Install Windows SBS 2011 Standard in migration mode
Utgivet: december 2010
Gäller för: Windows Small Business Server 2011 Standard
You can have only one server on your network that is running Windows SBS, and that server must be a domain controller for the network.
Viktigt
Windows SBS 2011 Standard requires a 64-bit server. Windows SBS 2011 Standard does not support a 32-bit processor architecture.
When you install Windows SBS 2011 Standard in migration mode, the following tasks are accomplished:
Windows SBS 2011 Standard is installed and configured on the Destination Server.
The Destination Server is joined to the existing domain. The Source Server and the Destination Server can be members of the AD DS domain until the migration process is finished. After the migration is finished, you must remove the Source Server from the network within 21 days.
Information An error message is added to the event log each day during the 21 day grace period until you remove the Source Server from your network. The error message says, "Multiple domain controllers running Windows Server 2003 for Small Business Server have been detected in your domain. To prevent this computer from shutting down in the future, you must remove all but one of these from the domain." After the 21 day grace period, the Source Server will shut down. The operations master (also called flexible single master operations or FSMO) roles are transferred from the Source Server to the Destination Server. Operations master roles in AD DS are specialized domain-controller tasks, which are used when standard data-transfer and update methods are inadequate. When the Destination Server becomes a domain controller, it must hold the operations master roles.
The Destination Server becomes a global catalog server. The global catalog server is a domain controller that manages a distributed data repository. It contains a searchable, partial representation of every object in every domain in the AD DS forest.
The Destination Server becomes the site licensing server.
The DHCP Server service is installed and configured on the Destination Server. Only one DHCP Server service can be active in the Windows SBS 2011 Standard network. The responsibility for managing the DHCP Server service is transferred from the Source Server to the Destination Server.
Information Before you start the migration, enable the DHCP Server service on the Source Server. Do not enable the DHCP Server service on the router. Information If you have DHCP with custom configuration on , backup the DHCP configuration so it can be restored on Windows SBS 2011 Standard after migration. For more information about how to move a DHCP database, see article 962355 in the Microsoft Knowledge Base.
To install Windows SBS 2011 Standard on the Destination Server
Turn on the Destination Server and insert Windows SBS 2011 Standard DVD1 in the DVD drive. If you see a message that asks if you want to boot from a CD or DVD, press any key to do so.
Information If the Destination Server does not boot from the DVD, restart the computer and check the BIOS Setup to ensure that DVD-ROM is listed first in the boot sequence. For more information about how to change the BIOS Setup boot sequence, see your hardware manufacturer's documentation. Information If the removable media that contains the answer file is a USB device, you must change the boot order in the BIOS Setup to assure that the server does not attempt to boot to the USB device. The installation wizard loads files into memory.
Verify your language and regional preferences, and then click Next.
Insert the USB device or other removable media that contains the migration answer file in the Destination Server, and then click Install Now.
Information The migration answer file is automatically detected on the root of any drive. If the migration answer file is configured to run the installation in unattended mode, values from the file are used during migration. You will not be prompted for values unless they are invalid or missing from the answer file. Read the license terms. If you accept them, select the I accept the license terms check box, and then click Next.
Information If you do not choose to accept the license terms, the installation does not continue. On the Which type of installation do you want page, click Custom (advanced).
If you need to install drivers for your server hardware, on the Where do you want to install Windows? page, click Drive options (advanced), and then click Load Driver.
To install drivers
Insert the media that contains the drivers, and then click Browse in the Load driver dialog box.
Browse to the location of the drivers, and then click OK.
When you finish installing the drivers, on the Select the driver to be installed page, click Next. This returns you to the Where do you want to install Windows? page.
On the Where do you want to install Windows? page, create and then select the partition where you want to install the operating system.
Information If the hard disk drive that you want to use is not listed, such as a Serial Advanced Technology Attachment (SATA) drive, you must first download the driver for the hard disk drive. Obtain the driver from the manufacturer, and then save it to removable media, such as a USB flash drive. Insert the removable media in your server, click Drive options (advanced), and then click Load Driver. After the driver is loaded and the hard disk drive is listed, complete one of the following steps: - To create a partition from unpartitioned space, click the hard disk drive that you want to partition, click Drive options (advanced), click New, and then type the partition size in the text box. For example, if you use the recommended partition size of 120 gigabytes (GB), type 120000, and then click Apply. After the partition is created, click Next to format the partition.
- To create a partition that uses all of the unpartitioned space, click the hard disk drive that you want to partition, click Drive options (advanced), click New, and then click Apply to accept the default partition size. After the partition is created, click Next to format the partition.
Viktigt
After you finish this step, you cannot change the partition on which you install the operating system.
- To create a partition from unpartitioned space, click the hard disk drive that you want to partition, click Drive options (advanced), click New, and then type the partition size in the text box. For example, if you use the recommended partition size of 120 gigabytes (GB), type 120000, and then click Apply. After the partition is created, click Next to format the partition.
The operating system is installed on the selected partition. After the operating system is installed, the Destination Server restarts.
If the migration answer file is successfully detected, the Verify the clock and time zone settings page is displayed. Click Open Date and Time to verify the clock and time zone settings to check the date, time, and time zone settings. When you are finished, click Next.
Information If the migration answer file is configured for unattended mode, steps 11 through 16 are completed automatically, unless information in the migration answer file is invalid or missing. If the migration answer file is configured for attended mode, the text boxes on the following installation pages are populated with the information that you provided in the migration answer file. If the information is not correct, you can change it before proceeding. On the Source and Destination Server networking information page, verify that the IP addresses of the Source and Destination Servers and the default gateway IP address are correct. If appropriate, select the DHCP is running on the Source Server check box. Then click Next.
On the Source and Destination Server information page, verify that the information about the Source Server, domain administrator account, Destination Server, and certification authority are correct. Then click Next.
Information You cannot change the Destination Server name or the internal domain name after you finish this step. On the Get important updates page, if the Destination Server is connected to the Internet, click Go online and get the most recent installation updates (recommended). If the Destination Server is not connected to the Internet, click Do not get the most recent installation updates. After the installation finishes and you configure Internet access, you can connect to the Internet to get the most recent updates.
If you selected this option, the Connecting your server page is displayed and the most recent installation updates are downloaded.
On the Company information page, verify that the information is correct, and then click Next. The information is used to configure server tools.
The Expanding and installing files page displays the progress of the final installation process. When the Windows SBS 2011 Standard installation finishes, the server restarts.
After the server restarts, the Installation finished page is displayed. Click Start the Migration Wizard to close the page and to start using the Windows SBS 2011 Standard Console. The Home page of the Windows SBS 2011 Standard Console displays Getting Started Tasks.
If there were issues during installation, click View installation issues on the Installation finished page. The Windows SBS 2011 Standard Console displays the Home page with Getting Started Tasks, so that you can start using the Destination Server and resolving the issues.
To complete the migration process, you must migrate settings and data from the Source Server to the Destination Server by using the Migration Wizard. For information about running the Migration Wizard, see Move settings and data to the Destination Server for Windows SBS 2011 Standard migration.
Information You may receive a Program Compatibility warning message for the logon script. Click Cancel to exit the warning message. To fix the issue, you must disable or delete the logon script. For additional information, see Remove legacy Active Directory Group Policy objects and logon settings for Windows SBS 2011 Standard migration.
After the installation finishes, you are automatically logged on with the administrator user account and password that you provided in the migration answer file.
Information |
---|
If the desktop is locked while Windows SBS 2011 Standard is installing, you can unlock it as follows:
|
Information |
---|
To avoid issues when users add printers to their client computers, ensure that the 64-bit drivers for your shared printers are available on the network. |