แก้ไข

แชร์ผ่าน


Configure media bypass with Direct Routing

Before configuring media bypass with Direct Routing, be sure you read Plan for media bypass with Direct Routing.

To turn on media bypass, the following conditions must be met:

  1. Make sure that your Session Border Controller (SBC) vendor of choice supports media bypass and provides instructions on how to configure bypass on the SBC. To learn about SBCs, which ones support media bypass, and for instructions, see the certification page.

  2. You need to turn on media bypass on the trunk using the following command: Set-CSOnlinePSTNGateway -Identity <sbc_FQDN> -MediaBypass $true.

  3. Make sure that the required ports are opened.

Migrate from non-bypassed trunks to bypass-enabled trunks

You can switch all users at once or you can implement a phased approached (recommended).

  • Switch all users at once. If all conditions are met, you can turn on bypass mode. However, all your production users are switched at the same time. Because you might experience some issues initially when you configure trunks and ports, your production user experience might be affected.

  • Phased approach. (Recommended). Create a new trunk for the same SBC (with a different port), test it, and change the online voice routing policy for the users to point to the new trunk.

    This approach is recommended because it allows for a smoother transition and uninterrupted user experience. This approach requires configuration of the SBC, a new FQDN name, and configuration of the firewall. Note you'll need to make sure that your certificate supports both trunks. In SAN, you need to have two names (sbc1.contoso.com and sbc2.contoso.com) or have a wildcard certificate.

Migrate from non-bypassed trunks to bypass-enabled trunks).

For instructions on how to configure the trunks and perform migration, see the documentation from your SBC vendor:

For a list of Session Border Controllers (SBCs) certified for Direct Routing, see List of Session Border Controllers certified for Direct Routing.

Plan media bypass with Direct Routing