Create or modify a network site in Lync Server 2013

บทความ
07/23/2014

Topic Last Modified: 2013-02-24

Call admission control (CAC), E9-1-1, and media bypass deployments rely on the configuration of network sites which are defined within and always associated with a network region. A network site represents a branch office location, a set of buildings, or a campus. Network sites represent collections of subnets with similar bandwidth.

Use the following procedures to create or modify network sites. For example, if you have already created network sites for one Voice feature, you do not need to create new network sites; other Voice features will use those same sites. You may, however, need to modify an existing network site definition to apply feature-specific settings. For example, if you created a network site for E9-1-1, you need to modify the network site during deployment of call admission control to apply a bandwidth policy profile.

Note

Where they exist, you can find specific examples and requirements for network sites as they pertain to an advanced Voice feature in the Deployment documentation for each feature:

Configure network sites for CAC in Lync Server 2013

For details about working with network sites, see the Lync Server Management Shell documentation for the following cmdlets:

Create a Network Site

Create a network region that can be used by call admission control, E9-1-1, or media bypass.

To create a network site by using Management Shell

Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013, and then click Lync Server Management Shell.
Run the New-CsNetworkSite cmdlet to create network sites:
```
New-CsNetworkSite -NetworkSiteID <string>
```
For example:
```
New-CsNetworkSite -NetworkSiteID Chicago -Description "Corporate headquarters"-NetworkRegionID NorthAmerica
```
In this example, you created a network site called “Chicago” that is in the “NorthAmerica” network region.

Note

The NorthAmerica network region must already exist for this command to run successfully.
To finish creating network sites for your topology, repeat step 2 with settings for other sites.

To create a network site by using Lync Server Control Panel

Open a browser window, and then enter the Admin URL to open the Lync Server Control Panel. For details about the different methods you can use to start Lync Server Control Panel, see Open Lync Server 2013 administrative tools.
In the left navigation bar, click Network Configuration.
Click the Site navigation button.
Click New.
On the New Site page, click Name and then type a name for the network site.
Click Region, and then click a region in the list.
Optionally, click Bandwidth policy, and then click a bandwidth policy in the list.

Note

Bandwidth policy is required only if you deploy call admission control at the site.
Optionally, click Location policy, and then click a location policy in the list.

Note

Location policy is required only if you deploy E9-1-1 at the site.
Optionally, click Description, and then type additional information to describe this network site.
Click Commit.
To finish creating network sites for your topology, repeat steps 4 through 10 with settings for other sites.

Modify a Network Site

Modify a network region that can be used by call admission control, E9-1-1, or media bypass.

To modify a network site

Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013, and then click Lync Server Management Shell.
Run the Set-CsNetworkSite cmdlet to modify network sites:
```
Set-CsNetworkSite -Identity <string>
```
For example:
```
Set-CsNetworkSite -Identity Albuquerque -NetworkRegionID NorthAmerica
```
In this example, the site called “Albuquerque” is moved to the “NorthAmerica” network region. To modify the network site configuration to deploy call admission control, E9-1-1, or media bypass, modify the network site settings by running the Set-CsNetworkSite cmdlet with the BWPolicyProfileID or LocationPolicy parameter, respectively.

Note

Although the BypassID parameter exists for media bypass, we strongly recommend that you do not override automatically generated bypass IDs. You do not need to specify additional parameters to configure a network site for media bypass.
To finish modifying network sites for your topology, repeat step 2 with settings for other sites.

To modify a network site by using Lync Server Control Panel

Open a browser window, and then enter the Admin URL to open the Lync Server Control Panel. For details about the different methods you can use to start Lync Server Control Panel, see Open Lync Server 2013 administrative tools.
In the left navigation bar, click Network Configuration.
Click the Site navigation button.
In the table, click the network site that you want to modify.
Click Edit, and then click Show details….
On the Edit Site page, change the values for this network site’s settings as appropriate.
Click Commit.
To finish modify network sites, repeat steps 4 through 7 with settings for other sites.

แชร์ผ่าน