Point Oluşturucular
Tanım
Önemli
Bazı bilgiler ürünün ön sürümüyle ilgilidir ve sürüm öncesinde önemli değişiklikler yapılmış olabilir. Burada verilen bilgilerle ilgili olarak Microsoft açık veya zımni hiçbir garanti vermez.
Belirtilen koordinatlarla yapının yeni bir örneğini Point başlatır.
Aşırı Yüklemeler
| Veri Akışı Adı | Description |
|---|---|
| Point(Size) | |
| Point(Int32) |
Tamsayı değeriyle belirtilen koordinatları kullanarak yapının yeni bir örneğini Point başlatır. |
| Point(Int32, Int32) |
Belirtilen koordinatlarla yapının yeni bir örneğini Point başlatır. |
Point(Size)
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
public:
Point(System::Drawing::Size sz);
public Point(System.Drawing.Size sz);
new System.Drawing.Point : System.Drawing.Size -> System.Drawing.Point
Public Sub New (sz As Size)
Parametreler
Örnekler
Aşağıdaki kod örneği, işlecinin Equality nasıl kullanılacağını ve bir Point veya iki tamsayıdan nasıl oluşturacaklarını Size gösterir. Ayrıca ve X özelliklerinin nasıl kullanılacağını Y da gösterir. Bu örnek, Windows Forms ile kullanılacak şekilde tasarlanmıştır. Kodu adlı Button1düğmeyi içeren bir forma yapıştırın ve yöntemini düğmenin Button1_ClickClick olayıyla ilişkilendirin.
private:
void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
{
// Construct a new Point with integers.
Point Point1 = Point(100,100);
// Create a Graphics object.
Graphics^ formGraphics = this->CreateGraphics();
// Construct another Point, this time using a Size.
Point Point2 = Point(System::Drawing::Size( 100, 100 ));
// Call the equality operator to see if the points are equal,
// and if so print out their x and y values.
if ( Point1 == Point2 )
{
array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
formGraphics->DrawString( String::Format( "Point1.X: "
"{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
}
}
private void Button1_Click(System.Object sender, System.EventArgs e)
{
// Construct a new Point with integers.
Point Point1 = new Point(100, 100);
// Create a Graphics object.
Graphics formGraphics = this.CreateGraphics();
// Construct another Point, this time using a Size.
Point Point2 = new Point(new Size(100, 100));
// Call the equality operator to see if the points are equal,
// and if so print out their x and y values.
if (Point1 == Point2)
{
formGraphics.DrawString(String.Format("Point1.X: " +
"{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
this.Font, Brushes.Black, new PointF(10, 70));
}
}
Private Sub Button1_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles Button1.Click
' Construct a new Point with integers.
Dim Point1 As New Point(100, 100)
' Create a Graphics object.
Dim formGraphics As Graphics = Me.CreateGraphics()
' Construct another Point, this time using a Size.
Dim Point2 As New Point(New Size(100, 100))
' Call the equality operator to see if the points are equal,
' and if so print out their x and y values.
If (Point.op_Equality(Point1, Point2)) Then
formGraphics.DrawString(String.Format("Point1.X: " & _
"{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
Me.Font, Brushes.Black, New PointF(10, 70))
End If
End Sub
Şunlara uygulanır
Point(Int32)
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
Tamsayı değeriyle belirtilen koordinatları kullanarak yapının yeni bir örneğini Point başlatır.
public:
Point(int dw);
public Point(int dw);
new System.Drawing.Point : int -> System.Drawing.Point
Public Sub New (dw As Integer)
Parametreler
Örnekler
Aşağıdaki kod örneği, ve Point oluşturucularının ve numaralandırmasının Size.Size nasıl kullanılacağını System.Drawing.ContentAlignment gösterir. Bu örneği çalıştırmak için, bu kodu Label1 adlı etiketi içeren bir Windows Formuna yapıştırın ve formun oluşturucusunda InitializeLabel1 yöntemini çağırın.
void InitializeLabel1()
{
// Set a border.
Label1->BorderStyle = BorderStyle::FixedSingle;
// Set the size, constructing a size from two integers.
Label1->Size = System::Drawing::Size( 100, 50 );
// Set the location, constructing a point from a 32-bit integer
// (using hexadecimal).
Label1->Location = Point(0x280028);
// Set and align the text on the lower-right side of the label.
Label1->TextAlign = ContentAlignment::BottomRight;
Label1->Text = "Bottom Right Alignment";
}
private void InitializeLabel1()
{
// Set a border.
Label1.BorderStyle = BorderStyle.FixedSingle;
// Set the size, constructing a size from two integers.
Label1.Size = new Size(100, 50);
// Set the location, constructing a point from a 32-bit integer
// (using hexadecimal).
Label1.Location = new Point(0x280028);
// Set and align the text on the lower-right side of the label.
Label1.TextAlign = ContentAlignment.BottomRight;
Label1.Text = "Bottom Right Alignment";
}
Private Sub InitializeLabel1()
' Set a border.
Label1.BorderStyle = BorderStyle.FixedSingle
' Set the size, constructing a size from two integers.
Label1.Size = New Size(100, 50)
' Set the location, constructing a point from a 32-bit integer
' (using hexadecimal).
Label1.Location = New Point(&H280028)
' Set and align the text on the lower-right side of the label.
Label1.TextAlign = ContentAlignment.BottomRight
Label1.Text = "Bottom Right Alignment"
End Sub
Açıklamalar
Parametresinin düşük sıralı 16 biti dw yatay x koordinatını, daha yüksek 16 bit ise yeni Pointiçin dikey y koordinatını belirtir.
Şunlara uygulanır
Point(Int32, Int32)
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
- Kaynak:
- Point.cs
Belirtilen koordinatlarla yapının yeni bir örneğini Point başlatır.
public:
Point(int x, int y);
public Point(int x, int y);
new System.Drawing.Point : int * int -> System.Drawing.Point
Public Sub New (x As Integer, y As Integer)
Parametreler
- x
- Int32
Noktanın yatay konumu.
- y
- Int32
Noktanın dikey konumu.
Örnekler
Aşağıdaki kod örneği, işlecinin Equality nasıl kullanılacağını ve bir Point veya iki tamsayıdan nasıl oluşturacaklarını Size gösterir. Ayrıca ve X özelliklerinin nasıl kullanılacağını Y da gösterir. Bu örnek, Windows Forms ile kullanılacak şekilde tasarlanmıştır. Kodu adlı Button1düğmeyi içeren bir forma yapıştırın ve yöntemini düğmenin Button1_ClickClick olayıyla ilişkilendirin.
private:
void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
{
// Construct a new Point with integers.
Point Point1 = Point(100,100);
// Create a Graphics object.
Graphics^ formGraphics = this->CreateGraphics();
// Construct another Point, this time using a Size.
Point Point2 = Point(System::Drawing::Size( 100, 100 ));
// Call the equality operator to see if the points are equal,
// and if so print out their x and y values.
if ( Point1 == Point2 )
{
array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
formGraphics->DrawString( String::Format( "Point1.X: "
"{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
}
}
private void Button1_Click(System.Object sender, System.EventArgs e)
{
// Construct a new Point with integers.
Point Point1 = new Point(100, 100);
// Create a Graphics object.
Graphics formGraphics = this.CreateGraphics();
// Construct another Point, this time using a Size.
Point Point2 = new Point(new Size(100, 100));
// Call the equality operator to see if the points are equal,
// and if so print out their x and y values.
if (Point1 == Point2)
{
formGraphics.DrawString(String.Format("Point1.X: " +
"{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
this.Font, Brushes.Black, new PointF(10, 70));
}
}
Private Sub Button1_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles Button1.Click
' Construct a new Point with integers.
Dim Point1 As New Point(100, 100)
' Create a Graphics object.
Dim formGraphics As Graphics = Me.CreateGraphics()
' Construct another Point, this time using a Size.
Dim Point2 As New Point(New Size(100, 100))
' Call the equality operator to see if the points are equal,
' and if so print out their x and y values.
If (Point.op_Equality(Point1, Point2)) Then
formGraphics.DrawString(String.Format("Point1.X: " & _
"{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
Me.Font, Brushes.Black, New PointF(10, 70))
End If
End Sub