The Set-SCStorageFileServerNode cmdlet modifies a file server node.
Parameters
-BMCAddress
Specifies, or updates, the out-of-band baseboard management controller (BMC) address for a specific physical machine.
This might be an IP address, the fully qualified domain name (FQDN), or the DNS prefix (which is usually the same name as the NetBIOS name).
Typically, the BMC address and its connection to the network are separate from the IP address associated with a standard network adapter.
Alternatively, some computers do use a standard network adapter to provide a single address for the BMC and for the network adapter.
However, the BMC address has a unique port and is thus uniquely identifiable on the network.
Example IPv4 format: -BMCAddress "10.0.0.21"
Example Ipv6 format: -BMCAddress "2001:4898:2a:3:657b:9c7a:e1f0:6829"
Example FQDN format: -BMCAddress "Computer01.Contoso.com"
Example NetBIOS format: -BMCAddress "Computer01"
Note: By default, VMM uses an IP address or FQDN for the BMCAddress.
However, it is also possible to create a Windows PowerShell module that enables you to specify other types of addresses as the BMC address.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-BMCCustomConfigurationProvider
Specifies, or updates, a configuration provider object for a baseboard management controller (BMC).
A configuration provider is a plug-in to VMM that translates VMM PowerShell commands to API calls that are specific to a type of baseboard management controller.
You should use this parameter with the Custom BMCProtocol.
Parameter properties
Type:
ConfigurationProvider
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-BMCPort
Specifies, or updates, the out-of-band baseboard management controller (BMC) port for a specific physical machine.
A BMC port is also known as a service processor port.
Example default ports are 623 for IPMI and 443 for SMASH over WS-Man.
Parameter properties
Type:
UInt32
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-BMCProtocol
Specifies, or updates, the protocol that VMM uses to communicate with the out-of-band baseboard management controller (BMC).
Valid values are: IPMI, SMASH, Custom.
A BMC (also known as a service processor or management controller) is a specialized controller on the motherboard of a server that acts an interface between the hardware and system management software.
If the motherboard of a physical machine includes a BMC, when the machine is plugged in (whether it is powered off or powered on, and whether or not an operating system is installed), information about system hardware and the state of that system hardware health is available.
Example format: -BMCProtocol "Custom"
Note: The Custom protocol requires that you use the BMCCustomConfigurationProvider parameter.
Parameter properties
Type:
OutOfBandManagementType
Default value:
None
Accepted values:
None, IPMI, SMASH, Custom
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-BMCRunAsAccount
Specifies the Run As account to use with the baseboard management controller (BMC) device.
Parameter properties
Type:
RunAsAccount
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-JobVariable
Specifies a variable in which job progress is tracked and stored.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-PROTipID
Specifies the ID of the Performance and Resource Optimization tip (PRO tip) that triggered this action.
This parameter lets you audit PRO tips.
Parameter properties
Type:
Guid
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-RunAsynchronously
Indicates that the job runs asynchronously so that control returns to the command shell immediately.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-StorageFileServerNode
Specifies an array of storage file server node objects.
Parameter properties
Type:
StorageFileServerNode
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
0
Mandatory:
True
Value from pipeline:
True
Value from pipeline by property name:
False
Value from remaining arguments:
False
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable,
-InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable,
-ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see
about_CommonParameters.