen , som hämtar antalet element i skjutfönstret.
// Propagates data in a sliding window fashion.
public class SlidingWindowBlock<T> : IPropagatorBlock<T, T[]>,
IReceivableSourceBlock<T[]>
{
// The size of the window.
private readonly int m_windowSize;
// The target part of the block.
private readonly ITargetBlock<T> m_target;
// The source part of the block.
private readonly IReceivableSourceBlock<T[]> m_source;
// Constructs a SlidingWindowBlock object.
public SlidingWindowBlock(int windowSize)
{
// Create a queue to hold messages.
var queue = new Queue<T>();
// The source part of the propagator holds arrays of size windowSize
// and propagates data out to any connected targets.
var source = new BufferBlock<T[]>();
// The target part receives data and adds them to the queue.
var target = new ActionBlock<T>(item =>
{
// Add the item to the queue.
queue.Enqueue(item);
// Remove the oldest item when the queue size exceeds the window size.
if (queue.Count > windowSize)
queue.Dequeue();
// Post the data in the queue to the source block when the queue size
// equals the window size.
if (queue.Count == windowSize)
source.Post(queue.ToArray());
});
// When the target is set to the completed state, propagate out any
// remaining data and set the source to the completed state.
target.Completion.ContinueWith(delegate
{
if (queue.Count > 0 && queue.Count < windowSize)
source.Post(queue.ToArray());
source.Complete();
});
m_windowSize = windowSize;
m_target = target;
m_source = source;
}
// Retrieves the size of the window.
public int WindowSize { get { return m_windowSize; } }
#region IReceivableSourceBlock<TOutput> members
// Attempts to synchronously receive an item from the source.
public bool TryReceive(Predicate<T[]> filter, out T[] item)
{
return m_source.TryReceive(filter, out item);
}
// Attempts to remove all available elements from the source into a new
// array that is returned.
public bool TryReceiveAll(out IList<T[]> items)
{
return m_source.TryReceiveAll(out items);
}
#endregion
#region ISourceBlock<TOutput> members
// Links this dataflow block to the provided target.
public IDisposable LinkTo(ITargetBlock<T[]> target, DataflowLinkOptions linkOptions)
{
return m_source.LinkTo(target, linkOptions);
}
// Called by a target to reserve a message previously offered by a source
// but not yet consumed by this target.
bool ISourceBlock<T[]>.ReserveMessage(DataflowMessageHeader messageHeader,
ITargetBlock<T[]> target)
{
return m_source.ReserveMessage(messageHeader, target);
}
// Called by a target to consume a previously offered message from a source.
T[] ISourceBlock<T[]>.ConsumeMessage(DataflowMessageHeader messageHeader,
ITargetBlock<T[]> target, out bool messageConsumed)
{
return m_source.ConsumeMessage(messageHeader,
target, out messageConsumed);
}
// Called by a target to release a previously reserved message from a source.
void ISourceBlock<T[]>.ReleaseReservation(DataflowMessageHeader messageHeader,
ITargetBlock<T[]> target)
{
m_source.ReleaseReservation(messageHeader, target);
}
#endregion
#region ITargetBlock<TInput> members
// Asynchronously passes a message to the target block, giving the target the
// opportunity to consume the message.
DataflowMessageStatus ITargetBlock<T>.OfferMessage(DataflowMessageHeader messageHeader,
T messageValue, ISourceBlock<T> source, bool consumeToAccept)
{
return m_target.OfferMessage(messageHeader,
messageValue, source, consumeToAccept);
}
#endregion
#region IDataflowBlock members
// Gets a Task that represents the completion of this dataflow block.
public Task Completion { get { return m_source.Completion; } }
// Signals to this target block that it should not accept any more messages,
// nor consume postponed messages.
public void Complete()
{
m_target.Complete();
}
public void Fault(Exception error)
{
m_target.Fault(error);
}
#endregion
}
' Propagates data in a sliding window fashion.
Public Class SlidingWindowBlock(Of T)
Implements IPropagatorBlock(Of T, T()), IReceivableSourceBlock(Of T())
' The size of the window.
Private ReadOnly m_windowSize As Integer
' The target part of the block.
Private ReadOnly m_target As ITargetBlock(Of T)
' The source part of the block.
Private ReadOnly m_source As IReceivableSourceBlock(Of T())
' Constructs a SlidingWindowBlock object.
Public Sub New(ByVal windowSize As Integer)
' Create a queue to hold messages.
Dim queue = New Queue(Of T)()
' The source part of the propagator holds arrays of size windowSize
' and propagates data out to any connected targets.
Dim source = New BufferBlock(Of T())()
' The target part receives data and adds them to the queue.
Dim target = New ActionBlock(Of T)(Sub(item)
' Add the item to the queue.
' Remove the oldest item when the queue size exceeds the window size.
' Post the data in the queue to the source block when the queue size
' equals the window size.
queue.Enqueue(item)
If queue.Count > windowSize Then
queue.Dequeue()
End If
If queue.Count = windowSize Then
source.Post(queue.ToArray())
End If
End Sub)
' When the target is set to the completed state, propagate out any
' remaining data and set the source to the completed state.
target.Completion.ContinueWith(Sub()
If queue.Count > 0 AndAlso queue.Count < windowSize Then
source.Post(queue.ToArray())
End If
source.Complete()
End Sub)
m_windowSize = windowSize
m_target = target
m_source = source
End Sub
' Retrieves the size of the window.
Public ReadOnly Property WindowSize() As Integer
Get
Return m_windowSize
End Get
End Property
'#Region "IReceivableSourceBlock<TOutput> members"
' Attempts to synchronously receive an item from the source.
Public Function TryReceive(ByVal filter As Predicate(Of T()), <System.Runtime.InteropServices.Out()> ByRef item() As T) As Boolean Implements IReceivableSourceBlock(Of T()).TryReceive
Return m_source.TryReceive(filter, item)
End Function
' Attempts to remove all available elements from the source into a new
' array that is returned.
Public Function TryReceiveAll(<System.Runtime.InteropServices.Out()> ByRef items As IList(Of T())) As Boolean Implements IReceivableSourceBlock(Of T()).TryReceiveAll
Return m_source.TryReceiveAll(items)
End Function
'#End Region
#Region "ISourceBlock<TOutput> members"
' Links this dataflow block to the provided target.
Public Function LinkTo(ByVal target As ITargetBlock(Of T()), ByVal linkOptions As DataflowLinkOptions) As IDisposable Implements ISourceBlock(Of T()).LinkTo
Return m_source.LinkTo(target, linkOptions)
End Function
' Called by a target to reserve a message previously offered by a source
' but not yet consumed by this target.
Private Function ReserveMessage(ByVal messageHeader As DataflowMessageHeader, ByVal target As ITargetBlock(Of T())) As Boolean Implements ISourceBlock(Of T()).ReserveMessage
Return m_source.ReserveMessage(messageHeader, target)
End Function
' Called by a target to consume a previously offered message from a source.
Private Function ConsumeMessage(ByVal messageHeader As DataflowMessageHeader, ByVal target As ITargetBlock(Of T()), ByRef messageConsumed As Boolean) As T() Implements ISourceBlock(Of T()).ConsumeMessage
Return m_source.ConsumeMessage(messageHeader, target, messageConsumed)
End Function
' Called by a target to release a previously reserved message from a source.
Private Sub ReleaseReservation(ByVal messageHeader As DataflowMessageHeader, ByVal target As ITargetBlock(Of T())) Implements ISourceBlock(Of T()).ReleaseReservation
m_source.ReleaseReservation(messageHeader, target)
End Sub
#End Region
#Region "ITargetBlock<TInput> members"
' Asynchronously passes a message to the target block, giving the target the
' opportunity to consume the message.
Private Function OfferMessage(ByVal messageHeader As DataflowMessageHeader, ByVal messageValue As T, ByVal source As ISourceBlock(Of T), ByVal consumeToAccept As Boolean) As DataflowMessageStatus Implements ITargetBlock(Of T).OfferMessage
Return m_target.OfferMessage(messageHeader, messageValue, source, consumeToAccept)
End Function
#End Region
#Region "IDataflowBlock members"
' Gets a Task that represents the completion of this dataflow block.
Public ReadOnly Property Completion() As Task Implements IDataflowBlock.Completion
Get
Return m_source.Completion
End Get
End Property
' Signals to this target block that it should not accept any more messages,
' nor consume postponed messages.
Public Sub Complete() Implements IDataflowBlock.Complete
m_target.Complete()
End Sub
Public Sub Fault(ByVal [error] As Exception) Implements IDataflowBlock.Fault
m_target.Fault([error])
End Sub
#End Region
End Class
Det fullständiga exemplet
I följande exempel visas den fullständiga koden för den här genomgången. Den visar också hur du använder de båda skjutfönsterblocken i en metod som skriver till blocket, läser från det och skriver ut resultatet till konsolen.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Threading.Tasks;
using System.Threading.Tasks.Dataflow;
// Demonstrates how to create a custom dataflow block type.
class Program
{
// Creates a IPropagatorBlock<T, T[]> object propagates data in a
// sliding window fashion.
public static IPropagatorBlock<T, T[]> CreateSlidingWindow<T>(int windowSize)
{
// Create a queue to hold messages.
var queue = new Queue<T>();
// The source part of the propagator holds arrays of size windowSize
// and propagates data out to any connected targets.
var source = new BufferBlock<T[]>();
// The target part receives data and adds them to the queue.
var target = new ActionBlock<T>(item =>
{
// Add the item to the queue.
queue.Enqueue(item);
// Remove the oldest item when the queue size exceeds the window size.
if (queue.Count > windowSize)
queue.Dequeue();
// Post the data in the queue to the source block when the queue size
// equals the window size.
if (queue.Count == windowSize)
source.Post(queue.ToArray());
});
// When the target is set to the completed state, propagate out any
// remaining data and set the source to the completed state.
target.Completion.ContinueWith(delegate
{
if (queue.Count > 0 && queue.Count < windowSize)
source.Post(queue.ToArray());
source.Complete();
});
// Return a IPropagatorBlock<T, T[]> object that encapsulates the
// target and source blocks.
return DataflowBlock.Encapsulate(target, source);
}
// Propagates data in a sliding window fashion.
public class SlidingWindowBlock<T> : IPropagatorBlock<T, T[]>,
IReceivableSourceBlock<T[]>
{
// The size of the window.
private readonly int m_windowSize;
// The target part of the block.
private readonly ITargetBlock<T> m_target;
// The source part of the block.
private readonly IReceivableSourceBlock<T[]> m_source;
// Constructs a SlidingWindowBlock object.
public SlidingWindowBlock(int windowSize)
{
// Create a queue to hold messages.
var queue = new Queue<T>();
// The source part of the propagator holds arrays of size windowSize
// and propagates data out to any connected targets.
var source = new BufferBlock<T[]>();
// The target part receives data and adds them to the queue.
var target = new ActionBlock<T>(item =>
{
// Add the item to the queue.
queue.Enqueue(item);
// Remove the oldest item when the queue size exceeds the window size.
if (queue.Count > windowSize)
queue.Dequeue();
// Post the data in the queue to the source block when the queue size
// equals the window size.
if (queue.Count == windowSize)
source.Post(queue.ToArray());
});
// When the target is set to the completed state, propagate out any
// remaining data and set the source to the completed state.
target.Completion.ContinueWith(delegate
{
if (queue.Count > 0 && queue.Count < windowSize)
source.Post(queue.ToArray());
source.Complete();
});
m_windowSize = windowSize;
m_target = target;
m_source = source;
}
// Retrieves the size of the window.
public int WindowSize { get { return m_windowSize; } }
#region IReceivableSourceBlock<TOutput> members
// Attempts to synchronously receive an item from the source.
public bool TryReceive(Predicate<T[]> filter, out T[] item)
{
return m_source.TryReceive(filter, out item);
}
// Attempts to remove all available elements from the source into a new
// array that is returned.
public bool TryReceiveAll(out IList<T[]> items)
{
return m_source.TryReceiveAll(out items);
}
#endregion
#region ISourceBlock<TOutput> members
// Links this dataflow block to the provided target.
public IDisposable LinkTo(ITargetBlock<T[]> target, DataflowLinkOptions linkOptions)
{
return m_source.LinkTo(target, linkOptions);
}
// Called by a target to reserve a message previously offered by a source
// but not yet consumed by this target.
bool ISourceBlock<T[]>.ReserveMessage(DataflowMessageHeader messageHeader,
ITargetBlock<T[]> target)
{
return m_source.ReserveMessage(messageHeader, target);
}
// Called by a target to consume a previously offered message from a source.
T[] ISourceBlock<T[]>.ConsumeMessage(DataflowMessageHeader messageHeader,
ITargetBlock<T[]> target, out bool messageConsumed)
{
return m_source.ConsumeMessage(messageHeader,
target, out messageConsumed);
}
// Called by a target to release a previously reserved message from a source.
void ISourceBlock<T[]>.ReleaseReservation(DataflowMessageHeader messageHeader,
ITargetBlock<T[]> target)
{
m_source.ReleaseReservation(messageHeader, target);
}
#endregion
#region ITargetBlock<TInput> members
// Asynchronously passes a message to the target block, giving the target the
// opportunity to consume the message.
DataflowMessageStatus ITargetBlock<T>.OfferMessage(DataflowMessageHeader messageHeader,
T messageValue, ISourceBlock<T> source, bool consumeToAccept)
{
return m_target.OfferMessage(messageHeader,
messageValue, source, consumeToAccept);
}
#endregion
#region IDataflowBlock members
// Gets a Task that represents the completion of this dataflow block.
public Task Completion { get { return m_source.Completion; } }
// Signals to this target block that it should not accept any more messages,
// nor consume postponed messages.
public void Complete()
{
m_target.Complete();
}
public void Fault(Exception error)
{
m_target.Fault(error);
}
#endregion
}
// Demonstrates usage of the sliding window block by sending the provided
// values to the provided propagator block and printing the output of
// that block to the console.
static void DemonstrateSlidingWindow<T>(IPropagatorBlock<T, T[]> slidingWindow,
IEnumerable<T> values)
{
// Create an action block that prints arrays of data to the console.
string windowComma = string.Empty;
var printWindow = new ActionBlock<T[]>(window =>
{
Console.Write(windowComma);
Console.Write("{");
string comma = string.Empty;
foreach (T item in window)
{
Console.Write(comma);
Console.Write(item);
comma = ",";
}
Console.Write("}");
windowComma = ", ";
});
// Link the printer block to the sliding window block.
slidingWindow.LinkTo(printWindow);
// Set the printer block to the completed state when the sliding window
// block completes.
slidingWindow.Completion.ContinueWith(delegate { printWindow.Complete(); });
// Print an additional newline to the console when the printer block completes.
var completion = printWindow.Completion.ContinueWith(delegate { Console.WriteLine(); });
// Post the provided values to the sliding window block and then wait
// for the sliding window block to complete.
foreach (T value in values)
{
slidingWindow.Post(value);
}
slidingWindow.Complete();
// Wait for the printer to complete and perform its final action.
completion.Wait();
}
static void Main(string[] args)
{
Console.Write("Using the DataflowBlockExtensions.Encapsulate method ");
Console.WriteLine("(T=int, windowSize=3):");
DemonstrateSlidingWindow(CreateSlidingWindow<int>(3), Enumerable.Range(0, 10));
Console.WriteLine();
var slidingWindow = new SlidingWindowBlock<char>(4);
Console.Write("Using SlidingWindowBlock<T> ");
Console.WriteLine("(T=char, windowSize={0}):", slidingWindow.WindowSize);
DemonstrateSlidingWindow(slidingWindow, from n in Enumerable.Range(65, 10)
select (char)n);
}
}
/* Output:
Using the DataflowBlockExtensions.Encapsulate method (T=int, windowSize=3):
{0,1,2}, {1,2,3}, {2,3,4}, {3,4,5}, {4,5,6}, {5,6,7}, {6,7,8}, {7,8,9}
Using SlidingWindowBlock<T> (T=char, windowSize=4):
{A,B,C,D}, {B,C,D,E}, {C,D,E,F}, {D,E,F,G}, {E,F,G,H}, {F,G,H,I}, {G,H,I,J}
*/
Imports System.Collections.Generic
Imports System.Linq
Imports System.Threading.Tasks
Imports System.Threading.Tasks.Dataflow
' Demonstrates how to create a custom dataflow block type.
Friend Class Program
' Creates a IPropagatorBlock<T, T[]> object propagates data in a
' sliding window fashion.
Public Shared Function CreateSlidingWindow(Of T)(ByVal windowSize As Integer) As IPropagatorBlock(Of T, T())
' Create a queue to hold messages.
Dim queue = New Queue(Of T)()
' The source part of the propagator holds arrays of size windowSize
' and propagates data out to any connected targets.
Dim source = New BufferBlock(Of T())()
' The target part receives data and adds them to the queue.
Dim target = New ActionBlock(Of T)(Sub(item)
' Add the item to the queue.
' Remove the oldest item when the queue size exceeds the window size.
' Post the data in the queue to the source block when the queue size
' equals the window size.
queue.Enqueue(item)
If queue.Count > windowSize Then
queue.Dequeue()
End If
If queue.Count = windowSize Then
source.Post(queue.ToArray())
End If
End Sub)
' When the target is set to the completed state, propagate out any
' remaining data and set the source to the completed state.
target.Completion.ContinueWith(Sub()
If queue.Count > 0 AndAlso queue.Count < windowSize Then
source.Post(queue.ToArray())
End If
source.Complete()
End Sub)
' Return a IPropagatorBlock<T, T[]> object that encapsulates the
' target and source blocks.
Return DataflowBlock.Encapsulate(target, source)
End Function
' Propagates data in a sliding window fashion.
Public Class SlidingWindowBlock(Of T)
Implements IPropagatorBlock(Of T, T()), IReceivableSourceBlock(Of T())
' The size of the window.
Private ReadOnly m_windowSize As Integer
' The target part of the block.
Private ReadOnly m_target As ITargetBlock(Of T)
' The source part of the block.
Private ReadOnly m_source As IReceivableSourceBlock(Of T())
' Constructs a SlidingWindowBlock object.
Public Sub New(ByVal windowSize As Integer)
' Create a queue to hold messages.
Dim queue = New Queue(Of T)()
' The source part of the propagator holds arrays of size windowSize
' and propagates data out to any connected targets.
Dim source = New BufferBlock(Of T())()
' The target part receives data and adds them to the queue.
Dim target = New ActionBlock(Of T)(Sub(item)
' Add the item to the queue.
' Remove the oldest item when the queue size exceeds the window size.
' Post the data in the queue to the source block when the queue size
' equals the window size.
queue.Enqueue(item)
If queue.Count > windowSize Then
queue.Dequeue()
End If
If queue.Count = windowSize Then
source.Post(queue.ToArray())
End If
End Sub)
' When the target is set to the completed state, propagate out any
' remaining data and set the source to the completed state.
target.Completion.ContinueWith(Sub()
If queue.Count > 0 AndAlso queue.Count < windowSize Then
source.Post(queue.ToArray())
End If
source.Complete()
End Sub)
m_windowSize = windowSize
m_target = target
m_source = source
End Sub
' Retrieves the size of the window.
Public ReadOnly Property WindowSize() As Integer
Get
Return m_windowSize
End Get
End Property
'#Region "IReceivableSourceBlock<TOutput> members"
' Attempts to synchronously receive an item from the source.
Public Function TryReceive(ByVal filter As Predicate(Of T()), <System.Runtime.InteropServices.Out()> ByRef item() As T) As Boolean Implements IReceivableSourceBlock(Of T()).TryReceive
Return m_source.TryReceive(filter, item)
End Function
' Attempts to remove all available elements from the source into a new
' array that is returned.
Public Function TryReceiveAll(<System.Runtime.InteropServices.Out()> ByRef items As IList(Of T())) As Boolean Implements IReceivableSourceBlock(Of T()).TryReceiveAll
Return m_source.TryReceiveAll(items)
End Function
'#End Region
#Region "ISourceBlock<TOutput> members"
' Links this dataflow block to the provided target.
Public Function LinkTo(ByVal target As ITargetBlock(Of T()), ByVal linkOptions As DataflowLinkOptions) As IDisposable Implements ISourceBlock(Of T()).LinkTo
Return m_source.LinkTo(target, linkOptions)
End Function
' Called by a target to reserve a message previously offered by a source
' but not yet consumed by this target.
Private Function ReserveMessage(ByVal messageHeader As DataflowMessageHeader, ByVal target As ITargetBlock(Of T())) As Boolean Implements ISourceBlock(Of T()).ReserveMessage
Return m_source.ReserveMessage(messageHeader, target)
End Function
' Called by a target to consume a previously offered message from a source.
Private Function ConsumeMessage(ByVal messageHeader As DataflowMessageHeader, ByVal target As ITargetBlock(Of T()), ByRef messageConsumed As Boolean) As T() Implements ISourceBlock(Of T()).ConsumeMessage
Return m_source.ConsumeMessage(messageHeader, target, messageConsumed)
End Function
' Called by a target to release a previously reserved message from a source.
Private Sub ReleaseReservation(ByVal messageHeader As DataflowMessageHeader, ByVal target As ITargetBlock(Of T())) Implements ISourceBlock(Of T()).ReleaseReservation
m_source.ReleaseReservation(messageHeader, target)
End Sub
#End Region
#Region "ITargetBlock<TInput> members"
' Asynchronously passes a message to the target block, giving the target the
' opportunity to consume the message.
Private Function OfferMessage(ByVal messageHeader As DataflowMessageHeader, ByVal messageValue As T, ByVal source As ISourceBlock(Of T), ByVal consumeToAccept As Boolean) As DataflowMessageStatus Implements ITargetBlock(Of T).OfferMessage
Return m_target.OfferMessage(messageHeader, messageValue, source, consumeToAccept)
End Function
#End Region
#Region "IDataflowBlock members"
' Gets a Task that represents the completion of this dataflow block.
Public ReadOnly Property Completion() As Task Implements IDataflowBlock.Completion
Get
Return m_source.Completion
End Get
End Property
' Signals to this target block that it should not accept any more messages,
' nor consume postponed messages.
Public Sub Complete() Implements IDataflowBlock.Complete
m_target.Complete()
End Sub
Public Sub Fault(ByVal [error] As Exception) Implements IDataflowBlock.Fault
m_target.Fault([error])
End Sub
#End Region
End Class
' Demonstrates usage of the sliding window block by sending the provided
' values to the provided propagator block and printing the output of
' that block to the console.
Private Shared Sub DemonstrateSlidingWindow(Of T)(ByVal slidingWindow As IPropagatorBlock(Of T, T()), ByVal values As IEnumerable(Of T))
' Create an action block that prints arrays of data to the console.
Dim windowComma As String = String.Empty
Dim printWindow = New ActionBlock(Of T())(Sub(window)
Console.Write(windowComma)
Console.Write("{")
Dim comma As String = String.Empty
For Each item As T In window
Console.Write(comma)
Console.Write(item)
comma = ","
Next item
Console.Write("}")
windowComma = ", "
End Sub)
' Link the printer block to the sliding window block.
slidingWindow.LinkTo(printWindow)
' Set the printer block to the completed state when the sliding window
' block completes.
slidingWindow.Completion.ContinueWith(Sub() printWindow.Complete())
' Print an additional newline to the console when the printer block completes.
Dim completion = printWindow.Completion.ContinueWith(Sub() Console.WriteLine())
' Post the provided values to the sliding window block and then wait
' for the sliding window block to complete.
For Each value As T In values
slidingWindow.Post(value)
Next value
slidingWindow.Complete()
' Wait for the printer to complete and perform its final action.
completion.Wait()
End Sub
Shared Sub Main(ByVal args() As String)
Console.Write("Using the DataflowBlockExtensions.Encapsulate method ")
Console.WriteLine("(T=int, windowSize=3):")
DemonstrateSlidingWindow(CreateSlidingWindow(Of Integer)(3), Enumerable.Range(0, 10))
Console.WriteLine()
Dim slidingWindow = New SlidingWindowBlock(Of Char)(4)
Console.Write("Using SlidingWindowBlock<T> ")
Console.WriteLine("(T=char, windowSize={0}):", slidingWindow.WindowSize)
DemonstrateSlidingWindow(slidingWindow, _
From n In Enumerable.Range(65, 10) _
Select ChrW(n))
End Sub
End Class
' Output:
'Using the DataflowBlockExtensions.Encapsulate method (T=int, windowSize=3):
'{0,1,2}, {1,2,3}, {2,3,4}, {3,4,5}, {4,5,6}, {5,6,7}, {6,7,8}, {7,8,9}
'
'Using SlidingWindowBlock<T> (T=char, windowSize=4):
'{A,B,C,D}, {B,C,D,E}, {C,D,E,F}, {D,E,F,G}, {E,F,G,H}, {F,G,H,I}, {G,H,I,J}
'
Se även
Samarbeta med oss på GitHub
Källan för det här innehållet finns på GitHub, där du även kan skapa och granska ärenden och pull-begäranden. Se vår deltagarguide för mer information.
Feedback
Kommer snart: Under hela 2024 kommer vi att fasa ut GitHub-problem som feedbackmekanism för innehåll och ersätta det med ett nytt feedbacksystem. Mer information finns i: https://aka.ms/ContentUserFeedback.
Skicka och visa feedback för