Verileri işleme
Birden Çok Etkin Sonuç Kümesi (MARS) kullanılmadan önce, geliştiricilerin belirli senaryoları çözmek için birden çok bağlantı veya sunucu tarafı imleç kullanması gerekiyordu. Ayrıca, işlem durumunda birden çok bağlantı kullanıldığında, bağlı bağlantılar (sp_getbindtoken ve sp_bindsession ile) gerekliydi. Aşağıdaki senaryolarda birden çok bağlantı yerine MARS özellikli bir bağlantının nasıl kullanılacağı gösterilmektedir.
MARS ile Birden Çok Komut Kullanma
Aşağıdaki Konsol uygulaması, iki nesneyle iki SqlDataReader nesnenin SqlCommand ve MARS'ın etkinleştirildiği tek SqlConnection bir nesnenin nasıl kullanılacağını gösterir.
Örnek
Örnek, AdventureWorks veritabanına tek bir bağlantı açar. Bir SqlCommand nesne kullanılarak bir SqlDataReader oluşturulur. Okuyucu kullanıldıkçe, ikinci SqlDataReader okuyucunun WHERE yan tümcesine giriş olarak ilkinden SqlDataReader veriler kullanılarak bir saniye açılır.
Not
Aşağıdaki örnekte SQL Server ile birlikte verilen örnek AdventureWorks veritabanı kullanılmaktadır. Örnek kodda sağlanan bağlantı dizesi veritabanının yüklü ve yerel bilgisayarda kullanılabilir olduğunu varsayar. ortamınız için gerekli bağlantı dizesi değiştirin.
Option Strict On
Option Explicit On
Imports System
Imports System.Data
Imports System.Data.SqlClient
Module Module1
Sub Main()
' By default, MARS is disabled when connecting
' to a MARS-enabled host.
' It must be enabled in the connection string.
Dim connectionString As String = GetConnectionString()
Dim vendorID As Integer
Dim vendorCmd As SqlCommand
Dim productCmd As SqlCommand
Dim productReader As SqlDataReader
Dim vendorSQL As String = & _
"SELECT VendorId, Name FROM Purchasing.Vendor"
Dim productSQL As String = _
"SELECT Production.Product.Name FROM Production.Product " & _
"INNER JOIN Purchasing.ProductVendor " & _
"ON Production.Product.ProductID = " & _
"Purchasing.ProductVendor.ProductID " & _
"WHERE Purchasing.ProductVendor.VendorID = @VendorId"
Using awConnection As New SqlConnection(connectionString)
vendorCmd = New SqlCommand(vendorSQL, awConnection)
productCmd = New SqlCommand(productSQL, awConnection)
productCmd.Parameters.Add("@VendorId", SqlDbType.Int)
awConnection.Open()
Using vendorReader As SqlDataReader = vendorCmd.ExecuteReader()
While vendorReader.Read()
Console.WriteLine(vendorReader("Name"))
vendorID = CInt(vendorReader("VendorId"))
productCmd.Parameters("@VendorId").Value = vendorID
' The following line of code requires
' a MARS-enabled connection.
productReader = productCmd.ExecuteReader()
Using productReader
While productReader.Read()
Console.WriteLine(" " & CStr(productReader("Name")))
End While
End Using
End While
End Using
End Using
Console.WriteLine("Press any key to continue")
Console.ReadLine()
End Sub
Function GetConnectionString() As String
' To avoid storing the connection string in your code,
' you can retrieve it from a configuration file.
Return "..." & _
"MultipleActiveResultSets=True"
End Function
End Module
using System;
using System.Data;
using System.Data.SqlClient;
class Class1
{
static void Main()
{
// By default, MARS is disabled when connecting
// to a MARS-enabled host.
// It must be enabled in the connection string.
string connectionString = GetConnectionString();
int vendorID;
SqlDataReader productReader = null;
string vendorSQL =
"SELECT VendorId, Name FROM Purchasing.Vendor";
string productSQL =
"SELECT Production.Product.Name FROM Production.Product " +
"INNER JOIN Purchasing.ProductVendor " +
"ON Production.Product.ProductID = " +
"Purchasing.ProductVendor.ProductID " +
"WHERE Purchasing.ProductVendor.VendorID = @VendorId";
using (SqlConnection awConnection =
new SqlConnection(connectionString))
{
SqlCommand vendorCmd = new SqlCommand(vendorSQL, awConnection);
SqlCommand productCmd =
new SqlCommand(productSQL, awConnection);
productCmd.Parameters.Add("@VendorId", SqlDbType.Int);
awConnection.Open();
using (SqlDataReader vendorReader = vendorCmd.ExecuteReader())
{
while (vendorReader.Read())
{
Console.WriteLine(vendorReader["Name"]);
vendorID = (int)vendorReader["VendorId"];
productCmd.Parameters["@VendorId"].Value = vendorID;
// The following line of code requires
// a MARS-enabled connection.
productReader = productCmd.ExecuteReader();
using (productReader)
{
while (productReader.Read())
{
Console.WriteLine(" " +
productReader["Name"].ToString());
}
}
}
}
Console.WriteLine("Press any key to continue");
Console.ReadLine();
}
}
private static string GetConnectionString()
{
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
return "..." +
"MultipleActiveResultSets=True";
}
}
MARS ile Verileri Okuma ve Güncelleştirme
MARS, birden fazla bekleyen işlemle hem okuma işlemleri hem de veri işleme dili (DML) işlemleri için bir bağlantının kullanılmasına olanak tanır. Bu özellik, bir uygulamanın bağlantı meşgul hatalarıyla başa çıkma gereksinimini ortadan kaldırır. Buna ek olarak, MARS genellikle daha fazla kaynak tüketen sunucu tarafı imleçlerin kullanımını değiştirebilir. Son olarak, birden çok işlem tek bir bağlantı üzerinde çalışabildiğinden aynı işlem bağlamını paylaşabilir ve bu da sp_getbindtoken ve sp_bindsession sistem saklı yordamlarını kullanma gereksinimini ortadan kaldırır.
Örnek
Aşağıdaki Konsol uygulaması, üç SqlCommand nesneyle iki SqlDataReader nesnenin ve MARS'ın etkinleştirildiği tek SqlConnection bir nesnenin nasıl kullanılacağını gösterir. İlk komut nesnesi, kredi derecelendirmesi 5 olan satıcıların listesini alır. İkinci komut nesnesi, ikincisini belirli bir satıcının tüm ürünleriyle yüklemek SqlDataReader için öğesinden SqlDataReader sağlanan satıcı kimliğini kullanır. Her ürün kaydı ikinci SqlDataReadertarafından ziyaret edilir. Yeni OnOrderQty'nin ne olması gerektiğini belirlemek için bir hesaplama gerçekleştirilir. Üçüncü komut nesnesi daha sonra ProductVendor tablosunu yeni değerle güncelleştirmek için kullanılır. Bu işlemin tamamı, sonunda geri alınan tek bir işlem içinde gerçekleşir.
Not
Aşağıdaki örnekte SQL Server ile birlikte verilen örnek AdventureWorks veritabanı kullanılmaktadır. Örnek kodda sağlanan bağlantı dizesi veritabanının yüklü ve yerel bilgisayarda kullanılabilir olduğunu varsayar. ortamınız için gerekli bağlantı dizesi değiştirin.
Option Strict On
Option Explicit On
Imports System
Imports System.Data
Imports System.Data.SqlClient
Module Module1
Sub Main()
' By default, MARS is disabled when connecting
' to a MARS-enabled host.
' It must be enabled in the connection string.
Dim connectionString As String = GetConnectionString()
Dim updateTx As SqlTransaction
Dim vendorCmd As SqlCommand
Dim prodVendCmd As SqlCommand
Dim updateCmd As SqlCommand
Dim prodVendReader As SqlDataReader
Dim vendorID As Integer
Dim productID As Integer
Dim minOrderQty As Integer
Dim maxOrderQty As Integer
Dim onOrderQty As Integer
Dim recordsUpdated As Integer
Dim totalRecordsUpdated As Integer
Dim vendorSQL As String = _
"SELECT VendorID, Name FROM Purchasing.Vendor " & _
"WHERE CreditRating = 5"
Dim prodVendSQL As String = _
"SELECT ProductID, MaxOrderQty, MinOrderQty, OnOrderQty " & _
"FROM Purchasing.ProductVendor " & _
"WHERE VendorID = @VendorID"
Dim updateSQL As String = _
"UPDATE Purchasing.ProductVendor " & _
"SET OnOrderQty = @OrderQty " & _
"WHERE ProductID = @ProductID AND VendorID = @VendorID"
Using awConnection As New SqlConnection(connectionString)
awConnection.Open()
updateTx = awConnection.BeginTransaction()
vendorCmd = New SqlCommand(vendorSQL, awConnection)
vendorCmd.Transaction = updateTx
prodVendCmd = New SqlCommand(prodVendSQL, awConnection)
prodVendCmd.Transaction = updateTx
prodVendCmd.Parameters.Add("@VendorId", SqlDbType.Int)
updateCmd = New SqlCommand(updateSQL, awConnection)
updateCmd.Transaction = updateTx
updateCmd.Parameters.Add("@OrderQty", SqlDbType.Int)
updateCmd.Parameters.Add("@ProductID", SqlDbType.Int)
updateCmd.Parameters.Add("@VendorID", SqlDbType.Int)
Using vendorReader As SqlDataReader = vendorCmd.ExecuteReader()
While vendorReader.Read()
Console.WriteLine(vendorReader("Name"))
vendorID = CInt(vendorReader("VendorID"))
prodVendCmd.Parameters("@VendorID").Value = vendorID
prodVendReader = prodVendCmd.ExecuteReader()
Using prodVendReader
While (prodVendReader.Read)
productID = CInt(prodVendReader("ProductID"))
If IsDBNull(prodVendReader("OnOrderQty")) Then
minOrderQty = CInt(prodVendReader("MinOrderQty"))
onOrderQty = minOrderQty
Else
maxOrderQty = CInt(prodVendReader("MaxOrderQty"))
onOrderQty = CInt(maxOrderQty / 2)
End If
updateCmd.Parameters("@OrderQty").Value = onOrderQty
updateCmd.Parameters("@ProductID").Value = productID
updateCmd.Parameters("@VendorID").Value = vendorID
recordsUpdated = updateCmd.ExecuteNonQuery()
totalRecordsUpdated += recordsUpdated
End While
End Using
End While
End Using
Console.WriteLine("Total Records Updated: " & _
CStr(totalRecordsUpdated))
updateTx.Rollback()
Console.WriteLine("Transaction Rolled Back")
End Using
Console.WriteLine("Press any key to continue")
Console.ReadLine()
End Sub
Function GetConnectionString() As String
' To avoid storing the connection string in your code,
' you can retrieve it from a configuration file.
Return "..." & _
"MultipleActiveResultSets=True"
End Function
End Module
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;
using System.Data.SqlClient;
class Program
{
static void Main()
{
// By default, MARS is disabled when connecting
// to a MARS-enabled host.
// It must be enabled in the connection string.
string connectionString = GetConnectionString();
SqlTransaction updateTx = null;
SqlCommand vendorCmd = null;
SqlCommand prodVendCmd = null;
SqlCommand updateCmd = null;
SqlDataReader prodVendReader = null;
int vendorID = 0;
int productID = 0;
int minOrderQty = 0;
int maxOrderQty = 0;
int onOrderQty = 0;
int recordsUpdated = 0;
int totalRecordsUpdated = 0;
string vendorSQL =
"SELECT VendorID, Name FROM Purchasing.Vendor " +
"WHERE CreditRating = 5";
string prodVendSQL =
"SELECT ProductID, MaxOrderQty, MinOrderQty, OnOrderQty " +
"FROM Purchasing.ProductVendor " +
"WHERE VendorID = @VendorID";
string updateSQL =
"UPDATE Purchasing.ProductVendor " +
"SET OnOrderQty = @OrderQty " +
"WHERE ProductID = @ProductID AND VendorID = @VendorID";
using (SqlConnection awConnection =
new SqlConnection(connectionString))
{
awConnection.Open();
updateTx = awConnection.BeginTransaction();
vendorCmd = new SqlCommand(vendorSQL, awConnection);
vendorCmd.Transaction = updateTx;
prodVendCmd = new SqlCommand(prodVendSQL, awConnection);
prodVendCmd.Transaction = updateTx;
prodVendCmd.Parameters.Add("@VendorId", SqlDbType.Int);
updateCmd = new SqlCommand(updateSQL, awConnection);
updateCmd.Transaction = updateTx;
updateCmd.Parameters.Add("@OrderQty", SqlDbType.Int);
updateCmd.Parameters.Add("@ProductID", SqlDbType.Int);
updateCmd.Parameters.Add("@VendorID", SqlDbType.Int);
using (SqlDataReader vendorReader = vendorCmd.ExecuteReader())
{
while (vendorReader.Read())
{
Console.WriteLine(vendorReader["Name"]);
vendorID = (int) vendorReader["VendorID"];
prodVendCmd.Parameters["@VendorID"].Value = vendorID;
prodVendReader = prodVendCmd.ExecuteReader();
using (prodVendReader)
{
while (prodVendReader.Read())
{
productID = (int) prodVendReader["ProductID"];
if (prodVendReader["OnOrderQty"] == DBNull.Value)
{
minOrderQty = (int) prodVendReader["MinOrderQty"];
onOrderQty = minOrderQty;
}
else
{
maxOrderQty = (int) prodVendReader["MaxOrderQty"];
onOrderQty = (int)(maxOrderQty / 2);
}
updateCmd.Parameters["@OrderQty"].Value = onOrderQty;
updateCmd.Parameters["@ProductID"].Value = productID;
updateCmd.Parameters["@VendorID"].Value = vendorID;
recordsUpdated = updateCmd.ExecuteNonQuery();
totalRecordsUpdated += recordsUpdated;
}
}
}
}
Console.WriteLine("Total Records Updated: " +
totalRecordsUpdated.ToString());
updateTx.Rollback();
Console.WriteLine("Transaction Rolled Back");
}
Console.WriteLine("Press any key to continue");
Console.ReadLine();
}
private static string GetConnectionString()
{
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
return "..." +
"MultipleActiveResultSets=True";
}
}