Graphics.FillClosedCurve 方法

定义

命名空间:

System.Drawing

程序集:

System.Drawing.Common.dll

包:

System.Drawing.Common v9.0.0-preview.6.24327.6

填充由 Point 结构数组定义的闭合基线曲线的内部。

重载

FillClosedCurve(Brush, Point[])	填充由 Point 结构数组定义的闭合基线曲线的内部。
FillClosedCurve(Brush, PointF[])	填充由 PointF 结构数组定义的闭合基线曲线的内部。
FillClosedCurve(Brush, Point[], FillMode)	使用指定的填充模式填充由 Point 结构数组定义的封闭基数样条曲线的内部。
FillClosedCurve(Brush, PointF[], FillMode)	使用指定的填充模式填充由 PointF 结构数组定义的封闭基数样条曲线的内部。
FillClosedCurve(Brush, Point[], FillMode, Single)	使用指定的填充模式和紧张度填充由 Point 结构数组定义的封闭基线曲线的内部。
FillClosedCurve(Brush, PointF[], FillMode, Single)	使用指定的填充模式和紧张度填充由 PointF 结构数组定义的封闭基线曲线的内部。

FillClosedCurve(Brush, Point[])

Source:

Graphics.cs

填充由 Point 结构数组定义的闭合基线曲线的内部。

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::Point> ^ points);

public void FillClosedCurve (System.Drawing.Brush brush, params System.Drawing.Point[] points);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] -> unit

Public Sub FillClosedCurve (brush As Brush, ParamArray points As Point())

参数

brush

Brush

确定填充特征的 Brush。

points

Point[]

定义样条的 Point 结构的数组。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯红色画笔。

• 创建四个点的数组以定义样条。

• 填充屏幕上的曲线。

曲线的默认紧张度为 0.5。

public:
   void FillClosedCurvePoint( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      //Create array of points for curve.
      Point point1 = Point(100,100);
      Point point2 = Point(200,50);
      Point point3 = Point(250,200);
      Point point4 = Point(50,150);
      array<Point>^ points = {point1,point2,point3,point4};

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points );
   }

public void FillClosedCurvePoint(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    //Create array of points for curve.
    Point point1 = new Point(100, 100);
    Point point2 = new Point(200,  50);
    Point point3 = new Point(250, 200);
    Point point4 = new Point(50, 150);
    Point[] points = {point1, point2, point3, point4};
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points);
}

Public Sub FillClosedCurvePoint(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    'Create array of points for curve.
    Dim point1 As New Point(100, 100)
    Dim point2 As New Point(200, 50)
    Dim point3 As New Point(250, 200)
    Dim point4 As New Point(50, 150)
    Dim points As Point() = {point1, point2, point3, point4}

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points)
End Sub

注解

此方法填充通过数组中每个点的封闭基样线的内部。 如果最后一个点与第一个点不匹配，则会将一个额外的曲线段从最后一个点添加到第一个点以关闭它。

点数组必须至少包含四个 Point 结构。

此方法使用默认的 0.5 紧张。

FillClosedCurve(Brush, PointF[])

Source:

Graphics.cs

填充由 PointF 结构数组定义的闭合基线曲线的内部。

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::PointF> ^ points);

public void FillClosedCurve (System.Drawing.Brush brush, params System.Drawing.PointF[] points);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] -> unit

Public Sub FillClosedCurve (brush As Brush, ParamArray points As PointF())

参数

brush

Brush

确定填充特征的 Brush。

points

PointF[]

定义样条的 PointF 结构的数组。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯红色画笔。

• 创建四个点的数组以定义样条。

• 填充屏幕上的曲线。

曲线的默认紧张度为 0.5。

public:
   void FillClosedCurvePointF( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      //Create array of points for curve.
      PointF point1 = PointF(100.0F,100.0F);
      PointF point2 = PointF(200.0F,50.0F);
      PointF point3 = PointF(250.0F,200.0F);
      PointF point4 = PointF(50.0F,150.0F);
      array<PointF>^ points = {point1,point2,point3,point4};

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points );
   }

public void FillClosedCurvePointF(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    //Create array of points for curve.
    PointF point1 = new PointF(100.0F, 100.0F);
    PointF point2 = new PointF(200.0F,  50.0F);
    PointF point3 = new PointF(250.0F, 200.0F);
    PointF point4 = new PointF(50.0F, 150.0F);
    PointF[] points = {point1, point2, point3, point4};
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points);
}

Public Sub FillClosedCurvePointF(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    'Create array of points for curve.
    Dim point1 As New PointF(100.0F, 100.0F)
    Dim point2 As New PointF(200.0F, 50.0F)
    Dim point3 As New PointF(250.0F, 200.0F)
    Dim point4 As New PointF(50.0F, 150.0F)
    Dim points As PointF() = {point1, point2, point3, point4}

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points)
End Sub

注解

此方法填充通过数组中每个点的封闭基样线的内部。 如果最后一个点与第一个点不匹配，则会将一个额外的曲线段从最后一个点添加到第一个点以关闭它。

点数组必须至少包含四个 PointF 结构。

此方法使用默认的 0.5 紧张。

FillClosedCurve(Brush, Point[], FillMode)

Source:

Graphics.cs

使用指定的填充模式填充由 Point 结构数组定义的封闭基数样条曲线的内部。

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillmode);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillmode);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillClosedCurve (brush As Brush, points As Point(), fillmode As FillMode)

参数

brush

Brush

确定填充特征的 Brush。

points

Point[]

定义样条的 Point 结构的数组。

fillmode

FillMode

确定曲线填充方式的 FillMode 枚举的成员。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯红色画笔。

• 创建四个点的数组以定义样条。

• 将填充模式设置为 Winding。

• 填充屏幕上的曲线。

曲线的默认紧张度为 0.5。

public:
   void FillClosedCurvePointFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      //Create array of points for curve.
      Point point1 = Point(100,100);
      Point point2 = Point(200,50);
      Point point3 = Point(250,200);
      Point point4 = Point(50,150);
      array<Point>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode );
   }

public void FillClosedCurvePointFillMode(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    //Create array of points for curve.
    Point point1 = new Point(100, 100);
    Point point2 = new Point(200,  50);
    Point point3 = new Point(250, 200);
    Point point4 = new Point(50, 150);
    Point[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode);
}

Public Sub FillClosedCurvePointFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    'Create array of points for curve.
    Dim point1 As New Point(100, 100)
    Dim point2 As New Point(200, 50)
    Dim point3 As New Point(250, 200)
    Dim point4 As New Point(50, 150)
    Dim points As Point() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode)
End Sub

注解

此方法填充通过数组中每个点的封闭基样线的内部。 如果最后一个点与第一个点不匹配，则会将一个额外的曲线段从最后一个点添加到第一个点以关闭它。

点数组必须至少包含四个 Point 结构。

此方法使用默认的 0.5 紧张。

FillClosedCurve(Brush, PointF[], FillMode)

Source:

Graphics.cs

使用指定的填充模式填充由 PointF 结构数组定义的封闭基数样条曲线的内部。

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillmode);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillmode);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillClosedCurve (brush As Brush, points As PointF(), fillmode As FillMode)

参数

brush

Brush

确定填充特征的 Brush。

points

PointF[]

定义样条的 PointF 结构的数组。

fillmode

FillMode

确定曲线填充方式的 FillMode 枚举的成员。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯红色画笔。

• 创建四个点的数组以定义样条。

• 将填充模式设置为 Winding。

• 填充屏幕上的曲线。

曲线的默认紧张度为 0.5。

public:
   void FillClosedCurvePointFFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      // Create array of points for curve.
      PointF point1 = PointF(100.0F,100.0F);
      PointF point2 = PointF(200.0F,50.0F);
      PointF point3 = PointF(250.0F,200.0F);
      PointF point4 = PointF(50.0F,150.0F);
      array<PointF>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode );
   }

public void FillClosedCurvePointFFillMode(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    // Create array of points for curve.
    PointF point1 = new PointF(100.0F, 100.0F);
    PointF point2 = new PointF(200.0F,  50.0F);
    PointF point3 = new PointF(250.0F, 200.0F);
    PointF point4 = new PointF(50.0F, 150.0F);
    PointF[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode);
}

Public Sub FillClosedCurvePointFFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    ' Create array of points for curve.
    Dim point1 As New PointF(100.0F, 100.0F)
    Dim point2 As New PointF(200.0F, 50.0F)
    Dim point3 As New PointF(250.0F, 200.0F)
    Dim point4 As New PointF(50.0F, 150.0F)
    Dim points As PointF() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode)
End Sub

注解

此方法填充通过数组中每个点的封闭基样线的内部。 如果最后一个点与第一个点不匹配，则会将一个额外的曲线段从最后一个点添加到第一个点以关闭它。

点数组必须至少包含四个 Point 结构。

此方法使用默认的 0.5 紧张。

FillClosedCurve(Brush, Point[], FillMode, Single)

Source:

Graphics.cs

使用指定的填充模式和紧张度填充由 Point 结构数组定义的封闭基线曲线的内部。

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillmode, float tension);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillmode, float tension);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode * single -> unit

Public Sub FillClosedCurve (brush As Brush, points As Point(), fillmode As FillMode, tension As Single)

参数

brush

Brush

确定填充特征的 Brush。

points

Point[]

定义样条的 Point 结构的数组。

fillmode

FillMode

确定曲线填充方式的 FillMode 枚举的成员。

tension

Single

大于或等于 0.0F 的值，该值指定曲线的紧张度。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯红色画笔。

• 创建四个点的数组以定义样条。

• 将填充模式设置为 Winding。

• 将紧张度设置为 1.0。

• 填充屏幕上的曲线。

public:
   void FillClosedCurvePointFillModeTension( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      // Create array of points for curve.
      Point point1 = Point(100,100);
      Point point2 = Point(200,50);
      Point point3 = Point(250,200);
      Point point4 = Point(50,150);
      array<Point>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Set tension.
      float tension = 1.0F;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode, tension );
   }

public void FillClosedCurvePointFillModeTension(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    // Create array of points for curve.
    Point point1 = new Point(100, 100);
    Point point2 = new Point(200,  50);
    Point point3 = new Point(250, 200);
    Point point4 = new Point(50, 150);
    Point[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Set tension.
    float tension = 1.0F;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension);
}

Public Sub FillClosedCurvePointFillModeTension(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    ' Create array of points for curve.
    Dim point1 As New Point(100, 100)
    Dim point2 As New Point(200, 50)
    Dim point3 As New Point(250, 200)
    Dim point4 As New Point(50, 150)
    Dim points As Point() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Set tension.
    Dim tension As Single = 1.0F

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension)
End Sub

注解

此方法填充通过数组中每个点的封闭基样线的内部。 如果最后一个点与第一个点不匹配，则会将一个额外的曲线段从最后一个点添加到第一个点以关闭它。

点数组必须至少包含四个 Point 结构。

tension 参数确定样条的形状。 如果 tension 参数的值为 0.0F，此方法将绘制直线段以连接点。 通常，tension 参数小于或等于 1.0F。 超过 1.0F 的值会产生异常结果。

FillClosedCurve(Brush, PointF[], FillMode, Single)

Source:

Graphics.cs

使用指定的填充模式和紧张度填充由 PointF 结构数组定义的封闭基线曲线的内部。

public:
 void FillClosedCurve(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillmode, float tension);

public void FillClosedCurve (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillmode, float tension);

member this.FillClosedCurve : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode * single -> unit

Public Sub FillClosedCurve (brush As Brush, points As PointF(), fillmode As FillMode, tension As Single)

参数

brush

Brush

确定填充特征的 Brush。

points

PointF[]

定义样条的 PointF 结构的数组。

fillmode

FillMode

确定曲线填充方式的 FillMode 枚举的成员。

tension

Single

大于或等于 0.0F 的值，该值指定曲线的紧张度。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯红色画笔。

• 创建四个点的数组以定义样条。

• 将填充模式设置为 Winding。

• 将紧张度设置为 1.0。

• 填充屏幕上的曲线。

public:
   void FillClosedCurvePointFFillModeTension( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );

      // Create array of points for curve.
      PointF point1 = PointF(100.0F,100.0F);
      PointF point2 = PointF(200.0F,50.0F);
      PointF point3 = PointF(250.0F,200.0F);
      PointF point4 = PointF(50.0F,150.0F);
      array<PointF>^ points = {point1,point2,point3,point4};

      // Set fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Set tension.
      float tension = 1.0F;

      // Fill curve on screen.
      e->Graphics->FillClosedCurve( redBrush, points, newFillMode, tension );
   }

public void FillClosedCurvePointFFillModeTension(PaintEventArgs e)
{
             
    // Create solid brush.
    SolidBrush redBrush = new SolidBrush(Color.Red);
             
    // Create array of points for curve.
    PointF point1 = new PointF(100.0F, 100.0F);
    PointF point2 = new PointF(200.0F,  50.0F);
    PointF point3 = new PointF(250.0F, 200.0F);
    PointF point4 = new PointF(50.0F, 150.0F);
    PointF[] points = {point1, point2, point3, point4};
             
    // Set fill mode.
    FillMode newFillMode = FillMode.Winding;
             
    // Set tension.
    float tension = 1.0F;
             
    // Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension);
}

Public Sub FillClosedCurvePointFFillModeTension(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim redBrush As New SolidBrush(Color.Red)

    ' Create array of points for curve.
    Dim point1 As New PointF(100.0F, 100.0F)
    Dim point2 As New PointF(200.0F, 50.0F)
    Dim point3 As New PointF(250.0F, 200.0F)
    Dim point4 As New PointF(50.0F, 150.0F)
    Dim points As PointF() = {point1, point2, point3, point4}

    ' Set fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Set tension.
    Dim tension As Single = 1.0F

    ' Fill curve on screen.
    e.Graphics.FillClosedCurve(redBrush, points, newFillMode, tension)
End Sub

注解

此方法填充通过数组中每个点的封闭基样线的内部。 如果最后一个点与第一个点不匹配，则会将一个额外的曲线段从最后一个点添加到第一个点以关闭它。

点数组必须至少包含四个 Point 结构。

tension 参数确定样条的形状。 如果 tension 参数的值为 0.0F，此方法将绘制直线段以连接点。 通常，tension 参数小于或等于 1.0F。 超过 1.0F 的值会产生异常结果。