Redigera

Dela via

Policy CSP - ADMX_MMCSnapins

  • Artikel

Tip

This CSP contains ADMX-backed policies which require a special SyncML format to enable or disable. You must specify the data type in the SyncML as <Format>chr</Format>. For details, see Understanding ADMX-backed policies.

The payload of the SyncML must be XML-encoded; for this XML encoding, there are a variety of online encoders that you can use. To avoid encoding the payload, you can use CDATA if your MDM supports it. For more information, see CDATA Sections.

MMC_ActiveDirDomTrusts

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ActiveDirDomTrusts

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ActiveDirDomTrusts
Friendly Name Active Directory Domains and Trusts
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{EBC53A38-A23F-11D0-B09B-00C04FD8DCA6}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ActiveDirSitesServices

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ActiveDirSitesServices

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ActiveDirSitesServices
Friendly Name Active Directory Sites and Services
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{D967F824-9968-11D0-B936-00C04FD8D5B0}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ActiveDirUsersComp

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ActiveDirUsersComp

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ActiveDirUsersComp
Friendly Name Active Directory Users and Computers
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{E355E538-1C2E-11D0-8C37-00C04FD8FE93}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ADMComputers_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ADMComputers_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ADMComputers_1
Friendly Name Administrative Templates (Computers)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{0F6B957D-509E-11D1-A7CC-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ADMComputers_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ADMComputers_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ADMComputers_2
Friendly Name Administrative Templates (Computers)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{B6F9C8AE-EF3A-41C8-A911-37370C331DD4}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ADMUsers_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ADMUsers_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ADMUsers_1
Friendly Name Administrative Templates (Users)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{0F6B957E-509E-11D1-A7CC-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ADMUsers_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ADMUsers_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ADMUsers_2
Friendly Name Administrative Templates (Users)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{B6F9C8AF-EF3A-41C8-A911-37370C331DD4}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ADSI

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ADSI

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ADSI
Friendly Name ADSI Edit
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{1C5DACFA-16BA-11D2-81D0-0000F87A7AA3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_AppleTalkRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_AppleTalkRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_AppleTalkRouting
Friendly Name AppleTalk Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{1AA7F83C-C7F5-11D0-A376-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_AuthMan

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_AuthMan

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_AuthMan
Friendly Name Authorization Manager
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{1F5EEC01-1214-4D94-80C5-4BDCD2014DDD}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_CertAuth

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_CertAuth

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_CertAuth
Friendly Name Certification Authority
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{de751566-4cc6-11d1-8ca0-00c04fc297eb}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_CertAuthPolSet

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_CertAuthPolSet

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_CertAuthPolSet
Friendly Name Certification Authority Policy Settings
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{3F276EB4-70EE-11D1-8A0F-00C04FB93753}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_Certs

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_Certs

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_Certs
Friendly Name Certificates
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{53D6AB1D-2488-11D1-A28C-00C04FB94F17}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_CertsTemplate

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_CertsTemplate

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_CertsTemplate
Friendly Name Certificate Templates
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{A994E107-6854-4F3D-917C-E6F01670F6D3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ComponentServices

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ComponentServices

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ComponentServices
Friendly Name Component Services
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{C9BC92DF-5B9A-11D1-8F00-00C04FC2C17B}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ComputerManagement

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ComputerManagement

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ComputerManagement
Friendly Name Computer Management
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{58221C67-EA27-11CF-ADCF-00AA00A80033}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ConnectionSharingNAT

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ConnectionSharingNAT

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ConnectionSharingNAT
Friendly Name Connection Sharing (NAT)
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{C2FE450B-D6C2-11D0-A37B-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_DCOMCFG

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_DCOMCFG

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_DCOMCFG
Friendly Name DCOM Configuration Extension
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{9EC88934-C774-11d1-87F4-00C04FC2C17B}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_DeviceManager_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_DeviceManager_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_DeviceManager_1
Friendly Name Device Manager
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{90087284-d6d6-11d0-8353-00a0c90640bf}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_DeviceManager_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_DeviceManager_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_DeviceManager_2
Friendly Name Device Manager
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{74246bfc-4c96-11d0-abef-0020af6b0b7a}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_DFS

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_DFS

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_DFS
Friendly Name Distributed File System
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{677A2D94-28D9-11D1-A95B-008048918FB1}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_DHCPRelayMgmt

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_DHCPRelayMgmt

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_DHCPRelayMgmt
Friendly Name DHCP Relay Management
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{C2FE4502-D6C2-11D0-A37B-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_DiskDefrag

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_DiskDefrag

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_DiskDefrag
Friendly Name Disk Defragmenter
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{43668E21-2636-11D1-A1CE-0080C88593A5}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_DiskMgmt

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_DiskMgmt

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_DiskMgmt
Friendly Name Disk Management
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{8EAD3A12-B2C1-11d0-83AA-00A0C92C9D5D}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_EnterprisePKI

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_EnterprisePKI

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_EnterprisePKI
Friendly Name Enterprise PKI
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{634BDE40-E5E1-49A1-B2CD-140FFFC830F9}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_EventViewer_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_EventViewer_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_EventViewer_1
Friendly Name Event Viewer
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{394C052E-B830-11D0-9A86-00C04FD8DBF7}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_EventViewer_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_EventViewer_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_EventViewer_2
Friendly Name Event Viewer (Windows Vista)
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{b05566ae-fe9c-4363-be05-7a4cbb7cb510}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_EventViewer_3

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_EventViewer_3

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_EventViewer_3
Friendly Name Event Viewer
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{975797FC-4E2A-11D0-B702-00C04FD8DBF7}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_EventViewer_4

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_EventViewer_4

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_EventViewer_4
Friendly Name Event Viewer (Windows Vista)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_FailoverClusters

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_FailoverClusters

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_FailoverClusters
Friendly Name Failover Clusters Manager
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{D2779945-405B-4ACE-8618-508F3E3054AC}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_FAXService

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_FAXService

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_FAXService
Friendly Name FAX Service
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{753EDB4D-2E1B-11D1-9064-00A0C90AB504}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_FolderRedirection_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_FolderRedirection_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_FolderRedirection_1
Friendly Name Folder Redirection
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{88E729D6-BDC1-11D1-BD2A-00C04FB9603F}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_FolderRedirection_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_FolderRedirection_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_FolderRedirection_2
Friendly Name Folder Redirection
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{c40d66a0-e90c-46c6-aa3b-473e38c72bf2}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_FrontPageExt

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_FrontPageExt

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_FrontPageExt
Friendly Name FrontPage Server Extensions
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{FF5903A8-78D6-11D1-92F6-006097B01056}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_GroupPolicyManagementSnapIn

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_GroupPolicyManagementSnapIn

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_GroupPolicyManagementSnapIn
Friendly Name Group Policy Management
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy
Registry Key Name Software\Policies\Microsoft\MMC{E12BBB5D-D59D-4E61-947A-301D25AE8C23}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_GroupPolicySnapIn

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_GroupPolicySnapIn

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_GroupPolicySnapIn
Friendly Name Group Policy Object Editor
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy
Registry Key Name Software\Policies\Microsoft\MMC{8FC0B734-A0E1-11D1-A7D3-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_GroupPolicyTab

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_GroupPolicyTab

Permits or prohibits use of the Group Policy tab in property sheets for the Active Directory Users and Computers and Active Directory Sites and Services snap-ins.

If you enable this setting, the Group Policy tab is displayed in the property sheet for a site, domain, or organizational unit displayed by the Active Directory Users and Computers and Active Directory Sites and Services snap-ins. If you disable the setting, the Group Policy tab isn't displayed in those snap-ins.

If this setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this tab is displayed.

  • If "Restrict users to the explicitly permitted list of snap-ins" is enabled, users won't have access to the Group Policy tab.

To explicitly permit use of the Group Policy tab, enable this setting. If this setting isn't configured (or disabled), the Group Policy tab is inaccessible.

  • If "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users will have access to the Group Policy tab.

To explicitly prohibit use of the Group Policy tab, disable this setting. If this setting isn't configured (or enabled), the Group Policy tab is accessible.

When the Group Policy tab is inaccessible, it doesn't appear in the site, domain, or organizational unit property sheets.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_GroupPolicyTab
Friendly Name Group Policy tab for Active Directory Tools
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy
Registry Key Name Software\Policies\Microsoft\MMC{D70A2BEA-A63E-11D1-A7D4-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_HRA

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_HRA

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_HRA
Friendly Name Health Registration Authority (HRA)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{89cc9588-7628-4d29-8e4a-6550d0087059}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IAS

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IAS

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IAS
Friendly Name Internet Authentication Service (IAS)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{8F8F8DC0-5713-11D1-9551-0060B0576642}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IASLogging

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IASLogging

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IASLogging
Friendly Name IAS Logging
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{2E19B602-48EB-11d2-83CA-00104BCA42CF}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IEMaintenance_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IEMaintenance_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IEMaintenance_1
Friendly Name Internet Explorer Maintenance
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{FC715823-C5FB-11D1-9EEF-00A0C90347FF}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IEMaintenance_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IEMaintenance_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IEMaintenance_2
Friendly Name Internet Explorer Maintenance
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{d524927d-6c08-46bf-86af-391534d779d3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IGMPRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IGMPRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IGMPRouting
Friendly Name IGMP Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{C2FE4508-D6C2-11D0-A37B-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IIS

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IIS

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IIS
Friendly Name Internet Information Services
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{A841B6C2-7577-11D0-BB1F-00A0C922E79C}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IndexingService

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IndexingService

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IndexingService
Friendly Name Indexing Service
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{95AD72F0-44CE-11D0-AE29-00AA004B9986}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IPRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IPRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IPRouting
Friendly Name IP Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{C2FE4500-D6C2-11D0-A37B-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IpSecManage

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IpSecManage

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IpSecManage
Friendly Name IP Security Policy Management
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{DEA8AFA2-CC85-11d0-9CE2-0080C7221EBD}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IPSecManage_GP

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IPSecManage_GP

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IPSecManage_GP
Friendly Name IP Security Policy Management
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{DEA8AFA0-CC85-11d0-9CE2-0080C7221EBD}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IpSecMonitor

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IpSecMonitor

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IpSecMonitor
Friendly Name IP Security Monitor
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{57C596D0-9370-40C0-BA0D-AB491B63255D}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IPXRIPRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IPXRIPRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IPXRIPRouting
Friendly Name IPX RIP Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{90810502-38F1-11D1-9345-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IPXRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IPXRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IPXRouting
Friendly Name IPX Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{90810500-38F1-11D1-9345-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_IPXSAPRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_IPXSAPRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_IPXSAPRouting
Friendly Name IPX SAP Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{90810504-38F1-11D1-9345-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_LocalUsersGroups

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_LocalUsersGroups

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_LocalUsersGroups
Friendly Name Local Users and Groups
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{5D6179C8-17EC-11D1-9AA9-00C04FD8FE93}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_LogicalMappedDrives

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_LogicalMappedDrives

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_LogicalMappedDrives
Friendly Name Logical and Mapped Drives
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{6E8E0081-19CD-11D1-AD91-00AA00B8E05A}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_NapSnap

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_NapSnap

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_NapSnap
Friendly Name NAP Client Configuration
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{a1bc4eca-66b2-44e8-9915-be02e84438ba}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_NapSnap_GP

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_NapSnap_GP

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_NapSnap_GP
Friendly Name NAP Client Configuration
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC\FX:{a1bc4ecb-66b2-44e8-9915-be02e84438ba}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_Net_Framework

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_Net_Framework

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_Net_Framework
Friendly Name .Net Framework Configuration
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{18BA7139-D98B-43c2-94DA-2604E34E175D}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_NPSUI

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_NPSUI

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_NPSUI
Friendly Name Network Policy Server (NPS)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{6630f2d7-bd52-4072-bfa7-863f3d0c5da0}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_OCSP

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_OCSP

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_OCSP
Friendly Name Online Responder
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{6d8880af-e518-43a8-986c-1ad21c4c976e}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_OSPFRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_OSPFRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_OSPFRouting
Friendly Name OSPF Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{C2FE4506-D6C2-11D0-A37B-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_PerfLogsAlerts

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_PerfLogsAlerts

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_PerfLogsAlerts
Friendly Name Performance Logs and Alerts
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{7478EF61-8C46-11d1-8D99-00A0C913CAD4}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_PublicKey

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_PublicKey

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_PublicKey
Friendly Name Public Key Policies
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{34AB8E82-C27E-11D1-A6C0-00C04FB94F17}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_QoSAdmission

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_QoSAdmission

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_QoSAdmission
Friendly Name QoS Admission Control
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{FD57D297-4FD9-11D1-854E-00C04FC31FD3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RAS_DialinUser

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RAS_DialinUser

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RAS_DialinUser
Friendly Name RAS Dialin - User Node
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{B52C1E50-1DD2-11D1-BC43-00C04FC31FD3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RemoteAccess

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RemoteAccess

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RemoteAccess
Friendly Name Remote Access
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{5880CD5C-8EC0-11d1-9570-0060B0576642}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RemoteDesktop

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RemoteDesktop

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RemoteDesktop
Friendly Name Remote Desktops
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{3D5D035E-7721-4B83-A645-6C07A3D403B7}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RemStore

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RemStore

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RemStore
Friendly Name Removable Storage
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{243E20B0-48ED-11D2-97DA-00A024D77700}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ResultantSetOfPolicySnapIn

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ResultantSetOfPolicySnapIn

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ResultantSetOfPolicySnapIn
Friendly Name Resultant Set of Policy snap-in
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy
Registry Key Name Software\Policies\Microsoft\MMC{6DC3804B-7212-458D-ADB0-9A07E2AE1FA2}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RIPRouting

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RIPRouting

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RIPRouting
Friendly Name RIP Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{C2FE4504-D6C2-11D0-A37B-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RIS

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RIS

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RIS
Friendly Name Remote Installation Services
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{3060E8CE-7020-11D2-842D-00C04FA372D4}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_Routing

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_Routing

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_Routing
Friendly Name Routing
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{DAB1A262-4FD7-11D1-842C-00C04FB6C218}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RRA

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RRA

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RRA
Friendly Name Routing and Remote Access
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{1AA7F839-C7F5-11D0-A376-00C04FC9DA04}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_RSM

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_RSM

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_RSM
Friendly Name Removable Storage Management
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{3CB6973D-3E6F-11D0-95DB-00A024D77700}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SCA

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SCA

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SCA
Friendly Name Security Configuration and Analysis
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{011BE22D-E453-11D1-945A-00C04FB984F9}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ScriptsMachine_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ScriptsMachine_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ScriptsMachine_1
Friendly Name Scripts (Startup/Shutdown)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{40B6664F-4972-11D1-A7CA-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ScriptsMachine_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ScriptsMachine_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ScriptsMachine_2
Friendly Name Scripts (Startup/Shutdown)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{40B66660-4972-11d1-A7CA-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ScriptsUser_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ScriptsUser_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ScriptsUser_1
Friendly Name Scripts (Logon/Logoff)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{40B66650-4972-11D1-A7CA-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ScriptsUser_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ScriptsUser_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ScriptsUser_2
Friendly Name Scripts (Logon/Logoff)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{40B66661-4972-11d1-A7CA-0000F87571E3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SecuritySettings_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SecuritySettings_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SecuritySettings_1
Friendly Name Security Settings
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SecuritySettings_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SecuritySettings_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SecuritySettings_2
Friendly Name Security Settings
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{fe883157-cebd-4570-b7a2-e4fe06abe626}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SecurityTemplates

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SecurityTemplates

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SecurityTemplates
Friendly Name Security Templates
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{5ADF5BF6-E452-11D1-945A-00C04FB984F9}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SendConsoleMessage

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SendConsoleMessage

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SendConsoleMessage
Friendly Name Send Console Message
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{B1AFF7D0-0C49-11D1-BB12-00C04FC9A3A3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ServerManager

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ServerManager

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ServerManager
Friendly Name Server Manager
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{18ea3f92-d6aa-41d9-a205-2023400c8fbb}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_ServiceDependencies

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_ServiceDependencies

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_ServiceDependencies
Friendly Name Service Dependencies
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{BD95BA60-2E26-AAD1-AD99-00AA00B8E05A}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_Services

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_Services

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_Services
Friendly Name Services
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{58221C66-EA27-11CF-ADCF-00AA00A80033}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SharedFolders

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SharedFolders

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SharedFolders
Friendly Name Shared Folders
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{58221C65-EA27-11CF-ADCF-00AA00A80033}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SharedFolders_Ext

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SharedFolders_Ext

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SharedFolders_Ext
Friendly Name Shared Folders Ext
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{58221C69-EA27-11CF-ADCF-00AA00A80033}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SMTPProtocol

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SMTPProtocol

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SMTPProtocol
Friendly Name SMTP Protocol
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{03f1f940-a0f2-11d0-bb77-00aa00a1eab7}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SNMP

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SNMP

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SNMP
Friendly Name SNMP
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{7AF60DD3-4979-11D1-8A6C-00C04FC33566}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SoftwareInstalationComputers_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SoftwareInstalationComputers_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SoftwareInstalationComputers_1
Friendly Name Software Installation (Computers)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{942A8E4F-A261-11D1-A760-00C04FB9603F}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SoftwareInstalationComputers_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SoftwareInstalationComputers_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SoftwareInstalationComputers_2
Friendly Name Software Installation (Computers)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{7E45546F-6D52-4D10-B702-9C2E67232E62}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SoftwareInstallationUsers_1

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SoftwareInstallationUsers_1

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SoftwareInstallationUsers_1
Friendly Name Software Installation (Users)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{BACF5C8A-A3C7-11D1-A760-00C04FB9603F}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SoftwareInstallationUsers_2

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SoftwareInstallationUsers_2

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SoftwareInstallationUsers_2
Friendly Name Software Installation (Users)
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Resultant Set of Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{1BC972D6-555C-4FF7-BE2C-C584021A0A6A}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SysInfo

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SysInfo

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SysInfo
Friendly Name System Information
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{45ac8c63-23e2-11d1-a696-00c04fd58bc3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_SysProp

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_SysProp

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_SysProp
Friendly Name System Properties
Location User Configuration
Path MMC_RESTRICT > Extension snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{0F3621F1-23C6-11D1-AD97-00AA00B88E5A}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_Telephony

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_Telephony

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_Telephony
Friendly Name Telephony
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{E26D02A0-4C1F-11D1-9AA1-00C04FC3357A}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_TerminalServices

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_TerminalServices

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_TerminalServices
Friendly Name Remote Desktop Services Configuration
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{B91B6008-32D2-11D2-9888-00A0C925F917}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_TPMManagement

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_TPMManagement

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_TPMManagement
Friendly Name TPM Management
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{7d3830aa-e69e-4e17-8bd1-1b87b97099da}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_WindowsFirewall

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_WindowsFirewall

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_WindowsFirewall
Friendly Name Windows Firewall with Advanced Security
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC\FX:{b05566ac-fe9c-4368-be02-7a4cbb7cbe11}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_WindowsFirewall_GP

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_WindowsFirewall_GP

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_WindowsFirewall_GP
Friendly Name Windows Firewall with Advanced Security
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{0E752416-F29E-4195-A9DD-7F0D4D5A9D71}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_WiredNetworkPolicy

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_WiredNetworkPolicy

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_WiredNetworkPolicy
Friendly Name Wired Network (IEEE 802.3) Policies
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{06993B16-A5C7-47EB-B61C-B1CB7EE600AC}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_WirelessMon

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_WirelessMon

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_WirelessMon
Friendly Name Wireless Monitor
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{23DC5869-BD9F-46fd-AADD-1F869BA64FC3}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_WirelessNetworkPolicy

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_WirelessNetworkPolicy

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_WirelessNetworkPolicy
Friendly Name Wireless Network (IEEE 802.11) Policies
Location User Configuration
Path MMC > Restricted/Permitted snap-ins > Group Policy > Group Policy snap-in extensions
Registry Key Name Software\Policies\Microsoft\MMC{2DA6AA7F-8C88-4194-A558-0D36E7FD3E64}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

MMC_WMI

Scope Editions Applicable OS
❌ Device
✅ User		 ✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC		 ✅ Windows 10, version 2004 with KB5005101 [10.0.19041.1202] and later
✅ Windows 10, version 20H2 with KB5005101 [10.0.19042.1202] and later
✅ Windows 10, version 21H1 with KB5005101 [10.0.19043.1202] and later
✅ Windows 11, version 21H2 [10.0.22000] and later		 
./User/Vendor/MSFT/Policy/Config/ADMX_MMCSnapins/MMC_WMI

This policy setting permits or prohibits the use of this snap-in.

  • If you enable this policy setting, the snap-in is permitted and can be added into the Microsoft Management Console or run from the command line as a standalone console.

  • If you disable this policy setting, the snap-in is prohibited and can't be added into the Microsoft Management Console or run from the command line as a standalone console. An error message is displayed stating that policy is prohibiting the use of this snap-in.

  • If this policy setting isn't configured, the setting of the "Restrict users to the explicitly permitted list of snap-ins" setting determines whether this snap-in is permitted or prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is enabled, users can't use any snap-in except those explicitly permitted. To explicitly permit use of this snap-in, enable this policy setting.

  • If this policy setting isn't configured or disabled, this snap-in is prohibited.

  • If the policy setting "Restrict users to the explicitly permitted list of snap-ins" is disabled or not configured, users can use any snap-in except those explicitly prohibited. To explicitly prohibit use of this snap-in, disable this policy setting.

  • If this policy setting isn't configured or enabled, the snap-in is permitted.

When a snap-in is prohibited, it doesn't appear in the Add/Remove Snap-in window in MMC. Also, when a user opens a console file that includes a prohibited snap-in, the console file opens, but the prohibited snap-in doesn't appear.

Description framework properties:

Property name Property value
Format chr (string)
Access Type Add, Delete, Get, Replace

Tip

This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.

ADMX mapping:

Name Value
Name MMC_WMI
Friendly Name WMI Control
Location User Configuration
Path MMC > Restricted/Permitted snap-ins
Registry Key Name Software\Policies\Microsoft\MMC{5C659257-E236-11D2-8899-00104B2AFB46}
Registry Value Name Restrict_Run
ADMX File Name MMCSnapins.admx

Policy configuration service provider