แก้ไข

แชร์ผ่าน

Use Azure Blob storage Container Storage Interface (CSI) driver

  • บทความ

The Azure Blob storage Container Storage Interface (CSI) driver is a CSI specification-compliant driver used by Azure Kubernetes Service (AKS) to manage the lifecycle of Azure Blob storage. The CSI is a standard for exposing arbitrary block and file storage systems to containerized workloads on Kubernetes.

By adopting and using CSI, AKS now can write, deploy, and iterate plug-ins to expose new or improve existing storage systems in Kubernetes. Using CSI drivers in AKS avoids having to touch the core Kubernetes code and wait for its release cycles.

When you mount Azure Blob storage as a file system into a container or pod, it enables you to use blob storage with a number of applications that work massive amounts of unstructured data. For example:

  • Log file data
  • Images, documents, and streaming video or audio
  • Disaster recovery data

The data on the object storage can be accessed by applications using BlobFuse or Network File System (NFS) 3.0 protocol. Before the introduction of the Azure Blob storage CSI driver, the only option was to manually install an unsupported driver to access Blob storage from your application running on AKS. When the Azure Blob storage CSI driver is enabled on AKS, there are two built-in storage classes: azureblob-fuse-premium and azureblob-nfs-premium.

To create an AKS cluster with CSI drivers support, see CSI drivers on AKS. To learn more about the differences in access between each of the Azure storage types using the NFS protocol, see Compare access to Azure Files, Blob Storage, and Azure NetApp Files with NFS.

Azure Blob storage CSI driver features

Azure Blob storage CSI driver supports the following features:

  • BlobFuse and Network File System (NFS) version 3.0 protocol

Before you begin

  • Make sure that you have the Azure CLI version 2.42 or later installed and configured. Run az --version to find the version. If you need to install or upgrade, see Install Azure CLI. If you have installed the Azure CLI aks-preview extension, make sure that you update the extension to the latest version by calling az extension update --name aks-preview.

  • Perform the steps in this link if you previously installed the CSI Blob Storage open-source driver to access Azure Blob storage from your cluster.

Note

If the blobfuse-proxy is not enabled during the installation of the open source driver, the uninstallation of the open source driver will disrupt existing blobfuse mounts. However, NFS mounts will remain unaffected.

Enable CSI driver on a new or existing AKS cluster

Using the Azure CLI, you can enable the Blob storage CSI driver on a new or existing AKS cluster before you configure a persistent volume for use by pods in the cluster.

To enable the driver on a new cluster, include the --enable-blob-driver parameter with the az aks create command as shown in the following example:

az aks create \
    --enable-blob-driver \
    --name myAKSCluster \
    --resource-group myResourceGroup \
    --generate-ssh-keys

To enable the driver on an existing cluster, include the --enable-blob-driver parameter with the az aks update command as shown in the following example:

az aks update --enable-blob-driver --name myAKSCluster --resource-group myResourceGroup

You're prompted to confirm there isn't an open-source Blob CSI driver installed. After you confirm, it may take several minutes to complete this action. Once it's complete, you should see in the output the status of enabling the driver on your cluster. The following example resembles the section indicating the results of the previous command:

"storageProfile": {
    "blobCsiDriver": {
      "enabled": true
    },

Disable CSI driver on an existing AKS cluster

Using the Azure CLI, you can disable the Blob storage CSI driver on an existing AKS cluster after you remove the persistent volume from the cluster.

To disable the driver on an existing cluster, include the --disable-blob-driver parameter with the az aks update command as shown in the following example:

az aks update --disable-blob-driver --name myAKSCluster --resource-group myResourceGroup

Use a persistent volume with Azure Blob storage

A persistent volume (PV) represents a piece of storage that's provisioned for use with Kubernetes pods. A PV can be used by one or many pods and can be dynamically or statically provisioned. If multiple pods need concurrent access to the same storage volume, you can use Azure Blob storage to connect by using the Network File System (NFS) or blobfuse. This article shows you how to dynamically create an Azure Blob storage container for use by multiple pods in an AKS cluster.

For more information on Kubernetes volumes, see Storage options for applications in AKS.

Dynamically create Azure Blob storage PVs by using the built-in storage classes

A storage class is used to define how an Azure Blob storage container is created. A storage account is automatically created in the node resource group for use with the storage class to hold the Azure Blob storage container. Choose one of the following Azure storage redundancy SKUs for skuName:

  • Standard_LRS: Standard locally redundant storage
  • Premium_LRS: Premium locally redundant storage
  • Standard_ZRS: Standard zone redundant storage
  • Premium_ZRS: Premium zone redundant storage
  • Standard_GRS: Standard geo-redundant storage
  • Standard_RAGRS: Standard read-access geo-redundant storage

When you use storage CSI drivers on AKS, there are two additional built-in StorageClasses that use the Azure Blob CSI storage driver.

The reclaim policy on both storage classes ensures that the underlying Azure Blob storage is deleted when the respective PV is deleted. The storage classes also configure the container to be expandable by default, as the set allowVolumeExpansion parameter is set to true.

Note

Shrinking persistent volumes is not supported.

Use the kubectl get sc command to see the storage classes. The following example shows the azureblob-fuse-premium and azureblob-nfs-premium storage classes available within an AKS cluster:

NAME                                  PROVISIONER       RECLAIMPOLICY   VOLUMEBINDINGMODE      ALLOWVOLUMEEXPANSION     AGE
azureblob-fuse-premium               blob.csi.azure.com   Delete          Immediate              true                   23h
azureblob-nfs-premium                blob.csi.azure.com   Delete          Immediate              true                   23h

To use these storage classes, create a PVC and respective pod that references and uses them. A PVC is used to automatically provision storage based on a storage class. A PVC can use one of the pre-created storage classes or a user-defined storage class to create an Azure Blob storage container for the desired SKU, size, and protocol to communicate with it. When you create a pod definition, the PVC is specified to request the desired storage.

Using a StatefulSet

To have a storage volume persist for your workload, you can use a StatefulSet. This makes it easier to match existing volumes to new Pods that replace any that have failed. The following examples demonstrate how to set up a StatefulSet for Blob storage using either Blobfuse or the NFS protocol.

Prerequisites

  • Your AKS cluster Control plane identity (that is, your AKS cluster name) is added to the Contributor role on the VNet and network security group.

  1. Create a file named azure-blob-nfs-ss.yaml and copy in the following YAML.

    apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: statefulset-blob-nfs
  labels:
    app: nginx
spec:
  serviceName: statefulset-blob-nfs
  replicas: 1
  template:
    metadata:
      labels:
        app: nginx
    spec:
      nodeSelector:
        "kubernetes.io/os": linux
      containers:
        - name: statefulset-blob-nfs
          image: mcr.microsoft.com/oss/nginx/nginx:1.22
          volumeMounts:
            - name: persistent-storage
              mountPath: /mnt/blob
  updateStrategy:
    type: RollingUpdate
  selector:
    matchLabels:
      app: nginx
  volumeClaimTemplates:
    - metadata:
        name: persistent-storage
      spec:
        storageClassName: azureblob-nfs-premium
        accessModes: ["ReadWriteMany"]
        resources:
          requests:
            storage: 100Gi

  2. Create the StatefulSet with the kubectl create command:

    kubectl create -f azure-blob-nfs-ss.yaml

Next steps