Create and manage dial plans

Artikel
02/22/2024
Gäller för:

Microsoft Teams

After you plan the dial plans for your organization and figured out all the normalization rules that need to be created for voice routing, you're ready to create the dial plans. With an administrator account that has a valid Teams license, you can use the Microsoft Teams admin center or Windows PowerShell to create and manage dial plans.

Using the Microsoft Teams admin center

Create a dial plan

In the left navigation of the Microsoft Teams admin center, go to Voice > Dial plans.
Select Add, and then enter a name and description for the dial plan.
Under Normalization rules, configure and associate one or more normalization rules for the dial plan. Each dial plan must have at least one normalization rule associated with it. To do this, do one or more of the following:
- To create a new normalization rule and associate it with the dial plan, select Add, and then define the rule.
- To edit a normalization rule that's already associated with the dial plan, select the rule by clicking to the left of the rule name, and then select Edit. Make the changes you want, and then select Save.
- To remove a normalization rule from the dial plan, select the rule by clicking to the left of the rule name, and then select Delete.
Arrange the normalization rules in the order that you want. Select Move up or Move down to change the position of rules in the list.

Note

Teams traverses the list of normalization rules from the top down and uses the first rule that matches the dialed number. If you set up a dial plan so that a dialed number can match more than one normalization rule, make sure the more restrictive rules are sorted above the less restrictive ones. If you set up a dial plan that normalizes a dialed number without a "+", the calling service will attempt to normalize the number again using Tenant and regional dial plan rules. To avoid double normalization, it's recommended that all normalization rules result in numbers starting with a "+". Direct Routing customers can use trunk translation rules to remove the "+" if required.
Select Save.
If you want to test the dial plan, under Test dial plan, enter a phone number, and then select Test.

Edit a dial plan

In the left navigation of the Microsoft Teams admin center, go to Voice > Dial plans.
Select the dial plan by clicking to the left of the dial plan name, and then select Edit.
Make the changes that you want, and then select Save.

Assign a dial plan to users

You assign a dial plan in the same way you assign policies. You can assign a policy directly to users, either individually or at scale through a batch assignment (if supported for the policy type), or to a group that the users are members of (if supported for the policy type).To learn about the different ways that you can assign policies to users, see Assign policies to your users in Teams.

Using PowerShell

Start PowerShell

Open a Windows PowerShell command prompt and run the following commands:

  # When using Teams PowerShell Module

   Import-Module MicrosoftTeams
   $credential = Get-Credential
   Connect-MicrosoftTeams -Credential $credential

Create and manage your dial plans

You can either use a single cmdlet or a PowerShell script to create and manage tenant dial plans.

Using single cmdlets

To create a new dial plan, run the following script:

New-CsTenantDialPlan -Identity RedmondDialPlan -Description "Dial Plan for Redmond" -NormalizationRules <pslistmodifier> -SimpleName "Dial-Plan-for-Redmond"

For other examples and parameters, see New-CsTenantDialPlan.

To edit the settings of an existing dial plan, run the following script:
```
Set-CsTenantDialPlan -Identity RedmondDialPlan  -NormalizationRules <pslistmodifier> -SimpleName "Dial-Plan-for-Redmond"
```
For other examples and parameters, see Set-CsTenantDialPlan.
To add users to a dial plan, run the following script:
```
Grant-CsTenantDialPlan -Identity amos.marble@contoso.com -PolicyName RedmondDialPlan
```
For other examples and parameters, see Grant-CsTenantDialPlan.
To view the settings on a dial plan, run the following script:
```
Get-CsTenantDialPlan -Identity RedmondDialPlan
```
For other examples and parameters, see Get-CsTenantDialPlan.
To delete a dial plan, run the following script:
```
Remove-CsTenantDialPlan -Identity RedmondDialPlan -force
```
For other examples and parameters, see Remove-CsTenantDialPlan.
To see the settings of the effective dial plan, run the following script:
```
Get-CsEffectiveTenantDialPlan -Identity amos.marble@contoso.com
```
For other examples and parameters, see Get-CsEffectiveTenantDialPlan.
To test the effective settings of a dial plan, run:
```
Test-CsEffectiveTenantDialPlan -DialedNumber 14255550199 -Identity amos.marble@contoso.com
```
For other examples and parameters, see Test-CsEffectiveTenantDialPlan.

Using a PowerShell script

Run this script to delete a normalization rule that's associated with a tenant dial plan without needing to delete the tenant dial plan first:

$b1=New-CsVoiceNormalizationRule -Identity Global/NR4 -InMemory
Set-CsTenantDialPlan -Identity RedmondDialPlan -NormalizationRules @{add=$b1}
(Get-CsTenantDialPlan -Identity RedmondDialPlan).NormalizationRules
$b2=New-CsVoiceNormalizationRule -Identity Global/NR4 -InMemory
Set-CsTenantDialPlan -Identity RedmondDialPlan -NormalizationRules @{remove=$b2}

Run this script to add the following normalization rule to the existing tenant dial plan named RedmondDialPlan:

$nr1=New-CsVoiceNormalizationRule -Parent Global -Description 'Organization extension dialing' -Pattern '^(\\d{3})$' -Translation '+14255551$1' -Name NR1 -IsInternalExtension $false -InMemory
Set-CsTenantDialPlan -Identity RedmondDialPlan -NormalizationRules @{add=$nr1}

Run this script to remove the following normalization rule from the existing tenant dial plan named RedmondDialPlan:

$nr1=New-CsVoiceNormalizationRule -Identity Global/NR1 -InMemory
Set-CsTenantDialPlan -Identity RedmondDialPlan -NormalizationRules @{remove=$nr1}

Run the following script when you want to also examine the existing normalization rules, determine which one you want to delete, and then use its index to remove it. The array of normalization rules starts with index 0. We would like to remove the 3-digit normalization rule, so that is index 1.

(Get-CsTenantDialPlan RedmondDialPlan).NormalizationRules
Description         : 4-digit
Pattern             : ^(\\d{4})$
Translation         : +1426666$1
Name                : NR2
IsInternalExtension : False

Description         : 3-digit
Pattern             : ^(\\d{3})$
Translation         : +14255551$1
Name                : NR12
IsInternalExtension : False

$nr1=(Get-CsTenantDialPlan RedmondDialPlan).NormalizationRules[1]
Set-CsTenantDialPlan -Identity RedmondDialPlan -NormalizationRules @{remove=$nr1}

Run this script to find all users who have been granted the RedmondDialPlan tenant dial plan.

Get-CsOnlineUser | Where-Object {$_.TenantDialPlan -eq "RedmondDialPlan"}

Run this script to remove any assigned TenantDialPlan from all users who have a HostingProvider of sipfed.online.lync.com.

Get-CsOnlineUser -Filter {HostingProvider -eq "sipfed.online.lync.com"} | Grant-CsTenantDialPlan -policyname $null

Run these to add the existing on-premises dial plan named OPDP1 as a tenant dial plan for your organization. You need to first save the on-premises dial plan to an .xml file, and then use it to create the new tenant dial plan.

Run this script in Skype for Business Server Management Shell on-premises to save the on-premises dial plan to the .xml file.
```
$DPName = "OPDP1"
$DPFileName = "dialplan.xml"
Get-CsDialplan $DPName | Export-Clixml $DPFileName
```

Run this script in Teams PowerShell Module online to create the new tenant dial plan.

$DPFileName = "dialplan.xml"
$dp = Import-Clixml $DPFileName
$NormRules = @()
ForEach($nr in $dp.NormalizationRules)
{
 $id1 = "Global/" + $nr.Name
 $nr2 = New-CsVoiceNormalizationRule -Identity $id1 -Description $nr.Description -Pattern $nr.Pattern -Translation $nr.Translation -IsInternalExtension $nr.IsInternalExtension -InMemory
 $NormRules += $nr2
}
New-CsTenantDialPlan -Identity $dp.SimpleName -Description $dp.Description -SimpleName $dp.SimpleName -NormalizationRules $NormRules

Dela via

Create and manage dial plans

Using the Microsoft Teams admin center

Create a dial plan

Edit a dial plan

Assign a dial plan to users

Using PowerShell

Start PowerShell

Create and manage your dial plans

Using single cmdlets

Using a PowerShell script

Feedback

Ytterligare resurser

Dela via

Create and manage dial plans

Using the Microsoft Teams admin center

Create a dial plan

Edit a dial plan

Assign a dial plan to users

Using PowerShell

Start PowerShell

Create and manage your dial plans

Using single cmdlets

Using a PowerShell script

Related articles

Feedback

Ytterligare resurser