แชร์ผ่าน


Change the hold duration for an inactive mailbox

Microsoft 365 licensing guidance for security & compliance.

An inactive mailbox is mailbox state that is used to retain a former employee's email after they leave your organization. A mailbox becomes inactive when an applicable hold is applied to it before the Microsoft 365 user object is deleted. The following types of holds initiate the creation of an inactive mailbox upon user account deletion:

Important

While any of the above holds will force a mailbox to become inactive upon Microsoft 365 user account deletion, it is strongly recommended that you use Microsoft 365 retention when proactively planning to utilize inactive mailboxes.

  • eDiscovery holds are intended for specific, time-bound cases related to a legal issue. At some point, a legal case will probably end and the holds associated with the case will be removed and the eDiscovery case will be closed (or deleted). If a hold that's placed on an inactive mailbox is associated with an eDiscovery case, and the hold is released or the eDiscovery case is closed or deleted, the inactive mailbox will be permanently deleted.

  • In-Place Holds in the Exchange admin center are now retired. As of July 1, 2020, new In-Place Holds were unable to be created in Exchange Online. As of October 1, 2020, the hold duration of in-place holds could no longer be changed. Any inactive mailbox that has an In-Place Hold applied can only be deleted by removing the In-Place Hold. Existing inactive mailboxes that are on In-Place Hold will continue to be preserved until the hold is removed. For more information about In-Place Holds retirement, see Retirement of legacy eDiscovery tools.

  • Litigation hold remains supported as an alternative method to retain content in a mailbox and make it inactive after a user account is deleted. However, as an older technology, we recommend you use Microsoft 365 retention instead.

Once made inactive, the contents of the mailbox including the Recoverable Items folder are retained until the hold that was placed on the mailbox before it was made inactive no longer applies.

If the applicable hold is not time-based, such as a hold associated with an indefinite retain-only Microsoft 365 retention policy or label, an eDiscovery case or Litigation Hold (without a LitigationHoldDuration configured), the mailbox content is retained indefinitely until the hold is removed.

However, if the hold is time-based, the mailbox content is retained until the hold duration expires. At this time, any items in the Recoverable Items folder are permanently deleted (purged) from the inactive mailbox.

Note

For inactive mailboxes, we recommend using a retain and delete setting for your Microsoft 365 retention policy or labels. If you choose a retain only setting, the Recoverable Items folder will purge at the end of the hold duration, however any other non-deleted items will remain within the inactive mailbox indefinitely.

As regulations and policies evolve, there may be some situations in which you need to change the duration of the hold assigned to the inactive mailbox. The following steps outline how to do this.

Tip

If you're not an E5 customer, use the 90-day Microsoft Purview solutions trial to explore how additional Purview capabilities can help your organization manage data security and compliance needs. Start now at the Microsoft Purview compliance portal trials hub. Learn details about signing up and trial terms.

Connect to PowerShell

As we mentioned before, many different types of holds can trigger the creation of an inactive mailbox. For this reason, in order to change the hold duration applied to the inactive mailbox, you must first identify what type of holds are affecting it. To identify the type of holds, you must use Exchange Online PowerShell to identify the types of holds. If the inactive mailbox is affected by Microsoft 365 retention policies or labels, you must also use Security & Compliance PowerShell to identify the specific policies.

Step 1: Identify the holds on an inactive mailbox

Because different types of holds or one or more Microsoft 365 retention policies might be placed on an inactive mailbox, the first step is to identify the holds on an inactive mailbox.

Run the following command in Exchange Online PowerShell to display the hold information for a specific inactive mailbox in your organization.

Get-Mailbox -Identity <identity of inactive mailbox> -InactiveMailboxOnly | FL DisplayName,Name,DistinguishedName,ExchangeGuid,IsInactiveMailbox,LitigationHoldEnabled,LitigationHoldDuration,LitigationHoldDate,LitigationHoldOwner,InPlaceHolds,ComplianceTagHoldApplied

If you need to identify the type of hold for multiple inactive mailboxes and your organization has a large number of them, it may become unmanageable to view using PowerShell. In this case, you can export all of the applicable information to a CSV file using the following command and modifying the Path as needed for your environment:

Get-Mailbox -InactiveMailboxOnly -ResultSize Unlimited | Select DisplayName,Name,DistinguishedName,ExchangeGuid,IsInactiveMailbox,LitigationHoldEnabled,LitigationHoldDuration,LitigationHoldDate,LitigationHoldOwner,InPlaceHolds,ComplianceTagHoldApplied | Export-Csv -NoTypeInformation -Path "C:\Temp\InactiveMailboxHoldTypes.csv"

For the purposes of this example, the following shows results for six inactive mailboxes with different possible hold types.

Note

Multiple holds including multiple types of holds can apply to a single inactive mailbox.

DisplayName              : Ann Beebe
Name                     : annb
DistinguishedName        : CN=annb,OU=Soft Deleted
                           Objects,OU=contoso.onmicrosoft.com,OU=Microsoft Exchange
                           Hosted Organizations,DC=NAMPR06A007,DC=PROD,DC=OUTLOOK,DC=COM
ExchangeGuid             : 664ef44e-c1a0-47b0-9553-2ecdfc6ef840
IsInactiveMailbox        : True
LitigationHoldEnabled    : True
LitigationHoldDuration   : 365.00:00:00
LitigationHoldDate       : 10/25/2021 6:54:57 PM
LitigationHoldOwner      : admin@contoso.com
InPlaceHolds             : {}
ComplianceTagHoldApplied : False
...
DisplayName              : Carol Olson
Name                     : carolo
DistinguishedName        : CN=carolo,OU=Soft Deleted
                           Objects,OU=contoso.onmicrosoft.com,OU=Microsoft Exchange
                           Hosted Organizations,DC=NAMPR06A007,DC=PROD,DC=OUTLOOK,DC=COM
ExchangeGuid             : e646a369-00bf-43d3-837a-8eae8b301d44
IsInactiveMailbox        : True
LitigationHoldEnabled    : False
LitigationHoldDuration   : Unlimited
LitigationHoldDate       :
LitigationHoldOwner      :
InPlaceHolds             : {mbxcdbbb86ce60342489bff371876e7f224:3}
ComplianceTagHoldApplied : False
...
DisplayName              : Megan Bowen
Name                     : meganb
DistinguishedName        : CN=meganb,OU=Soft Deleted
                           Objects,OU=contoso.onmicrosoft.com,OU=Microsoft Exchange
                           Hosted Organizations,DC=NAMPR06A007,DC=PROD,DC=OUTLOOK,DC=COM
ExchangeGuid             : 36ec77cb-c524-468a-a8e8-bfb75e01a176
IsInactiveMailbox        : True
LitigationHoldEnabled    : False
LitigationHoldDuration   : Unlimited
LitigationHoldDate       :
LitigationHoldOwner      :
InPlaceHolds             : {mbx6fe063689d404a5bb9940eed0f0bf5d2:1}
ComplianceTagHoldApplied : True
...
DisplayName              : Mario Necaise
Name                     : marion
DistinguishedName        : CN=marion,OU=Soft Deleted
                           Objects,OU=contoso.onmicrosoft.com,OU=Microsoft Exchange
                           Hosted Organizations,DC=NAMPR06A007,DC=PROD,DC=OUTLOOK,DC=COM
ExchangeGuid             : 0579e039-a695-40d5-8f0a-0dc04f4b4c8f
IsInactiveMailbox        : True
LitigationHoldEnabled    : False
LitigationHoldDuration   : Unlimited
LitigationHoldDate       :
LitigationHoldOwner      :
InPlaceHolds             : {}
ComplianceTagHoldApplied : False
...
DisplayName              : Abraham McMahon
Name                     : abrahamm
DistinguishedName        : CN=abrahamm,OU=Soft Deleted
                           Objects,OU=contoso.onmicrosoft.com,OU=Microsoft Exchange
                           Hosted Organizations,DC=NAMPR06A007,DC=PROD,DC=OUTLOOK,DC=COM
ExchangeGuid             : 55ad8905-4e68-4c8d-940d-e068ec6b51fc
IsInactiveMailbox        : True
LitigationHoldEnabled    : False
LitigationHoldDuration   : Unlimited
LitigationHoldDate       :
LitigationHoldOwner      :
InPlaceHolds             : {UniH7d895d48-7e23-4a8d-8346-533c3beac15d}
ComplianceTagHoldApplied : False
...
DisplayName              : Pilar Pinilla
Name                     : pilarp
DistinguishedName        : CN=pilarp,OU=Soft Deleted
                           Objects,OU=contoso.onmicrosoft.com,OU=Microsoft Exchange
                           Hosted Organizations,DC=NAMPR06A007,DC=PROD,DC=OUTLOOK,DC=COM
ExchangeGuid             : 8d7867d6-bb6d-4cd8-a51f-09d208f97fcc
IsInactiveMailbox        : True
LitigationHoldEnabled    : False
LitigationHoldDuration   : Unlimited
LitigationHoldDate       :
LitigationHoldOwner      :
InPlaceHolds             : {c0ba3ce811b6432a8751430937152491}
ComplianceTagHoldApplied : False

The following table identifies the six different hold types that were used to make each mailbox inactive from the above example.

Inactive mailbox Hold type How to identify the hold on the inactive mailbox
Ann Beebe
Litigation Hold
The LitigationHoldEnabled property is set to True indicating the mailbox is on Litigation Hold.

Additionally, the LitigationHoldDuration is set to 365.00:00:00 indicating that mailbox items will no longer be subject to litigation hold 365 days after their creation date (sent/received).

The LitigationHoldDate indicates the date LitigationHold was enabled and LitigationHoldOwner identifies the person who initiated the litigation hold.
Carol Olson
Microsoft 365 retention policy from the Microsoft Purview portal or the Microsoft Purview compliance portal that is applied to specific mailboxes
The InPlaceHolds property contains the GUID of the Microsoft 365 retention policy that's applied to the inactive mailbox. You can identify the hold type is a retention policy that's applied to specific mailboxes because the GUID starts with the mbx prefix and ends in a :2 or :3.

For more information, see Understanding the format of the InPlaceHolds value for retention policies.
Megan Bowen
Microsoft 365 retention label with a retain-only, or retain and delete action is applied to at least one item in the mailbox
The ComplianceTagHoldApplied property is True indicating an item is labeled with a retain-only, or retain and delete label.

Additionally, the InPlaceHolds property contains the GUID of the Microsoft 365 retention label policy that's applied to the inactive mailbox.

For more information, see Identifying mailboxes on hold because a retention label has been applied to a folder or item
Mario Necaise
Organization-wide Microsoft 365 retention policy from the Microsoft Purview portal or the Microsoft Purview compliance portal
The InPlaceHolds property is empty, LitigationHoldEnabled is False and ComplianceTagHoldApplied is False. This result indicates that one or more entire (Exchange) location Microsoft 365 retention policies applied to the organization that the inactive mailbox is inheriting.

For more information, see How to confirm that an organization-wide retention policy is applied to a mailbox
Abraham McMahon
eDiscovery case hold in the Microsoft Purview portal or the Microsoft Purview compliance portal
The InPlaceHolds property contains the GUID of the eDiscovery case hold that's placed on the inactive mailbox. You can tell this result is an eDiscovery case hold because the GUID starts with the UniH prefix.

For more information, see eDiscovery holds.
Pilar Pinilla
In-Place Hold
The InPlaceHolds property contains the GUID of the In-Place Hold that's placed on the inactive mailbox. You can tell this result is an In-Place Hold because the GUID doesn't start with a prefix.

NOTE: As of October 1, 2020, the hold duration of in-place holds can no longer be changed. You can only remove an In-Place Hold that results in the deletion of the inactive mailbox.

For more information, see Retirement of legacy eDiscovery tools.

Step 2: Change the hold duration for an inactive mailbox

After you identify what type of hold is placed on the inactive mailbox (and whether there are multiple holds), the next step is to change the duration for the hold. The process varies depending on the type of hold applied.

Change the duration for a Microsoft 365 retention policy

In order to modify the hold duration for a Microsoft 365 retention policy, you must first identify the policy affecting the inactive mailbox by running Get-RetentionCompliancePolicy with the associated GUID from the InPlaceHolds property on the mailbox in Security & Compliance PowerShell.

Be sure to remove the prefix and suffix from the GUID when running this command. For example, using our previous sample information, take the InPlaceHolds value of mbxcdbbb86ce60342489bff371876e7f224:3 then remove mbx and :3 resulting in a policy GUID of cdbbb86ce60342489bff371876e7f224. In this example, run:

Get-RetentionCompliancePolicy cdbbb86ce60342489bff371876e7f224 | FL Name

Once you know the name of the policy, you can simply modify the retention policy in the Microsoft Purview portal or the Microsoft Purview compliance portal. Retention policies are typically applied to more than one location, so modifying the policy affects all applied locations - both inactive and active, which may also include locations other than Exchange. For more information, see Create and configure retention policies.

Important

Retention policies with preservation lock enabled can have the retention period extended, but not decreased or removed.

If the intention is to modify the retention period for only inactive mailboxes, or only specific inactive mailboxes, you may consider deploying adaptive policy scopes, which can be used to individually target specific mailboxes - or mailbox types, such as inactive mailboxes - using Microsoft Entra ID and Exchange attributes and properties.

Change the duration for a Microsoft 365 retention label

As with retention policies, when you modify the hold duration of a Microsoft 365 retention label, you must first identify the policy that publishes the label affecting the content within the inactive mailbox. To identify that policy, run Get-RetentionCompliancePolicy with the associated GUID from the InPlaceHolds property on the mailbox in Security & Compliance PowerShell.

Be sure to remove the prefix and suffix from the GUID when running this command. For example, using the previous sample information, you take the InPlaceHolds value of mbx6fe063689d404a5bb9940eed0f0bf5d2:1 then remove mbx and :1, which results in a policy GUID of 6fe063689d404a5bb9940eed0f0bf5d2. In this example, you run:

Get-RetentionCompliancePolicy 6fe063689d404a5bb9940eed0f0bf5d2 | FL Name

After you identify the policy, you'll know which labels have been published and their settings. Because labels apply to individual items, depending on the number of labels published with the policy and their settings, you may not be able to directly identify which label is affecting the content.

One method that you can use to identify the content each label applies to is to use Content Search. For example, using the previous sample information, assume the policy publishes several labels, one of which is named "HR-Content". With the correct permissions, you can run a Content Search with the New-ComplianceSearch PowerShell command, specify the inactive mailbox's primary SMTP address, pre-pended with a period (.), and the -AllowNotFoundExchangeLocationsEnabled $true parameter to skip validation:

New-ComplianceSearch -Name "MeganB Inactive Mailbox HR-Content Label Search" -ExchangeLocation .meganb@contoso.onmicrosoft.com -AllowNotFoundExchangeLocationsEnabled $true -ContentMatchQuery "compliancetag=HR-Content"

After the search is created, start the search using the following command:

Start-ComplianceSearch "MeganB Inactive Mailbox HR-Content Label Search"

Using this method, you can then identify which labels from the identified label policy apply to content within the inactive mailbox so that you can modify their retention periods. Retention labels are typically applied to more than one location, so modifying a label affects all applied locations and labeled content, which may also include locations and content other than Exchange. For more information, see Publish retention labels and apply them in apps.

Note

Not all types of retention labels can be modified. For some labels, you may only be able to increase the time of retention, and for others you may not be able to modify the retention period at all.

Change the duration for an eDiscovery Hold

Holds associated with eDiscovery cases are indefinite holds, which means there's no hold duration that can be changed. Items are held forever or until the hold is removed or the case is closed.

Change the duration for a Litigation Hold

You must use Exchange Online PowerShell to change the hold duration for a Litigation Hold that is placed on an inactive mailbox. You can't use the Exchange admin center. Run the following command to change the hold duration. In this example, the hold duration is changed to an unlimited period of time:

Set-Mailbox -InactiveMailbox -Identity <identity of inactive mailbox> -LitigationHoldDuration unlimited

The result is that items in the inactive mailbox are retained indefinitely or until the hold is removed or the hold duration is changed to a different value.

Tip

The best way to identify an inactive mailbox is by using its Distinguished Name or Exchange GUID value. Using one of these values helps prevent accidentally specifying the wrong mailbox.

Change the duration for an In-Place Hold

In-Place Holds are retired and can no longer be modified. If an inactive mailbox has an In-Place Hold applied to it, you can't change the hold duration. You can only remove the In-Place Hold, which will result in the deletion of the inactive mailbox. For more information, see Delete an inactive mailbox.

More information

  • How is the hold duration calculated for an item in an inactive mailbox? The duration is calculated from the original date a mailbox item was received or created.

  • What happens when the hold duration expires? When the hold duration expires for a mailbox item in the Recoverable Items folder, the item is permanently deleted (purged) from the inactive mailbox. If there's no duration specified for the hold placed on the inactive mailbox, items in the Recoverable Items folder are never purged (unless the hold duration for the inactive mailbox is changed).

  • Is an Exchange MRM policy still processed on inactive mailboxes? If an MRM retention policy was applied to a mailbox before it went inactive, any deletion policies (MRM retention tags configured with a Delete action) continue to be processed on the inactive mailbox. That means items that are tagged with an MRM deletion policy are be moved to the Recoverable Items folder when the retention period expires. Those items are purged from the inactive mailbox when the hold duration expires. If a hold duration isn't specified for the inactive mailbox, items in the Recover Items folder are retained indefinitely.

    Conversely, any archive policies (MRM retention tags configured with a MoveToArchive action) that are included in the MRM retention policy assigned to an inactive mailbox are ignored. That means items in an inactive mailbox that are tagged with an archive policy remain in the primary mailbox when the retention period expires. They're not moved to the archive mailbox or to the Recoverable Items folder in the archive mailbox. They are retained indefinitely.

    Note

    Applying an Exchange retention policy (the messaging records management, or MRM, feature in Exchange Online) does not create an inactive mailbox when the user account is deleted.

  • As with regular mailboxes, the Managed Folder Assistant (MFA) also processes inactive mailboxes. In Exchange Online, the MFA processes mailboxes approximately once every seven days. After you change the hold duration for an inactive mailbox, you can use the Start-ManagedFolderAssistant cmdlet to immediately start processing the new hold duration for the inactive mailbox. Run the following command.

    Start-ManagedFolderAssistant -InactiveMailbox <identity of inactive mailbox>
    
  • If many InPlaceHolds are placed on an inactive mailbox, not all of the hold GUIDs will be displayed. You can run the following command to display the GUIDs for all InPlaceHolds that are placed on an inactive mailbox.

    Get-Mailbox -InactiveMailboxOnly -Identity <identity of inactive mailbox> | Select-Object -ExpandProperty InPlaceHolds