Add-AzLoadBalancerRuleConfig
Adds a rule configuration to a load balancer.
Syntax
Add-AzLoadBalancerRuleConfig
-LoadBalancer <PSLoadBalancer>
-Name <String>
[-Protocol <String>]
[-LoadDistribution <String>]
[-FrontendPort <Int32>]
[-BackendPort <Int32>]
[-IdleTimeoutInMinutes <Int32>]
[-EnableFloatingIP]
[-EnableTcpReset]
[-DisableOutboundSNAT]
[-FrontendIpConfiguration <PSFrontendIPConfiguration>]
[-BackendAddressPool <PSBackendAddressPool[]>]
[-Probe <PSProbe>]
[-DefaultProfile <IAzureContextContainer>]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-AzLoadBalancerRuleConfig
-LoadBalancer <PSLoadBalancer>
-Name <String>
[-Protocol <String>]
[-LoadDistribution <String>]
[-FrontendPort <Int32>]
[-BackendPort <Int32>]
[-IdleTimeoutInMinutes <Int32>]
[-EnableFloatingIP]
[-EnableTcpReset]
[-DisableOutboundSNAT]
[-FrontendIpConfigurationId <String>]
[-BackendAddressPoolId <String[]>]
[-ProbeId <String>]
[-DefaultProfile <IAzureContextContainer>]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Add-AzLoadBalancerRuleConfig cmdlet adds a rule configuration to an Azure load balancer.
Examples
Example 1: Add a rule configuration to a load balancer
$slb = Get-AzLoadBalancer -Name "MyLoadBalancer" -ResourceGroupName "MyResourceGroup"
$slb | Add-AzLoadBalancerRuleConfig -Name "NewRule" -FrontendIPConfiguration $slb.FrontendIpConfigurations[0] -Protocol "Tcp" -FrontendPort 3350 -BackendPort 3350 -EnableFloatingIP
$slb | Set-AzLoadBalancerThe first command gets the load balancer named MyLoadBalancer, and then stores it in the variable $slb. The second command uses the pipeline operator to pass the load balancer in $slb to Add-AzLoadBalancerRuleConfig, which adds the rule configuration named NewRule. The third command will update the load balancer in azure with the new Load Balancer Rule Config.
Example 2: Add a rule configuration with two backend address pools to a load balancer
$slb = Get-AzLoadBalancer -Name "MyLoadBalancer" -ResourceGroupName "MyResourceGroup"
$MyBackendPool1 = Get-AzLoadBalancerBackendAddressPool -ResourceGroupName $resourceGroup -LoadBalancerName $MyLoadBalancer -Name $backendPool1Name
$MyBackendPool2 = Get-AzLoadBalancerBackendAddressPool -ResourceGroupName $resourceGroup -LoadBalancerName $MyLoadBalancer -Name $backendPool2Name
$slb | Add-AzLoadBalancerRuleConfig -Name "NewRule" -FrontendIPConfiguration $slb.FrontendIpConfigurations[0] -Protocol All -FrontendPort 0 -BackendPort 0 -BackendAddressPool $MyBackendPool1, $MyBackendPool2
$slb | Set-AzLoadBalancerThis enables Gateway Load Balancer to have multiple backend pools The first command will get the load balancer named MyLoadBalancer, and then stores it in the variable $slb. The second and thrid command will get the backend address pools to be added the rule The forth command will add a new rule with configured backend pools the fifth command will update the load balancer in azure with the new Load Balancer Rule Config.
Parameters
-BackendAddressPool
Specifies the backend address pool to associate with a load balancer rule configuration.
| Type: | PSBackendAddressPool[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-BackendAddressPoolId
Specifies the ID of a BackendAddressPool object to associate with a load balancer rule configuration.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-BackendPort
Specifies the backend port for traffic that is matched by a load balancer rule configuration.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DefaultProfile
The credentials, account, tenant, and subscription used for communication with azure.
| Type: | IAzureContextContainer |
| Aliases: | AzContext, AzureRmContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableOutboundSNAT
Configures SNAT for the VMs in the backend pool to use the publicIP address specified in the frontend of the load balancing rule.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableFloatingIP
Indicates that this cmdlet enables a floating IP address for a rule configuration.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableTcpReset
Receive bidirectional TCP Reset on TCP flow idle timeout or unexpected connection termination. This element is only used when the protocol is set to TCP.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FrontendIpConfiguration
Specifies a list of front-end IP addresses to associate with a load balancer rule configuration.
| Type: | PSFrontendIPConfiguration |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-FrontendIpConfigurationId
Specifies the ID for a front-end IP address configuration.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-FrontendPort
Specifies the front-end port that is matched by a load balancer rule configuration.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IdleTimeoutInMinutes
Specifies the length of time, in minutes, that the state of conversations is maintained in the load balancer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-LoadBalancer
Specifies a LoadBalancer object. This cmdlet adds a rule configuration to the load balancer that this parameter specifies.
| Type: | PSLoadBalancer |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-LoadDistribution
Specifies a load distribution.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Specifies the name of the load balancer rule configuration.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Probe
Specifies a probe to associate with a load balancer rule configuration.
| Type: | PSProbe |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ProbeId
Specifies the ID of the probe to associate with a load balancer rule configuration.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Protocol
Specifies the protocol that is matched by a load balancer rule. The acceptable values for this parameter are: Tcp or Udp.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |