AccessibleSelection Sabit listesi
Tanım
Önemli
Bazı bilgiler ürünün ön sürümüyle ilgilidir ve sürüm öncesinde önemli değişiklikler yapılmış olabilir. Burada verilen bilgilerle ilgili olarak Microsoft açık veya zımni hiçbir garanti vermez.
Erişilebilir bir nesnenin nasıl seçildiğini veya odağı alacağını belirtir.
Bu sabit listesi, üyeleri için bit düzeyinde karşılaştırmayı destekler.
public enum class AccessibleSelection[System.Flags]
public enum AccessibleSelection[<System.Flags>]
type AccessibleSelection = Public Enum AccessibleSelection- Devralma
- Öznitelikler
Alanlar
| AddSelection | 8 | Nesneyi seçime ekler. |
| ExtendSelection | 4 | Yer işareti ile seçili nesne arasındaki tüm nesneleri seçer. |
| None | 0 | Bir nesnenin seçimi veya odağı değiştirilmez. |
| RemoveSelection | 16 | Nesneyi seçimden kaldırır. |
| TakeFocus | 1 | Odağı bir nesneye atar ve seçimin başlangıç noktası olan yer işareti yapar. , , |
| TakeSelection | 2 | Nesneyi seçer ve kapsayıcıdaki diğer tüm nesnelerin seçimini kaldırır. |
Örnekler
Aşağıdaki kod örneği, erişilebilir bilgileri kullanıma açmak için ve Control.ControlAccessibleObject sınıflarını kullanarak erişilebilirliği algılayan bir grafik denetiminin oluşturulmasını AccessibleObject gösterir. Denetim, bir göstergeyle birlikte iki eğri çizer. ChartControlAccessibleObject sınıfından ControlAccessibleObjecttüretilen sınıfı, grafik denetimi için özel erişilebilir bilgiler sağlamak için yönteminde CreateAccessibilityInstance kullanılır. Grafik göstergesi gerçek Control tabanlı bir denetim olmadığından, bunun yerine grafik denetimi tarafından çizildiğinden, herhangi bir yerleşik erişilebilir bilgi içermez. Bu nedenle sınıfı, göstergenin ChartControlAccessibleObject GetChild her parçası için erişilebilir bilgileri temsil eden öğesini döndürmek CurveLegendAccessibleObject için yöntemini geçersiz kılar. Erişilebilirliğe duyarlı bir uygulama bu denetimi kullandığında, denetim gerekli erişilebilir bilgileri sağlayabilir.
Bu örnekte, yöntemiyle sabit listesi kullanımı AccessibleSelection gösterilmektedir Select . Kod örneğinin AccessibleObject tamamı için sınıfa genel bakış bölümüne bakın.
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl::CreateAccessibilityInstance .
ref class ChartControlAccessibleObject: public ControlAccessibleObject
{
private:
ChartControl^ chartControl;
public:
ChartControlAccessibleObject( ChartControl^ ctrl )
: ControlAccessibleObject( ctrl )
{
chartControl = ctrl;
}
property System::Windows::Forms::AccessibleRole Role
{
// Gets the role for the Chart. This is used by accessibility programs.
virtual System::Windows::Forms::AccessibleRole get() override
{
return ::AccessibleRole::Chart;
}
}
property AccessibleStates State
{
// Gets the state for the Chart. This is used by accessibility programs.
virtual AccessibleStates get() override
{
return AccessibleStates::ReadOnly;
}
}
// The CurveLegend objects are "child" controls in terms of accessibility so
// return the number of ChartLengend objects.
virtual int GetChildCount() override
{
return chartControl->Legends->Length;
}
// Gets the Accessibility object of the child CurveLegend idetified by index.
virtual AccessibleObject^ GetChild( int index ) override
{
if ( index >= 0 && index < chartControl->Legends->Length )
{
return chartControl->Legends[ index ]->AccessibilityObject;
}
return nullptr;
}
internal:
// Helper function that is used by the CurveLegend's accessibility object
// to navigate between sibiling controls. Specifically, this function is used in
// the CurveLegend::CurveLegendAccessibleObject.Navigate function.
AccessibleObject^ NavigateFromChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleNavigation navdir )
{
switch ( navdir )
{
case AccessibleNavigation::Down:
case AccessibleNavigation::Next:
return GetChild( child->ID + 1 );
case AccessibleNavigation::Up:
case AccessibleNavigation::Previous:
return GetChild( child->ID - 1 );
}
return nullptr;
}
// Helper function that is used by the CurveLegend's accessibility object
// to select a specific CurveLegend control. Specifically, this function is used
// in the CurveLegend::CurveLegendAccessibleObject.Select function.
void SelectChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleSelection selection )
{
int childID = child->ID;
// Determine which selection action should occur, based on the
// AccessibleSelection value.
if ( (selection & AccessibleSelection::TakeSelection) != (AccessibleSelection)0 )
{
for ( int i = 0; i < chartControl->Legends->Length; i++ )
{
if ( i == childID )
{
chartControl->Legends[ i ]->Selected = true;
}
else
{
chartControl->Legends[ i ]->Selected = false;
}
}
// AccessibleSelection->AddSelection means that the CurveLegend will be selected.
if ( (selection & AccessibleSelection::AddSelection) != (AccessibleSelection)0 )
{
chartControl->Legends[ childID ]->Selected = true;
}
// AccessibleSelection->AddSelection means that the CurveLegend will be unselected.
if ( (selection & AccessibleSelection::RemoveSelection) != (AccessibleSelection)0 )
{
chartControl->Legends[ childID ]->Selected = false;
}
}
}
};
// class ChartControlAccessibleObject
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl.CreateAccessibilityInstance override.
public class ChartControlAccessibleObject : ControlAccessibleObject
{
ChartControl chartControl;
public ChartControlAccessibleObject(ChartControl ctrl) : base(ctrl)
{
chartControl = ctrl;
}
// Gets the role for the Chart. This is used by accessibility programs.
public override AccessibleRole Role
{
get {
return AccessibleRole.Chart;
}
}
// Gets the state for the Chart. This is used by accessibility programs.
public override AccessibleStates State
{
get {
return AccessibleStates.ReadOnly;
}
}
// The CurveLegend objects are "child" controls in terms of accessibility so
// return the number of ChartLengend objects.
public override int GetChildCount()
{
return chartControl.Legends.Length;
}
// Gets the Accessibility object of the child CurveLegend idetified by index.
public override AccessibleObject GetChild(int index)
{
if (index >= 0 && index < chartControl.Legends.Length) {
return chartControl.Legends[index].AccessibilityObject;
}
return null;
}
// Helper function that is used by the CurveLegend's accessibility object
// to navigate between sibiling controls. Specifically, this function is used in
// the CurveLegend.CurveLegendAccessibleObject.Navigate function.
internal AccessibleObject NavigateFromChild(CurveLegend.CurveLegendAccessibleObject child,
AccessibleNavigation navdir)
{
switch(navdir) {
case AccessibleNavigation.Down:
case AccessibleNavigation.Next:
return GetChild(child.ID + 1);
case AccessibleNavigation.Up:
case AccessibleNavigation.Previous:
return GetChild(child.ID - 1);
}
return null;
}
// Helper function that is used by the CurveLegend's accessibility object
// to select a specific CurveLegend control. Specifically, this function is used
// in the CurveLegend.CurveLegendAccessibleObject.Select function.
internal void SelectChild(CurveLegend.CurveLegendAccessibleObject child, AccessibleSelection selection)
{
int childID = child.ID;
// Determine which selection action should occur, based on the
// AccessibleSelection value.
if ((selection & AccessibleSelection.TakeSelection) != 0) {
for(int i = 0; i < chartControl.Legends.Length; i++) {
if (i == childID) {
chartControl.Legends[i].Selected = true;
} else {
chartControl.Legends[i].Selected = false;
}
}
// AccessibleSelection.AddSelection means that the CurveLegend will be selected.
if ((selection & AccessibleSelection.AddSelection) != 0) {
chartControl.Legends[childID].Selected = true;
}
// AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
if ((selection & AccessibleSelection.RemoveSelection) != 0) {
chartControl.Legends[childID].Selected = false;
}
}
}
}
' Inner Class ChartControlAccessibleObject represents accessible information
' associated with the ChartControl.
' The ChartControlAccessibleObject is returned in the ' ChartControl.CreateAccessibilityInstance override.
Public Class ChartControlAccessibleObject
Inherits Control.ControlAccessibleObject
Private chartControl As ChartControl
Public Sub New(ctrl As ChartControl)
MyBase.New(ctrl)
chartControl = ctrl
End Sub
' Get the role for the Chart. This is used by accessibility programs.
Public Overrides ReadOnly Property Role() As AccessibleRole
Get
Return System.Windows.Forms.AccessibleRole.Chart
End Get
End Property
' Get the state for the Chart. This is used by accessibility programs.
Public Overrides ReadOnly Property State() As AccessibleStates
Get
Return AccessibleStates.ReadOnly
End Get
End Property
' The CurveLegend objects are "child" controls in terms of accessibility so
' return the number of ChartLengend objects.
Public Overrides Function GetChildCount() As Integer
Return chartControl.Legends.Length
End Function
' Get the Accessibility object of the child CurveLegend idetified by index.
Public Overrides Function GetChild(index As Integer) As AccessibleObject
If index >= 0 And index < chartControl.Legends.Length Then
Return chartControl.Legends(index).AccessibilityObject
End If
Return Nothing
End Function
' Helper function that is used by the CurveLegend's accessibility object
' to navigate between sibiling controls. Specifically, this function is used in
' the CurveLegend.CurveLegendAccessibleObject.Navigate function.
Friend Function NavigateFromChild(child As CurveLegend.CurveLegendAccessibleObject, _
navdir As AccessibleNavigation) As AccessibleObject
Select Case navdir
Case AccessibleNavigation.Down, AccessibleNavigation.Next
Return GetChild(child.ID + 1)
Case AccessibleNavigation.Up, AccessibleNavigation.Previous
Return GetChild(child.ID - 1)
End Select
Return Nothing
End Function
' Helper function that is used by the CurveLegend's accessibility object
' to select a specific CurveLegend control. Specifically, this function is used
' in the CurveLegend.CurveLegendAccessibleObject.Select function.
Friend Sub SelectChild(child As CurveLegend.CurveLegendAccessibleObject, selection As AccessibleSelection)
Dim childID As Integer = child.ID
' Determine which selection action should occur, based on the
' AccessibleSelection value.
If (selection And AccessibleSelection.TakeSelection) <> 0 Then
Dim i As Integer
For i = 0 To chartControl.Legends.Length - 1
If i = childID Then
chartControl.Legends(i).Selected = True
Else
chartControl.Legends(i).Selected = False
End If
Next i
' AccessibleSelection.AddSelection means that the CurveLegend will be selected.
If (selection And AccessibleSelection.AddSelection) <> 0 Then
chartControl.Legends(childID).Selected = True
End If
' AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
If (selection And AccessibleSelection.RemoveSelection) <> 0 Then
chartControl.Legends(childID).Selected = False
End If
End If
End Sub
End Class
Açıklamalar
Odaklanmış nesne, klavye girişi alan tek nesnedir. Klavye odağı olan nesne etkin pencere veya etkin pencerenin alt nesnesidir. Seçili bir nesne, bir grup işlemi türüne katılmak için işaretlenir.
Bu numaralandırma tarafından AccessibleObject.Selectkullanılır.
Erişilebilirlik uygulaması hakkında ek bilgi için Microsoft Geliştirici Ağı (MSDN) kitaplığında "Microsoft Etkin Erişilebilirlik" araması yapın.