Dela via

Assign permissions in eDiscovery (preview)

  • Artikel

If you want users to use any of the eDiscovery (preview) capabilities and features in the Microsoft Purview portal, you must assign the users the appropriate permissions. The easiest way to assign roles is to add the user the appropriate role group on the Role groups page in the Microsoft Purview portal. This article describes the permissions required to perform eDiscovery tasks.

Tip

Get started with Microsoft Copilot for Security to explore new ways to work smarter and faster using the power of AI. Learn more about Microsoft Copilot for Security in Microsoft Purview.

eDiscovery roles and role groups

The primary eDiscovery-related role group in Microsoft Purview portal is called eDiscovery Manager. There are two subgroups within this role group:

  • eDiscovery Manager: An eDiscovery Manager can search content locations in the organization and perform various search-related actions such as preview and export search results in eDiscovery (preview). Members can also create and manage cases, add and remove users for a case, create case holds, run searches associated with a case, and access case data. eDiscovery Managers can only access and manage the cases they create. They can't access or manage cases created by other eDiscovery Managers.

    • You can add a mail-enabled security group as a member of the eDiscovery Managers subgroup in the eDiscovery Manager role group by using the Add-RoleGroupMember cmdlet in Security & Compliance PowerShell. For example, you can run the following command to add a mail-enabled security group to the eDiscovery Manager role group.
    Add-RoleGroupMember "eDiscoveryManager" -Member <name of security group>

    • Exchange distribution groups and Microsoft 365 Groups aren't supported. You must use a mail-enabled security group, which you can create in Exchange Online PowerShell by running New-DistributionGroup -Type Security. You can also create a mail-enabled security group (and add members) in the Exchange admin center or in the Microsoft 365 admin center. It might take up to 60 minutes after you create it for a new mail-enabled security group to be available to add to the eDiscovery Managers role group.

    • You can't make a mail-enabled security group an eDiscovery Administrator by using the Add-eDiscoveryCaseAdmin cmdlet in Security & Compliance PowerShell. You can only add individual users as eDiscovery Administrators.

    • You also can't add a mail-enabled security group as a member of a case.

  • eDiscovery Administrator: An eDiscovery Administrator is a member of the eDiscovery Manager role group, and can perform the same content search and case management-related tasks that an eDiscovery Manager can perform. Additionally, an eDiscovery Administrator can:

    • Access all cases that are listed on the eDiscovery area in the Microsoft Purview portal.
    • Configure eDiscovery solution settings.
    • Access process and hold reports scoped to all cases.
    • Access case data for any case in the organization.
    • Manage any eDiscovery case after they add themselves as a member of the case.
    • Remove members from an eDiscovery case. Only an eDiscovery Administrator can remove members from a case. Users who are members of the eDiscovery Manager subgroup can't remove members from a case, even if the user created the case.
    • If a person who is the only member of an eDiscovery case leaves your organization, no one (including members of the Organization Management role group or another member of the eDiscovery Manager role group) can access that eDiscovery case because they aren't a member of a case. In this situation, there would be no way to access the data in the case. But because an eDiscovery Administrator can access all eDiscovery cases in the organization, they can view the case and add themselves or another eDiscovery manager as a member of the case.
    • An eDiscovery Administrator can view and access all eDiscovery cases, they can audit and oversee all cases and associated compliance searches. This functionality can help to prevent any misuse of compliance searches or eDiscovery cases. And because eDiscovery Administrators can access potentially sensitive information in the results of a compliance search, you should limit the number of people who are eDiscovery Administrators.

Note

To analyze a user's data when premium eDiscovery features are enabled, the user must be assigned an Office 365 E5 or Microsoft 365 E5 license. Alternatively, users with an Office 365 E1 or a Office 365 or Microsoft 365 E3 license can be assigned a Microsoft 365 E5 Compliance or Microsoft 365 eDiscovery and Audit add-on license. Administrators, compliance officers, or legal personnel who are assigned to cases as members and use premium eDiscovery features to collect, view, and analyze data don't need an E5 license. For more information about subscriptions and licensing, see the subscription requirements for eDiscovery.

Before you assign permissions

  • You have to be a member of the Organization Management role group or be assigned the Role Management role to assign eDiscovery permissions in the Microsoft Purview portal.
  • You can use the Add-RoleGroupMember cmdlet in Security & Compliance PowerShell to add a mail-enabled security group as a member of the eDiscovery Managers subgroup in the eDiscovery Manager role group. However, you can't add a mail-enabled security group to the eDiscovery Administrators subgroup.

Assign eDiscovery permissions

  1. Go to the Microsoft Purview portal and sign in using an account that can assign permissions.

  2. Navigate to Settings > Role groups.

  3. On the Role groups for Microsoft Purview solutions page, select eDiscovery Manager.

  4. On the eDiscovery Manager flyout pane, do one of the following based on the eDiscovery permissions that you want to assign.

    • Select Edit.
    • On the Manage eDiscovery Manager page, select Choose users or Choose groups.
    • Search and select the user (or users) you want to add as an eDiscovery Manager, and then select Select.
    • Select Next.
    • To assign a user (or users) to the eDiscovery Administrator role group, select Choose users or Choose groups.
    • Search and select the user (or users) you want to add as an eDiscovery Administrator, and then select Select.
    • Select Next.

  5. If the selected users or groups need organization-wide access as part of this role group assignment, go to Step 8.

  6. If the selected users or groups need to be assigned to administrative units, select the users or groups and select Assign admin units.

  7. On the Assign admin units pane, select the checkbox for all the administrative units you want to assign to the users or groups. Select Select.

  8. Select Next and Save to add the users or groups to the role group. Select Done to complete the steps.

Note

You can also use the Add-eDiscoveryCaseAdmin cmdlet to make a user an eDiscovery Administrator. However, the user must be assigned the Case Management role before you can use this cmdlet to make them an eDiscovery Administrator. For more information, see Add-eDiscoveryCaseAdmin.

On the Role groups page in the Microsoft Purview portal, you can also assign users eDiscovery-related permissions by adding them to the Compliance Administrator, Organization Management, and Reviewer role groups. For a description of the eDiscovery-related role-based access control roles assigned to each of these role groups, see Role-based access control roles related to eDiscovery.

The following table lists the eDiscovery-related role-based access control roles in the Microsoft Purview portal, and indicates the built-in role groups that each role is assigned to by default.

Role Compliance Administrator eDiscovery Manager & Administrator Organization Management Reviewer
Case Management Check mark. Check mark. Check mark.
Communication Check mark.
Compliance Search Check mark. Check mark. Check mark.
Custodian Check mark.
Export Check mark.
Hold Check mark. Check mark. Check mark.
Manage review set tags Check mark.
Preview Check mark.
Review Check mark. Check mark
RMS Decrypt Check mark
Search And Purge Check mark

Run the following diagnostic test to check if the Export, Preview, or Search, roles are assigned to the designated admin account.

  1. Select the Help control in the top right of the Microsoft Purview portal. Enter Diag:edisRBACdiag in search (or select this link) to run the eDiscovery RBAC Check test.
  2. In the Run diagnostics section, enter the UPN or email address of the user trying to run an export, preview, or search task.
  3. Select Run Tests. If the user doesn't have the necessary eDiscovery roles, assign the roles to perform the desired task.

The following sections describe each of the eDiscovery-related role-based access control roles listed in the previous table.

Case Management

This role lets users create, edit, delete, and control access to eDiscovery (preview) cases in the Microsoft Purview portal. A user must be assigned the Case Management role before you can use the Add-eDiscoveryCaseAdmin cmdlet to make them an eDiscovery Administrator. For more information, see Get started with eDiscovery (preview).

Communication

This role lets users manage all communications with the users identified in an eDiscovery case. This includes creating hold notifications, hold reminders, and escalations to management. The user can also track user acknowledgment of hold notifications and manage access to the user portal that is used by each user to track communications for the cases where they were included.

This role lets users search mailboxes and public folders, SharePoint sites, OneDrive sites, Skype for Business conversations, Microsoft 365 groups, and Microsoft Teams, and Viva Engage groups. This role allows a user to get an estimate of the search results and create export reports, but other roles are needed to initiate search actions such as previewing, exporting, or deleting search results.

In eDiscovery (preview), users who are assigned the Compliance Search role but don't have the Preview role can preview the results of a search in which the preview action has been initiated by a user who is assigned the Preview role. The user without the Preview role can preview results for up to two weeks after the initial preview action was created.

Similarly, users in eDiscovery (preview) who are assigned the Compliance Search role but don't have the Export role can download the results of a search in which the export action was initiated by a user who is assigned the Export role. The user without the Export role can download the results of a search for up to two weeks after the initial export action was created. After that, they can't download the results unless someone with the Export role restarts the export.

The two-week grace period for previewing and exporting search results (without the corresponding search and export roles) doesn't apply when premium features are enabled in eDiscovery. Users must be assigned the Preview and Export roles to preview and export content when premium eDiscovery features are enabled.

Custodian

Important

This role applies only to the previous eDiscovery experience in the Microsoft Purview compliance portal. This role doesn't grant any permissions for capabilities and features in eDiscovery (preview) in the Microsoft Purview portal.

This role lets users identify and manage custodians for eDiscovery cases managed in the Microsoft Purview compliance portal and to use the information from Microsoft Entra ID and other sources to find data sources associated with custodians. The user can associate other data sources such as mailboxes, SharePoint sites, and Teams with custodians in a case. The user can also place a legal hold on the data sources associated with custodians to preserve content in the context of a case.

Export

The role lets users export search results to a local computer. It also lets them prepare search results for analysis in when premium eDiscovery features are enabled. For more information about exporting search results, see Export search results in eDiscovery (preview).

Hold

This role lets users place content on hold in mailboxes, public folders, sites, Skype for Business conversations, and Microsoft 365 groups. When content is on hold, content owners can still modify or delete the original content, but the content will be preserved until the hold is removed or until the hold duration expires. For more information about holds, see Create a hold in eDiscovery (preview).

Manage review set tags

This role lets users create, edit, and delete review set tags for cases they can access. Users need to at least have the Review role and this role to manage tags during reviews.

Preview

This role lets users view a list of items that were returned from a search. They can also open and view each item from the list to view its contents.

Review

This role lets users access review sets in eDiscovery (preview). Users who are assigned this role can see and open the list of cases that they're members of. After the user accesses an eDiscovery case, they can select Review sets to access case data. This role doesn't allow the user to preview the results of a search that's associated with the case or do other search or case management tasks. Users with this role can only access the data in a review set.

RMS Decrypt

This role lets users view rights-protected email messages when previewing search results and export decrypted rights-protected email messages. This role also lets users view (and export) a file that's encrypted with a Microsoft encryption technology when the encrypted file is attached to an email message that's included in the results of an eDiscovery search. Additionally, this role lets users review and query encrypted email attachments that are added to a review set in eDiscovery (preview). For more information about decryption in eDiscovery, see Decryption in Microsoft 365 eDiscovery tools.

Search And Purge

This role lets users perform bulk removal of data matching the criteria of a search. For more information, see Find and delete email messages in eDiscovery (preview).

Adding role groups as members of eDiscovery cases

You can add role groups as members of eDiscovery cases so that members of the role groups can access and perform tasks in the assigned cases. The roles assigned to the role group define what members of the role group can do. Then adding a role group as a member of the case lets members access and perform those tasks in a specific case.

With this requirement in mind, it's important to know that if a role is added or removed from a role group, then that role group will be automatically removed as a member of any case the role group is a member of. The reason for this is to protect your organization from inadvertently providing additional permissions to members of a case. Similarly, if a role group is deleted, it's removed from all cases it was a member of.

Before you add or remove roles to a role group that may be a member of an eDiscovery case, you can run the following commands in Security & Compliance PowerShell to get a list of cases the role group is a member of. After you update the role group, you add the role group back as a member of those cases.