Dela via


Autoscaling Application Block Logging

Retired Content

This content and the technology described is outdated and is no longer being maintained. For more information, see Transient Fault Handling.

patterns & practices Developer Center

On this page:
Configuring Logging - Sample Configuration Settings for System Diagnostics Logging, Sample Configuration Settings for Enterprise Library Logging Application Block Logging

The Autoscaling Application Block logs details of all the activities it performs: collecting data points, evaluating rules, submitting scaling requests to Microsoft Azure, and tracking the success or failure of those scaling requests.

You can specify the logging destination in the block's configuration. For details about how to configure the block, see the topic "Entering Configuration Information."

The following table lists the log messages that the Autoscaling Application Block can write.

Note

The logging categories map to the trace sources in the application configuration file.

Message class

Event Type

Event ID

Notes

RulesEvaluation

Error

1001

The block caught an exception while executing a rule action. The message includes details of the exception.

RulesEvaluation

Information

1002

The block matched this rule as a rule to process during the current rules evaluation activity.

RulesEvaluation

Error

1003

The block caught an exception while trying to load the rules from the rules store.

RulesEvaluation

Warning

1004

The block was unable to identify a target (role or scale group) in a rule during the current rules evaluation activity. The message includes the unique ID for the evaluation activity and the name of the unidentified target.

RulesEvaluation

Error

1005

The block was unable to load a scale group or role definition from the service information store during the current rules evaluation activity.

RulesEvaluation

Error

1006

The block did not find any matching constraint rules for the target specified by a reactive rule. The block will not perform any scaling actions on the target.

RulesEvaluation

Information

1007

The block matched multiple constraint rules for a target during the current rules evaluation activity. The message shows the result of reconciling the multiple constraint rules.

RulesEvaluation

Information

1008

The block matched multiple reactive rules that specify absolute values for the change in the number of instances for a target during the current rules evaluation activity. The message shows the result of reconciling the multiple reactive rules.

RulesEvaluation

Information

1009

The block matched multiple reactive rules that specify relative values for the change in the number of instances for a target during the current rules evaluation activity. The message shows the result of reconciling the multiple reactive rules.

RulesEvaluation

Information

1010

The block matched multiple ChangeSetting actions for a target.

RulesEvaluation

Error

1011

The block caught an exception when it tried to evaluate a rule.

RulesEvaluation

Verbose

1013

The block did not scale the roles listed in this message during the current rules evaluation activity because they were recently scaled. They are currently in their cool-down period.

RulesEvaluation

Verbose

1014

The block did not scale the roles listed in this message during the current rules evaluation activity because scale operation happened during the time at the start or end of the hour when the configuration prevents scaling operations from happening.

DataPointsCollection

Error

2001

The block caught an exception while trying to collect data points.

DataPointsCollection

Error

2002

The block caught an exception while trying to write to the data points persistence store.

Scaling

Information

3001

The scaler has received a request to scale one or more targets. The message includes details of the scaling requests.

Scaling

Information

3002

The block is about to submit a scaling request to Azure. The message includes details of the requested scaling operation.

Scaling

Information

3003

The block has submitted a scaling request to Azure. The message includes details of the requested scaling operation.

Scaling

Information

3004

The block will not submit the request for the configuration change to Azure.

Scaling

Error

3005

The hosted service that contains the target that the block is attempting to scale is not currently available to accept scaling requests.

Scaling

Error

3006

The hosted service or deployment slot that contains the target that the block is attempting to scale does not exist.

Scaling

Error

3007

The role that the block is attempting to scale does not exist in the hosted service in Azure.

Scaling

Error

3008

The block caught an exception when it submitted a scale request to Azure. The message includes details of the request that the block submitted.

Scaling

Error

3009

The block could not find the setting in the configuration for the hosted service. The log message identifies the name of the missing setting.

Scaling

Error

3010

The block caught an exception when it attempted to read the deployment information from Azure.

Scaling

Verbose

3011

The scaler determined that no configuration change was required.

Scaling

Verbose

3012

The scaler determined that no instance count change was required.

RulesStore

Error

4001

The block caught an exception while it was polling a configuration file for changes.

RulesStore

Warning

4002

The block could not find the blob when it tried to poll the blob for changes.

RulesStore

Error

4101

The block caught an exception when it tried to load the rules from the rules store. The message includes detailed information about the cause of the exception.

RulesStore

Warning

4102

The block was unable to load the custom action or custom parameter element definitions for a rules store extension.

RulesStore

Error

4201

The block caught an exception when it tried to load the service information from the service information store. The message includes detailed information about the cause of the exception.

Notification

Error

6001

The block caught an exception when it tried to send an SMTP message from a notification action.

OperationsTracking

Information

7001

The block has successfully completed a check on the status of scaling operation. The message provides details of whether the scaling operation completed successfully or not.

OperationsTracking

Error

7002

The block caught an exception when it requested the status of a scaling request from Azure.

OperationsTracking

Error

7003

The block caught an exception when it attempted to read or write a tracking message to the tracking queue.

OperationsTracking

Error

7004

The block caught an exception when it attempted to parse a tracking message from the queue.

Scheduling

Error

8001

The block caught an exception when it attempted to acquire a lease on a blob.

Configuring Logging

The Autoscaling Application Block configuration tool enables you to select a logging implementation for the block. You can use the logging functionality in the System.Diagnostics namespace, or the Enterprise Library Logging Block, or a custom logger. For more information, see the topic "Entering Configuration Information."

The Autoscaling Application Block uses the following logging categories:

  • Autoscaling General
  • Autoscaling Updates

You must configure your logger to process log messages in these categories. If you are using the Enterprise Library Logging Block, you can use the Autoscaling Application Block logging categories in a filter. If you are using system diagnostics logging, you can use the Autoscaling Application Block logging categories as trace sources.

For information about using category filters in the Enterprise Library Logging Block, see "Configuring Logging Filters" on MSDN.

For information about using trace sources in system diagnostics logging, see "How to: Create and Initialize Trace Sources" on MSDN.

Sample Configuration Settings for System Diagnostics Logging

The following snippet shows sample configuration settings from a .config file for using the system diagnostics logger with the Autoscaling Application Block.

<system.diagnostics>
  <sources>
    <source name="Autoscaling General"  switchName="SourceSwitch" 
        switchType="System.Diagnostics.SourceSwitch" >
      <listeners>
        <add name="AzureDiag" />
        <remove name ="Default" />
      </listeners>
    </source>
    <source name="Autoscaling Updates"  switchName="SourceSwitch" 
        switchType="System.Diagnostics.SourceSwitch" >
      <listeners>
        <add name="AzureDiag" />
        <remove name ="Default" />
      </listeners>
    </source>
  </sources>
  <switches>
    <add name="SourceSwitch" 
        value="Verbose, Information, Warning, Error, Critical" />
  </switches>
  <sharedListeners>
    <add type="Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, 
        Microsoft.WindowsAzure.Diagnostics, Version=1.0.0.0, Culture=neutral, 
        PublicKeyToken=31bf3856ad364e35"
        name="AzureDiag"/>
  </sharedListeners>

  <trace>
    <listeners>
      <add 
          type="Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, 
          Microsoft.WindowsAzure.Diagnostics, Version=1.0.0.0, Culture=neutral, 
          PublicKeyToken=31bf3856ad364e35"
          name="AzureDiagnostics">
        <filter type="" />
      </add>
    </listeners>
  </trace>
</system.diagnostics>

Note

To make the sample more readable, the values of the type attributes have been split over multiple lines. In a configuration file, they should not contain any line breaks.

Sample Configuration Settings for Enterprise Library Logging Application Block Logging

The following snippet shows sample configuration settings from a .config file for using the Logging Block logger with the Autoscaling Application Block. These example configures the logger to write to a flat file.

<configSections>
  <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.505.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" />
  ...
</configSections>

...

<loggingConfiguration name="" tracingEnabled="true" defaultCategory="General">
    <listeners>
      <add name="Flat File Trace Listener" 
        type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FlatFileTraceListener,
        Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.505.0, Culture=neutral,
        PublicKeyToken=31bf3856ad364e35"
        listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FlatFileTraceListenerData, 
        Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.505.0, Culture=neutral, 
        PublicKeyToken=31bf3856ad364e35"
        fileName="trace.log" formatter="Text Formatter" />
    </listeners>
    <formatters>
      <add type="Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.TextFormatter, 
        Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.505.0, Culture=neutral, 
        PublicKeyToken=31bf3856ad364e35"
        template="Timestamp: {timestamp}{newline}&#xA;&#xA;Message: {message}{newline}&#xA;&#xA;
        Category: {category}{newline}&#xA;&#xA;Priority: {priority}{newline}&#xA;&#xA;
        EventId: {eventid}{newline}&#xA;&#xA;Severity: {severity}{newline}&#xA;&#xA;
        Title:{title}{newline}&#xA;&#xA;Machine: {localMachine}{newline}&#xA;&#xA;
        App Domain: {localAppDomain}{newline}&#xA;&#xA;ProcessId: {localProcessId}{newline}&#xA;&#xA;
        Process Name: {localProcessName}{newline}&#xA;&#xA;Thread Name: {threadName}{newline}&#xA;&#xA;
        Win32 ThreadId:{win32ThreadId}{newline}&#xA;&#xA;
        Extended Properties: {dictionary({key} - {value}{newline})}"
        name="Text Formatter" />
    </formatters>
    <categorySources>
      <add switchValue="All" name="General">
        <listeners>
          <add name="Flat File Trace Listener" />
        </listeners>
      </add>
    </categorySources>
    <specialSources>
      <allEvents switchValue="All" name="All Events">
        <listeners>
          <add name="Flat File Trace Listener" />
        </listeners>
      </allEvents>
      <notProcessed switchValue="All" name="Unprocessed Category">
        <listeners>
          <add name="Flat File Trace Listener" />
        </listeners>
      </notProcessed>
      <errors switchValue="All" name="Logging Errors &amp; Warnings">
        <listeners>
          <add name="Flat File Trace Listener" />
        </listeners>
      </errors>
    </specialSources>
  </loggingConfiguration>

Note

To make the sample more readable, the values of the type, listenerDataType, and template attributes have been split over multiple lines. In a configuration file, they should not contain any line breaks.

Next Topic | Previous Topic | Home

Last built: June 7, 2012