Redigera

Dela via


INF DDInstall section

Each per-Models DDInstall section contains an optional DriverVer directive and one or more directives referencing additional named sections in the INF file, shown here with the most frequently specified INF directives, CopyFiles and AddReg, listed first.

The sections referenced by these directives contain instructions for installing driver files and writing any device-specific and/or driver-specific information into the registry.

[install-section-name] | 
[install-section-name.nt] | 
[install-section-name.ntx86] | 
[install-section-name.ntia64] | (Windows XP and later versions of Windows)
[install-section-name.ntamd64] | (Windows XP and later versions of Windows)
[install-section-name.ntarm] | (Windows 8 and later versions of Windows)
[install-section-name.ntarm64] (Windows 10 version 1709 and later versions of Windows)

[DriverVer=mm/dd/yyyy[,x.y.v.z]]
[CopyFiles=@filename | file-list-section[,file-list-section] ...]
[CopyINF=filename1.inf[,filename2.inf]...] (Windows XP and later versions of Windows)
[AddReg=add-registry-section[,add-registry-section]...]
[AddProperty=add-property-section[,add-property-section]...] (Windows Vista and later versions of Windows)
[Include=filename1.inf[,filename2.inf]...]
[Needs=inf-section-name[,inf-section-name]...]
[Delfiles=file-list-section[,file-list-section]...]
[Renfiles=file-list-section[,file-list-section]...]
[DelReg=del-registry-section[,del-registry-section]...]
[DelProperty=del-property-section[,del-property-section]...] (Windows Vista and later versions of Windows)
[FeatureScore=featurescore]... (Windows Vista and later versions of Windows)
[BitReg=bit-registry-section[,bit-registry-section]...]
[LogConfig=log-config-section[,log-config-section]...]
[ProfileItems=profile-items-section[,profile-items-section]...] (Windows 2000 and later versions of Windows)
[UpdateInis=update-ini-section[,update-ini-section]...]
[UpdateIniFields=update-inifields-section[,update-inifields-section]...]
[Ini2Reg=ini-to-registry-section[,ini-to-registry-section]...]
[RegisterDlls=register-dll-section[,register-dll-section]...]
[UnregisterDlls=unregister-dll-section[,unregister-dll-section]...]
[ExcludeID=device-identification-string[,device-identification-string]...]... ((Windows XP and later versions of Windows)
[Reboot]

Entries

Not all valid entries are supported in a Universal INF. The following lists which directives are valid in a universal INF and which are not.

Supported in a Universal INF

DriverVer=mm/dd/yyyy[,x.y.v.z]
This optional entry specifies version information for the driver package.

For information about how to specify this entry, see INF DriverVer Directive.

CopyFiles=@filename | file-list-section[,file-list-section] ...
This directive either specifies one named file to be copied from the source media to the destination or references one or more INF-writer-defined sections in which device-relevant files on the source media are specified for transfer to the destination. The CopyFiles directive is optional, but is present in most DDInstall sections.

The DefaultDestDir entry in the DestinationDirs section of the INF specifies the destination for any single file to be copied. The SourceDisksNames and SourceDisksFiles sections, or an additional INF specified in the LayoutFile entry of this INF's Version section, provide the location on the distribution media of the driver files.

For more information, see INF CopyFiles Directive.

CopyINF=filename1.inf[,filename2.inf]...
(Windows XP and later) This directive causes specified INF files to be copied to the target system.

For more information, see INF CopyINF Directive.

AddReg=add-registry-section[,add-registry-section]...
This directive references one or more INF-writer-defined sections in which new subkeys, possibly with initial value entries, are specified to be written into the registry or in which the value entries of existing keys are modified.

An HKR specification in such an add-registry section designates the "software key" registry path of the device being installed.

For more information, see INF AddReg Directive.

AddProperty=add-property-section[,add-property-section]...
(Windows Vista and later) References one or more INF file sections that modify device properties that are set for a device instance. You should use an INF AddProperty directive only to set a device instance property that is new to Windows Vista or later versions of Windows operating systems.

For device instance properties that were introduced earlier on Windows Server 2003, Windows XP, or Windows 2000, and that have corresponding registry entry values, you should continue to use INF AddReg directives to set the device instance properties. These guidelines apply to system-defined properties and custom properties. For more information about how to use the AddProperty directive, see Using the INF AddProperty Directive and the INF DelProperty Directive.

Include=filename1.inf[,filename2.inf]...
This optional entry specifies one or more additional system-supplied INF files that contain sections needed to install this device and/or driver. If this entry is specified, usually so is a Needs entry.

For example, INF files for device drivers that depend on the system's kernel-streaming support may specify this entry as follows:

Include= ks.inf, kscaptur.inf, ksfilter.inf

Needs=inf-section-name[,inf-section-name]...
This optional entry specifies sections within system-supplied INF files that must be processed during the installation of this device. Typically, such a named section is a DDInstall (or DDInstall.xxx) section within one of the INF files that are listed in an Include entry. However, it can be any section that is referenced within such a DDInstall or DDInstall.xxx section of the included INF.

For example, INF files for device drivers that have the preceding Include entry may specify this entry as follows:

Needs= KS.Registration, KSCAPTUR.Registration.NT, MSPCLOCK.Installation

FeatureScore=featurescore

Warning

The FeatureScore directive is only processed when specified directly in the [DDInstall] section.

(Windows Vista and later) This directive provides an additional ranking criterion for drivers that are based on the features that a driver supports. For example, feature scores might be defined for a device setup class that distinguishes between drivers based on class-specific criteria.

For more information about how drivers are ranked, see How Windows Ranks Drivers (Windows Vista and Later).

For more information about this directive, see INF FeatureScore Directive.

Note

Although a DDInstall section can contain multiple FeatureScore entries, only the first entry is processed for the section.

ExcludeID=device-identification-string[,device-identification-string]...

Warning

The ExcludeID directive is only processed when specified directly in the [DDInstall] section.

(Windows XP and later) This directive specifies one or more device identification strings (either hardware IDs or compatible IDs). The DDInstall section does not install devices that have device IDs that match any of the hardware IDs or compatible IDs listed.

Reboot
This directive indicates that the caller should be prompted to reboot the system after installation is complete.

For more information, see INF Reboot Directive.

Not supported in a Universal INF

Delfiles=file-list-section[,file-list-section]...
This directive references one or more INF-writer-defined sections listing files on the target to be deleted.

For more information, see INF DelFiles Directive.

Renfiles=file-list-section[,file-list-section]...
This directive references one or more INF-writer-defined sections listing files to be renamed on the destination before device-relevant source files are copied to the target computer.

For more information, see INF RenFiles Directive.

DelReg=del-registry-section[,del-registry-section]...
This directive references one or more INF-writer-defined sections in which keys and/or value entries are specified to be removed from the registry during installation of the devices.

Typically, this directive is used to handle upgrades when an INF must clean up old registry entries from a previous installation of this device.

An HKR specification in such a delete-registry section designates the "software key" registry path of the device being installed.

For more information, see INF DelReg Directive.

DelProperty=del-property-section[,del-property-section]...
(Windows Vista and later) References one or more INF file sections that delete device properties that are set for a device instance. You should use an INF DelProperty directive only to delete a device instance property that is new to Windows Vista or later versions of Windows.

For device instance properties that were introduced earlier on Windows Server 2003, Windows XP, or Windows 2000, and that have corresponding registry entry values, you should continue to use INF DelReg directives to delete the device instance properties. These guidelines apply to system-defined properties and custom properties. For more information about how to use the DelProperty directive, see Using the INF AddProperty Directive and the INF DelProperty Directive.

BitReg=bit-registry-section[,bit-registry-section]...
This directive references one or more INF-writer-defined sections in which existing registry value entries of type REG_BINARY are modified.

An HKR specification in such a bit-registry section designates the "software key" registry path of the device being installed.

For more information, see INF BitReg Directive.

LogConfig=log-config-section[,log-config-section]...
This directive references one or more INF-writer-defined sections within an INF for a root-enumerated device or for a manually installed device. In these named sections, the INF for such a "detected" or manually installed device specifies one or more logical configurations of bus-relative hardware resources that the device must have to be operational. The INF for such a manually installed device that is not software-configurable should also have a DDInstall.FactDef section.

The LogConfig directive is never used to install Plug and Play (PnP) devices. However, you can use an INF DDInstall.LogConfigOverride section to provide an override configuration for PnP devices.

This directive is irrelevant to all higher-level (nondevice) drivers and components.

For more information, see INF LogConfig Directive.

ProfileItems=profile-items-section[,profile-items-section]...
(Microsoft Windows 2000 and later versions of Windows) This rarely used directive references one or more INF-writer-defined sections that describe items to be added to, or removed from, the Start menu.

For more information, see INF ProfileItems Directive.

UpdateInis=update-ini-section[,update-ini-section]...
This rarely used directive references one or more INF-writer-defined sections, specifying a source INI file from which a particular section or line within such a section is to be read into a destination INI file of the same name during installation. Optionally, line-by-line modifications to an existing INI file on the destination from a given source INI file of the same name can be specified in the update-ini section.

For more information, see INF UpdateInis Directive.

UpdateIniFields=update-inifields-section[,update-inifields-section]...
This rarely used directive references one or more INF-writer-defined sections in which modifications within the lines of a device-specific INI file are specified.

For more information, see INF UpdateIniFields Directive.

Ini2Reg=ini-to-registry-section[,ini-to-registry-section]...
This rarely used directive references one or more INF-writer-defined sections in which sections or lines from a device-specific INI file, supplied on the source media, are to be moved into the registry.

For more information, see INF Ini2Reg Directive.

RegisterDlls=register-dll-section[,register-dll-section]...
This directive references one or more INF sections used to specify files that are OLE controls and require self-registration.

For more information, see INF RegisterDlls Directive.

UnregisterDlls=unregister-dll-section[,unregister-dll-section]...
This directive references one or more INF sections used to specify files that are OLE controls and require self-unregistration (self-removal).

For more information, see INF UnregisterDlls Directive.

Remarks

Throughout the Windows Driver Kit (WDK) documentation, the term DDInstall is used to refer to an install-section-name, with or without platform extensions. Therefore, "DDInstall section" means "a named section within an INF, having the format [install-section-name] or [install-section-name.ntxxx]". When you create names for DDInstall sections, you should include a device-specific prefix, such as [WDMPNPB003_Device] or [GPR400.Install.NT].

Each DDInstall section must be referenced in a device/models-specific entry under the per-manufacturer INF Models section of the INF file.

Except for devices that have no associated files to be transferred from the source media, an INF file that installs a WDM driver on different operating system platforms must have at least one of the following DDInstall sections:

  • An install-section-name.ntx86 section that specifies the entries for device/driver installations specific to x86-based platforms.
  • An install-section-name.ntia64 section that specifies the entries for device/driver installations specific to Itanium-based platforms.
  • An install-section-name.ntamd64 section that specifies the entries for device/driver installations specific to x64-based platforms.
  • An install-section-name.ntarm section that specifies the entries for device/driver installations specific to Arm-based platforms.
  • An install-section-name.ntarm64 section that specifies the entries for device/driver installations specific to Arm64-based platforms.
  • An install-section-name or install-section-name.nt section that specifies the entries for device/driver installations that are not specific to a particular hardware platform.

For more information about how to use the system-defined .nt, .ntx86, .ntia64, .ntamd64, .ntarm, and .ntarm64 extensions, see Creating INF Files for Multiple Platforms and Operating Systems.

Starting with Windows 2000, an INF file that installs drivers must have DDInstall.Services sections to specify driver service information.

Each directive in a DDInstall section can reference more than one section name. However, each additional named section must be separated from the next with a comma (,).

Each section name must be unique within the INF file and must follow the general rules for defining section names. For more information about these rules, see General Syntax Rules for INF Files.

Any AddReg directive specified in a DDInstall section is assumed to reference an add-registry section that cannot be used to store information about upper or lower-filter drivers, about multifunction devices, or about driver-independent but device-specific parameters. If a device/driver INF must store this type of information in the registry, it must use an AddReg directive in its undecorated and decorated DDInstall.HW sections, if any, to reference another INF-writer-defined add-registry-section.

Depending on the device setup class that was specified in the INF Version section, additional class-specific directives can be specified in a DDInstall section. For more information about class-specific directives, see the following topics:

Examples

This example shows the expansion of the DDInstall sections, Ser_Inst and Inp_Inst. These sections are referenced in the example for the INF Models section.

[Ser_Inst]
CopyFiles=Ser_CopyFiles, mouclass_CopyFiles

[Ser_CopyFiles]
sermouse.sys

[mouclass_CopyFiles] ; section name referenced by > 1 CopyFiles
mouclass.sys

[Inp_Inst]
CopyFiles=Inp_CopyFiles, mouclass_CopyFiles

[Inp_CopyFiles]
inport.sys

The following example shows the DDInstall section of an INF file that installs a system-supplied WDM driver for an audio device on various operating system platforms:

[WDMPNPB003_Device.NT]
Include=ks.inf, wdmaudio.inf
Needs=KS.Registration, WDMAUDIO.Registration.NT
CopyFiles=MSSB16.CopyList
AddReg=WDM_SB16.AddReg

The following example shows the sections referenced by the preceding Needs entry in the system-supplied ks.inf and wdmaudio.inf files. In the preceding example, these files are specified in the Includes entry. When the operating system's device installer processes this device's install-section-name.nt section, these next two sections are also processed.

[KS.Registration]
; following AddReg= is actually a single line in the ks.inf file
AddReg=ProxyRegistration,CategoryRegistration,\
    TopologyNodeRegistration,PlugInRegistration,PinNameRegistration,\
    DeviceRegistration 
CopyFiles=KSProxy.Files,KSDriver.Files

[WDMAUDIO.Registration.NT]
AddReg=WDM.AddReg
CopyFiles=WDM.CopyFiles.Sys, WDM.CopyFiles.Drv
;
; INF-writer-defined add-registry and file-list sections
; referenced by preceding directives are omitted here for brevity
;

See also

AddProperty

DDInstall.CoInstallers

DDInstall.FactDef

DDInstall.HW

DDInstall.Interfaces

DDInstall.LogConfigOverride

DDInstall.Services

DefaultInstall

DefaultInstall.Services

DelProperty

FeatureScore