GraphicsPath.AddClosedCurve 方法
定义
重要
一些信息与预发行产品相关,相应产品在发行之前可能会进行重大修改。 对于此处提供的信息,Microsoft 不作任何明示或暗示的担保。
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。
重载
AddClosedCurve(Point[]) |
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。 |
AddClosedCurve(PointF[]) |
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。 |
AddClosedCurve(ReadOnlySpan<Point>) | |
AddClosedCurve(ReadOnlySpan<PointF>) | |
AddClosedCurve(Point[], Single) |
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。 |
AddClosedCurve(PointF[], Single) |
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。 |
AddClosedCurve(ReadOnlySpan<Point>, Single) | |
AddClosedCurve(ReadOnlySpan<PointF>, Single) |
AddClosedCurve(Point[])
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。
public:
void AddClosedCurve(cli::array <System::Drawing::Point> ^ points);
public:
void AddClosedCurve(... cli::array <System::Drawing::Point> ^ points);
public void AddClosedCurve (System.Drawing.Point[] points);
public void AddClosedCurve (params System.Drawing.Point[] points);
member this.AddClosedCurve : System.Drawing.Point[] -> unit
Public Sub AddClosedCurve (points As Point())
Public Sub AddClosedCurve (ParamArray points As Point())
参数
示例
有关示例,请参见 AddClosedCurve(Point[], Single)。
注解
如果需要,用户必须保留原始点。 原始点在内部转换为三次方贝塞尔控制点,因此没有返回原始点的机制。 如果数组中的 points
第一个点和最后一个点不是同一个点,则通过连接这两个点来关闭曲线。 不能为此方法设置紧张值,并且默认为等效于 0.5 的值。
适用于
AddClosedCurve(PointF[])
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。
public:
void AddClosedCurve(cli::array <System::Drawing::PointF> ^ points);
public:
void AddClosedCurve(... cli::array <System::Drawing::PointF> ^ points);
public void AddClosedCurve (System.Drawing.PointF[] points);
public void AddClosedCurve (params System.Drawing.PointF[] points);
member this.AddClosedCurve : System.Drawing.PointF[] -> unit
Public Sub AddClosedCurve (points As PointF())
Public Sub AddClosedCurve (ParamArray points As PointF())
参数
示例
有关示例,请参见 AddClosedCurve(Point[], Single)。
注解
如果需要,用户必须保留原始点。 原始点在内部转换为三次方贝塞尔控制点,因此没有返回原始点的机制。 如果数组中的 points
第一个点和最后一个点不是同一个点,则通过连接这两个点来关闭曲线。 不能为此方法设置紧张值,并且默认为等效于 0.5 的值。
适用于
AddClosedCurve(ReadOnlySpan<Point>)
- Source:
- GraphicsPath.cs
public:
void AddClosedCurve(ReadOnlySpan<System::Drawing::Point> points);
public void AddClosedCurve (ReadOnlySpan<System.Drawing.Point> points);
member this.AddClosedCurve : ReadOnlySpan<System.Drawing.Point> -> unit
Public Sub AddClosedCurve (points As ReadOnlySpan(Of Point))
参数
- points
- ReadOnlySpan<Point>
适用于
AddClosedCurve(ReadOnlySpan<PointF>)
- Source:
- GraphicsPath.cs
public:
void AddClosedCurve(ReadOnlySpan<System::Drawing::PointF> points);
public void AddClosedCurve (ReadOnlySpan<System.Drawing.PointF> points);
member this.AddClosedCurve : ReadOnlySpan<System.Drawing.PointF> -> unit
Public Sub AddClosedCurve (points As ReadOnlySpan(Of PointF))
参数
- points
- ReadOnlySpan<PointF>
适用于
AddClosedCurve(Point[], Single)
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。
public:
void AddClosedCurve(cli::array <System::Drawing::Point> ^ points, float tension);
public void AddClosedCurve (System.Drawing.Point[] points, float tension);
member this.AddClosedCurve : System.Drawing.Point[] * single -> unit
Public Sub AddClosedCurve (points As Point(), tension As Single)
参数
- tension
- Single
介于 0 到 1 之间的一个值,它指定曲线在点与点之间弯曲的程度,0 表示最小弯曲(最锐拐角),1 表示最平滑弯曲。
示例
下面的代码示例设计用于 Windows 窗体,它需要 PaintEventArgse
事件OnPaint对象。 此代码执行以下操作:
创建一个由六个点构成的数组, (表示基数样条) 。
创建一个路径,并将闭合基数样条曲线添加到 (从端点关闭到起点) 的路径。
绘制到屏幕的路径。
请注意,使用 0.5 的紧张度。
private:
void AddClosedCurveExample( PaintEventArgs^ e )
{
// Creates a symetrical, closed curve.
array<Point>^ myArray = {Point(20,100),Point(40,150),Point(60,125),Point(40,100),Point(60,75),Point(40,50)};
// Create a new path and add curve.
GraphicsPath^ myPath = gcnew GraphicsPath;
myPath->AddClosedCurve( myArray, .5f );
Pen^ myPen = gcnew Pen( Color::Black,2.0f );
// Draw the path to screen.
e->Graphics->DrawPath( myPen, myPath );
}
private void AddClosedCurveExample(PaintEventArgs e)
{
// Creates a symmetrical, closed curve.
Point[] myArray =
{
new Point(20,100),
new Point(40,150),
new Point(60,125),
new Point(40,100),
new Point(60,75),
new Point(40,50)
};
// Create a new path and add curve.
GraphicsPath myPath = new GraphicsPath();
myPath.AddClosedCurve(myArray,.5f);
Pen myPen = new Pen(Color.Black, 2);
// Draw the path to screen.
e.Graphics.DrawPath(myPen, myPath);
}
Public Sub AddClosedCurveExample(ByVal e As PaintEventArgs)
' Creates a symmetrical, closed curve.
Dim myArray As Point() = {New Point(20, 100), New Point(40, 150), _
New Point(60, 125), New Point(40, 100), New Point(60, 75), _
New Point(40, 50)}
Dim myPath As New GraphicsPath
myPath.AddClosedCurve(myArray, 0.5F)
Dim myPen As New Pen(Color.Black, 2)
e.Graphics.DrawPath(myPen, myPath)
End Sub
注解
如果需要,用户必须保留原始点。 原始点在内部转换为三次方贝塞尔控制点,因此没有返回原始点的机制。 如果数组中的 points
第一个点和最后一个点不是同一个点,则通过连接这两个点来关闭曲线。
适用于
AddClosedCurve(PointF[], Single)
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
向此路径添加一个闭合曲线。 由于曲线经过数组中的每个点,因此使用基数样条曲线。
public:
void AddClosedCurve(cli::array <System::Drawing::PointF> ^ points, float tension);
public void AddClosedCurve (System.Drawing.PointF[] points, float tension);
member this.AddClosedCurve : System.Drawing.PointF[] * single -> unit
Public Sub AddClosedCurve (points As PointF(), tension As Single)
参数
- tension
- Single
介于 0 到 1 之间的一个值,它指定曲线在点与点之间弯曲的程度,0 表示最小弯曲(最锐拐角),1 表示最平滑弯曲。
示例
有关示例,请参见 AddClosedCurve(Point[], Single)。
注解
如果需要,用户必须保留原始点。 原始点在内部转换为三次方贝塞尔控制点,因此没有返回原始点的机制。 如果数组中的 points
第一个点和最后一个点不是同一个点,则通过连接这两个点来关闭曲线。
适用于
AddClosedCurve(ReadOnlySpan<Point>, Single)
- Source:
- GraphicsPath.cs
public:
void AddClosedCurve(ReadOnlySpan<System::Drawing::Point> points, float tension);
public void AddClosedCurve (ReadOnlySpan<System.Drawing.Point> points, float tension);
member this.AddClosedCurve : ReadOnlySpan<System.Drawing.Point> * single -> unit
Public Sub AddClosedCurve (points As ReadOnlySpan(Of Point), tension As Single)
参数
- points
- ReadOnlySpan<Point>
- tension
- Single
适用于
AddClosedCurve(ReadOnlySpan<PointF>, Single)
- Source:
- GraphicsPath.cs
public:
void AddClosedCurve(ReadOnlySpan<System::Drawing::PointF> points, float tension);
public void AddClosedCurve (ReadOnlySpan<System.Drawing.PointF> points, float tension);
member this.AddClosedCurve : ReadOnlySpan<System.Drawing.PointF> * single -> unit
Public Sub AddClosedCurve (points As ReadOnlySpan(Of PointF), tension As Single)
参数
- points
- ReadOnlySpan<PointF>
- tension
- Single
适用于
反馈
https://aka.ms/ContentUserFeedback。
即将发布:在整个 2024 年,我们将逐步淘汰作为内容反馈机制的“GitHub 问题”,并将其取代为新的反馈系统。 有关详细信息,请参阅:提交和查看相关反馈