MethodBuilder.GetILGenerator Yöntem
Önemli
Bazı bilgiler ürünün ön sürümüyle ilgilidir ve sürüm öncesinde önemli değişiklikler yapılmış olabilir. Burada verilen bilgilerle ilgili olarak Microsoft açık veya zımni hiçbir garanti vermez.
Bu yöntem için bir ILGenerator döndürür.
| GetILGenerator() |
Varsayılan Microsoft ara dili (MSIL) akış boyutu 64 bayt olan bu yöntem için bir |
| GetILGenerator(Int32) |
Belirtilen Microsoft ara dili (MSIL) akış boyutuna sahip bu yöntem için bir |
- Kaynak:
- MethodBuilder.cs
- Kaynak:
- MethodBuilder.cs
- Kaynak:
- MethodBuilder.cs
Varsayılan Microsoft ara dili (MSIL) akış boyutu 64 bayt olan bu yöntem için bir ILGenerator döndürür.
public:
System::Reflection::Emit::ILGenerator ^ GetILGenerator();C#
public System.Reflection.Emit.ILGenerator GetILGenerator ();member this.GetILGenerator : unit -> System.Reflection.Emit.ILGeneratorPublic Function GetILGenerator () As ILGeneratorDöndürülenler
Bu yöntem için bir ILGenerator nesnesi döndürür.
Özel durumlar
Yöntemin veya MethodImplAttributes bayrakları nedeniyleMethodAttributes, örneğin bayrağı olduğundan PinvokeImpl bir gövdesi olmamalıdır.
-veya-
yöntemi genel bir yöntemdir, ancak genel bir yöntem tanımı değildir. Başka bir ifadeyle IsGenericMethod , özelliği şeklindedir true, ancak IsGenericMethodDefinition özelliği şeklindedir false.
Örnekler
Aşağıdaki kod örneği, yöntemin GetILGenerator bağlamsal kullanımını gösterir ve 3B alanda iki noktanın nokta çarpımını hesaplayacak dinamik bir derleme oluşturur ve yayar.
using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ DynamicDotProductGen()
{
Type^ ivType = nullptr;
array<Type^>^temp0 = {int::typeid,int::typeid,int::typeid};
array<Type^>^ctorParams = temp0;
AppDomain^ myDomain = Thread::GetDomain();
AssemblyName^ myAsmName = gcnew AssemblyName;
myAsmName->Name = "IntVectorAsm";
AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
ModuleBuilder^ IntVectorModule = myAsmBuilder->DefineDynamicModule( "IntVectorModule", "Vector.dll" );
TypeBuilder^ ivTypeBld = IntVectorModule->DefineType( "IntVector", TypeAttributes::Public );
FieldBuilder^ xField = ivTypeBld->DefineField( "x", int::typeid, FieldAttributes::Private );
FieldBuilder^ yField = ivTypeBld->DefineField( "y", int::typeid, FieldAttributes::Private );
FieldBuilder^ zField = ivTypeBld->DefineField( "z", int::typeid, FieldAttributes::Private );
Type^ objType = Type::GetType( "System.Object" );
ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
ConstructorBuilder^ ivCtor = ivTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
ILGenerator^ ctorIL = ivCtor->GetILGenerator();
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Call, objCtor );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_1 );
ctorIL->Emit( OpCodes::Stfld, xField );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_2 );
ctorIL->Emit( OpCodes::Stfld, yField );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_3 );
ctorIL->Emit( OpCodes::Stfld, zField );
ctorIL->Emit( OpCodes::Ret );
// This method will find the dot product of the stored vector
// with another.
array<Type^>^temp1 = {ivTypeBld};
array<Type^>^dpParams = temp1;
// Here, you create a MethodBuilder containing the
// name, the attributes (public, static, private, and so on),
// the return type (int, in this case), and a array of Type
// indicating the type of each parameter. Since the sole parameter
// is a IntVector, the very class you're creating, you will
// pass in the TypeBuilder (which is derived from Type) instead of
// a Type object for IntVector, avoiding an exception.
// -- This method would be declared in C# as:
// public int DotProduct(IntVector aVector)
MethodBuilder^ dotProductMthd = ivTypeBld->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, dpParams );
// A ILGenerator can now be spawned, attached to the MethodBuilder.
ILGenerator^ mthdIL = dotProductMthd->GetILGenerator();
// Here's the body of our function, in MSIL form. We're going to find the
// "dot product" of the current vector instance with the passed vector
// instance. For reference purposes, the equation is:
// (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
// First, you'll load the reference to the current instance "this"
// stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
// instruction, will pop the reference off the stack and look up the
// field "x", specified by the FieldInfo token "xField".
mthdIL->Emit( OpCodes::Ldarg_0 );
mthdIL->Emit( OpCodes::Ldfld, xField );
// That completed, the value stored at field "x" is now atop the stack.
// Now, you'll do the same for the Object reference we passed as a
// parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
// you'll have the value stored in field "x" for the passed instance
// atop the stack.
mthdIL->Emit( OpCodes::Ldarg_1 );
mthdIL->Emit( OpCodes::Ldfld, xField );
// There will now be two values atop the stack - the "x" value for the
// current vector instance, and the "x" value for the passed instance.
// You'll now multiply them, and push the result onto the evaluation stack.
mthdIL->Emit( OpCodes::Mul_Ovf_Un );
// Now, repeat this for the "y" fields of both vectors.
mthdIL->Emit( OpCodes::Ldarg_0 );
mthdIL->Emit( OpCodes::Ldfld, yField );
mthdIL->Emit( OpCodes::Ldarg_1 );
mthdIL->Emit( OpCodes::Ldfld, yField );
mthdIL->Emit( OpCodes::Mul_Ovf_Un );
// At this time, the results of both multiplications should be atop
// the stack. You'll now add them and push the result onto the stack.
mthdIL->Emit( OpCodes::Add_Ovf_Un );
// Multiply both "z" field and push the result onto the stack.
mthdIL->Emit( OpCodes::Ldarg_0 );
mthdIL->Emit( OpCodes::Ldfld, zField );
mthdIL->Emit( OpCodes::Ldarg_1 );
mthdIL->Emit( OpCodes::Ldfld, zField );
mthdIL->Emit( OpCodes::Mul_Ovf_Un );
// Finally, add the result of multiplying the "z" fields with the
// result of the earlier addition, and push the result - the dot product -
// onto the stack.
mthdIL->Emit( OpCodes::Add_Ovf_Un );
// The "ret" opcode will pop the last value from the stack and return it
// to the calling method. You're all done!
mthdIL->Emit( OpCodes::Ret );
ivType = ivTypeBld->CreateType();
return ivType;
}
int main()
{
Type^ IVType = nullptr;
Object^ aVector1 = nullptr;
Object^ aVector2 = nullptr;
array<Type^>^temp2 = {int::typeid,int::typeid,int::typeid};
array<Type^>^aVtypes = temp2;
array<Object^>^temp3 = {10,10,10};
array<Object^>^aVargs1 = temp3;
array<Object^>^temp4 = {20,20,20};
array<Object^>^aVargs2 = temp4;
// Call the method to build our dynamic class.
IVType = DynamicDotProductGen();
Console::WriteLine( "---" );
ConstructorInfo^ myDTctor = IVType->GetConstructor( aVtypes );
aVector1 = myDTctor->Invoke( aVargs1 );
aVector2 = myDTctor->Invoke( aVargs2 );
array<Object^>^passMe = gcnew array<Object^>(1);
passMe[ 0 ] = dynamic_cast<Object^>(aVector2);
Console::WriteLine( "(10, 10, 10) . (20, 20, 20) = {0}", IVType->InvokeMember( "DotProduct", BindingFlags::InvokeMethod, nullptr, aVector1, passMe ) );
}
// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600
C#
using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;
class TestILGenerator
{
public static Type DynamicDotProductGen()
{
Type ivType = null;
Type[] ctorParams = new Type[] { typeof(int),
typeof(int),
typeof(int)};
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "IntVectorAsm";
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.RunAndSave);
ModuleBuilder IntVectorModule = myAsmBuilder.DefineDynamicModule("IntVectorModule",
"Vector.dll");
TypeBuilder ivTypeBld = IntVectorModule.DefineType("IntVector",
TypeAttributes.Public);
FieldBuilder xField = ivTypeBld.DefineField("x", typeof(int),
FieldAttributes.Private);
FieldBuilder yField = ivTypeBld.DefineField("y", typeof(int),
FieldAttributes.Private);
FieldBuilder zField = ivTypeBld.DefineField("z", typeof(int),
FieldAttributes.Private);
Type objType = Type.GetType("System.Object");
ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);
ConstructorBuilder ivCtor = ivTypeBld.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
ctorParams);
ILGenerator ctorIL = ivCtor.GetILGenerator();
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Call, objCtor);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_1);
ctorIL.Emit(OpCodes.Stfld, xField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_2);
ctorIL.Emit(OpCodes.Stfld, yField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_3);
ctorIL.Emit(OpCodes.Stfld, zField);
ctorIL.Emit(OpCodes.Ret);
// This method will find the dot product of the stored vector
// with another.
Type[] dpParams = new Type[] { ivTypeBld };
// Here, you create a MethodBuilder containing the
// name, the attributes (public, static, private, and so on),
// the return type (int, in this case), and a array of Type
// indicating the type of each parameter. Since the sole parameter
// is a IntVector, the very class you're creating, you will
// pass in the TypeBuilder (which is derived from Type) instead of
// a Type object for IntVector, avoiding an exception.
// -- This method would be declared in C# as:
// public int DotProduct(IntVector aVector)
MethodBuilder dotProductMthd = ivTypeBld.DefineMethod(
"DotProduct",
MethodAttributes.Public,
typeof(int),
dpParams);
// A ILGenerator can now be spawned, attached to the MethodBuilder.
ILGenerator mthdIL = dotProductMthd.GetILGenerator();
// Here's the body of our function, in MSIL form. We're going to find the
// "dot product" of the current vector instance with the passed vector
// instance. For reference purposes, the equation is:
// (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
// First, you'll load the reference to the current instance "this"
// stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
// instruction, will pop the reference off the stack and look up the
// field "x", specified by the FieldInfo token "xField".
mthdIL.Emit(OpCodes.Ldarg_0);
mthdIL.Emit(OpCodes.Ldfld, xField);
// That completed, the value stored at field "x" is now atop the stack.
// Now, you'll do the same for the object reference we passed as a
// parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
// you'll have the value stored in field "x" for the passed instance
// atop the stack.
mthdIL.Emit(OpCodes.Ldarg_1);
mthdIL.Emit(OpCodes.Ldfld, xField);
// There will now be two values atop the stack - the "x" value for the
// current vector instance, and the "x" value for the passed instance.
// You'll now multiply them, and push the result onto the evaluation stack.
mthdIL.Emit(OpCodes.Mul_Ovf_Un);
// Now, repeat this for the "y" fields of both vectors.
mthdIL.Emit(OpCodes.Ldarg_0);
mthdIL.Emit(OpCodes.Ldfld, yField);
mthdIL.Emit(OpCodes.Ldarg_1);
mthdIL.Emit(OpCodes.Ldfld, yField);
mthdIL.Emit(OpCodes.Mul_Ovf_Un);
// At this time, the results of both multiplications should be atop
// the stack. You'll now add them and push the result onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un);
// Multiply both "z" field and push the result onto the stack.
mthdIL.Emit(OpCodes.Ldarg_0);
mthdIL.Emit(OpCodes.Ldfld, zField);
mthdIL.Emit(OpCodes.Ldarg_1);
mthdIL.Emit(OpCodes.Ldfld, zField);
mthdIL.Emit(OpCodes.Mul_Ovf_Un);
// Finally, add the result of multiplying the "z" fields with the
// result of the earlier addition, and push the result - the dot product -
// onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un);
// The "ret" opcode will pop the last value from the stack and return it
// to the calling method. You're all done!
mthdIL.Emit(OpCodes.Ret);
ivType = ivTypeBld.CreateType();
return ivType;
}
public static void Main() {
Type IVType = null;
object aVector1 = null;
object aVector2 = null;
Type[] aVtypes = new Type[] {typeof(int), typeof(int), typeof(int)};
object[] aVargs1 = new object[] {10, 10, 10};
object[] aVargs2 = new object[] {20, 20, 20};
// Call the method to build our dynamic class.
IVType = DynamicDotProductGen();
Console.WriteLine("---");
ConstructorInfo myDTctor = IVType.GetConstructor(aVtypes);
aVector1 = myDTctor.Invoke(aVargs1);
aVector2 = myDTctor.Invoke(aVargs2);
object[] passMe = new object[1];
passMe[0] = (object)aVector2;
Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}",
IVType.InvokeMember("DotProduct",
BindingFlags.InvokeMethod,
null,
aVector1,
passMe));
// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600
}
}
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit
_
Class TestILGenerator
Public Shared Function DynamicDotProductGen() As Type
Dim ivType As Type = Nothing
Dim ctorParams() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
Dim myDomain As AppDomain = Thread.GetDomain()
Dim myAsmName As New AssemblyName()
myAsmName.Name = "IntVectorAsm"
Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
myAsmName, _
AssemblyBuilderAccess.RunAndSave)
Dim IntVectorModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule( _
"IntVectorModule", _
"Vector.dll")
Dim ivTypeBld As TypeBuilder = IntVectorModule.DefineType("IntVector", TypeAttributes.Public)
Dim xField As FieldBuilder = ivTypeBld.DefineField("x", _
GetType(Integer), _
FieldAttributes.Private)
Dim yField As FieldBuilder = ivTypeBld.DefineField("y", _
GetType(Integer), _
FieldAttributes.Private)
Dim zField As FieldBuilder = ivTypeBld.DefineField("z", _
GetType(Integer), _
FieldAttributes.Private)
Dim objType As Type = Type.GetType("System.Object")
Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
Dim ivCtor As ConstructorBuilder = ivTypeBld.DefineConstructor( _
MethodAttributes.Public, _
CallingConventions.Standard, _
ctorParams)
Dim ctorIL As ILGenerator = ivCtor.GetILGenerator()
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Call, objCtor)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_1)
ctorIL.Emit(OpCodes.Stfld, xField)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_2)
ctorIL.Emit(OpCodes.Stfld, yField)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_3)
ctorIL.Emit(OpCodes.Stfld, zField)
ctorIL.Emit(OpCodes.Ret)
' Now, you'll construct the method find the dot product of two vectors. First,
' let's define the parameters that will be accepted by the method. In this case,
' it's an IntVector itself!
Dim dpParams() As Type = {ivTypeBld}
' Here, you create a MethodBuilder containing the
' name, the attributes (public, static, private, and so on),
' the return type (int, in this case), and a array of Type
' indicating the type of each parameter. Since the sole parameter
' is a IntVector, the very class you're creating, you will
' pass in the TypeBuilder (which is derived from Type) instead of
' a Type object for IntVector, avoiding an exception.
' -- This method would be declared in VB.NET as:
' Public Function DotProduct(IntVector aVector) As Integer
Dim dotProductMthd As MethodBuilder = ivTypeBld.DefineMethod("DotProduct", _
MethodAttributes.Public, GetType(Integer), _
dpParams)
' A ILGenerator can now be spawned, attached to the MethodBuilder.
Dim mthdIL As ILGenerator = dotProductMthd.GetILGenerator()
' Here's the body of our function, in MSIL form. We're going to find the
' "dot product" of the current vector instance with the passed vector
' instance. For reference purposes, the equation is:
' (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
' First, you'll load the reference to the current instance "this"
' stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
' instruction, will pop the reference off the stack and look up the
' field "x", specified by the FieldInfo token "xField".
mthdIL.Emit(OpCodes.Ldarg_0)
mthdIL.Emit(OpCodes.Ldfld, xField)
' That completed, the value stored at field "x" is now atop the stack.
' Now, you'll do the same for the object reference we passed as a
' parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
' you'll have the value stored in field "x" for the passed instance
' atop the stack.
mthdIL.Emit(OpCodes.Ldarg_1)
mthdIL.Emit(OpCodes.Ldfld, xField)
' There will now be two values atop the stack - the "x" value for the
' current vector instance, and the "x" value for the passed instance.
' You'll now multiply them, and push the result onto the evaluation stack.
mthdIL.Emit(OpCodes.Mul_Ovf_Un)
' Now, repeat this for the "y" fields of both vectors.
mthdIL.Emit(OpCodes.Ldarg_0)
mthdIL.Emit(OpCodes.Ldfld, yField)
mthdIL.Emit(OpCodes.Ldarg_1)
mthdIL.Emit(OpCodes.Ldfld, yField)
mthdIL.Emit(OpCodes.Mul_Ovf_Un)
' At this time, the results of both multiplications should be atop
' the stack. You'll now add them and push the result onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un)
' Multiply both "z" field and push the result onto the stack.
mthdIL.Emit(OpCodes.Ldarg_0)
mthdIL.Emit(OpCodes.Ldfld, zField)
mthdIL.Emit(OpCodes.Ldarg_1)
mthdIL.Emit(OpCodes.Ldfld, zField)
mthdIL.Emit(OpCodes.Mul_Ovf_Un)
' Finally, add the result of multiplying the "z" fields with the
' result of the earlier addition, and push the result - the dot product -
' onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un)
' The "ret" opcode will pop the last value from the stack and return it
' to the calling method. You're all done!
mthdIL.Emit(OpCodes.Ret)
ivType = ivTypeBld.CreateType()
Return ivType
End Function 'DynamicDotProductGen
Public Shared Sub Main()
Dim IVType As Type = Nothing
Dim aVector1 As Object = Nothing
Dim aVector2 As Object = Nothing
Dim aVtypes() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
Dim aVargs1() As Object = {10, 10, 10}
Dim aVargs2() As Object = {20, 20, 20}
' Call the method to build our dynamic class.
IVType = DynamicDotProductGen()
Dim myDTctor As ConstructorInfo = IVType.GetConstructor(aVtypes)
aVector1 = myDTctor.Invoke(aVargs1)
aVector2 = myDTctor.Invoke(aVargs2)
Console.WriteLine("---")
Dim passMe(0) As Object
passMe(0) = CType(aVector2, Object)
Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}", _
IVType.InvokeMember("DotProduct", BindingFlags.InvokeMethod, _
Nothing, aVector1, passMe))
End Sub
End Class
' +++ OUTPUT +++
' ---
' (10, 10, 10) . (20, 20, 20) = 600
Şunlara uygulanır
.NET 9 ve diğer sürümler
| Ürün | Sürümler |
|---|---|
| .NET | Core 1.0, Core 1.1, Core 2.0, Core 2.1, Core 2.2, Core 3.0, Core 3.1, 5, 6, 7, 8, 9 |
| .NET Framework | 1.1, 2.0, 3.0, 3.5, 4.0, 4.5, 4.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2, 4.7, 4.7.1, 4.7.2, 4.8, 4.8.1 |
| .NET Standard | 2.0, 2.1 |
- Kaynak:
- MethodBuilder.cs
- Kaynak:
- MethodBuilder.cs
- Kaynak:
- MethodBuilder.cs
Belirtilen Microsoft ara dili (MSIL) akış boyutuna sahip bu yöntem için bir ILGenerator döndürür.
public:
System::Reflection::Emit::ILGenerator ^ GetILGenerator(int size);C#
public System.Reflection.Emit.ILGenerator GetILGenerator (int size);member this.GetILGenerator : int -> System.Reflection.Emit.ILGeneratorPublic Function GetILGenerator (size As Integer) As ILGeneratorParametreler
- size
- Int32
MSIL akışının bayt cinsinden boyutu.
Döndürülenler
Bu yöntem için bir ILGenerator nesnesi döndürür.
Özel durumlar
Yöntemin veya MethodImplAttributes bayrakları nedeniyleMethodAttributes, örneğin bayrağı olduğundan PinvokeImpl bir gövdesi olmamalıdır.
-veya-
yöntemi genel bir yöntemdir, ancak genel bir yöntem tanımı değildir. Başka bir ifadeyle IsGenericMethod , özelliği şeklindedir true, ancak IsGenericMethodDefinition özelliği şeklindedir false.
Örnekler
Aşağıdaki kod örneği, yöntemin GetILGenerator bağlamsal kullanımını gösterir ve 3B alanda iki noktanın nokta çarpımını hesaplayacak dinamik bir derleme oluşturur ve yayar.
using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ DynamicDotProductGen()
{
Type^ ivType = nullptr;
array<Type^>^temp0 = {int::typeid,int::typeid,int::typeid};
array<Type^>^ctorParams = temp0;
AppDomain^ myDomain = Thread::GetDomain();
AssemblyName^ myAsmName = gcnew AssemblyName;
myAsmName->Name = "IntVectorAsm";
AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
ModuleBuilder^ IntVectorModule = myAsmBuilder->DefineDynamicModule( "IntVectorModule", "Vector.dll" );
TypeBuilder^ ivTypeBld = IntVectorModule->DefineType( "IntVector", TypeAttributes::Public );
FieldBuilder^ xField = ivTypeBld->DefineField( "x", int::typeid, FieldAttributes::Private );
FieldBuilder^ yField = ivTypeBld->DefineField( "y", int::typeid, FieldAttributes::Private );
FieldBuilder^ zField = ivTypeBld->DefineField( "z", int::typeid, FieldAttributes::Private );
Type^ objType = Type::GetType( "System.Object" );
ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
ConstructorBuilder^ ivCtor = ivTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
ILGenerator^ ctorIL = ivCtor->GetILGenerator();
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Call, objCtor );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_1 );
ctorIL->Emit( OpCodes::Stfld, xField );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_2 );
ctorIL->Emit( OpCodes::Stfld, yField );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_3 );
ctorIL->Emit( OpCodes::Stfld, zField );
ctorIL->Emit( OpCodes::Ret );
// This method will find the dot product of the stored vector
// with another.
array<Type^>^temp1 = {ivTypeBld};
array<Type^>^dpParams = temp1;
// Here, you create a MethodBuilder containing the
// name, the attributes (public, static, private, and so on),
// the return type (int, in this case), and a array of Type
// indicating the type of each parameter. Since the sole parameter
// is a IntVector, the very class you're creating, you will
// pass in the TypeBuilder (which is derived from Type) instead of
// a Type object for IntVector, avoiding an exception.
// -- This method would be declared in C# as:
// public int DotProduct(IntVector aVector)
MethodBuilder^ dotProductMthd = ivTypeBld->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, dpParams );
// A ILGenerator can now be spawned, attached to the MethodBuilder.
ILGenerator^ mthdIL = dotProductMthd->GetILGenerator();
// Here's the body of our function, in MSIL form. We're going to find the
// "dot product" of the current vector instance with the passed vector
// instance. For reference purposes, the equation is:
// (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
// First, you'll load the reference to the current instance "this"
// stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
// instruction, will pop the reference off the stack and look up the
// field "x", specified by the FieldInfo token "xField".
mthdIL->Emit( OpCodes::Ldarg_0 );
mthdIL->Emit( OpCodes::Ldfld, xField );
// That completed, the value stored at field "x" is now atop the stack.
// Now, you'll do the same for the Object reference we passed as a
// parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
// you'll have the value stored in field "x" for the passed instance
// atop the stack.
mthdIL->Emit( OpCodes::Ldarg_1 );
mthdIL->Emit( OpCodes::Ldfld, xField );
// There will now be two values atop the stack - the "x" value for the
// current vector instance, and the "x" value for the passed instance.
// You'll now multiply them, and push the result onto the evaluation stack.
mthdIL->Emit( OpCodes::Mul_Ovf_Un );
// Now, repeat this for the "y" fields of both vectors.
mthdIL->Emit( OpCodes::Ldarg_0 );
mthdIL->Emit( OpCodes::Ldfld, yField );
mthdIL->Emit( OpCodes::Ldarg_1 );
mthdIL->Emit( OpCodes::Ldfld, yField );
mthdIL->Emit( OpCodes::Mul_Ovf_Un );
// At this time, the results of both multiplications should be atop
// the stack. You'll now add them and push the result onto the stack.
mthdIL->Emit( OpCodes::Add_Ovf_Un );
// Multiply both "z" field and push the result onto the stack.
mthdIL->Emit( OpCodes::Ldarg_0 );
mthdIL->Emit( OpCodes::Ldfld, zField );
mthdIL->Emit( OpCodes::Ldarg_1 );
mthdIL->Emit( OpCodes::Ldfld, zField );
mthdIL->Emit( OpCodes::Mul_Ovf_Un );
// Finally, add the result of multiplying the "z" fields with the
// result of the earlier addition, and push the result - the dot product -
// onto the stack.
mthdIL->Emit( OpCodes::Add_Ovf_Un );
// The "ret" opcode will pop the last value from the stack and return it
// to the calling method. You're all done!
mthdIL->Emit( OpCodes::Ret );
ivType = ivTypeBld->CreateType();
return ivType;
}
int main()
{
Type^ IVType = nullptr;
Object^ aVector1 = nullptr;
Object^ aVector2 = nullptr;
array<Type^>^temp2 = {int::typeid,int::typeid,int::typeid};
array<Type^>^aVtypes = temp2;
array<Object^>^temp3 = {10,10,10};
array<Object^>^aVargs1 = temp3;
array<Object^>^temp4 = {20,20,20};
array<Object^>^aVargs2 = temp4;
// Call the method to build our dynamic class.
IVType = DynamicDotProductGen();
Console::WriteLine( "---" );
ConstructorInfo^ myDTctor = IVType->GetConstructor( aVtypes );
aVector1 = myDTctor->Invoke( aVargs1 );
aVector2 = myDTctor->Invoke( aVargs2 );
array<Object^>^passMe = gcnew array<Object^>(1);
passMe[ 0 ] = dynamic_cast<Object^>(aVector2);
Console::WriteLine( "(10, 10, 10) . (20, 20, 20) = {0}", IVType->InvokeMember( "DotProduct", BindingFlags::InvokeMethod, nullptr, aVector1, passMe ) );
}
// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600
C#
using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;
class TestILGenerator
{
public static Type DynamicDotProductGen()
{
Type ivType = null;
Type[] ctorParams = new Type[] { typeof(int),
typeof(int),
typeof(int)};
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "IntVectorAsm";
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.RunAndSave);
ModuleBuilder IntVectorModule = myAsmBuilder.DefineDynamicModule("IntVectorModule",
"Vector.dll");
TypeBuilder ivTypeBld = IntVectorModule.DefineType("IntVector",
TypeAttributes.Public);
FieldBuilder xField = ivTypeBld.DefineField("x", typeof(int),
FieldAttributes.Private);
FieldBuilder yField = ivTypeBld.DefineField("y", typeof(int),
FieldAttributes.Private);
FieldBuilder zField = ivTypeBld.DefineField("z", typeof(int),
FieldAttributes.Private);
Type objType = Type.GetType("System.Object");
ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);
ConstructorBuilder ivCtor = ivTypeBld.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
ctorParams);
ILGenerator ctorIL = ivCtor.GetILGenerator();
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Call, objCtor);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_1);
ctorIL.Emit(OpCodes.Stfld, xField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_2);
ctorIL.Emit(OpCodes.Stfld, yField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_3);
ctorIL.Emit(OpCodes.Stfld, zField);
ctorIL.Emit(OpCodes.Ret);
// This method will find the dot product of the stored vector
// with another.
Type[] dpParams = new Type[] { ivTypeBld };
// Here, you create a MethodBuilder containing the
// name, the attributes (public, static, private, and so on),
// the return type (int, in this case), and a array of Type
// indicating the type of each parameter. Since the sole parameter
// is a IntVector, the very class you're creating, you will
// pass in the TypeBuilder (which is derived from Type) instead of
// a Type object for IntVector, avoiding an exception.
// -- This method would be declared in C# as:
// public int DotProduct(IntVector aVector)
MethodBuilder dotProductMthd = ivTypeBld.DefineMethod(
"DotProduct",
MethodAttributes.Public,
typeof(int),
dpParams);
// A ILGenerator can now be spawned, attached to the MethodBuilder.
ILGenerator mthdIL = dotProductMthd.GetILGenerator();
// Here's the body of our function, in MSIL form. We're going to find the
// "dot product" of the current vector instance with the passed vector
// instance. For reference purposes, the equation is:
// (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
// First, you'll load the reference to the current instance "this"
// stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
// instruction, will pop the reference off the stack and look up the
// field "x", specified by the FieldInfo token "xField".
mthdIL.Emit(OpCodes.Ldarg_0);
mthdIL.Emit(OpCodes.Ldfld, xField);
// That completed, the value stored at field "x" is now atop the stack.
// Now, you'll do the same for the object reference we passed as a
// parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
// you'll have the value stored in field "x" for the passed instance
// atop the stack.
mthdIL.Emit(OpCodes.Ldarg_1);
mthdIL.Emit(OpCodes.Ldfld, xField);
// There will now be two values atop the stack - the "x" value for the
// current vector instance, and the "x" value for the passed instance.
// You'll now multiply them, and push the result onto the evaluation stack.
mthdIL.Emit(OpCodes.Mul_Ovf_Un);
// Now, repeat this for the "y" fields of both vectors.
mthdIL.Emit(OpCodes.Ldarg_0);
mthdIL.Emit(OpCodes.Ldfld, yField);
mthdIL.Emit(OpCodes.Ldarg_1);
mthdIL.Emit(OpCodes.Ldfld, yField);
mthdIL.Emit(OpCodes.Mul_Ovf_Un);
// At this time, the results of both multiplications should be atop
// the stack. You'll now add them and push the result onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un);
// Multiply both "z" field and push the result onto the stack.
mthdIL.Emit(OpCodes.Ldarg_0);
mthdIL.Emit(OpCodes.Ldfld, zField);
mthdIL.Emit(OpCodes.Ldarg_1);
mthdIL.Emit(OpCodes.Ldfld, zField);
mthdIL.Emit(OpCodes.Mul_Ovf_Un);
// Finally, add the result of multiplying the "z" fields with the
// result of the earlier addition, and push the result - the dot product -
// onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un);
// The "ret" opcode will pop the last value from the stack and return it
// to the calling method. You're all done!
mthdIL.Emit(OpCodes.Ret);
ivType = ivTypeBld.CreateType();
return ivType;
}
public static void Main() {
Type IVType = null;
object aVector1 = null;
object aVector2 = null;
Type[] aVtypes = new Type[] {typeof(int), typeof(int), typeof(int)};
object[] aVargs1 = new object[] {10, 10, 10};
object[] aVargs2 = new object[] {20, 20, 20};
// Call the method to build our dynamic class.
IVType = DynamicDotProductGen();
Console.WriteLine("---");
ConstructorInfo myDTctor = IVType.GetConstructor(aVtypes);
aVector1 = myDTctor.Invoke(aVargs1);
aVector2 = myDTctor.Invoke(aVargs2);
object[] passMe = new object[1];
passMe[0] = (object)aVector2;
Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}",
IVType.InvokeMember("DotProduct",
BindingFlags.InvokeMethod,
null,
aVector1,
passMe));
// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600
}
}
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit
_
Class TestILGenerator
Public Shared Function DynamicDotProductGen() As Type
Dim ivType As Type = Nothing
Dim ctorParams() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
Dim myDomain As AppDomain = Thread.GetDomain()
Dim myAsmName As New AssemblyName()
myAsmName.Name = "IntVectorAsm"
Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
myAsmName, _
AssemblyBuilderAccess.RunAndSave)
Dim IntVectorModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule( _
"IntVectorModule", _
"Vector.dll")
Dim ivTypeBld As TypeBuilder = IntVectorModule.DefineType("IntVector", TypeAttributes.Public)
Dim xField As FieldBuilder = ivTypeBld.DefineField("x", _
GetType(Integer), _
FieldAttributes.Private)
Dim yField As FieldBuilder = ivTypeBld.DefineField("y", _
GetType(Integer), _
FieldAttributes.Private)
Dim zField As FieldBuilder = ivTypeBld.DefineField("z", _
GetType(Integer), _
FieldAttributes.Private)
Dim objType As Type = Type.GetType("System.Object")
Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
Dim ivCtor As ConstructorBuilder = ivTypeBld.DefineConstructor( _
MethodAttributes.Public, _
CallingConventions.Standard, _
ctorParams)
Dim ctorIL As ILGenerator = ivCtor.GetILGenerator()
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Call, objCtor)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_1)
ctorIL.Emit(OpCodes.Stfld, xField)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_2)
ctorIL.Emit(OpCodes.Stfld, yField)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_3)
ctorIL.Emit(OpCodes.Stfld, zField)
ctorIL.Emit(OpCodes.Ret)
' Now, you'll construct the method find the dot product of two vectors. First,
' let's define the parameters that will be accepted by the method. In this case,
' it's an IntVector itself!
Dim dpParams() As Type = {ivTypeBld}
' Here, you create a MethodBuilder containing the
' name, the attributes (public, static, private, and so on),
' the return type (int, in this case), and a array of Type
' indicating the type of each parameter. Since the sole parameter
' is a IntVector, the very class you're creating, you will
' pass in the TypeBuilder (which is derived from Type) instead of
' a Type object for IntVector, avoiding an exception.
' -- This method would be declared in VB.NET as:
' Public Function DotProduct(IntVector aVector) As Integer
Dim dotProductMthd As MethodBuilder = ivTypeBld.DefineMethod("DotProduct", _
MethodAttributes.Public, GetType(Integer), _
dpParams)
' A ILGenerator can now be spawned, attached to the MethodBuilder.
Dim mthdIL As ILGenerator = dotProductMthd.GetILGenerator()
' Here's the body of our function, in MSIL form. We're going to find the
' "dot product" of the current vector instance with the passed vector
' instance. For reference purposes, the equation is:
' (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
' First, you'll load the reference to the current instance "this"
' stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
' instruction, will pop the reference off the stack and look up the
' field "x", specified by the FieldInfo token "xField".
mthdIL.Emit(OpCodes.Ldarg_0)
mthdIL.Emit(OpCodes.Ldfld, xField)
' That completed, the value stored at field "x" is now atop the stack.
' Now, you'll do the same for the object reference we passed as a
' parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
' you'll have the value stored in field "x" for the passed instance
' atop the stack.
mthdIL.Emit(OpCodes.Ldarg_1)
mthdIL.Emit(OpCodes.Ldfld, xField)
' There will now be two values atop the stack - the "x" value for the
' current vector instance, and the "x" value for the passed instance.
' You'll now multiply them, and push the result onto the evaluation stack.
mthdIL.Emit(OpCodes.Mul_Ovf_Un)
' Now, repeat this for the "y" fields of both vectors.
mthdIL.Emit(OpCodes.Ldarg_0)
mthdIL.Emit(OpCodes.Ldfld, yField)
mthdIL.Emit(OpCodes.Ldarg_1)
mthdIL.Emit(OpCodes.Ldfld, yField)
mthdIL.Emit(OpCodes.Mul_Ovf_Un)
' At this time, the results of both multiplications should be atop
' the stack. You'll now add them and push the result onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un)
' Multiply both "z" field and push the result onto the stack.
mthdIL.Emit(OpCodes.Ldarg_0)
mthdIL.Emit(OpCodes.Ldfld, zField)
mthdIL.Emit(OpCodes.Ldarg_1)
mthdIL.Emit(OpCodes.Ldfld, zField)
mthdIL.Emit(OpCodes.Mul_Ovf_Un)
' Finally, add the result of multiplying the "z" fields with the
' result of the earlier addition, and push the result - the dot product -
' onto the stack.
mthdIL.Emit(OpCodes.Add_Ovf_Un)
' The "ret" opcode will pop the last value from the stack and return it
' to the calling method. You're all done!
mthdIL.Emit(OpCodes.Ret)
ivType = ivTypeBld.CreateType()
Return ivType
End Function 'DynamicDotProductGen
Public Shared Sub Main()
Dim IVType As Type = Nothing
Dim aVector1 As Object = Nothing
Dim aVector2 As Object = Nothing
Dim aVtypes() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
Dim aVargs1() As Object = {10, 10, 10}
Dim aVargs2() As Object = {20, 20, 20}
' Call the method to build our dynamic class.
IVType = DynamicDotProductGen()
Dim myDTctor As ConstructorInfo = IVType.GetConstructor(aVtypes)
aVector1 = myDTctor.Invoke(aVargs1)
aVector2 = myDTctor.Invoke(aVargs2)
Console.WriteLine("---")
Dim passMe(0) As Object
passMe(0) = CType(aVector2, Object)
Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}", _
IVType.InvokeMember("DotProduct", BindingFlags.InvokeMethod, _
Nothing, aVector1, passMe))
End Sub
End Class
' +++ OUTPUT +++
' ---
' (10, 10, 10) . (20, 20, 20) = 600
Şunlara uygulanır
.NET 9 ve diğer sürümler
| Ürün | Sürümler |
|---|---|
| .NET | Core 1.0, Core 1.1, Core 2.0, Core 2.1, Core 2.2, Core 3.0, Core 3.1, 5, 6, 7, 8, 9 |
| .NET Framework | 1.1, 2.0, 3.0, 3.5, 4.0, 4.5, 4.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2, 4.7, 4.7.1, 4.7.2, 4.8, 4.8.1 |
| .NET Standard | 2.0, 2.1 |
GitHub'da bizimle işbirliği yapın
Bu içeriğin kaynağı GitHub'da bulunabilir; burada ayrıca sorunları ve çekme isteklerini oluşturup gözden geçirebilirsiniz. Daha fazla bilgi için katkıda bulunan kılavuzumuzu inceleyin.
.NET geri bildirimi
.NET, açık kaynak bir projedir. Geri bildirim sağlamak için bir bağlantı seçin: