Thread.VolatileWrite 方法

定义

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

重载

VolatileWrite(UIntPtr, UIntPtr)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(UInt64, UInt64)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(UInt32, UInt32)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(UInt16, UInt16)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(Single, Single)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(SByte, SByte)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(Object, Object)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(IntPtr, IntPtr)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(Int16, Int16)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(Int32, Int32)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(Double, Double)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(Byte, Byte)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(Int64, Int64)
已过时.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

VolatileWrite(UIntPtr, UIntPtr)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

重要

此 API 不符合 CLS。

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(UIntPtr % address, UIntPtr value);
[System.CLSCompliant(false)]
public static void VolatileWrite (ref UIntPtr address, UIntPtr value);
[System.CLSCompliant(false)]
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref UIntPtr address, UIntPtr value);
[<System.CLSCompliant(false)>]
static member VolatileWrite : unativeint * unativeint -> unit
[<System.CLSCompliant(false)>]
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : unativeint * unativeint -> unit
Public Shared Sub VolatileWrite (ByRef address As UIntPtr, value As UIntPtr)

参数

address
UIntPtr

unativeint

将向其中写入值的字段。

value
UIntPtr

unativeint

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已替换为 Volatile.ReadVolatile.Write。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(UInt64, UInt64)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

重要

此 API 不符合 CLS。

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(System::UInt64 % address, System::UInt64 value);
[System.CLSCompliant(false)]
public static void VolatileWrite (ref ulong address, ulong value);
[System.CLSCompliant(false)]
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref ulong address, ulong value);
[<System.CLSCompliant(false)>]
static member VolatileWrite : uint64 * uint64 -> unit
[<System.CLSCompliant(false)>]
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : uint64 * uint64 -> unit
Public Shared Sub VolatileWrite (ByRef address As ULong, value As ULong)

参数

address
UInt64

将向其中写入值的字段。

value
UInt64

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已替换为 Volatile.ReadVolatile.Write。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(UInt32, UInt32)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

重要

此 API 不符合 CLS。

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(System::UInt32 % address, System::UInt32 value);
[System.CLSCompliant(false)]
public static void VolatileWrite (ref uint address, uint value);
[System.CLSCompliant(false)]
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref uint address, uint value);
[<System.CLSCompliant(false)>]
static member VolatileWrite : uint32 * uint32 -> unit
[<System.CLSCompliant(false)>]
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : uint32 * uint32 -> unit
Public Shared Sub VolatileWrite (ByRef address As UInteger, value As UInteger)

参数

address
UInt32

将向其中写入值的字段。

value
UInt32

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已替换为 Volatile.ReadVolatile.Write。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(UInt16, UInt16)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

重要

此 API 不符合 CLS。

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(System::UInt16 % address, System::UInt16 value);
[System.CLSCompliant(false)]
public static void VolatileWrite (ref ushort address, ushort value);
[System.CLSCompliant(false)]
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref ushort address, ushort value);
[<System.CLSCompliant(false)>]
static member VolatileWrite : uint16 * uint16 -> unit
[<System.CLSCompliant(false)>]
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : uint16 * uint16 -> unit
Public Shared Sub VolatileWrite (ByRef address As UShort, value As UShort)

参数

address
UInt16

将向其中写入值的字段。

value
UInt16

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已替换为 Volatile.ReadVolatile.Write。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(Single, Single)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(float % address, float value);
public static void VolatileWrite (ref float address, float value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref float address, float value);
static member VolatileWrite : single * single -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : single * single -> unit
Public Shared Sub VolatileWrite (ByRef address As Single, value As Single)

参数

address
Single

将向其中写入值的字段。

value
Single

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已替换为 Volatile.ReadVolatile.Write。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(SByte, SByte)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

重要

此 API 不符合 CLS。

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(System::SByte % address, System::SByte value);
[System.CLSCompliant(false)]
public static void VolatileWrite (ref sbyte address, sbyte value);
[System.CLSCompliant(false)]
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref sbyte address, sbyte value);
[<System.CLSCompliant(false)>]
static member VolatileWrite : sbyte * sbyte -> unit
[<System.CLSCompliant(false)>]
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : sbyte * sbyte -> unit
Public Shared Sub VolatileWrite (ByRef address As SByte, value As SByte)

参数

address
SByte

将向其中写入值的字段。

value
SByte

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已替换为 Volatile.ReadVolatile.Write。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(Object, Object)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(System::Object ^ % address, System::Object ^ value);
public static void VolatileWrite (ref object? address, object? value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref object? address, object? value);
public static void VolatileWrite (ref object address, object value);
static member VolatileWrite : obj * obj -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : obj * obj -> unit
Public Shared Sub VolatileWrite (ByRef address As Object, value As Object)

参数

address
Object

将向其中写入值的字段。

value
Object

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已被 和 Volatile.Write取代Volatile.Read。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(IntPtr, IntPtr)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(IntPtr % address, IntPtr value);
public static void VolatileWrite (ref IntPtr address, IntPtr value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref IntPtr address, IntPtr value);
static member VolatileWrite : nativeint * nativeint -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : nativeint * nativeint -> unit
Public Shared Sub VolatileWrite (ByRef address As IntPtr, value As IntPtr)

参数

address
IntPtr

nativeint

将向其中写入值的字段。

value
IntPtr

nativeint

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已被 和 Volatile.Write取代Volatile.Read。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(Int16, Int16)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(short % address, short value);
public static void VolatileWrite (ref short address, short value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref short address, short value);
static member VolatileWrite : int16 * int16 -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : int16 * int16 -> unit
Public Shared Sub VolatileWrite (ByRef address As Short, value As Short)

参数

address
Int16

将向其中写入值的字段。

value
Int16

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已被 和 Volatile.Write取代Volatile.Read。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(Int32, Int32)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(int % address, int value);
public static void VolatileWrite (ref int address, int value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref int address, int value);
static member VolatileWrite : int * int -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : int * int -> unit
Public Shared Sub VolatileWrite (ByRef address As Integer, value As Integer)

参数

address
Int32

将向其中写入值的字段。

value
Int32

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已被 和 Volatile.Write取代Volatile.Read。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(Double, Double)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(double % address, double value);
public static void VolatileWrite (ref double address, double value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref double address, double value);
static member VolatileWrite : double * double -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : double * double -> unit
Public Shared Sub VolatileWrite (ByRef address As Double, value As Double)

参数

address
Double

将向其中写入值的字段。

value
Double

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已被 和 Volatile.Write取代Volatile.Read。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(Byte, Byte)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(System::Byte % address, System::Byte value);
public static void VolatileWrite (ref byte address, byte value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref byte address, byte value);
static member VolatileWrite : byte * byte -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : byte * byte -> unit
Public Shared Sub VolatileWrite (ByRef address As Byte, value As Byte)

参数

address
Byte

将向其中写入值的字段。

value
Byte

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已被 和 Volatile.Write取代Volatile.Read。 有关更多信息,请参见 Volatile 类。

适用于

VolatileWrite(Int64, Int64)

Source:
Thread.cs
Source:
Thread.cs
Source:
Thread.cs

注意

Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.

向字段中写入值。 在需要进行此操作的系统上,插入防止处理器重新对内存操作进行排序的内存屏障,如下所示:如果读取或写入操作在代码中出现在此方法之前,则处理器无法将其移至此方法之后。

public:
 static void VolatileWrite(long % address, long value);
public static void VolatileWrite (ref long address, long value);
[System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")]
public static void VolatileWrite (ref long address, long value);
static member VolatileWrite : int64 * int64 -> unit
[<System.Obsolete("Thread.VolatileRead and Thread.VolatileWrite are obsolete. Use Volatile.Read or Volatile.Write respectively instead.", DiagnosticId="SYSLIB0054", UrlFormat="https://aka.ms/dotnet-warnings/{0}")>]
static member VolatileWrite : int64 * int64 -> unit
Public Shared Sub VolatileWrite (ByRef address As Long, value As Long)

参数

address
Int64

将向其中写入值的字段。

value
Int64

要写入的值。

属性

注解

Thread.VolatileReadThread.VolatileWrite 是旧 API,已被 和 Volatile.Write取代Volatile.Read。 有关更多信息,请参见 Volatile 类。

适用于