Convert.ToByte 方法

定义

将指定的值转换为 8 位无符号整数。

重载

ToByte(String)

将数字的指定字符串表示形式转换为等效的 8 位无符号整数。

ToByte(UInt16)

将指定的 16 位无符号整数的值转换为等效的 8 位无符号整数。

ToByte(UInt32)

将指定的 32 位无符号整数的值转换为等效的 8 位无符号整数。

ToByte(String, Int32)

将指定基数的数字的字符串表示形式转换为等效的 8 位无符号整数。

ToByte(Object, IFormatProvider)

使用指定的区域性特定格式设置信息,将指定对象的值转换为 8 位无符号整数。

ToByte(String, IFormatProvider)

使用指定的区域性特定格式设置信息,将数字的指定字符串表示形式转换为等效的 8 位无符号整数。

ToByte(Single)

将指定的单精度浮点数的值转换为等效的 8 位无符号整数。

ToByte(UInt64)

将指定的 64 位无符号整数的值转换为等效的 8 位无符号整数。

ToByte(SByte)

将指定的 8 位有符号整数的值转换为等效的 8 位无符号整数。

ToByte(DateTime)

调用此方法始终引发 InvalidCastException

ToByte(Int64)

将指定的 64 位有符号整数的值转换为等效的 8 位无符号整数。

ToByte(Byte)

返回指定的 8 位无符号整数;不执行任何实际的转换。

ToByte(Char)

将指定 Unicode 字符的值转换为等效的 8 位无符号整数。

ToByte(Decimal)

将指定的十进制数的值转换为等效的 8 位无符号整数。

ToByte(Boolean)

将指定的布尔值转换为等效的 8 位无符号整数。

ToByte(Int16)

将指定的 16 位有符号整数的值转换为等效的 8 位无符号整数。

ToByte(Int32)

将指定的 32 位有符号整数的值转换为等效的 8 位无符号整数。

ToByte(Double)

将指定的双精度浮点数的值转换为等效的 8 位无符号整数。

ToByte(Object)

将指定对象的值转换为 8 位无符号整数。

ToByte(String)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将数字的指定字符串表示形式转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::String ^ value);
public static byte ToByte (string value);
public static byte ToByte (string? value);
static member ToByte : string -> byte
Public Shared Function ToByte (value As String) As Byte

参数

value
String

包含要转换的数字的字符串。

返回

一个与 value 等效的 8 位无符号整数,如果 valuenull,则为零。

例外

value 不由一个可选符号后跟一系列数字 (0-9) 组成。

value 表示小于 Byte.MinValue 或大于 Byte.MaxValue 的数字。

示例

以下示例定义一个字符串数组,并尝试将每个字符串转换为 Byte。 请注意,当字符串分析为零时 nullString.EmptyFormatException引发 。 另请注意,在成功分析前导空格和尾随空格时,格式符号(如货币符号、组分隔符或小数点分隔符)不会这样做。

using System;

public class Example
{
   public static void Main()
   {
      String[] values = { null, "", "0xC9", "C9", "101", "16.3",
                          "$12", "$12.01", "-4", "1,032", "255",
                          "   16  " };
      foreach (var value in values) {
         try {
            byte number = Convert.ToByte(value);
            Console.WriteLine("'{0}' --> {1}",
                              value == null ? "<null>" : value, number);
         }
         catch (FormatException) {
            Console.WriteLine("Bad Format: '{0}'",
                              value == null ? "<null>" : value);
         }
         catch (OverflowException) {
            Console.WriteLine("OverflowException: '{0}'", value);
         }
      }
   }
}
// The example displays the following output:
//     '<null>' --> 0
//     Bad Format: ''
//     Bad Format: '0xC9'
//     Bad Format: 'C9'
//     '101' --> 101
//     Bad Format: '16.3'
//     Bad Format: '$12'
//     Bad Format: '$12.01'
//     OverflowException: '-4'
//     Bad Format: '1,032'
//     '255' --> 255
//     '   16  ' --> 16
open System

let values = 
    [| null; ""; "0xC9"; "C9"; "101"; "16.3"; "$12"
       "$12.01"; "-4"; "1,032"; "255"; "   16  " |]

for value in values do
    try
        let number = Convert.ToByte(value)
        printfn $"""'%A{value}' --> {number}"""
    with
    | :? FormatException ->
        printfn $"Bad Format: '%A{value}'"
    | :? OverflowException ->
        printfn $"OverflowException: '{value}'"
        
// The example displays the following output:
//     '<null>' --> 0
//     Bad Format: ''
//     Bad Format: '0xC9'
//     Bad Format: 'C9'
//     '101' --> 101
//     Bad Format: '16.3'
//     Bad Format: '$12'
//     Bad Format: '$12.01'
//     OverflowException: '-4'
//     Bad Format: '1,032'
//     '255' --> 255
//     '   16  ' --> 16
Module Example
   Public Sub Main()
      Dim values() As String = { Nothing, "", "0xC9", "C9", "101", 
                                 "16.3", "$12", "$12.01", "-4", 
                                 "1,032", "255", "   16  " }
      For Each value In values
         Try 
            Dim number As Byte = Convert.ToByte(value)
            Console.WriteLine("'{0}' --> {1}", 
                              If(value Is Nothing, "<null>", value), number)
         Catch e As FormatException
            Console.WriteLine("Bad Format: '{0}'", 
                              If(value Is Nothing, "<null>", value))
         Catch e As OverflowException
            Console.WriteLine("OverflowException: '{0}'", value)
         End Try
      Next
   End Sub
End Module
' The example displays the following output:
'     '<null>' --> 0
'     Bad Format: ''
'     Bad Format: '0xC9'
'     Bad Format: 'C9'
'     '101' --> 101
'     Bad Format: '16.3'
'     Bad Format: '$12'
'     Bad Format: '$12.01'
'     OverflowException: '-4'
'     Bad Format: '1,032'
'     '255' --> 255
'     '   16  ' --> 16

注解

ToByte(String)使用 方法等效于将 Byte.Parse(String) 传递给 value 方法。 value 通过使用当前区域性的格式设置约定进行解释。

如果不想在转换失败时处理异常,可以改为调用 Byte.TryParse 方法。 它返回一个 Boolean 值,该值指示转换是成功还是失败。

另请参阅

适用于

ToByte(UInt16)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

重要

此 API 不符合 CLS。

将指定的 16 位无符号整数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::UInt16 value);
[System.CLSCompliant(false)]
public static byte ToByte (ushort value);
[<System.CLSCompliant(false)>]
static member ToByte : uint16 -> byte
Public Shared Function ToByte (value As UShort) As Byte

参数

value
UInt16

要转换的 16 位无符号整数。

返回

一个与 value 等效的 8 位无符号整数。

属性

例外

示例

以下示例将无符号 16 位整数数组转换为 Byte 值。

ushort[] numbers = { UInt16.MinValue, 121, 340, UInt16.MaxValue };
byte result;
foreach (ushort number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       Converted the UInt16 value 0 to the Byte value 0.
//       Converted the UInt16 value 121 to the Byte value 121.
//       The UInt16 value 340 is outside the range of the Byte type.
//       The UInt16 value 65535 is outside the range of the Byte type.
let numbers = [| UInt16.MinValue; 121us; 340us; UInt16.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       Converted the UInt16 value 0 to the Byte value 0.
//       Converted the UInt16 value 121 to the Byte value 121.
//       The UInt16 value 340 is outside the range of the Byte type.
//       The UInt16 value 65535 is outside the range of the Byte type.
Dim numbers() As UShort = { UInt16.MinValue, 121, 340, UInt16.MaxValue }
Dim result As Byte
For Each number As UShort In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       Converted the UInt16 value 0 to the Byte value 0.
'       Converted the UInt16 value 121 to the Byte value 121.
'       The UInt16 value 340 is outside the range of the Byte type.
'       The UInt16 value 65535 is outside the range of the Byte type.

适用于

ToByte(UInt32)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

重要

此 API 不符合 CLS。

将指定的 32 位无符号整数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::UInt32 value);
[System.CLSCompliant(false)]
public static byte ToByte (uint value);
[<System.CLSCompliant(false)>]
static member ToByte : uint32 -> byte
Public Shared Function ToByte (value As UInteger) As Byte

参数

value
UInt32

要转换的 32 位无符号整数。

返回

一个与 value 等效的 8 位无符号整数。

属性

例外

示例

以下示例将无符号整数数组转换为 Byte 值。

uint[] numbers = { UInt32.MinValue, 121, 340, UInt32.MaxValue };
byte result;
foreach (uint number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       Converted the UInt32 value 0 to the Byte value 0.
//       Converted the UInt32 value 121 to the Byte value 121.
//       The UInt32 value 340 is outside the range of the Byte type.
//       The UInt32 value 4294967295 is outside the range of the Byte type.
let numbers = [| UInt32.MinValue; 121u; 340u; UInt32.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       Converted the UInt32 value 0 to the Byte value 0.
//       Converted the UInt32 value 121 to the Byte value 121.
//       The UInt32 value 340 is outside the range of the Byte type.
//       The UInt32 value 4294967295 is outside the range of the Byte type.
Dim numbers() As UInteger = { UInt32.MinValue, 121, 340, UInt32.MaxValue }
Dim result As Byte
For Each number As UInteger In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       Converted the UInt32 value 0 to the Byte value 0.
'       Converted the UInt32 value 121 to the Byte value 121.
'       The UInt32 value 340 is outside the range of the Byte type.
'       The UInt32 value 4294967295 is outside the range of the Byte type.

适用于

ToByte(String, Int32)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定基数的数字的字符串表示形式转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::String ^ value, int fromBase);
public static byte ToByte (string value, int fromBase);
public static byte ToByte (string? value, int fromBase);
static member ToByte : string * int -> byte
Public Shared Function ToByte (value As String, fromBase As Integer) As Byte

参数

value
String

包含要转换的数字的字符串。

fromBase
Int32

value 中数字的基数,它必须是 2、8、10 或 16。

返回

value 中数字等效的 8 位无符号整数,如果 valuenull,则为 0(零)。

例外

fromBase 不是 2、8、10 或 16。

value(表示非 10 为基数的无符号数字)的前面带一个负号。

value 包含一个字符,该字符不是由 fromBase 指定的基数中的有效数字。 如果 value 中的第一个字符无效,则该异常消息指示没有要转换的数字;否则,该消息指示 value 包含无效的尾随字符。

value(表示 10 为基的无符号数字)的前面带一个负号。

value 表示小于 Byte.MinValue 或大于 Byte.MaxValue 的数字。

示例

以下示例交替尝试将字符串数组解释为二进制值、八进制值、十进制值和十六进制值的表示形式。

using System;

public class Example
{
   public static void Main()
   {
      int[] bases = { 2, 8, 10, 16 };
      string[] values = { "-1", "1", "08", "0F", "11" , "12", "30",
                          "101", "255", "FF", "10000000", "80" };
      byte number;
      foreach (int numBase in bases)
      {
         Console.WriteLine("Base {0}:", numBase);
         foreach (string value in values)
         {
            try {
               number = Convert.ToByte(value, numBase);
               Console.WriteLine("   Converted '{0}' to {1}.", value, number);
            }
            catch (FormatException) {
               Console.WriteLine("   '{0}' is not in the correct format for a base {1} byte value.",
                                 value, numBase);
            }
            catch (OverflowException) {
               Console.WriteLine("   '{0}' is outside the range of the Byte type.", value);
            }
            catch (ArgumentException) {
               Console.WriteLine("   '{0}' is invalid in base {1}.", value, numBase);
            }
         }
      }
   }
}
// The example displays the following output:
//    Base 2:
//       '-1' is invalid in base 2.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 2 conversion.
//       '0F' is not in the correct format for a base 2 conversion.
//       Converted '11' to 3.
//       '12' is not in the correct format for a base 2 conversion.
//       '30' is not in the correct format for a base 2 conversion.
//       Converted '101' to 5.
//       '255' is not in the correct format for a base 2 conversion.
//       'FF' is not in the correct format for a base 2 conversion.
//       Converted '10000000' to 128.
//       '80' is not in the correct format for a base 2 conversion.
//    Base 8:
//       '-1' is invalid in base 8.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 8 conversion.
//       '0F' is not in the correct format for a base 8 conversion.
//       Converted '11' to 9.
//       Converted '12' to 10.
//       Converted '30' to 24.
//       Converted '101' to 65.
//       Converted '255' to 173.
//       'FF' is not in the correct format for a base 8 conversion.
//       '10000000' is outside the range of the Byte type.
//       '80' is not in the correct format for a base 8 conversion.
//    Base 10:
//       '-1' is outside the range of the Byte type.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       '0F' is not in the correct format for a base 10 conversion.
//       Converted '11' to 11.
//       Converted '12' to 12.
//       Converted '30' to 30.
//       Converted '101' to 101.
//       Converted '255' to 255.
//       'FF' is not in the correct format for a base 10 conversion.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 80.
//    Base 16:
//       '-1' is invalid in base 16.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       Converted '0F' to 15.
//       Converted '11' to 17.
//       Converted '12' to 18.
//       Converted '30' to 48.
//       '101' is outside the range of the Byte type.
//       '255' is outside the range of the Byte type.
//       Converted 'FF' to 255.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 128.
open System

let bases = [ 2; 8; 10; 16 ]
let values = 
    [| "-1"; "1"; "08"; "0F"; "11"; "12"; "30"
       "101"; "255"; "FF"; "10000000"; "80" |]

for numBase in bases do
    printfn $"Base {numBase}:"
    for value in values do
        try
            let number = Convert.ToByte(value, numBase)
            printfn $"   Converted '{value}' to {number}."
        with
        | :? FormatException ->
            printfn $"   '{value}' is not in the correct format for a base {numBase} byte value."
        | :? OverflowException ->
            printfn $"   '{value}' is outside the range of the Byte type."
        | :? ArgumentException ->
            printfn $"   '{value}' is invalid in base {numBase}."

// The example displays the following output:
//    Base 2:
//       '-1' is invalid in base 2.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 2 conversion.
//       '0F' is not in the correct format for a base 2 conversion.
//       Converted '11' to 3.
//       '12' is not in the correct format for a base 2 conversion.
//       '30' is not in the correct format for a base 2 conversion.
//       Converted '101' to 5.
//       '255' is not in the correct format for a base 2 conversion.
//       'FF' is not in the correct format for a base 2 conversion.
//       Converted '10000000' to 128.
//       '80' is not in the correct format for a base 2 conversion.
//    Base 8:
//       '-1' is invalid in base 8.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 8 conversion.
//       '0F' is not in the correct format for a base 8 conversion.
//       Converted '11' to 9.
//       Converted '12' to 10.
//       Converted '30' to 24.
//       Converted '101' to 65.
//       Converted '255' to 173.
//       'FF' is not in the correct format for a base 8 conversion.
//       '10000000' is outside the range of the Byte type.
//       '80' is not in the correct format for a base 8 conversion.
//    Base 10:
//       '-1' is outside the range of the Byte type.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       '0F' is not in the correct format for a base 10 conversion.
//       Converted '11' to 11.
//       Converted '12' to 12.
//       Converted '30' to 30.
//       Converted '101' to 101.
//       Converted '255' to 255.
//       'FF' is not in the correct format for a base 10 conversion.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 80.
//    Base 16:
//       '-1' is invalid in base 16.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       Converted '0F' to 15.
//       Converted '11' to 17.
//       Converted '12' to 18.
//       Converted '30' to 48.
//       '101' is outside the range of the Byte type.
//       '255' is outside the range of the Byte type.
//       Converted 'FF' to 255.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 128.
Module Example
   Public Sub Main()
      Dim bases() As Integer = { 2, 8, 10, 16 }
      Dim values() As String = { "-1", "1", "08", "0F", "11" , "12", "30", _                
                                  "101", "255", "FF", "10000000", "80" }
      Dim number As Byte
      For Each base As Integer In bases
         Console.WriteLine("Base {0}:", base)
         For Each value As String In values
            Try
               number = Convert.ToByte(value, base)
               Console.WriteLine("   Converted '{0}' to {1}.", value, number)
            Catch e As FormatException
               Console.WriteLine("   '{0}' is not in the correct format for a base {1} conversion.", _
                                 value, base)
            Catch e As OverflowException
               Console.WriteLine("   '{0}' is outside the range of the Byte type.", value)
            Catch e As ArgumentException
               Console.WriteLine("   '{0}' is invalid in base {1}.", value, base)
            End Try   
         Next                                 
      Next 
   End Sub
End Module
' The example displays the following output:
'    Base 2:
'       '-1' is invalid in base 2.
'       Converted '1' to 1.
'       '08' is not in the correct format for a base 2 conversion.
'       '0F' is not in the correct format for a base 2 conversion.
'       Converted '11' to 3.
'       '12' is not in the correct format for a base 2 conversion.
'       '30' is not in the correct format for a base 2 conversion.
'       Converted '101' to 5.
'       '255' is not in the correct format for a base 2 conversion.
'       'FF' is not in the correct format for a base 2 conversion.
'       Converted '10000000' to 128.
'       '80' is not in the correct format for a base 2 conversion.
'    Base 8:
'       '-1' is invalid in base 8.
'       Converted '1' to 1.
'       '08' is not in the correct format for a base 8 conversion.
'       '0F' is not in the correct format for a base 8 conversion.
'       Converted '11' to 9.
'       Converted '12' to 10.
'       Converted '30' to 24.
'       Converted '101' to 65.
'       Converted '255' to 173.
'       'FF' is not in the correct format for a base 8 conversion.
'       '10000000' is outside the range of the Byte type.
'       '80' is not in the correct format for a base 8 conversion.
'    Base 10:
'       '-1' is outside the range of the Byte type.
'       Converted '1' to 1.
'       Converted '08' to 8.
'       '0F' is not in the correct format for a base 10 conversion.
'       Converted '11' to 11.
'       Converted '12' to 12.
'       Converted '30' to 30.
'       Converted '101' to 101.
'       Converted '255' to 255.
'       'FF' is not in the correct format for a base 10 conversion.
'       '10000000' is outside the range of the Byte type.
'       Converted '80' to 80.
'    Base 16:
'       '-1' is invalid in base 16.
'       Converted '1' to 1.
'       Converted '08' to 8.
'       Converted '0F' to 15.
'       Converted '11' to 17.
'       Converted '12' to 18.
'       Converted '30' to 48.
'       '101' is outside the range of the Byte type.
'       '255' is outside the range of the Byte type.
'       Converted 'FF' to 255.
'       '10000000' is outside the range of the Byte type.
'       Converted '80' to 128.

注解

如果 fromBase 为 16,则可以在参数指定的 value 数字前面添加“0x”或“0X”。

Byte由于数据类型仅支持无符号值,因此 该方法ToByte(String, Int32)假定value使用无符号二进制表示形式表示。 换句话说,所有 8 位都用于表示数值,而符号位不存在。 因此,可以编写代码,在代码中,将数据类型范围 Byte 外有符号的字节值转换为 Byte 值,而不会引发方法异常。 以下示例将 转换为 MinValue 其十六进制字符串表示形式,然后调用 ToByte(String, Int32) 方法。 方法显示消息“0x80转换为 128”,而不是引发异常。

// Create a hexadecimal value out of range of the Byte type.
string value = SByte.MinValue.ToString("X");
// Convert it back to a number.
try
{
   byte number = Convert.ToByte(value, 16);
   Console.WriteLine("0x{0} converts to {1}.", value, number);
}
catch (OverflowException)
{
   Console.WriteLine("Unable to convert '0x{0}' to a byte.", value);
}
// Create a hexadecimal value out of range of the Byte type.
let value = SByte.MinValue.ToString "X"
// Convert it back to a number.
try
    let number = Convert.ToByte(value, 16)
    printfn $"0x{value} converts to {number}."
with :? OverflowException ->
    printfn $"Unable to convert '0x{value}' to a byte."
' Create a hexadecimal value out of range of the Byte type.
Dim value As String = SByte.MinValue.ToString("X")
' Convert it back to a number.
Try
   Dim number As Byte = Convert.ToByte(value, 16)
   Console.WriteLine("0x{0} converts to {1}.", value, number)
Catch e As OverflowException
   Console.WriteLine("Unable to convert '0x{0}' to a byte.", value)
End Try

在执行二进制运算或数值转换时,开发人员始终有责任验证方法或运算符是否使用适当的数值表示形式来解释特定值。 以下示例演示了一种确保方法在将十六进制字符串表示形式转换为值时不会不当使用无符号二进制表示形式的方法 Byte 。 该示例确定值在将该值转换为字符串表示形式时是表示有符号整数还是无符号整数。 当示例将值转换回值时 Byte ,它会检查原始值是否为有符号整数。 如果是这样,并且其高阶位设置为 (指示值为负,并且它使用二的补数而不是无符号二进制表示形式) ,则该方法将引发异常。

// Create a negative hexadecimal value out of range of the Byte type.
sbyte sourceNumber = SByte.MinValue;
bool isSigned = Math.Sign((sbyte)sourceNumber.GetType().GetField("MinValue").GetValue(null)) == -1;
string value = sourceNumber.ToString("X");
byte targetNumber;
try
{
   targetNumber = Convert.ToByte(value, 16);
   if (isSigned && ((targetNumber & 0x80) != 0))
      throw new OverflowException();
   else
      Console.WriteLine("0x{0} converts to {1}.", value, targetNumber);
}
catch (OverflowException)
{
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned byte.", value);
}
// Displays the following to the console:
//    Unable to convert '0x80' to an unsigned byte.
// Create a negative hexadecimal value out of range of the Byte type.
let sourceNumber = SByte.MinValue
let isSigned = sign (sourceNumber.GetType().GetField("MinValue").GetValue null :?> int8) = -1
let value = sourceNumber.ToString "X"
try
    let targetNumber = Convert.ToByte(value, 16)
    if isSigned && targetNumber &&& 0x80uy <> 0uy then
        raise (OverflowException())
    else
        printfn $"0x{value} converts to {targetNumber}."
with :? OverflowException ->
    printfn $"Unable to convert '0x{value}' to an unsigned byte."
// Displays the following to the console:
//    Unable to convert '0x80' to an unsigned byte.
' Create a negative hexadecimal value out of range of the Byte type.
Dim sourceNumber As SByte = SByte.MinValue
Dim isSigned As Boolean = Math.Sign(sourceNumber.MinValue) = -1
Dim value As String = sourceNumber.ToString("X")
Dim targetNumber As Byte
Try
   targetNumber = Convert.ToByte(value, 16)
   If isSigned And ((targetNumber And &H80) <> 0) Then
      Throw New OverflowException()
   Else 
      Console.WriteLine("0x{0} converts to {1}.", value, targetNumber)
   End If    
Catch e As OverflowException
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned byte.", value)
End Try 
' Displays the following to the console:
'    Unable to convert '0x80' to an unsigned byte.

适用于

ToByte(Object, IFormatProvider)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

使用指定的区域性特定格式设置信息,将指定对象的值转换为 8 位无符号整数。

public:
 static System::Byte ToByte(System::Object ^ value, IFormatProvider ^ provider);
public static byte ToByte (object value, IFormatProvider provider);
public static byte ToByte (object? value, IFormatProvider? provider);
static member ToByte : obj * IFormatProvider -> byte
Public Shared Function ToByte (value As Object, provider As IFormatProvider) As Byte

参数

value
Object

一个实现 IConvertible 接口的对象。

provider
IFormatProvider

一个提供区域性特定的格式设置信息的对象。

返回

一个与 value 等效的 8 位无符号整数,如果 valuenull,则为零。

例外

value 未采用 Byte 值的属性格式。

value 不实现 IConvertible

不支持从 value 转换为 Byte 类型。

value 表示小于 Byte.MinValue 或大于 Byte.MaxValue 的数字。

示例

下面的示例定义一个实现 ByteString 接口的 IConvertible 类。 类存储字节值的字符串表示形式以及符号字段,以便它可以表示有符号和无符号字节值。

using System;
using System.Globalization;

public enum SignBit { Negative=-1, Zero=0, Positive=1 };

public struct ByteString : IConvertible
{
   private SignBit signBit;
   private string byteString;

   public SignBit Sign
   {
      set { signBit = value; }
      get { return signBit; }
   }

   public string Value
   {
      set {
         if (value.Trim().Length > 2)
            throw new ArgumentException("The string representation of a byte cannot have more than two characters.");
         else
            byteString = value;
      }
      get { return byteString; }
   }

   // IConvertible implementations.
   public TypeCode GetTypeCode() {
      return TypeCode.Object;
   }

   public bool ToBoolean(IFormatProvider provider)
   {
      if (signBit == SignBit.Zero)
         return false;
      else
         return true;
   }

   public byte ToByte(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToSByte(byteString, 16)));
      else
         return Byte.Parse(byteString, NumberStyles.HexNumber);
   }

   public char ToChar(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative) {
         throw new OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToSByte(byteString, 16)));
      }
      else {
         byte byteValue = Byte.Parse(this.byteString, NumberStyles.HexNumber);
         return Convert.ToChar(byteValue);
      }
   }

   public DateTime ToDateTime(IFormatProvider provider)
   {
      throw new InvalidCastException("ByteString to DateTime conversion is not supported.");
   }

   public decimal ToDecimal(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
      {
         sbyte byteValue = SByte.Parse(byteString, NumberStyles.HexNumber);
         return Convert.ToDecimal(byteValue);
      }
      else
      {
         byte byteValue = Byte.Parse(byteString, NumberStyles.HexNumber);
         return Convert.ToDecimal(byteValue);
      }
   }

   public double ToDouble(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToDouble(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToDouble(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public short ToInt16(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToInt16(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToInt16(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public int ToInt32(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToInt32(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToInt32(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public long ToInt64(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToInt64(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToInt64(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public sbyte ToSByte(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         try {
            return Convert.ToSByte(Byte.Parse(byteString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is outside the range of the SByte type.",
                                                   Byte.Parse(byteString, NumberStyles.HexNumber)), e);
         }
      else
         return SByte.Parse(byteString, NumberStyles.HexNumber);
   }

   public float ToSingle(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToSingle(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToSingle(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public string ToString(IFormatProvider provider)
   {
      return "0x" + this.byteString;
   }

   public object ToType(Type conversionType, IFormatProvider provider)
   {
      switch (Type.GetTypeCode(conversionType))
      {
         case TypeCode.Boolean:
            return this.ToBoolean(null);
         case TypeCode.Byte:
            return this.ToByte(null);
         case TypeCode.Char:
            return this.ToChar(null);
         case TypeCode.DateTime:
            return this.ToDateTime(null);
         case TypeCode.Decimal:
            return this.ToDecimal(null);
         case TypeCode.Double:
            return this.ToDouble(null);
         case TypeCode.Int16:
            return this.ToInt16(null);
         case TypeCode.Int32:
            return this.ToInt32(null);
         case TypeCode.Int64:
            return this.ToInt64(null);
         case TypeCode.Object:
            if (typeof(ByteString).Equals(conversionType))
               return this;
            else
               throw new InvalidCastException(String.Format("Conversion to a {0} is not supported.", conversionType.Name));
         case TypeCode.SByte:
            return this.ToSByte(null);
         case TypeCode.Single:
            return this.ToSingle(null);
         case TypeCode.String:
            return this.ToString(null);
         case TypeCode.UInt16:
            return this.ToUInt16(null);
         case TypeCode.UInt32:
            return this.ToUInt32(null);
         case TypeCode.UInt64:
            return this.ToUInt64(null);
         default:
            throw new InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name));
      }
   }

   public UInt16 ToUInt16(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt16 type.",
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt16(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public UInt32 ToUInt32(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt32 type.",
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt32(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public UInt64 ToUInt64(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt64 type.",
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt64(Byte.Parse(byteString, NumberStyles.HexNumber));
   }
}
open System
open System.Globalization

type SignBit =
   | Negative = -1
   | Zero = 0
   | Positive = 1

[<Struct>]
type ByteString =
    val mutable private value: string
    
    val mutable Sign : SignBit
    member this.Value
        with get () = this.value
        and set (value: string) =
            if value.Trim().Length > 2 then
                invalidArg "value" "The string representation of a byte cannot have more than two characters"
            else
                this.value <- value 

    // IConvertible implementations.
    interface IConvertible with
        member _.GetTypeCode() =
            TypeCode.Object

        member this.ToBoolean(provider: IFormatProvider) =
            this.Sign <> SignBit.Zero

        member this.ToByte(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Convert.ToSByte(this.value, 16)} is out of range of the Byte type.")
            else
                Byte.Parse(this.value, NumberStyles.HexNumber)

        member this.ToChar(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Convert.ToSByte(this.value, 16)} is out of range of the Char type.")
            else
                let byteValue = Byte.Parse(this.value, NumberStyles.HexNumber)
                Convert.ToChar byteValue

        member _.ToDateTime(provider: IFormatProvider) =
            raise (InvalidCastException "ByteString to DateTime conversion is not supported.")

        member this.ToDecimal(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                let byteValue = SByte.Parse(this.Value, NumberStyles.HexNumber)
                Convert.ToDecimal byteValue
            else
                let byteValue = Byte.Parse(this.Value, NumberStyles.HexNumber)
                Convert.ToDecimal byteValue

        member this.ToDouble(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToDouble(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToDouble(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToInt16(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToInt16(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToInt16(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToInt32(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToInt32(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToInt32(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToInt64(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToInt64(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToInt64(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToSByte(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                try
                    Convert.ToSByte(Byte.Parse(this.value, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{Byte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the SByte type.", e))
            else
                SByte.Parse(this.value, NumberStyles.HexNumber)

        member this.ToSingle(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToSingle(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToSingle(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToString(provider: IFormatProvider) =
            "0x" + this.value

        member this.ToType(conversionType: Type, provider: IFormatProvider): obj =
            let this = this :> IConvertible
            match Type.GetTypeCode conversionType with
            | TypeCode.Boolean ->
                this.ToBoolean null
            | TypeCode.Byte ->
                this.ToByte null
            | TypeCode.Char ->
                this.ToChar null
            | TypeCode.DateTime ->
                this.ToDateTime null
            | TypeCode.Decimal ->
                this.ToDecimal null
            | TypeCode.Double ->
                this.ToDouble null
            | TypeCode.Int16 ->
                this.ToInt16 null
            | TypeCode.Int32 ->
                this.ToInt32 null
            | TypeCode.Int64 ->
                this.ToInt64 null
            | TypeCode.Object ->
                if typeof<ByteString>.Equals conversionType then
                    this
                else
                    raise (InvalidCastException $"Conversion to a {conversionType.Name} is not supported.")
            | TypeCode.SByte ->
                this.ToSByte null
            | TypeCode.Single ->
                this.ToSingle null
            | TypeCode.String ->
                this.ToString null
            | TypeCode.UInt16 ->
                this.ToUInt16 null
            | TypeCode.UInt32 ->
                this.ToUInt32 null
            | TypeCode.UInt64 ->
                this.ToUInt64 null
            | _ ->
                raise (InvalidCastException $"Conversion to {conversionType.Name} is not supported.")

        member this.ToUInt16(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{SByte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the UInt16 type.")
            else
                Convert.ToUInt16(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToUInt32(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{SByte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the UInt32 type.")
            else
                Convert.ToUInt32(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToUInt64(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{SByte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the UInt64 type.")
            else
                Convert.ToUInt64(Byte.Parse(this.value, NumberStyles.HexNumber))
Imports System.Globalization

Public Enum SignBit As Integer
   Positive = 1
   Zero = 0
   Negative = -1
End Enum

Public Structure ByteString : Implements IConvertible
   Private signBit As SignBit
   Private byteString As String
   
   Public Property Sign As SignBit
      Set
         signBit = value
      End Set
      Get
         Return signBit
      End Get
   End Property
   
   Public Property Value As String
      Set
         If value.Trim().Length > 2 Then
            Throw New ArgumentException("The string representation of a byte cannot have more than two characters.")
         Else
            byteString = value
         End If   
      End Set
      Get
         Return byteString
      End Get
   End Property
   
   ' IConvertible implementations.
   Public Function GetTypeCode() As TypeCode _
                   Implements IConvertible.GetTypeCode
      Return TypeCode.Object
   End Function
   
   Public Function ToBoolean(provider As IFormatProvider) As Boolean _
                   Implements IConvertible.ToBoolean
      If signBit = SignBit.Zero Then
         Return False
      Else
         Return True
      End If
   End Function 
   
   Public Function ToByte(provider As IFormatProvider) As Byte _
                   Implements IConvertible.ToByte
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToSByte(byteString, 16))) 
      Else
         Return Byte.Parse(byteString, NumberStyles.HexNumber)
      End If       
   End Function
   
   Public Function ToChar(provider As IFormatProvider) As Char _
                   Implements IConvertible.ToChar
      If signBit = signBit.Negative Then 
         Throw New OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToSByte(byteString, 16)))
      Else
         Dim byteValue As Byte = Byte.Parse(Me.byteString, NumberStyles.HexNumber)
         Return Convert.ToChar(byteValue)
      End If                
   End Function 
   
   Public Function ToDateTime(provider As IFormatProvider) As Date _
                   Implements IConvertible.ToDateTime
      Throw New InvalidCastException("ByteString to DateTime conversion is not supported.")
   End Function
   
   Public Function ToDecimal(provider As IFormatProvider) As Decimal _
                   Implements IConvertible.ToDecimal
      If signBit = signBit.Negative Then
         Dim byteValue As SByte = SByte.Parse(byteString, NumberStyles.HexNumber)
         Return Convert.ToDecimal(byteValue)
      Else
         Dim byteValue As Byte = Byte.Parse(byteString, NumberStyles.HexNumber)
         Return Convert.ToDecimal(byteValue)
      End If
   End Function
   
   Public Function ToDouble(provider As IFormatProvider) As Double _
                   Implements IConvertible.ToDouble
      If signBit = signBit.Negative Then
         Return Convert.ToDouble(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToDouble(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function   
   
   Public Function ToInt16(provider As IFormatProvider) As Int16 _
                   Implements IConvertible.ToInt16
      If signBit = signBit.Negative Then
         Return Convert.ToInt16(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToInt16(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToInt32(provider As IFormatProvider) As Int32 _
                   Implements IConvertible.ToInt32
      If signBit = signBit.Negative Then
         Return Convert.ToInt32(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToInt32(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToInt64(provider As IFormatProvider) As Int64 _
                   Implements IConvertible.ToInt64
      If signBit = signBit.Negative Then
         Return Convert.ToInt64(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToInt64(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToSByte(provider As IFormatProvider) As SByte _
                   Implements IConvertible.ToSByte
      If signBit = SignBit.Positive Then
         Try
            Return Convert.ToSByte(Byte.Parse(byteString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is outside the range of the SByte type.", _
                                                   Byte.Parse(byteString, NumberStyles.HexNumber)), e)   
         End Try
      Else
         Return SByte.Parse(byteString, NumberStyles.HexNumber)
      End If
   End Function

   Public Function ToSingle(provider As IFormatProvider) As Single _
                   Implements IConvertible.ToSingle
      If signBit = signBit.Negative Then
         Return Convert.ToSingle(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToSingle(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function

   Public Overloads Function ToString(provider As IFormatProvider) As String _
                   Implements IConvertible.ToString
      Return Me.byteString
   End Function
   
   Public Function ToType(conversionType As Type, provider As IFormatProvider) As Object _
                   Implements IConvertible.ToType
      Select Case Type.GetTypeCode(conversionType)
         Case TypeCode.Boolean 
            Return Me.ToBoolean(Nothing)
         Case TypeCode.Byte
            Return Me.ToByte(Nothing)
         Case TypeCode.Char
            Return Me.ToChar(Nothing)
         Case TypeCode.DateTime
            Return Me.ToDateTime(Nothing)
         Case TypeCode.Decimal
            Return Me.ToDecimal(Nothing)
         Case TypeCode.Double
            Return Me.ToDouble(Nothing)
         Case TypeCode.Int16
            Return Me.ToInt16(Nothing)
         Case TypeCode.Int32
            Return Me.ToInt32(Nothing)
         Case TypeCode.Int64
            Return Me.ToInt64(Nothing)
         Case TypeCode.Object
            If GetType(ByteString).Equals(conversionType) Then
               Return Me
            Else
               Throw New InvalidCastException(String.Format("Conversion to a {0} is not supported.", conversionType.Name))
            End If 
         Case TypeCode.SByte
            Return Me.ToSByte(Nothing)
         Case TypeCode.Single
            Return Me.ToSingle(Nothing)
         Case TypeCode.String
            Return Me.ToString(Nothing)
         Case TypeCode.UInt16
            Return Me.ToUInt16(Nothing)
         Case TypeCode.UInt32
            Return Me.ToUInt32(Nothing)
         Case TypeCode.UInt64
            Return Me.ToUInt64(Nothing)   
         Case Else
            Throw New InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name))   
            
      End Select
   End Function
   
   Public Function ToUInt16(provider As IFormatProvider) As UInt16 _
                   Implements IConvertible.ToUInt16
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt16 type.", _
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt16(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function

   Public Function ToUInt32(provider As IFormatProvider) As UInt32 _
                   Implements IConvertible.ToUInt32
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt32 type.", _
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt32(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToUInt64(provider As IFormatProvider) As UInt64 _
                   Implements IConvertible.ToUInt64
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt64 type.", _
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt64(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
End Structure

以下示例实例化多个 ByteString 对象,并调用 ToByte(Object, IFormatProvider) 方法将其转换为字节值。 它说明 ToByte(Object, IFormatProvider) 方法包装对要转换的 对象的 方法的调用 IConvertible.ToByte

public class Class1
{
   public static void Main()
   {
      byte positiveByte = 216;
      sbyte negativeByte = -101;

      ByteString positiveString = new ByteString();
      positiveString.Sign = (SignBit) Math.Sign(positiveByte);
      positiveString.Value = positiveByte.ToString("X2");

      ByteString negativeString = new ByteString();
      negativeString.Sign = (SignBit) Math.Sign(negativeByte);
      negativeString.Value = negativeByte.ToString("X2");

      try {
         Console.WriteLine("'{0}' converts to {1}.", positiveString.Value, Convert.ToByte(positiveString));
      }
      catch (OverflowException) {
         Console.WriteLine("0x{0} is outside the range of the Byte type.", positiveString.Value);
      }

      try {
         Console.WriteLine("'{0}' converts to {1}.", negativeString.Value, Convert.ToByte(negativeString));
      }
      catch (OverflowException) {
         Console.WriteLine("0x{0} is outside the range of the Byte type.", negativeString.Value);
      }
   }
}
// The example displays the following output:
//       'D8' converts to 216.
//       0x9B is outside the range of the Byte type.
let positiveByte = 216uy
let negativeByte = -101y

let mutable positiveString = ByteString()
positiveString.Sign <- Math.Sign positiveByte |> enum
positiveString.Value <- positiveByte.ToString "X2"

let mutable negativeString = ByteString()
negativeString.Sign <- Math.Sign negativeByte |> enum
negativeString.Value <- negativeByte.ToString "X2"

try
    printfn $"'{positiveString.Value}' converts to {Convert.ToByte positiveString}."
with :? OverflowException ->
    printfn $"0x{positiveString.Value} is outside the range of the Byte type."

try
    printfn $"'{negativeString.Value}' converts to {Convert.ToByte negativeString}."
with :? OverflowException ->
    printfn $"0x{negativeString.Value} is outside the range of the Byte type."

// The example displays the following output:
//       'D8' converts to 216.
//       0x9B is outside the range of the Byte type.
Module modMain
   Public Sub Main()
      Dim positiveByte As Byte = 216
      Dim negativeByte As SByte = -101
      
      
      Dim positiveString As New ByteString()
      positiveString.Sign = CType(Math.Sign(positiveByte), SignBit)
      positiveString.Value = positiveByte.ToString("X2")
      
      Dim negativeString As New ByteString()
      negativeString.Sign = CType(Math.Sign(negativeByte), SignBit)
      negativeString.Value = negativeByte.ToString("X2")
      
      Try
         Console.WriteLine("'{0}' converts to {1}.", positiveString.Value, Convert.ToByte(positiveString))
      Catch e As OverflowException
         Console.WriteLine("0x{0} is outside the range of the Byte type.", positiveString.Value)
      End Try

      Try
         Console.WriteLine("'{0}' converts to {1}.", negativeString.Value, Convert.ToByte(negativeString))
      Catch e As OverflowException
         Console.WriteLine("0x{0} is outside the range of the Byte type.", negativeString.Value)
      End Try   
   End Sub
End Module
' The example dosplays the following output:
'       'D8' converts to 216.
'       0x9B is outside the range of the Byte type.

注解

provider 使用户能够指定有关 的内容 value的区域性特定转换信息。 基类型忽略 provider;但是,如果 value 是实现 IConvertible 接口的用户定义类型,则可以使用 参数。

适用于

ToByte(String, IFormatProvider)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

使用指定的区域性特定格式设置信息,将数字的指定字符串表示形式转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::String ^ value, IFormatProvider ^ provider);
public static byte ToByte (string value, IFormatProvider provider);
public static byte ToByte (string? value, IFormatProvider? provider);
static member ToByte : string * IFormatProvider -> byte
Public Shared Function ToByte (value As String, provider As IFormatProvider) As Byte

参数

value
String

包含要转换的数字的字符串。

provider
IFormatProvider

一个提供区域性特定的格式设置信息的对象。

返回

一个与 value 等效的 8 位无符号整数,如果 valuenull,则为零。

例外

value 不由一个可选符号后跟一系列数字 (0-9) 组成。

value 表示小于 Byte.MinValue 或大于 Byte.MaxValue 的数字

示例

以下示例创建一个自定义 NumberFormatInfo 对象,该对象将正号定义为“pos”,将负号定义为“neg”,并在调用 ToByte(String, IFormatProvider) 方法时使用该对象。 然后,它会重复调用 方法, ToByte(String, IFormatProvider) 将字符串数组中的每个元素转换为 Byte 值。

using System;
using System.Globalization;

public class Example
{
   public static void Main()
   {
      // Create a NumberFormatInfo object and set several of its
      // properties that apply to unsigned bytes.
      NumberFormatInfo provider = new NumberFormatInfo();

      // These properties affect the conversion.
      provider.PositiveSign = "pos ";
      provider.NegativeSign = "neg ";

      // This property does not affect the conversion.
      // The input string cannot have a decimal separator.
      provider.NumberDecimalSeparator = ".";

      // Define an array of numeric strings.
      string[] numericStrings = { "234", "+234", "pos 234", "234.", "255",
                                  "256", "-1" };

      foreach (string numericString in numericStrings)
      {
         Console.Write("'{0,-8}' ->   ", numericString);
         try {
            byte number = Convert.ToByte(numericString, provider);
            Console.WriteLine(number);
         }
         catch (FormatException) {
            Console.WriteLine("Incorrect Format");
         }
         catch (OverflowException) {
            Console.WriteLine("Overflows a Byte");
         }
      }
   }
}
// The example displays the following output:
//       '234     ' ->   234
//       '+234    ' ->   Incorrect Format
//       'pos 234 ' ->   234
//       '234.    ' ->   Incorrect Format
//       '255     ' ->   255
//       '256     ' ->   Overflows a Byte
//       '-1      ' ->   Incorrect Format
open System
open System.Globalization

// Create a NumberFormatInfo object and set several of its
// properties that apply to unsigned bytes.
let provider = NumberFormatInfo()

// These properties affect the conversion.
provider.PositiveSign <- "pos "
provider.NegativeSign <- "neg "

// This property does not affect the conversion.
// The input string cannot have a decimal separator.
provider.NumberDecimalSeparator <- "."

// Define an array of numeric strings.
let numericStrings = 
    [| "234"; "+234"; "pos 234"
       "234."; "255"; "256"; "-1" |]

for numericString in numericStrings do
    printf $"'{numericString,-8}' ->   "
    try
        let number = Convert.ToByte(numericString, provider)
        printfn $"{number}"
    with
    | :? FormatException ->
        printfn "Incorrect Format"
    | :? OverflowException ->
        printfn "Overflows a Byte"

// The example displays the following output:
//       '234     ' ->   234
//       '+234    ' ->   Incorrect Format
//       'pos 234 ' ->   234
//       '234.    ' ->   Incorrect Format
//       '255     ' ->   255
//       '256     ' ->   Overflows a Byte
//       '-1      ' ->   Incorrect Format
Imports System.Globalization

Module Example
   Public Sub Main()
      ' Create a NumberFormatInfo object and set several of its
      ' properties that apply to unsigned bytes.
      Dim provider As New NumberFormatInfo()
      With provider 
         ' These properties affect the conversion.
         .PositiveSign = "pos "
         .NegativeSign = "neg "

         ' This property does not affect the conversion.
         ' The input string cannot have a decimal separator.
         .NumberDecimalSeparator = "."
      End With
      
      ' Define an array of numeric strings.
      Dim numericStrings() As String = { "234", "+234", "pos 234", "234.", _
                                         "255", "256", "-1" }

      For Each numericString As String In numericStrings
         Console.Write("'{0,-8}' ->   ", numericString)
         Try
            Dim number As Byte = Convert.ToByte(numericString, provider)
            Console.WriteLine(number)
         Catch ex As FormatException
            Console.WriteLine("Incorrect Format")                          
         Catch ex As OverflowException
            Console.WriteLine("Overflows a Byte")
         End Try   
      Next
   End Sub   
End Module 
' The example displays the following output:
'       '234     ' ->   234
'       '+234    ' ->   Incorrect Format
'       'pos 234 ' ->   234
'       '234.    ' ->   Incorrect Format
'       '255     ' ->   255
'       '256     ' ->   Overflows a Byte
'       '-1      ' ->   Incorrect Format

注解

provider 是获取 IFormatProviderNumberFormatInfo 对象的实例。 对象 NumberFormatInfo 提供有关 格式的 value区域性特定信息。 如果 providernull,则 NumberFormatInfo 使用当前区域性的 对象。

如果希望在转换失败时不处理异常,可以改为调用 Byte.TryParse 方法。 它返回一个 Boolean 值,该值指示转换是成功还是失败。

另请参阅

适用于

ToByte(Single)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定的单精度浮点数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(float value);
public static byte ToByte (float value);
static member ToByte : single -> byte
Public Shared Function ToByte (value As Single) As Byte

参数

value
Single

单精度浮点数。

返回

value,舍入为最接近的 8 位无符号整数。 如果 value 为两个整数中间的数字,则返回二者中的偶数;即 4.5 转换为 4,而 5.5 转换为 6。

例外

value 大于 Byte.MaxValue 或小于 Byte.MinValue

示例

以下示例将 Single 值转换为 Byte

public:
   void ConvertByteSingle( Byte byteVal )
   {
      float floatVal;
      
      // Byte to float conversion will not overflow.
      floatVal = System::Convert::ToSingle( byteVal );
      System::Console::WriteLine( "The Byte as a float is {0}.",
         floatVal );
      
      // Float to Byte conversion can overflow.
      try
      {
         byteVal = System::Convert::ToByte( floatVal );
         System::Console::WriteLine( "The float as a Byte is {0}.",
         byteVal );
      }
      catch ( System::OverflowException^ ) 
      {
         System::Console::WriteLine(
            "The float value is too large for a Byte." );
      }
   }
public void ConvertByteSingle(byte byteVal) {
    float floatVal;

    // Byte to float conversion will not overflow.
    floatVal = System.Convert.ToSingle(byteVal);
    System.Console.WriteLine("The byte as a float is {0}.",
        floatVal);

    // Float to byte conversion can overflow.
    try {
        byteVal = System.Convert.ToByte(floatVal);
        System.Console.WriteLine("The float as a byte is {0}.",
            byteVal);
    }
    catch (System.OverflowException) {
        System.Console.WriteLine(
            "The float value is too large for a byte.");
    }
}
let convertByteSingle (byteVal: byte) =
    // Byte to float conversion will not overflow.
    let floatVal = Convert.ToSingle byteVal
    printfn $"The byte as a float is {floatVal}."

    // Float to byte conversion can overflow.
    try
        let byteVal = Convert.ToByte floatVal
        printfn $"The float as a byte is {byteVal}."
    with :? OverflowException ->
        printfn "The float value is too large for a byte."
Public Sub ConvertByteSingle(ByVal byteVal As Byte)
    Dim singleVal As Single

    ' Byte to float conversion will not overflow.
    singleVal = System.Convert.ToSingle(byteVal)
    System.Console.WriteLine("The byte as a single is {0}.", _
                              singleVal)

    ' Single to byte conversion can overflow.
    Try
        byteVal = System.Convert.ToByte(singleVal)
        System.Console.WriteLine("The single as a byte is {0}.", _
                                  byteVal)
    Catch exception As System.OverflowException
        System.Console.WriteLine( _
            "Overflow in single-to-byte conversion.")
    End Try
End Sub

另请参阅

适用于

ToByte(UInt64)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

重要

此 API 不符合 CLS。

将指定的 64 位无符号整数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::UInt64 value);
[System.CLSCompliant(false)]
public static byte ToByte (ulong value);
[<System.CLSCompliant(false)>]
static member ToByte : uint64 -> byte
Public Shared Function ToByte (value As ULong) As Byte

参数

value
UInt64

要转换的 64 位无符号整数。

返回

一个与 value 等效的 8 位无符号整数。

属性

例外

示例

以下示例将无符号长整数数组转换为 Byte 值。

ulong[] numbers= { UInt64.MinValue, 121, 340, UInt64.MaxValue };
byte result;
foreach (ulong number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException)
   {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       Converted the UInt64 value 0 to the Byte value 0.
//       Converted the UInt64 value 121 to the Byte value 121.
//       The UInt64 value 340 is outside the range of the Byte type.
//       The UInt64 value 18446744073709551615 is outside the range of the Byte type.
let numbers= [| UInt64.MinValue; 121uL; 340uL; UInt64.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       Converted the UInt64 value 0 to the Byte value 0.
//       Converted the UInt64 value 121 to the Byte value 121.
//       The UInt64 value 340 is outside the range of the Byte type.
//       The UInt64 value 18446744073709551615 is outside the range of the Byte type.
Dim numbers() As ULong = { UInt64.MinValue, 121, 340, UInt64.MaxValue }
Dim result As Byte
For Each number As ULong In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       Converted the UInt64 value 0 to the Byte value 0.
'       Converted the UInt64 value 121 to the Byte value 121.
'       The UInt64 value 340 is outside the range of the Byte type.
'       The UInt64 value 18446744073709551615 is outside the range of the Byte type.

适用于

ToByte(SByte)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

重要

此 API 不符合 CLS。

将指定的 8 位有符号整数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::SByte value);
[System.CLSCompliant(false)]
public static byte ToByte (sbyte value);
[<System.CLSCompliant(false)>]
static member ToByte : sbyte -> byte
Public Shared Function ToByte (value As SByte) As Byte

参数

value
SByte

要转换的 8 位有符号整数。

返回

一个与 value 等效的 8 位无符号整数。

属性

例外

示例

以下示例将值的数组 SByte 转换为 Byte 值。

sbyte[] numbers = { SByte.MinValue, -1, 0, 10, SByte.MaxValue };
byte result;
foreach (sbyte number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException)
   {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The SByte value -128 is outside the range of the Byte type.
//       The SByte value -1 is outside the range of the Byte type.
//       Converted the SByte value 0 to the Byte value 0.
//       Converted the SByte value 10 to the Byte value 10.
//       Converted the SByte value 127 to the Byte value 127.
let numbers = [| SByte.MinValue; -1y; 0y; 10y; SByte.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The SByte value -128 is outside the range of the Byte type.
//       The SByte value -1 is outside the range of the Byte type.
//       Converted the SByte value 0 to the Byte value 0.
//       Converted the SByte value 10 to the Byte value 10.
//       Converted the SByte value 127 to the Byte value 127.
Dim numbers() As SByte = { SByte.MinValue, -1, 0, 10, SByte.MaxValue }
Dim result As Byte
For Each number As SByte In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The SByte value -128 is outside the range of the Byte type.
'       The SByte value -1 is outside the range of the Byte type.
'       Converted the SByte value 0 to the Byte value 0.
'       Converted the SByte value 10 to the Byte value 10.
'       Converted the SByte value 127 to the Byte value 127.

适用于

ToByte(DateTime)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

调用此方法始终引发 InvalidCastException

public:
 static System::Byte ToByte(DateTime value);
public static byte ToByte (DateTime value);
static member ToByte : DateTime -> byte
Public Shared Function ToByte (value As DateTime) As Byte

参数

value
DateTime

要转换的日期和时间值。

返回

不支持此转换。 不返回任何值。

例外

不支持此转换。

适用于

ToByte(Int64)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定的 64 位有符号整数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(long value);
public static byte ToByte (long value);
static member ToByte : int64 -> byte
Public Shared Function ToByte (value As Long) As Byte

参数

value
Int64

要转换的 64 位带符号整数。

返回

一个与 value 等效的 8 位无符号整数。

例外

value 小于 Byte.MinValue 或大于 Byte.MaxValue

示例

以下示例将值的数组 Int64 转换为 Byte 值。

long[] numbers = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue };
byte result;
foreach (long number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The Int64 value -9223372036854775808 is outside the range of the Byte type.
//       The Int64 value -1 is outside the range of the Byte type.
//       Converted the Int64 value 0 to the Byte value 0.
//       Converted the Int64 value 121 to the Byte value 121.
//       The Int64 value 340 is outside the range of the Byte type.
//       The Int64 value 9223372036854775807 is outside the range of the Byte type.
let numbers = [| Int64.MinValue; -1L; 0L; 121L; 34L; Int64.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The Int64 value -9223372036854775808 is outside the range of the Byte type.
//       The Int64 value -1 is outside the range of the Byte type.
//       Converted the Int64 value 0 to the Byte value 0.
//       Converted the Int64 value 121 to the Byte value 121.
//       The Int64 value 340 is outside the range of the Byte type.
//       The Int64 value 9223372036854775807 is outside the range of the Byte type.
Dim numbers() As Long = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue }
Dim result As Byte
For Each number As Long In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The Int64 value -9223372036854775808 is outside the range of the Byte type.
'       The Int64 value -1 is outside the range of the Byte type.
'       Converted the Int64 value 0 to the Byte value 0.
'       Converted the Int64 value 121 to the Byte value 121.
'       The Int64 value 340 is outside the range of the Byte type.
'       The Int64 value 9223372036854775807 is outside the range of the Byte type.

适用于

ToByte(Byte)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

返回指定的 8 位无符号整数;不执行任何实际的转换。

public:
 static System::Byte ToByte(System::Byte value);
public static byte ToByte (byte value);
static member ToByte : byte -> byte
Public Shared Function ToByte (value As Byte) As Byte

参数

value
Byte

要返回的 8 位无符号整数。

返回

不经更改即返回 value

适用于

ToByte(Char)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定 Unicode 字符的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(char value);
public static byte ToByte (char value);
static member ToByte : char -> byte
Public Shared Function ToByte (value As Char) As Byte

参数

value
Char

要转换的 Unicode 字符。

返回

一个与 value 等效的 8 位无符号整数。

例外

示例

以下示例将值的数组 Char 转换为 Byte 值。

char[] chars = { 'a', 'z', '\x0007', '\x03FF' };
foreach (char ch in chars)
{
   try {
      byte result = Convert.ToByte(ch);
      Console.WriteLine("{0} is converted to {1}.", ch, result);
   }
   catch (OverflowException) {
      Console.WriteLine("Unable to convert u+{0} to a byte.",
                        Convert.ToInt16(ch).ToString("X4"));
   }
}
// The example displays the following output:
//       a is converted to 97.
//       z is converted to 122.
//        is converted to 7.
//       Unable to convert u+03FF to a byte.
let chars = [| 'a'; 'z'; '\u0007'; '\u03FF' |]
for ch in chars do
    try
        let result = Convert.ToByte ch
        printfn $"{ch} is converted to {result}."
    with :? OverflowException ->
        printfn $"Unable to convert u+{Convert.ToInt16 ch:X4} to a byte."
// The example displays the following output:
//       a is converted to 97.
//       z is converted to 122.
//        is converted to 7.
//       Unable to convert u+03FF to a byte.
Dim chars() As Char = { "a"c, "z"c, ChrW(7), ChrW(1023) }
For Each ch As Char in chars
   Try
      Dim result As Byte = Convert.ToByte(ch)
      Console.WriteLine("{0} is converted to {1}.", ch, result)
   Catch e As OverflowException
      Console.WriteLIne("Unable to convert u+{0} to a byte.", _
                        AscW(ch).ToString("X4"))
   End Try
Next   
' The example displays the following output:
'       a is converted to 97.
'       z is converted to 122.
'        is converted to 7.
'       Unable to convert u+03FF to a byte.

注解

此方法返回一个无符号字节值,该值表示传递给它的 对象的数值代码 Char 。 在 .NET 中, Char 对象是一个 16 位值。 这意味着该方法适用于返回 ASCII 字符范围或 Unicode C0 控件和基本拉丁语以及 C1 控件和拉丁文 1 补充范围(从 U+0000 到 U+00FF)中的字符的数字代码。

适用于

ToByte(Decimal)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定的十进制数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(System::Decimal value);
public static byte ToByte (decimal value);
static member ToByte : decimal -> byte
Public Shared Function ToByte (value As Decimal) As Byte

参数

value
Decimal

要转换的数字。

返回

value,舍入为最接近的 8 位无符号整数。 如果 value 为两个整数中间的数字,则返回二者中的偶数;即 4.5 转换为 4,而 5.5 转换为 6。

例外

value 大于 Byte.MaxValue 或小于 Byte.MinValue

注解

以下示例将 Byte 值转换为 , DecimalDecimal 值转换为 Byte

public:
   void ConvertByteDecimal( Byte byteVal )
   {
      Decimal decimalVal;
      
      // Byte to decimal conversion will not overflow.
      decimalVal = System::Convert::ToDecimal( byteVal );
      System::Console::WriteLine( "The Byte as a decimal is {0}.",
         decimalVal );
      
      // Decimal to Byte conversion can overflow.
      try
      {
         byteVal = System::Convert::ToByte( decimalVal );
         System::Console::WriteLine( "The Decimal as a Byte is {0}.",
         byteVal );
      }
      catch ( System::OverflowException^ ) 
      {
         System::Console::WriteLine(
            "The decimal value is too large for a Byte." );
      }
   }
public void ConvertByteDecimal(byte byteVal) {
    decimal decimalVal;

    // Byte to decimal conversion will not overflow.
    decimalVal = System.Convert.ToDecimal(byteVal);
    System.Console.WriteLine("The byte as a decimal is {0}.",
        decimalVal);

    // Decimal to byte conversion can overflow.
    try {
        byteVal = System.Convert.ToByte(decimalVal);
        System.Console.WriteLine("The Decimal as a byte is {0}.",
            byteVal);
    }
    catch (System.OverflowException) {
        System.Console.WriteLine(
            "The decimal value is too large for a byte.");
    }
}
let convertByteDecimal (byteVal: byte) =
    // Byte to decimal conversion will not overflow.
    let decimalVal = Convert.ToDecimal byteVal
    printfn $"The byte as a decimal is {decimalVal}."

    // Decimal to byte conversion can overflow.
    try
        let byteVal = Convert.ToByte decimalVal
        printfn $"The Decimal as a byte is {byteVal}."
    with :? OverflowException ->
        printfn "The decimal value is too large for a byte."
Public Sub ConvertByteDecimal(ByVal byteVal As Byte)
    Dim decimalVal As Decimal

    ' Byte to decimal conversion will not overflow.
    decimalVal = System.Convert.ToDecimal(byteVal)
    System.Console.WriteLine("The byte as a decimal is {0}.", _
                              decimalVal)

    ' Decimal to byte conversion can overflow.
    Try
        byteVal = System.Convert.ToByte(decimalVal)
        System.Console.WriteLine("The Decimal as a byte is {0}.", _
                                  byteVal)
    Catch exception As System.OverflowException
        System.Console.WriteLine( _
            "Overflow in decimal-to-byte conversion.")
    End Try
End Sub

适用于

ToByte(Boolean)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定的布尔值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(bool value);
public static byte ToByte (bool value);
static member ToByte : bool -> byte
Public Shared Function ToByte (value As Boolean) As Byte

参数

value
Boolean

要转换的布尔值。

返回

如果 valuetrue,则为数字 1;否则,为 0。

示例

下面的示例演示了 到 值的转换BooleanByte

using namespace System;

void main()
{
   bool falseFlag = false;
   bool trueFlag = true;

   Console::WriteLine("{0} converts to {1}.", falseFlag,
                      Convert::ToByte(falseFlag));
   Console::WriteLine("{0} converts to {1}.", trueFlag, 
                      Convert::ToByte(trueFlag));
}
// The example displays the following output:
//       False converts to 0.
//       True converts to 1.
bool falseFlag = false;
bool trueFlag = true;

Console.WriteLine("{0} converts to {1}.", falseFlag,
                  Convert.ToByte(falseFlag));
Console.WriteLine("{0} converts to {1}.", trueFlag,
                  Convert.ToByte(trueFlag));
// The example displays the following output:
//       False converts to 0.
//       True converts to 1.
let falseFlag = false
let trueFlag = true

printfn $"{falseFlag} converts to {Convert.ToByte falseFlag}."
printfn $"{trueFlag} converts to {Convert.ToByte trueFlag}."
// The example displays the following output:
//       False converts to 0.
//       True converts to 1.
Dim falseFlag As Boolean = False
Dim trueFlag As Boolean = True

Console.WriteLine("{0} converts to {1}.", falseFlag, _
                  Convert.ToByte(falseFlag))
Console.WriteLine("{0} converts to {1}.", trueFlag, _
                  Convert.ToByte(trueFlag))
' The example displays the following output:
'       False converts to 0.
'       True converts to 1.

适用于

ToByte(Int16)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定的 16 位有符号整数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(short value);
public static byte ToByte (short value);
static member ToByte : int16 -> byte
Public Shared Function ToByte (value As Short) As Byte

参数

value
Int16

要转换的 16 位带符号整数。

返回

一个与 value 等效的 8 位无符号整数。

例外

value 小于 Byte.MinValue 或大于 Byte.MaxValue

示例

以下示例将值的数组 Int16 转换为 Byte 值。

short[] numbers = { Int16.MinValue, -1, 0, 121, 340, Int16.MaxValue };
byte result;
foreach (short number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The Int16 value -32768 is outside the range of the Byte type.
//       The Int16 value -1 is outside the range of the Byte type.
//       Converted the Int16 value 0 to the Byte value 0.
//       Converted the Int16 value 121 to the Byte value 121.
//       The Int16 value 340 is outside the range of the Byte type.
//       The Int16 value 32767 is outside the range of the Byte type.
let numbers = [| Int16.MinValue; -1s; 0s; 121s; 340s; Int16.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The Int16 value -32768 is outside the range of the Byte type.
//       The Int16 value -1 is outside the range of the Byte type.
//       Converted the Int16 value 0 to the Byte value 0.
//       Converted the Int16 value 121 to the Byte value 121.
//       The Int16 value 340 is outside the range of the Byte type.
//       The Int16 value 32767 is outside the range of the Byte type.
Dim numbers() As Short = { Int16.MinValue, -1, 0, 121, 340, Int16.MaxValue }
Dim result As Byte
For Each number As Short In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The Int16 value -32768 is outside the range of the Byte type.
'       The Int16 value -1 is outside the range of the Byte type.
'       Converted the Int16 value 0 to the Byte value 0.
'       Converted the Int16 value 121 to the Byte value 121.
'       The Int16 value 340 is outside the range of the Byte type.
'       The Int16 value 32767 is outside the range of the Byte type.

适用于

ToByte(Int32)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定的 32 位有符号整数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(int value);
public static byte ToByte (int value);
static member ToByte : int -> byte
Public Shared Function ToByte (value As Integer) As Byte

参数

value
Int32

要转换的 32 位带符号整数。

返回

一个与 value 等效的 8 位无符号整数。

例外

value 小于 Byte.MinValue 或大于 Byte.MaxValue

示例

以下示例将值的数组 Int32 转换为 Byte 值。

int[] numbers = { Int32.MinValue, -1, 0, 121, 340, Int32.MaxValue };
byte result;
foreach (int number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The Int32 value -2147483648 is outside the range of the Byte type.
//       The Int32 value -1 is outside the range of the Byte type.
//       Converted the Int32 value 0 to the Byte value 0.
//       Converted the Int32 value 121 to the Byte value 121.
//       The Int32 value 340 is outside the range of the Byte type.
//       The Int32 value 2147483647 is outside the range of the Byte type.
let numbers = [| Int32.MinValue; -1; 0; 121; 340; Int32.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The Int32 value -2147483648 is outside the range of the Byte type.
//       The Int32 value -1 is outside the range of the Byte type.
//       Converted the Int32 value 0 to the Byte value 0.
//       Converted the Int32 value 121 to the Byte value 121.
//       The Int32 value 340 is outside the range of the Byte type.
//       The Int32 value 2147483647 is outside the range of the Byte type.
Dim numbers() As Integer = { Int32.MinValue, -1, 0, 121, 340, Int32.MaxValue }
Dim result As Byte
For Each number As Integer In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The Int32 value -2147483648 is outside the range of the Byte type.
'       The Int32 value -1 is outside the range of the Byte type.
'       Converted the Int32 value 0 to the Byte value 0.
'       Converted the Int32 value 121 to the Byte value 121.
'       The Int32 value 340 is outside the range of the Byte type.
'       The Int32 value 2147483647 is outside the range of the Byte type.

适用于

ToByte(Double)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定的双精度浮点数的值转换为等效的 8 位无符号整数。

public:
 static System::Byte ToByte(double value);
public static byte ToByte (double value);
static member ToByte : double -> byte
Public Shared Function ToByte (value As Double) As Byte

参数

value
Double

要转换的双精度浮点数。

返回

value,舍入为最接近的 8 位无符号整数。 如果 value 为两个整数中间的数字,则返回二者中的偶数;即 4.5 转换为 4,而 5.5 转换为 6。

例外

value 大于 Byte.MaxValue 或小于 Byte.MinValue

示例

以下示例将 Byte 值转换为 , DoubleDouble 值转换为 Byte

public:
   void ConvertDoubleByte( double doubleVal )
   {
      Byte byteVal = 0;
      
      // Double to Byte conversion can overflow.
      try
      {
         byteVal = System::Convert::ToByte( doubleVal );
         System::Console::WriteLine( " {0} as a Byte is: {1}.",
         doubleVal, byteVal );
      }
      catch ( System::OverflowException^ ) 
      {
         System::Console::WriteLine( "Overflow in double-to-Byte conversion." );
      }
      
      // Byte to double conversion cannot overflow.
      doubleVal = System::Convert::ToDouble( byteVal );
      System::Console::WriteLine( " {0} as a double is: {1}.",
         byteVal, doubleVal );
   }
public void ConvertDoubleByte(double doubleVal) {
    byte	byteVal = 0;

    // Double to byte conversion can overflow.
    try {
        byteVal = System.Convert.ToByte(doubleVal);
        System.Console.WriteLine("{0} as a byte is: {1}.",
            doubleVal, byteVal);
    }
    catch (System.OverflowException) {
        System.Console.WriteLine(
            "Overflow in double-to-byte conversion.");
    }

    // Byte to double conversion cannot overflow.
    doubleVal = System.Convert.ToDouble(byteVal);
    System.Console.WriteLine("{0} as a double is: {1}.",
        byteVal, doubleVal);
}
let convertDoubleByte (doubleVal: float) =
    // Double to byte conversion can overflow.
    try
        let byteVal = Convert.ToByte doubleVal
        printfn $"{doubleVal} as a byte is: {byteVal}."
        
        // Byte to double conversion cannot overflow.
        let doubleVal = Convert.ToDouble byteVal
        printfn $"{byteVal} as a double is: {doubleVal}."
    with :? OverflowException ->
        printfn "Overflow in double-to-byte conversion."
Public Sub ConvertDoubleByte(ByVal doubleVal As Double)
    Dim byteVal As Byte = 0

    ' Double to Byte conversion can overflow.
    Try
        byteVal = System.Convert.ToByte(doubleVal)
        System.Console.WriteLine("{0} as a Byte is: {1}.", _
            doubleVal, byteVal)
    Catch exception As System.OverflowException
        System.Console.WriteLine( _
            "Overflow in Double-to-Byte conversion.")
    End Try

    ' Byte to Double conversion cannot overflow.
    doubleVal = System.Convert.ToDouble(byteVal)
    System.Console.WriteLine("{0} as a Double is: {1}.", _
                              byteVal, doubleVal)
End Sub

适用于

ToByte(Object)

Source:
Convert.cs
Source:
Convert.cs
Source:
Convert.cs

将指定对象的值转换为 8 位无符号整数。

public:
 static System::Byte ToByte(System::Object ^ value);
public static byte ToByte (object value);
public static byte ToByte (object? value);
static member ToByte : obj -> byte
Public Shared Function ToByte (value As Object) As Byte

参数

value
Object

用于实现 IConvertible 接口的对象,或为 null

返回

一个与 value 等效的 8 位无符号整数,如果 valuenull,则为零。

例外

value 未采用 Byte 值的属性格式。

value 不实现 IConvertible

不支持从 value 转换为 Byte 类型。

value 表示小于 Byte.MinValue 或大于 Byte.MaxValue 的数字

示例

以下示例使用 ToByte(Object) 方法将 对象的数组转换为 Byte 值。

object[] values = { true, -12, 163, 935, 'x', "104", "103.0", "-1",
                    "1.00e2", "One", 1.00e2};
byte result;
foreach (object value in values)
{
   try {
      result = Convert.ToByte(value);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        value.GetType().Name, value,
                        result.GetType().Name, result);
   }
   catch (OverflowException)
   {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        value.GetType().Name, value);
   }
   catch (FormatException)
   {
      Console.WriteLine("The {0} value {1} is not in a recognizable format.",
                        value.GetType().Name, value);
   }
   catch (InvalidCastException)
   {
      Console.WriteLine("No conversion to a Byte exists for the {0} value {1}.",
                        value.GetType().Name, value);
   }
}
// The example displays the following output:
//       Converted the Boolean value True to the Byte value 1.
//       The Int32 value -12 is outside the range of the Byte type.
//       Converted the Int32 value 163 to the Byte value 163.
//       The Int32 value 935 is outside the range of the Byte type.
//       Converted the Char value x to the Byte value 120.
//       Converted the String value 104 to the Byte value 104.
//       The String value 103.0 is not in a recognizable format.
//       The String value -1 is outside the range of the Byte type.
//       The String value 1.00e2 is not in a recognizable format.
//       The String value One is not in a recognizable format.
//       Converted the Double value 100 to the Byte value 100.
let values: obj[] = 
    [| true; -12; 163; 935; 'x'; "104"; "103.0" 
       "-1"; "1.00e2"; "One"; 1.00e2 |]
for value in values do
    try
        let result = Convert.ToByte value
        printfn $"Converted the {value.GetType().Name} value {value} to the {result.GetType().Name} value {result}."
    with
    | :? OverflowException ->
        printfn $"The {value.GetType().Name} value {value} is outside the range of the Byte type."
    | :? FormatException ->
        printfn $"The {value.GetType().Name} value {value} is not in a recognizable format."
    | :? InvalidCastException ->
        printfn $"No conversion to a Byte exists for the {value.GetType().Name} value {value}."
// The example displays the following output:
//       Converted the Boolean value True to the Byte value 1.
//       The Int32 value -12 is outside the range of the Byte type.
//       Converted the Int32 value 163 to the Byte value 163.
//       The Int32 value 935 is outside the range of the Byte type.
//       Converted the Char value x to the Byte value 120.
//       Converted the String value 104 to the Byte value 104.
//       The String value 103.0 is not in a recognizable format.
//       The String value -1 is outside the range of the Byte type.
//       The String value 1.00e2 is not in a recognizable format.
//       The String value One is not in a recognizable format.
//       Converted the Double value 100 to the Byte value 100.
Dim values() As Object = { True, -12, 163, 935, "x"c, "104", "103.0", "-1", _
                           "1.00e2", "One", 1.00e2}
Dim result As Byte
For Each value As Object In values
   Try
      result = Convert.ToByte(value)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                        value.GetType().Name, value, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        value.GetType().Name, value)
   Catch e As FormatException
      Console.WriteLine("The {0} value {1} is not in a recognizable format.", _
                        value.GetType().Name, value)
   Catch e As InvalidCastException
      Console.WriteLine("No conversion to a Byte exists for the {0} value {1}.", _
                        value.GetType().Name, value)
                        
   End Try
Next                           
' The example displays the following output:
'       Converted the Boolean value True to the Byte value 1.
'       The Int32 value -12 is outside the range of the Byte type.
'       Converted the Int32 value 163 to the Byte value 163.
'       The Int32 value 935 is outside the range of the Byte type.
'       Converted the Char value x to the Byte value 120.
'       Converted the String value 104 to the Byte value 104.
'       The String value 103.0 is not in a recognizable format.
'       The String value -1 is outside the range of the Byte type.
'       The String value 1.00e2 is not in a recognizable format.
'       The String value One is not in a recognizable format.
'       Converted the Double value 100 to the Byte value 100.

注解

如果 value 不是 null,则此方法包装对 IConvertible.ToByte 的基础类型的 实现的 value调用。

适用于