แก้ไข

แชร์ผ่าน

Use Azure tags in Azure Kubernetes Service (AKS)

  • บทความ

With Azure Kubernetes Service (AKS), you can set Azure tags on an AKS cluster and its related resources using Azure Resource Manager and the Azure CLI. You can also use Kubernetes manifests to set Azure tags for certain resources. Azure tags are a useful tracking resource for certain business processes, such as chargeback.

This article explains how to set Azure tags for AKS clusters and related resources.

Before you begin

Review the following information before you begin:

  • Tags set on an AKS cluster apply to all resources related to the cluster, but not the node pools. This operation overwrites the values of existing keys.
  • Tags set on a node pool apply only to resources related to that node pool. This operation overwrites the values of existing keys. Resources outside that node pool, including resources for the rest of the cluster and other node pools, are unaffected.
  • Public IPs, files, and disks can have tags set by Kubernetes through a Kubernetes manifest. Tags set in this way maintain the Kubernetes values, even if you update them later using a different method. When you remove public IPs, files, or disks through Kubernetes, any tags set by Kubernetes are removed. The tags on those resources that Kubernetes doesn't track remain unaffected.

Prerequisites

  • The Azure CLI version 2.0.59 or later. To find your version, run az --version. If you need to install it or update your version, see Install Azure CLI.
  • Kubernetes version 1.20 or later.

Limitations

  • Azure tags have keys that are case-insensitive for operations, such as when you're retrieving a tag by searching the key. In this case, a tag with the specified key is updated or retrieved regardless of casing. Tag values are case-sensitive.
  • In AKS, if multiple tags are set with identical keys but different casing, the tags are used in alphabetical order. For example, {"Key1": "val1", "kEy1": "val2", "key1": "val3"} results in Key1 and val1 being set.
  • For shared resources, tags can't determine the split in resource usage on their own.

Azure tags and AKS clusters

When you create or update an AKS cluster with the --tags parameter, the following are assigned the Azure tags that you specified:

  • The AKS cluster itself and its related resources:
    • Route table
    • Public IP
    • Load balancer
    • Network security group
    • Virtual network
    • AKS-managed kubelet msi
    • AKS-managed add-on msi
    • Private DNS zone associated with the private cluster
    • Private endpoint associated with the private cluster
  • The node resource group

Note

Azure Private DNS only supports 15 tags. For more information, see the tag resources.

Create or update tags on an AKS cluster

Create a new AKS cluster

Important

If you're using existing resources when you create a new cluster, such as an IP address or route table, the az aks create command overwrites the set of tags. If you delete the cluster later, any tags set by the cluster are removed.

  1. Create a cluster and assign Azure tags using the az aks create command with the --tags parameter.

    Note

    To set tags on the initial node pool, the virtual machine scale set, and each virtual machine scale set instance associated with the initial node pool, you can also set the --nodepool-tags parameter.

    az aks create \
    --resource-group myResourceGroup \
    --name myAKSCluster \
    --tags dept=IT costcenter=9999 \
    --generate-ssh-keys

  2. Verify the tags have been applied to the cluster and its related resources using the az aks show command.

    az aks show --resource-group myResourceGroup --name myAKSCluster --query '[tags]'

    The following example output shows the tags applied to the cluster:

    {
  "clusterTags": {
    "dept": "IT",
    "costcenter": "9999"
  }
}

Update an existing AKS cluster

Important

Setting tags on a cluster using the az aks update command overwrites the set of tags. For example, if your cluster has the tags dept=IT and costcenter=9999, and you use az aks update with the tags team=alpha and costcenter=1234, the new list of tags would be team=alpha and costcenter=1234.

  1. Update the tags on an existing cluster using the az aks update command with the --tags parameter.

    az aks update \
    --resource-group myResourceGroup \
    --name myAKSCluster \
    --tags team=alpha costcenter=1234

  2. Verify the tags have been applied to the cluster and its related resources using the az aks show command.

    az aks show --resource-group myResourceGroup --name myAKSCluster --query '[tags]'

    The following example output shows the tags applied to the cluster:

    {
  "clusterTags": {
    "team": "alpha",
    "costcenter": "1234"
  }
}

Add tags to node pools

You can apply an Azure tag to a new or existing node pool in your AKS cluster. Tags applied to a node pool are applied to each node within the node pool and are persisted through upgrades. Tags are also applied to new nodes that are added to a node pool during scale-out operations. Adding a tag can help with tasks such as policy tracking or cost estimation.

When you create or update a node pool with the --tags parameter, the tags you specify are assigned to the following resources:

  • The node pool.
  • The virtual machine scale set and each virtual machine scale set instance associated with the node pool.

Create a new node pool

  1. Create a node pool with an Azure tag using the az aks nodepool add command with the --tags parameter.

    az aks nodepool add \
    --resource-group myResourceGroup \
    --cluster-name myAKSCluster \
    --name tagnodepool \
    --node-count 1 \
    --tags abtest=a costcenter=5555 \
    --no-wait

  2. Verify that the tags have been applied to the node pool using the az aks show command.

    az aks show --resource-group myResourceGroup --name myAKSCluster --query 'agentPoolProfiles[].{nodepoolName:name,tags:tags}'

    The following example output shows the tags applied to the node pool:

    [
  {
    "nodepoolName": "nodepool1",
    "tags": null
  },
  {
    "nodepoolName": "tagnodepool",
    "tags": {
      "abtest": "a",
      "costcenter": "5555"
    }
  }
]

Update an existing node pool

Important

Setting tags on a node pool using the az aks nodepool update command overwrites the set of tags. For example, if your node pool has the tags abtest=a and costcenter=5555, and you use az aks nodepool update with the tags appversion=0.0.2 and costcenter=4444, the new list of tags would be appversion=0.0.2 and costcenter=4444.

  1. Update a node pool with an Azure tag using the az aks nodepool update command.

    az aks nodepool update \
    --resource-group myResourceGroup \
    --cluster-name myAKSCluster \
    --name tagnodepool \
    --tags appversion=0.0.2 costcenter=4444 \
    --no-wait

  2. Verify the tags have been applied to the node pool using the az aks show command.

    az aks show --resource-group myResourceGroup --name myAKSCluster --query 'agentPoolProfiles[].{nodepoolName:name,tags:tags}'

    The following example output shows the tags applied to the node pool:

    [
  {
    "nodepoolName": "nodepool1",
    "tags": null
  },
  {
    "nodepoolName": "tagnodepool",
    "tags": {
      "appversion": "0.0.2",
      "costcenter": "4444"
    }
  }
]

Add tags using Kubernetes

Important

Setting tags on files, disks, and public IPs using Kubernetes updates the set of tags. For example, if your disk has the tags dept=IT and costcenter=5555, and you use Kubernetes to set the tags team=beta and costcenter=3333, the new list of tags would be dept=IT, team=beta, and costcenter=3333.

Any updates you make to tags through Kubernetes retain the value set through Kubernetes. For example, if your disk has tags dept=IT and costcenter=5555 set by Kubernetes, and you use the portal to set the tags team=beta and costcenter=3333, the new list of tags would be dept=IT, team=beta, and costcenter=5555. If you then remove the disk through Kubernetes, the disk would have the tag team=beta.

You can apply Azure tags to public IPs, disks, and files using a Kubernetes manifest.

  • For public IPs, use service.beta.kubernetes.io/azure-pip-tags under annotations. For example:

    apiVersion: v1
kind: Service
metadata:
  annotations:
    service.beta.kubernetes.io/azure-pip-tags: costcenter=3333,team=beta
spec:
  ...

  • For files and disks, use tags under parameters. For example:

    ---
apiVersion: storage.k8s.io/v1
...
parameters:
  ...
  tags: costcenter=3333,team=beta
...

Next steps

Learn more about using labels in an AKS cluster.