แก้ไข

แชร์ผ่าน

Add Wi-Fi settings for Android (AOSP) devices in Microsoft Intune

  • บทความ

You can create a profile with specific Wi-Fi settings, and then deploy this profile to your Android Open Source Project (AOSP) devices. Microsoft Intune offers many features, including authenticating to your network, using a pre-shared key, and more.

This feature applies to:

  • Android (AOSP)

This article describes these settings. Use Wi-Fi on your devices includes more information about the Wi-Fi feature in Microsoft Intune.

For more information on AOSP, go to Android Open Source Project (opens Android's website).

Before you begin

Basic

  • Wi-Fi type: Select Basic.

  • Network name: Enter a name for this Wi-Fi connection. End users see this name when they browse their device for available Wi-Fi connections. For example, enter Contoso WiFi.

  • SSID: Enter the service set identifier, which is the real name of the wireless network that devices connect to. However, users only see the network name you configured when they choose the connection.

  • Connect automatically: Enable automatically connects to your Wi-Fi network when devices are in range. Select Disable to prevent or block this automatic connection.

    When devices are connected to another preferred Wi-Fi connection, then they won't automatically connect to this Wi-Fi network. If devices fail to connect automatically when this setting is enabled, then disconnect the devices from any existing Wi-Fi connections.

  • Hidden network: Select Enable to hide this network from the list of available networks on the device. The SSID isn't broadcasted. Select Disable to show this network in the list of available networks on the device.

  • Wi-Fi type: Select the security protocol to authenticate to the Wi-Fi network. Your options:

    • Open (no authentication): Only use this option if the network is unsecured.

    • WEP-Pre-shared key: Enter the password in Pre-shared key (PSK). When your organization's network is set up or configured, a password or network key is also configured. Enter this password or network key for the PSK value.

      Warning

      On Android 12 and later, Google deprecated support for WEP pre-shared keys (PSK) in Wi-Fi configuration profiles. It's possible WEP might still work. But, it's not recommended and is considered obsolete. Instead, use WPA pre-shared keys (PSK) in your Wi-Fi configuration profiles.

      For more information, go to the Android developer reference - WifiConfiguration.GroupCipher.

    • WPA-Pre-shared key: Enter the password in Pre-shared key (PSK). When your organization's network is set up or configured, a password or network key is also configured. Enter this password or network key for the PSK value.

  • Proxy settings: Select a proxy configuration. Your options:

    • None: No proxy settings are configured.

    • Manual: Manually configure the proxy settings:

      • Proxy server address: Enter the IP address of the proxy server. For example, enter 10.0.0.22.

      • Port number: Enter the port number of the proxy server. For example, enter 8080.

      • Exclusion list: Enter a hostname or IP address that won't use the proxy. You can use the * wildcard character and enter multiple host names and IP addresses. If you enter multiple host names or IP addresses, they must be on a separate line. For example, you can enter:

        *.contoso.com
test.contoso1.com
mysite.contoso2.com
10.0.0.5
10.0.0.6

    • Automatic: Use a file to configure the proxy server. Enter the Proxy server URL that contains the configuration file. For example, enter http://proxy.contoso.com, 10.0.0.11, or http://proxy.contoso.com/proxy.pac.

      For more information on PAC files, see Proxy Auto-Configuration (PAC) file (opens a non-Microsoft site).

Enterprise

  • Wi-Fi type: Select Enterprise.

  • SSID: Enter the service set identifier, which is the real name of the wireless network that devices connect to. However, users only see the network name you configured when they choose the connection.

  • Connect automatically: Enable automatically connects to your Wi-Fi network when devices are in range. Select Disable to prevent or block this automatic connection.

    When devices are connected to another preferred Wi-Fi connection, then they won't automatically connect to this Wi-Fi network. If devices fail to connect automatically when this setting is enabled, then disconnect the devices from any existing Wi-Fi connections.

  • Hidden network: Select Enable to hide this network from the list of available networks on the device. The SSID isn't broadcasted. Select Disable to show this network in the list of available networks on the device.

  • EAP type: Select the Extensible Authentication Protocol (EAP) type used to authenticate secured wireless connections. Your options:

    • EAP-TLS: To authenticate, the Extensible Authentication Protocol (EAP) Transport Layer Security (TLS) uses a digital certificate on the server, and a digital certificate on the client. Both certificates are signed by a certificate authority (CA) that the server and client trust.

      Also enter:

      • Radius server name: Enter the DNS name that's used in the certificate presented by the Radius Server during client authentication to the Wi-Fi access point. For example, enter Contoso.com, uk.contoso.com, or jp.contoso.com.

        If you have multiple Radius servers with the same DNS suffix in their fully qualified domain name, then you can enter only the suffix. For example, you can enter contoso.com.

        When you enter this value, user devices can bypass the dynamic trust dialog that's sometimes shown when connecting to the Wi-Fi network.

        On Android 11 and newer, new Wi-Fi profiles may require this setting be configured. Otherwise, the devices may not connect to your Wi-Fi network.

      • Root certificate for server validation: Select one or more existing trusted root certificate profiles. When the client connects to the network, these certificates are used to establish a chain of trust with the server. If your authentication server uses a public certificate, then you don't need to include a root certificate.

      • Identity privacy (outer identity): Enter the text sent in the response to an EAP identity request. This text can be any value, such as anonymous. During authentication, this anonymous identity is initially sent, and then followed by the real identification sent in a secure tunnel.​

    • EAP-TTLS: To authenticate, the Extensible Authentication Protocol (EAP) Tunneled Transport Layer Security (TTLS) uses a digital certificate on the server. When the client makes the authentication request, the server uses the tunnel, which is a secure connection, to complete the authentication request.

      Also enter:

      • Radius server name: Enter the DNS name that's used in the certificate presented by the Radius Server during client authentication to the Wi-Fi access point. For example, enter Contoso.com, uk.contoso.com, or jp.contoso.com.

        If you have multiple Radius servers with the same DNS suffix in their fully qualified domain name, then you can enter only the suffix. For example, you can enter contoso.com.

        When you enter this value, user devices can bypass the dynamic trust dialog that's sometimes shown when connecting to the Wi-Fi network.

        On Android 11 and newer, new Wi-Fi profiles may require this setting be configured. Otherwise, the devices may not connect to your Wi-Fi network.

      • Root certificate for server validation: Select one or more existing trusted root certificate profiles. When the client connects to the network, these certificates are used to establish a chain of trust with the server. If your authentication server uses a public certificate, then you don't need to include a root certificate.

      • Certificates: Select the SCEP or PKCS client certificate profile that's also deployed to the device. This certificate is the identity presented by the device to the server to authenticate the connection.

      • Identity privacy (outer identity): Enter the text sent in the response to an EAP identity request. This text can be any value, such as anonymous. During authentication, this anonymous identity is initially sent, and then followed by the real identification sent in a secure tunnel.

    • PEAP: Protected Extensible Authentication Protocol (PEAP) encrypts and authenticates using a protected tunnel. Also enter:

      • Radius server name: Enter the DNS name that's used in the certificate presented by the Radius Server during client authentication to the Wi-Fi access point. For example, enter Contoso.com, uk.contoso.com, or jp.contoso.com.

        If you have multiple Radius servers with the same DNS suffix in their fully qualified domain name, then you can enter only the suffix. For example, you can enter contoso.com.

        When you enter this value, user devices can bypass the dynamic trust dialog that's sometimes shown when connecting to the Wi-Fi network.

        On Android 11 and newer, new Wi-Fi profiles may require this setting be configured. Otherwise, the devices may not connect to your Wi-Fi network.

      • Root certificate for server validation: Select one or more existing trusted root certificate profiles. When the client connects to the network, these certificates are used to establish a chain of trust with the server. If your authentication server uses a public certificate, then you don't need to include a root certificate.

      • Certificates: Select the SCEP or PKCS client certificate profile that's also deployed to the device. This certificate is the identity presented by the device to the server to authenticate the connection.

      • Identity privacy (outer identity): Enter the text sent in the response to an EAP identity request. This text can be any value, such as anonymous. During authentication, this anonymous identity is initially sent, and then followed by the real identification sent in a secure tunnel.

  • Proxy settings: Select a proxy configuration. Your options:

    • None: No proxy settings are configured.

    • Manual: Manually configure the proxy settings:

      • Proxy server address: Enter the IP address of the proxy server. For example, enter 10.0.0.22.

      • Port number: Enter the port number of the proxy server. For example, enter 8080.

      • Exclusion list: Enter a hostname or IP address that won't use the proxy. You can use the * wildcard character and enter multiple host names and IP addresses. If you enter multiple host names or IP addresses, they must be on a separate line. For example, you can enter:

        *.contoso.com
test.contoso1.com
mysite.contoso2.com
10.0.0.5
10.0.0.6

    • Automatic: Use a file to configure the proxy server. Enter the Proxy server URL that contains the configuration file. For example, enter http://proxy.contoso.com, 10.0.0.11, or http://proxy.contoso.com/proxy.pac.

      For more information on PAC files, see Proxy Auto-Configuration (PAC) file (opens a non-Microsoft site).

Next steps

The profile is created, but might not be doing anything. Be sure to assign this profile and monitor its status..

You can also create Wi-Fi profiles for Android Enterprise, iOS/iPadOS, macOS, and Windows.

Troubleshoot common issues with Wi-Fi profiles.