Not
Åtkomst till den här sidan kräver auktorisering. Du kan prova att logga in eller ändra kataloger.
Åtkomst till den här sidan kräver auktorisering. Du kan prova att ändra kataloger.
Gäller för:
SQL ServerAzure SQL DatabaseAzure SQL Managed InstanceAzure Synapse AnalyticsAnalysplattformssystem (PDW)SQL-databas i Microsoft Fabric
Med OLE DB-drivrutinen för SQL Server kan du ställa in BLOB-data genom att skicka en pekare till ett konsumentlagringsobjekt.
Konsumenten skapar ett lagringsobjekt som innehåller datan och skickar en pekare till detta lagringsobjekt till leverantören. Leverantören läser sedan data från konsumentlagringsobjektet och skriver det till kolumnen BLOB.
För att skicka en pekare till sitt eget lagringsobjekt skapar konsumenten en accessor som binder värdet i kolumnen BLOB. Konsumenten anropar sedan IRowsetChange::SetData eller IRowsetChange::InsertRow-metoden med accessorn som binder BLOB-kolumnen. Den skickar en pekare till ett lagringsgränssnitt på konsumentens lagringsobjekt.
Detta ämne avser funktionalitet som finns tillgänglig med följande funktioner:
IRowset:SetData
ICommand::Utför
IRowsetUppdatering::Uppdatering
Hur man sätter in stora data
För att skicka en pekare till sitt eget lagringsobjekt skapar konsumenten en accessor som binder värdet i BLOB-kolumnen och anropar sedan metoderna IRowsetChange::SetData eller IRowsetChange::InsertRow . För att sätta BLOB-data:
Skapa en DBOBJECT-struktur som beskriver hur BLOB-kolumnen ska nås. Ställ in dwFlag-elementet i DBOBJECT-strukturen till STGM_READ och ställ in iid-elementet till IID_ISequentialStream (gränssnittet som ska exponeras).
Ställ in egenskaperna i DBPROPSET_ROWSET egenskapsgruppen så att radmängden kan uppdateras.
Skapa en uppsättning bindningar (en i varje kolumn) genom att använda en array av DBBINDING-strukturer. Ställ in wType-elementet i DBBINDING-strukturen till DBTYPE_IUNKNOWN, och pObject-elementet att peka på DBOBJECT-strukturen du skapat.
Skapa en accessor med bindningsinformationen i DBBINDINGS-arrayen av strukturer.
Ring GetNextRows för att hämta nästa rader i raduppsättningen. Anropa GetData för att läsa datan från raduppsättningen.
Skapa ett lagringsobjekt som innehåller datan (och även längdindikatorn), och anropa sedan IRowsetChange::SetData (eller IRowsetChange::InsertRow) med accessorn som binder BLOB-kolumnen för att sätta datan.
Example
Detta exempel visar hur man sätter BLOB-data. Exemplet skapar en tabell, lägger till en exempelpost, hämtar den posten i raduppsättningen och sätter sedan värdet på BLOB-fältet:
#define UNICODE
#define DBINITCONSTANTS
#define INITGID
#include <windows.h>
#include <stdio.h>
#include <stddef.h>
#include <iostream.h>
#include <oledb.h>
#include <oledberr.h>
#include <msoledbsql.h>
#define SAFE_RELEASE(pIUnknown) if(pIUnknown) (pIUnknown)->Release();
HRESULT GetCommandObject(REFIID riid, IUnknown** ppIUnknown);
HRESULT CreateTable(ICommandText* pICommandText);
class CSeqStream : public ISequentialStream
{
public:
//Constructors
CSeqStream();
virtual ~CSeqStream();
virtual BOOL Seek(ULONG iPos);
virtual BOOL Clear();
virtual BOOL CompareData(void* pBuffer);
virtual ULONG Length() { return m_cBufSize; };
virtual operator void* const() { return m_pBuffer; };
STDMETHODIMP_(ULONG) AddRef(void);
STDMETHODIMP_(ULONG) Release(void);
STDMETHODIMP QueryInterface(REFIID riid, LPVOID *ppv);
STDMETHODIMP Read(
/* [out] */ void __RPC_FAR *pv,
/* [in] */ ULONG cb,
/* [out] */ ULONG __RPC_FAR *pcbRead);
STDMETHODIMP Write(
/* [in] */ const void __RPC_FAR *pv,
/* [in] */ ULONG cb,
/* [out]*/ ULONG __RPC_FAR *pcbWritten);
protected:
//Data
private:
ULONG m_cRef; // reference count
void* m_pBuffer; // buffer
ULONG m_cBufSize; // buffer size
ULONG m_iPos; // current index position in the buffer
};
//class implementation
CSeqStream::CSeqStream()
{
m_iPos = 0;
m_cRef = 0;
m_pBuffer = NULL;
m_cBufSize = 0;
//The constructor AddRef's
AddRef();
}
CSeqStream::~CSeqStream()
{
//Shouldn't have any references left
// ASSERT(m_cRef == 0);
CoTaskMemFree(m_pBuffer);
}
ULONG CSeqStream::AddRef(void)
{
return ++m_cRef;
}
ULONG CSeqStream::Release(void)
{
// ASSERT(m_cRef);
if(--m_cRef)
return m_cRef;
delete this;
return 0;
}
HRESULT CSeqStream::QueryInterface(REFIID riid, void** ppv)
{
// ASSERT(ppv);
*ppv = NULL;
if (riid == IID_IUnknown)
*ppv = this;
if (riid == IID_ISequentialStream)
*ppv = this;
if(*ppv)
{
((IUnknown*)*ppv)->AddRef();
return S_OK;
}
return E_NOINTERFACE;
}
BOOL CSeqStream::Seek(ULONG iPos)
{
// Make sure the desired position is within the buffer.
// ASSERT(iPos == 0 || iPos < m_cBufSize);
// Reset the current buffer position.
m_iPos = iPos;
return TRUE;
}
BOOL CSeqStream::Clear()
{
//Frees the buffer
m_iPos = 0;
m_cBufSize = 0;
CoTaskMemFree(m_pBuffer);
m_pBuffer = NULL;
return TRUE;
}
BOOL CSeqStream::CompareData(void* pBuffer)
{
// ASSERT(pBuffer);
// Quick and easy way to compare user buffer with the stream.
return memcmp(pBuffer, m_pBuffer, m_cBufSize)==0;
}
HRESULT CSeqStream::Read(void *pv, ULONG cb, ULONG* pcbRead)
{
//Parameter checking
if(pcbRead)
*pcbRead = 0;
if(!pv)
return STG_E_INVALIDPOINTER;
if(cb == 0)
return S_OK;
// Actual code.
ULONG cBytesLeft = m_cBufSize - m_iPos;
ULONG cBytesRead = cb > cBytesLeft ? cBytesLeft : cb;
// If no more bytes to retrieve return.
if(cBytesLeft == 0)
return S_FALSE;
// Copy to users buffer the number of bytes requested or remaining.
memcpy_s(pv, sizeof(pv), (void*)((BYTE*)m_pBuffer + m_iPos), cBytesRead);
m_iPos += cBytesRead;
if(pcbRead)
*pcbRead = cBytesRead;
if(cb != cBytesRead)
return S_FALSE;
return S_OK;
}
HRESULT CSeqStream::Write(const void *pv, ULONG cb, ULONG* pcbWritten)
{
// Parameter checking.
if(!pv)
return STG_E_INVALIDPOINTER;
if(pcbWritten)
*pcbWritten = 0;
if(cb == 0)
return S_OK;
// Enlarge the current buffer.
m_cBufSize += cb;
// Need to append to the end of the stream.
m_pBuffer = CoTaskMemRealloc(m_pBuffer, m_cBufSize);
memcpy_s((void*)((BYTE*)m_pBuffer + m_iPos), sizeof((void*)((BYTE*)m_pBuffer + m_iPos)), pv, cb);
// m_iPos += cb;
if(pcbWritten)
*pcbWritten = cb;
return S_OK;
}
//...........................................................
void main()
{
CoInitialize(NULL);
DBOBJECT ObjectStruct;
ObjectStruct.dwFlags = STGM_READ;
ObjectStruct.iid = IID_ISequentialStream;
struct BLOBDATA
{
DBSTATUS dwStatus;
DWORD dwLength;
ISequentialStream* pISeqStream;
};
BLOBDATA BLOBGetData;
BLOBDATA BLOBSetData;
const ULONG cBindings = 1;
DBBINDING rgBindings[cBindings];
HRESULT hr = S_OK;
IAccessor* pIAccessor = NULL;
ICommandText* pICommandText = NULL;
ICommandProperties* pICommandProperties = NULL;
IRowsetChange* pIRowsetChange = NULL;
IRowset* pIRowset = NULL;
CSeqStream* pMySeqStream = NULL;
ULONG cRowsObtained = 0;
HACCESSOR hAccessor = DB_NULL_HACCESSOR;
DBBINDSTATUS rgBindStatus[cBindings];
HROW* rghRows = NULL;
const ULONG cPropSets = 1;
DBPROPSET rgPropSets[cPropSets];
const ULONG cProperties = 1;
DBPROP rgProperties[cProperties];
const ULONG cBytes = 10;
BYTE pBuffer[cBytes];
ULONG cBytesRead = 0;
BYTE pReadData[cBytes]; //read BLOB data in this array
memset(pReadData, 0xAA, cBytes);
BYTE pWriteData[cBytes]; //write BLOB data from this array
memset(pWriteData, 'D', cBytes);
// Get the Command object.
hr = GetCommandObject(IID_ICommandText,
(IUnknown**)&pICommandText);
if (FAILED(hr))
{
cout << "Failed to get ICommandText interface.\n";
// Release any references and return.
goto Exit;
} //end if
// Create table with image column and index.
hr = CreateTable(pICommandText);
if (FAILED(hr))
{
cout << "Failed to create table.\n";
// Release any references and return.
goto Exit;
} //end if
/*
Set the DBPROPSET structure. It is used to pass an array
of DBPROP structures to SetProperties().
*/
rgPropSets[0].guidPropertySet = DBPROPSET_ROWSET;
rgPropSets[0].cProperties = cProperties;
rgPropSets[0].rgProperties = rgProperties;
// Now set properties in the property group (DBPROPSET_ROWSET).
rgPropSets[0].rgProperties[0].dwPropertyID = DBPROP_UPDATABILITY;
rgPropSets[0].rgProperties[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgPropSets[0].rgProperties[0].dwStatus = DBPROPSTATUS_OK;
rgPropSets[0].rgProperties[0].colid = DB_NULLID;
rgPropSets[0].rgProperties[0].vValue.vt = VT_I4;
V_I4(&rgPropSets[0].rgProperties[0].vValue) = DBPROPVAL_UP_CHANGE;
// Set the rowset properties.
hr = pICommandText->QueryInterface(IID_ICommandProperties,
(void **)&pICommandProperties);
if (FAILED(hr))
{
cout << "Failed to get ICommandProperties to set rowset properties.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pICommandProperties->SetProperties(cPropSets, rgPropSets);
if (FAILED(hr))
{
cout << "Execute failed to set rowset properties.\n";
// Release any references and return.
goto Exit;
} //end if
// Execute a command (SELECT * FROM TestISeqStream).
hr = pICommandText->SetCommandText(DBGUID_DBSQL,
L"SELECT * FROM TestISeqStream");
if (FAILED(hr))
{
cout << "Failed to set command text SELECT * FROM.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pICommandText->Execute(NULL, IID_IRowsetChange, NULL, NULL,
(IUnknown**)&pIRowsetChange);
if (FAILED(hr))
{
cout << "Failed to execute the command SELECT * FROM.\n";
// Release any references and return.
goto Exit;
} //end if
// Fill the DBBINDINGS array.
rgBindings[0].iOrdinal = 2; //ordinal position
rgBindings[0].obValue = offsetof(BLOBDATA, pISeqStream);
rgBindings[0].obLength = offsetof(BLOBDATA, dwLength);
rgBindings[0].obStatus = offsetof(BLOBDATA, dwStatus);
rgBindings[0].pTypeInfo = NULL;
rgBindings[0].pObject = &ObjectStruct;
rgBindings[0].pBindExt = NULL;
rgBindings[0].dwPart = DBPART_VALUE | DBPART_STATUS | DBPART_LENGTH;
rgBindings[0].dwMemOwner = DBMEMOWNER_CLIENTOWNED;
rgBindings[0].eParamIO = DBPARAMIO_NOTPARAM;
rgBindings[0].cbMaxLen = 0;
rgBindings[0].dwFlags = 0;
rgBindings[0].wType = DBTYPE_IUNKNOWN;
rgBindings[0].bPrecision = 0;
rgBindings[0].bScale = 0;
// Create an accessor using the binding information.
hr = pIRowsetChange->QueryInterface(IID_IAccessor,
(void**)&pIAccessor);
if (FAILED(hr))
{
cout << "Failed to get IAccessor interface.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pIAccessor->CreateAccessor(DBACCESSOR_ROWDATA,
cBindings,
rgBindings,
sizeof(BLOBDATA),
&hAccessor,
rgBindStatus);
if (FAILED(hr))
{
cout << "Failed to create an accessor.\n";
// Release any references and return.
goto Exit;
} //end if
// Now get the first row.
hr = pIRowsetChange->QueryInterface(IID_IRowset,
(void **)&pIRowset);
if (FAILED(hr))
{
cout << "Failed to get IRowset interface.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pIRowset->GetNextRows(NULL,
0,
1,
&cRowsObtained,
&rghRows);
hr = pIRowset->GetData(rghRows[0],
hAccessor,
&BLOBGetData);
// Verify the retrieved data, only if data is not null.
if (BLOBGetData.dwStatus == DBSTATUS_S_ISNULL)
{
// Process null data.
cout << "Provider returned a null value.\n";
} else if(BLOBGetData.dwStatus == DBSTATUS_S_OK)
// Provider returned a nonNULL value.
{
BLOBGetData.pISeqStream->Read(
pBuffer,
cBytes,
&cBytesRead);
if(memcmp(pBuffer, pReadData, cBytes) != 0)
{
//cleanup
}
SAFE_RELEASE(BLOBGetData.pISeqStream);
}
// Set up data for SetData.
pMySeqStream = new CSeqStream();
/*
Put data in to the ISequentialStream object
for the provider to write.
*/
pMySeqStream->Write(pWriteData,
cBytes,
NULL);
BLOBSetData.pISeqStream = (ISequentialStream*)pMySeqStream;
BLOBSetData.dwStatus = DBSTATUS_S_OK;
BLOBSetData.dwLength = pMySeqStream->Length();
// Set the data.
hr = pIRowsetChange->SetData(rghRows[0],
hAccessor,
&BLOBSetData);
if (FAILED(hr))
{
cout << "Failed to set data.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pIAccessor->ReleaseAccessor(hAccessor, NULL);
if (FAILED(hr))
{
cout << "Failed to release accessor.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pIRowset->ReleaseRows(cRowsObtained,
rghRows,
NULL,
NULL,
NULL);
if (FAILED(hr))
{
cout << "Failed to release rows.\n";
// Release any references and return.
goto Exit;
} //end if
Exit:
// Free up all allocated memory and release interface pointers.
CoUninitialize();
} //end main.
//..........................................................
HRESULT GetCommandObject(REFIID riid, IUnknown** ppIUnknown)
{
HRESULT hr = S_OK;
// Local interface pointers, until a connection is made.
IDBInitialize* pIDBInitialize = NULL;
IDBProperties* pIDBProperties = NULL;
IDBCreateSession* pIDBCreateSession = NULL;
IDBCreateCommand* pIDBCreateCommand = NULL;
const ULONG cPropSets = 1;
DBPROPSET rgPropSets[cPropSets];
const ULONG cProperties = 4;
DBPROP rgProperties[cProperties];
/*
Initialize the property values needed to
establish the connection.
*/
for(ULONG i = 0; i < 4; i++)
VariantInit(&rgProperties[i].vValue);
// Server name.
rgProperties[0].dwPropertyID = DBPROP_INIT_DATASOURCE;
rgProperties[0].vValue.vt = VT_BSTR;
rgProperties[0].vValue.bstrVal =
SysAllocString(L"server");
rgProperties[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[0].colid = DB_NULLID;
// Database.
rgProperties[1].dwPropertyID = DBPROP_INIT_CATALOG;
rgProperties[1].vValue.vt = VT_BSTR;
rgProperties[1].vValue.bstrVal =
SysAllocString(L"pubs");
rgProperties[1].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[1].colid = DB_NULLID;
// Username (login).
rgProperties[2].dwPropertyID = DBPROP_AUTH_USERID;
rgProperties[2].vValue.vt = VT_BSTR;
rgProperties[2].vValue.bstrVal =
SysAllocString(L"login");
rgProperties[2].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[2].colid = DB_NULLID;
// Password.
rgProperties[3].dwPropertyID = DBPROP_AUTH_PASSWORD;
rgProperties[3].vValue.vt = VT_BSTR;
rgProperties[3].vValue.bstrVal =
SysAllocString(L"password");
rgProperties[3].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProperties[3].colid = DB_NULLID;
/*
Now that the properties are set, construct the DBPROPSET
structure (rgInitPropSet). The DBPROPSET structure is used
to pass an array of DBPROP structures (InitProperties) to the
SetProperties method.
*/
rgPropSets[0].guidPropertySet = DBPROPSET_DBINIT;
rgPropSets[0].cProperties = cProperties;
rgPropSets[0].rgProperties = rgProperties;
// Get the IDBInitialize interface.
hr = CoCreateInstance(CLSID_MSOLEDBSQL,
NULL,
CLSCTX_INPROC_SERVER,
IID_IDBInitialize,
(void**)&pIDBInitialize);
if(FAILED(hr))
{
cout << "Failed to get IDBInitialize interface.\n";
// Release any references and return.
goto Exit;
} //end if
// Set initialization properties.
hr = pIDBInitialize->QueryInterface(IID_IDBProperties,
(void **)&pIDBProperties);
if(FAILED(hr))
{
cout << "Failed to get IDBProperties interface.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pIDBProperties->SetProperties(cPropSets, rgPropSets);
if(FAILED(hr))
{
cout << "Failed to set properties for DBPROPSET_DBINIT.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pIDBInitialize->Initialize();
if(FAILED(hr))
{
cout << "Failed to initialize.\n";
// Release any references and return.
goto Exit;
} // end if
//Create a session object.
hr = pIDBInitialize->QueryInterface(
IID_IDBCreateSession,
(void **)&pIDBCreateSession);
if(FAILED(hr))
{
cout << "Failed to get pIDBCreateSession interface.\n";
// Release any references and return.
goto Exit;
} // end if
hr = pIDBCreateSession->CreateSession(
NULL,
IID_IDBCreateCommand,
(IUnknown**)&pIDBCreateCommand);
if(FAILED(hr))
{
cout << "Failed to create session object.\n";
// Release any references and return.
goto Exit;
} // end if
// Get the CommandText object.
hr = pIDBCreateCommand->CreateCommand(
NULL,
riid,
(IUnknown**)ppIUnknown);
if(FAILED(hr))
{
cout << "Failed to create CommandText object.\n";
// Release any references and return.
goto Exit;
} // end if
return hr;
Exit:
// Free up all allocated memory and release interface pointers.
return hr;
} //end function
//...............................................................
HRESULT CreateTable(ICommandText* pICommandText)
{
HRESULT hr = S_OK;
// Drop the xisting table.
hr = pICommandText->SetCommandText(
DBGUID_DBSQL,
L"DROP TABLE TestISeqStream");
if(FAILED(hr))
{
cout << "Failed to set command text DROP TABLE.\n";
// Release any references and return.
goto Exit;
} //end if
hr = pICommandText->Execute(NULL, IID_NULL, NULL, NULL, NULL);
if(FAILED(hr))
{
cout << "Failed to drop the table.\n";
// Release any references and return.
goto Exit;
} // end if
// Create a new table.
hr = pICommandText->SetCommandText(DBGUID_DBSQL,
L"CREATE TABLE TestISeqStream (col1 int,col2 image)");
if(FAILED(hr))
{
cout << "Failed to set command text CREATE TABLE.\n";
// Release any references and return.
goto Exit;
} // end if
hr = pICommandText->Execute(NULL, IID_NULL, NULL, NULL, NULL);
if(FAILED(hr))
{
cout << "Failed to create new table.\n";
// Release any references and return.
goto Exit;
} // end if
// Insert one row into table.
hr = pICommandText->SetCommandText(DBGUID_DBSQL,
L"INSERT INTO TestISeqStream(col1,col2) VALUES (1,0xAAAAAAAAAAAAAAAAA)");
if(FAILED(hr))
{
cout << "Failed to set command text INSERT INTO.\n";
// Release any references and return.
goto Exit;
} // end if
hr = pICommandText->Execute(NULL, IID_NULL, NULL, NULL, NULL);
if(FAILED(hr))
{
cout << "Failed to insert record in the table.\n";
// Release any references and return.
goto Exit;
} // end if
Exit:
// Free up all allocated memory and release interface pointers.
return hr;
} //end function