Graphics.FillPolygon 方法

定义

命名空间:

System.Drawing

程序集:

System.Drawing.Common.dll

包:

System.Drawing.Common v9.0.0-preview.7.24405.4

填充由 Point 结构指定的点数组定义的多边形的内部。

重载

FillPolygon(Brush, PointF[], FillMode)	使用指定的填充模式填充由 PointF 结构指定的点数组定义的多边形的内部。
FillPolygon(Brush, Point[], FillMode)	使用指定的填充模式填充由 Point 结构指定的点数组定义的多边形的内部。
FillPolygon(Brush, PointF[])	填充由 PointF 结构指定的点数组定义的多边形的内部。
FillPolygon(Brush, Point[])	填充由 Point 结构指定的点数组定义的多边形的内部。

FillPolygon(Brush, PointF[], FillMode)

Source:

Graphics.cs

使用指定的填充模式填充由 PointF 结构指定的点数组定义的多边形的内部。

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillMode);

public void FillPolygon (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillMode);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillPolygon (brush As Brush, points As PointF(), fillMode As FillMode)

参数

brush

Brush

确定填充特征的 Brush。

points

PointF[]

表示要填充的多边形顶点的 PointF 结构的数组。

fillMode

FillMode

确定填充样式的 FillMode 枚举的成员。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯蓝色画笔。

• 创建七个点的数组来定义多边形。

• 将填充模式设置为 Winding。

• 填充屏幕上的多边形区域。

public:
   void FillPolygonPointFFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }

public void FillPolygonPointFFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}

Public Sub FillPolygonPointFFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

注解

数组中的每两个连续点指定多边形的一侧。 此外，如果最后一个点和第一个点不相吻合，则它们指定多边形的右端。

FillPolygon(Brush, Point[], FillMode)

Source:

Graphics.cs

使用指定的填充模式填充由 Point 结构指定的点数组定义的多边形的内部。

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillMode);

public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillMode);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode -> unit

Public Sub FillPolygon (brush As Brush, points As Point(), fillMode As FillMode)

参数

brush

Brush

确定填充特征的 Brush。

points

Point[]

表示要填充的多边形顶点的 Point 结构的数组。

fillMode

FillMode

确定填充样式的 FillMode 枚举的成员。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯蓝色画笔。

• 创建七个点的数组来定义多边形。

• 将填充模式设置为 Winding。

• 填充屏幕上的多边形区域。

public:
   void FillPolygonPointFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }

public void FillPolygonPointFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}

Public Sub FillPolygonPointFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

注解

数组中的每两个连续点指定多边形的一侧。 此外，如果最后一个点和第一个点不相吻合，则它们指定多边形的右端。

FillPolygon(Brush, PointF[])

Source:

Graphics.cs

填充由 PointF 结构指定的点数组定义的多边形的内部。

public:
 void FillPolygon(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::PointF> ^ points);

public void FillPolygon (System.Drawing.Brush brush, params System.Drawing.PointF[] points);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] -> unit

Public Sub FillPolygon (brush As Brush, ParamArray points As PointF())

参数

brush

Brush

确定填充特征的 Brush。

points

PointF[]

表示要填充的多边形顶点的 PointF 结构的数组。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯蓝色画笔。

• 创建七个点的数组来定义多边形。

• 填充屏幕上的多边形区域。

public:
   void FillPolygonPointF( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }

public void FillPolygonPointF(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}

Public Sub FillPolygonPointF(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

注解

数组中的每两个连续点指定多边形的一侧。 此外，如果最后一个点和第一个点不相吻合，则它们指定多边形的右端。

FillPolygon(Brush, Point[])

Source:

Graphics.cs

填充由 Point 结构指定的点数组定义的多边形的内部。

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points);

public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points);

member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] -> unit

Public Sub FillPolygon (brush As Brush, points As Point())

参数

brush

Brush

确定填充特征的 Brush。

points

Point[]

表示要填充的多边形顶点的 Point 结构的数组。

例外

ArgumentNullException

brush null。

-或-

points null。

示例

下面的代码示例设计用于 Windows 窗体，它需要 PaintEventArgse，这是 Paint 事件处理程序的参数。 该代码执行以下操作：

• 创建纯蓝色画笔。

• 创建七个点的数组来定义多边形。

• 填充屏幕上的多边形区域。

public:
   void FillPolygonPoint( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }

public void FillPolygonPoint(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}

Public Sub FillPolygonPoint(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

注解

数组中的每两个连续点指定多边形的一侧。 此外，如果最后一个点和第一个点不相吻合，则它们指定多边形的右端。