Stopwatch.ElapsedMilliseconds Özellik
Tanım
Önemli
Bazı bilgiler ürünün ön sürümüyle ilgilidir ve sürüm öncesinde önemli değişiklikler yapılmış olabilir. Burada verilen bilgilerle ilgili olarak Microsoft açık veya zımni hiçbir garanti vermez.
Geçerli örnek tarafından milisaniye cinsinden ölçülen toplam süreyi alır.
public:
property long ElapsedMilliseconds { long get(); };public long ElapsedMilliseconds { get; }member this.ElapsedMilliseconds : int64Public ReadOnly Property ElapsedMilliseconds As LongÖzellik Değeri
Geçerli örnek tarafından ölçülen toplam milisaniye sayısını temsil eden salt okunur uzun bir tamsayı.
Örnekler
Aşağıdaki örnek, bir dizeden Stopwatch tamsayı ayrıştırmak için dört farklı uygulamanın performansını ölçmek için sınıfını kullanır. Bu kod örneği, sınıfı için Stopwatch sağlanan daha büyük bir örneğin parçasıdır.
private static void TimeOperations()
{
long nanosecPerTick = (1000L*1000L*1000L) / Stopwatch.Frequency;
const long numIterations = 10000;
// Define the operation title names.
String [] operationNames = {"Operation: Int32.Parse(\"0\")",
"Operation: Int32.TryParse(\"0\")",
"Operation: Int32.Parse(\"a\")",
"Operation: Int32.TryParse(\"a\")"};
// Time four different implementations for parsing
// an integer from a string.
for (int operation = 0; operation <= 3; operation++)
{
// Define variables for operation statistics.
long numTicks = 0;
long numRollovers = 0;
long maxTicks = 0;
long minTicks = Int64.MaxValue;
int indexFastest = -1;
int indexSlowest = -1;
long milliSec = 0;
Stopwatch time10kOperations = Stopwatch.StartNew();
// Run the current operation 10001 times.
// The first execution time will be tossed
// out, since it can skew the average time.
for (int i=0; i<=numIterations; i++)
{
long ticksThisTime = 0;
int inputNum;
Stopwatch timePerParse;
switch (operation)
{
case 0:
// Parse a valid integer using
// a try-catch statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
try
{
inputNum = Int32.Parse("0");
}
catch (FormatException)
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
case 1:
// Parse a valid integer using
// the TryParse statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
if (!Int32.TryParse("0", out inputNum))
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
case 2:
// Parse an invalid value using
// a try-catch statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
try
{
inputNum = Int32.Parse("a");
}
catch (FormatException)
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
case 3:
// Parse an invalid value using
// the TryParse statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
if (!Int32.TryParse("a", out inputNum))
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
default:
break;
}
// Skip over the time for the first operation,
// just in case it caused a one-time
// performance hit.
if (i == 0)
{
time10kOperations.Reset();
time10kOperations.Start();
}
else
{
// Update operation statistics
// for iterations 1-10000.
if (maxTicks < ticksThisTime)
{
indexSlowest = i;
maxTicks = ticksThisTime;
}
if (minTicks > ticksThisTime)
{
indexFastest = i;
minTicks = ticksThisTime;
}
numTicks += ticksThisTime;
if (numTicks < ticksThisTime)
{
// Keep track of rollovers.
numRollovers ++;
}
}
}
// Display the statistics for 10000 iterations.
time10kOperations.Stop();
milliSec = time10kOperations.ElapsedMilliseconds;
Console.WriteLine();
Console.WriteLine("{0} Summary:", operationNames[operation]);
Console.WriteLine(" Slowest time: #{0}/{1} = {2} ticks",
indexSlowest, numIterations, maxTicks);
Console.WriteLine(" Fastest time: #{0}/{1} = {2} ticks",
indexFastest, numIterations, minTicks);
Console.WriteLine(" Average time: {0} ticks = {1} nanoseconds",
numTicks / numIterations,
(numTicks * nanosecPerTick) / numIterations );
Console.WriteLine(" Total time looping through {0} operations: {1} milliseconds",
numIterations, milliSec);
}
}
Private Shared Sub TimeOperations()
Dim nanosecPerTick As Long = 1000000000 / Stopwatch.Frequency
Const numIterations As Long = 10000
' Define the operation title names.
Dim operationNames As String() = _
{"Operation: Int32.Parse(""0"")", _
"Operation: Int32.TryParse(""0"")", _
"Operation: Int32.Parse(""a"")", _
"Operation: Int32.TryParse(""a"")"}
' Time four different implementations for parsing
' an integer from a string.
Dim operation As Integer
For operation = 0 To 3
' Define variables for operation statistics.
Dim numTicks As Long = 0
Dim numRollovers As Long = 0
Dim maxTicks As Long = 0
Dim minTicks As Long = Int64.MaxValue
Dim indexFastest As Integer = - 1
Dim indexSlowest As Integer = - 1
Dim milliSec As Long = 0
Dim time10kOperations As Stopwatch = Stopwatch.StartNew()
' Run the current operation 10001 times.
' The first execution time will be tossed
' out, since it can skew the average time.
Dim i As Integer
For i = 0 To numIterations
Dim ticksThisTime As Long = 0
Dim inputNum As Integer
Dim timePerParse As Stopwatch
Select Case operation
Case 0
' Parse a valid integer using
' a try-catch statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
Try
inputNum = Int32.Parse("0")
Catch e As FormatException
inputNum = 0
End Try
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case 1
' Parse a valid integer using
' the TryParse statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
If Not Int32.TryParse("0", inputNum) Then
inputNum = 0
End If
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case 2
' Parse an invalid value using
' a try-catch statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
Try
inputNum = Int32.Parse("a")
Catch e As FormatException
inputNum = 0
End Try
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case 3
' Parse an invalid value using
' the TryParse statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
If Not Int32.TryParse("a", inputNum) Then
inputNum = 0
End If
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case Else
End Select
' Skip over the time for the first operation,
' just in case it caused a one-time
' performance hit.
If i = 0 Then
time10kOperations.Reset()
time10kOperations.Start()
Else
' Update operation statistics
' for iterations 1-10001.
If maxTicks < ticksThisTime Then
indexSlowest = i
maxTicks = ticksThisTime
End If
If minTicks > ticksThisTime Then
indexFastest = i
minTicks = ticksThisTime
End If
numTicks += ticksThisTime
If numTicks < ticksThisTime Then
' Keep track of rollovers.
numRollovers += 1
End If
End If
Next i
' Display the statistics for 10000 iterations.
time10kOperations.Stop()
milliSec = time10kOperations.ElapsedMilliseconds
Console.WriteLine()
Console.WriteLine("{0} Summary:", operationNames(operation))
Console.WriteLine(" Slowest time: #{0}/{1} = {2} ticks", _
indexSlowest, numIterations, maxTicks)
Console.WriteLine(" Fastest time: #{0}/{1} = {2} ticks", _
indexFastest, numIterations, minTicks)
Console.WriteLine(" Average time: {0} ticks = {1} nanoseconds", _
numTicks / numIterations, numTicks * nanosecPerTick / numIterations)
Console.WriteLine(" Total time looping through {0} operations: {1} milliseconds", _
numIterations, milliSec)
Next operation
End Sub
Açıklamalar
Bu özellik, en yakın tam milisaniye değerine aşağı yuvarlanan geçen süreyi temsil eder. Daha yüksek duyarlıklı ölçümler için veya Elapsed özelliklerini kullanınElapsedTicks.
Örnek çalışırken veya durdurulurken Elapsed , ElapsedMillisecondsve ElapsedTicks özelliklerini Stopwatchsorgulayabilirsiniz. Stopwatch çalışırken geçen zaman özellikleri sürekli olarak artar; örnek durdurulduğunda sabit kalır.
Varsayılan olarak, bir Stopwatch örneğin geçen zaman değeri tüm ölçülen zaman aralıklarının toplamına eşittir. Start çağrılarının her biri, geçen kümülatif sürede saymaya başlar; her Stop çağrısı geçerli aralık ölçümlerini sona erdirir ve kümülatif geçen zaman değerini dondurar. Mevcut bir Reset örneğinde geçen kümülatif süreyi temizlemek için Stopwatch yöntemini kullanın.
