Console.ReadKey 方法

參考

定義

命名空間:: System

組件:: System.Console.dll

組件:: mscorlib.dll

組件:: netstandard.dll

重要

部分資訊涉及發行前產品，在發行之前可能會有大幅修改。 Microsoft 對此處提供的資訊，不做任何明確或隱含的瑕疵擔保。

取得使用者按下的下一個字元或功能鍵。

多載

ReadKey()	取得使用者按下的下一個字元或功能鍵。按下的按鍵會顯示在主控台視窗中。
ReadKey(Boolean)	取得使用者按下的下一個字元或功能鍵。按下的按鍵會選擇性地顯示在主控台視窗中。

ReadKey()

來源:: Console.cs

來源:: Console.cs

來源:: Console.cs

取得使用者按下的下一個字元或功能鍵。按下的按鍵會顯示在主控台視窗中。

public:
 static ConsoleKeyInfo ReadKey();

[System.Runtime.Versioning.UnsupportedOSPlatform("browser")]
public static ConsoleKeyInfo ReadKey ();

[System.Runtime.Versioning.UnsupportedOSPlatform("browser")]
[System.Runtime.Versioning.UnsupportedOSPlatform("android")]
[System.Runtime.Versioning.UnsupportedOSPlatform("ios")]
[System.Runtime.Versioning.UnsupportedOSPlatform("tvos")]
public static ConsoleKeyInfo ReadKey ();

public static ConsoleKeyInfo ReadKey ();

[<System.Runtime.Versioning.UnsupportedOSPlatform("browser")>]
static member ReadKey : unit -> ConsoleKeyInfo

[<System.Runtime.Versioning.UnsupportedOSPlatform("browser")>]
[<System.Runtime.Versioning.UnsupportedOSPlatform("android")>]
[<System.Runtime.Versioning.UnsupportedOSPlatform("ios")>]
[<System.Runtime.Versioning.UnsupportedOSPlatform("tvos")>]
static member ReadKey : unit -> ConsoleKeyInfo

static member ReadKey : unit -> ConsoleKeyInfo

Public Shared Function ReadKey () As ConsoleKeyInfo

傳回

ConsoleKeyInfo

物件，可描述對應到所按主控台按鍵的 ConsoleKey 常數和 Unicode 字元 (如有此項)。 ConsoleKeyInfo 物件也描述在 ConsoleModifiers 值的位元 (Bitwise) 組合中，是否有一或多個 Shift、Alt 或 Ctrl 輔助按鍵與主控台按鍵同時按下。

屬性: UnsupportedOSPlatformAttribute

例外狀況

InvalidOperationException

會將 In 屬性從主控台之外的某些資料流重新導向。

範例

方法最常見的用法 ReadKey() 之一是停止程式執行，直到使用者按下按鍵並應用程式終止或顯示其他資訊視窗為止。下列範例會 ReadKey() 使用方法來等候使用者先按下 Enter 鍵，再終止應用程式。

using System;

public class Example
{
   public static void Main()
   {
      DateTime dat = DateTime.Now;
      Console.WriteLine("The time: {0:d} at {0:t}", dat);
      TimeZoneInfo tz = TimeZoneInfo.Local;
      Console.WriteLine("The time zone: {0}\n",
                        tz.IsDaylightSavingTime(dat) ?
                           tz.DaylightName : tz.StandardName);
      Console.Write("Press <Enter> to exit... ");
      while (Console.ReadKey().Key != ConsoleKey.Enter) {}
   }
}
// The example displays output like the following:
//     The time: 11/11/2015 at 4:02 PM:
//     The time zone: Pacific Standard Time

open System

let dat = DateTime.Now
printfn $"The time: {dat:d} at {dat:t}"

let tz = TimeZoneInfo.Local
printfn $"The time zone: {if tz.IsDaylightSavingTime dat then tz.DaylightName else tz.StandardName}\n"
printf"Press <Enter> to exit... "
while Console.ReadKey().Key <> ConsoleKey.Enter do ()


// The example displays output like the following:
//     The time: 12/28/2021 at 8:35 PM
//     The time zone: Pacific Standard Time

Module Example
   Public Sub Main()
      Dim dat As Date = Date.Now
      Console.WriteLine("The time: {0:d} at {0:t}", dat)
      Dim tz As TimeZoneInfo = TimeZoneInfo.Local
      Console.WriteLine("The time zone: {0}", 
                        If(tz.IsDaylightSavingTime(dat),
                           tz.DaylightName, tz.StandardName))
      Console.WriteLine()
      Console.Write("Press <Enter> to exit... ")
      Do While Console.ReadKey().Key <> ConsoleKey.Enter
      Loop
   End Sub
End Module
' The example displays the following output:
'     The time: 11/11/2015 at 4:02 PM
'     The time zone: Pacific Standard Time

請注意，此方法的 ReadKey 這個多載預設會回應使用者按下主控台的任何可顯示按鍵。若要隱藏它們，請使用 intercept 的 true 引數呼叫 ReadKey 方法。

下列範例會 ReadKey() 使用方法來顯示使用者按下哪一個按鍵的相關資訊。

using namespace System;

void main()
{
   ConsoleKeyInfo cki;
   // Prevent example from ending if CTL+C is pressed.
   Console::TreatControlCAsInput = true;

   Console::WriteLine("Press any combination of CTL, ALT, and SHIFT, and a console key.");
   Console::WriteLine("Press the Escape (Esc) key to quit: \n");
   do 
   {
      cki = Console::ReadKey();
      Console::Write(" --- You pressed ");
      if((cki.Modifiers & ConsoleModifiers::Alt) != ConsoleModifiers()) Console::Write("ALT+");
      if((cki.Modifiers & ConsoleModifiers::Shift) != ConsoleModifiers()) Console::Write("SHIFT+");
      if((cki.Modifiers & ConsoleModifiers::Control) != ConsoleModifiers()) Console::Write("CTL+");
      Console::WriteLine(cki.Key.ToString());
   } while (cki.Key != ConsoleKey::Escape);
}
// This example displays output similar to the following:
//       Press any combination of CTL, ALT, and SHIFT, and a console key.
//       Press the Escape (Esc) key to quit:
//       
//       a --- You pressed A 
//       k --- You pressed ALT+K 
//       ► --- You pressed CTL+P 
//         --- You pressed RightArrow 
//       R --- You pressed SHIFT+R 
//                --- You pressed CTL+I 
//       j --- You pressed ALT+J 
//       O --- You pressed SHIFT+O 
//       § --- You pressed CTL+U }

using System;

class Example
{
   public static void Main()
   {
      ConsoleKeyInfo cki;
      // Prevent example from ending if CTL+C is pressed.
      Console.TreatControlCAsInput = true;

      Console.WriteLine("Press any combination of CTL, ALT, and SHIFT, and a console key.");
      Console.WriteLine("Press the Escape (Esc) key to quit: \n");
      do
      {
         cki = Console.ReadKey();
         Console.Write(" --- You pressed ");
         if((cki.Modifiers & ConsoleModifiers.Alt) != 0) Console.Write("ALT+");
         if((cki.Modifiers & ConsoleModifiers.Shift) != 0) Console.Write("SHIFT+");
         if((cki.Modifiers & ConsoleModifiers.Control) != 0) Console.Write("CTL+");
         Console.WriteLine(cki.Key.ToString());
       } while (cki.Key != ConsoleKey.Escape);
    }
}
// This example displays output similar to the following:
//       Press any combination of CTL, ALT, and SHIFT, and a console key.
//       Press the Escape (Esc) key to quit:
//
//       a --- You pressed A
//       k --- You pressed ALT+K
//       ► --- You pressed CTL+P
//         --- You pressed RightArrow
//       R --- You pressed SHIFT+R
//                --- You pressed CTL+I
//       j --- You pressed ALT+J
//       O --- You pressed SHIFT+O
//       § --- You pressed CTL+U

open System

// Prevent example from ending if CTL+C is pressed.
Console.TreatControlCAsInput <- true

printfn "Press any combination of CTL, ALT, and SHIFT, and a console key."
printfn "Press the Escape (Esc) key to quit: \n"

let mutable cki = Unchecked.defaultof<ConsoleKeyInfo>

while cki.Key <> ConsoleKey.Escape do
    cki <- Console.ReadKey()
    printf " --- You pressed "
    if int (cki.Modifiers &&& ConsoleModifiers.Alt) <> 0 then printf "ALT+"
    if int (cki.Modifiers &&& ConsoleModifiers.Shift) <> 0 then printf "SHIFT+"
    if int (cki.Modifiers &&& ConsoleModifiers.Control) <> 0 then printf "CTL+"
    printfn $"{cki.Key}"


// This example displays output similar to the following:
//       Press any combination of CTL, ALT, and SHIFT, and a console key.
//       Press the Escape (Esc) key to quit:
//
//       a --- You pressed A
//       k --- You pressed ALT+K
//       ► --- You pressed CTL+P
//         --- You pressed RightArrow
//       R --- You pressed SHIFT+R
//                --- You pressed CTL+I
//       j --- You pressed ALT+J
//       O --- You pressed SHIFT+O
//       § --- You pressed CTL+U

Class Example
   Public Shared Sub Main()
      Dim cki As ConsoleKeyInfo
      ' Prevent example from ending if CTL+C is pressed.
      Console.TreatControlCAsInput = True

      Console.WriteLine("Press any combination of CTL, ALT, and SHIFT, and a console key.")
      Console.WriteLine("Press the Escape (Esc) key to quit: " + vbCrLf)
      Do
         cki = Console.ReadKey()
         Console.Write(" --- You pressed ")
         If (cki.Modifiers And ConsoleModifiers.Alt) <> 0 Then Console.Write("ALT+")
         If (cki.Modifiers And ConsoleModifiers.Shift) <> 0 Then Console.Write("SHIFT+")
         If (cki.Modifiers And ConsoleModifiers.Control) <> 0 Then Console.Write("CTL+")
         Console.WriteLine(cki.Key.ToString)
      Loop While cki.Key <> ConsoleKey.Escape
   End Sub 
End Class 
' This example displays output similar to the following:
'       Press any combination of CTL, ALT, and SHIFT, and a console key.
'       Press the Escape (Esc) key to quit:
'       
'       a --- You pressed A 
'       k --- You pressed ALT+K 
'       ► --- You pressed CTL+P 
'         --- You pressed RightArrow 
'       R --- You pressed SHIFT+R 
'                --- You pressed CTL+I 
'       j --- You pressed ALT+J 
'       O --- You pressed SHIFT+O 
'       § --- You pressed CTL+U

備註

方法 ReadKey 會等候，也就是在發出 ReadKey 方法的執行緒上封鎖，直到按下字元或函式按鍵為止。字元或函式按鍵可以與一或多個 Alt、Ctrl 或 Shift 修飾詞鍵結合來按下。不過，按修飾詞鍵本身並不會讓 ReadKey 方法傳回。

視您的應用程式而定，您可能想要搭配 KeyAvailable 屬性使用 ReadKey 方法。

即使使用方法將標準輸入重新導向至檔案 SetIn ，方法 ReadKey 仍會從鍵盤讀取。

另請參閱

適用於

ReadKey(Boolean)

來源:: Console.cs

來源:: Console.cs

來源:: Console.cs

取得使用者按下的下一個字元或功能鍵。按下的按鍵會選擇性地顯示在主控台視窗中。

public:
 static ConsoleKeyInfo ReadKey(bool intercept);

[System.Runtime.Versioning.UnsupportedOSPlatform("browser")]
public static ConsoleKeyInfo ReadKey (bool intercept);

[System.Runtime.Versioning.UnsupportedOSPlatform("browser")]
[System.Runtime.Versioning.UnsupportedOSPlatform("android")]
[System.Runtime.Versioning.UnsupportedOSPlatform("ios")]
[System.Runtime.Versioning.UnsupportedOSPlatform("tvos")]
public static ConsoleKeyInfo ReadKey (bool intercept);

public static ConsoleKeyInfo ReadKey (bool intercept);

[<System.Runtime.Versioning.UnsupportedOSPlatform("browser")>]
static member ReadKey : bool -> ConsoleKeyInfo

[<System.Runtime.Versioning.UnsupportedOSPlatform("browser")>]
[<System.Runtime.Versioning.UnsupportedOSPlatform("android")>]
[<System.Runtime.Versioning.UnsupportedOSPlatform("ios")>]
[<System.Runtime.Versioning.UnsupportedOSPlatform("tvos")>]
static member ReadKey : bool -> ConsoleKeyInfo

static member ReadKey : bool -> ConsoleKeyInfo

Public Shared Function ReadKey (intercept As Boolean) As ConsoleKeyInfo

參數

intercept: Boolean

決定是否要在主控台視窗中顯示按下的按鍵。 true 表示不顯示按下的按鍵；否則為 false。

傳回

ConsoleKeyInfo

屬性: UnsupportedOSPlatformAttribute

例外狀況

InvalidOperationException

會將 In 屬性從主控台之外的某些資料流重新導向。

範例

方法最常見的用法 ReadKey 之一是停止程式執行，直到使用者按下按鍵並應用程式終止或顯示其他資訊視窗為止。下列範例會 ReadKey(Boolean) 使用方法來等候使用者先按下 Enter 鍵，再終止應用程式。請注意，如果使用者按下任何其他按鍵，就不會回應主控台。

using System;

public class Example
{
   public static void Main()
   {
      DateTime dat = DateTime.Now;
      Console.WriteLine("The time: {0:d} at {0:t}", dat);
      TimeZoneInfo tz = TimeZoneInfo.Local;
      Console.WriteLine("The time zone: {0}\n",
                        tz.IsDaylightSavingTime(dat) ?
                           tz.DaylightName : tz.StandardName);
      Console.Write("Press <Enter> to exit... ");
      while (Console.ReadKey(true).Key != ConsoleKey.Enter) {}
   }
}
// The example displays output like the following:
//     The time: 11/11/2015 at 4:02 PM:
//     The time zone: Pacific Standard Time

open System

let dat = DateTime.Now
printfn $"The time: {dat:d} at {dat:t}"

let tz = TimeZoneInfo.Local
printfn $"The time zone: {if tz.IsDaylightSavingTime dat then tz.DaylightName else tz.StandardName}\n"
printf"Press <Enter> to exit... "
while Console.ReadKey(true).Key <> ConsoleKey.Enter do ()


// The example displays output like the following:
//     The time: 12/28/2021 at 8:37 PM
//     The time zone: Pacific Standard Time

Module Example
   Public Sub Main()
      Dim dat As Date = Date.Now
      Console.WriteLine("The time: {0:d} at {0:t}", dat)
      Dim tz As TimeZoneInfo = TimeZoneInfo.Local
      Console.WriteLine("The time zone: {0}", 
                        If(tz.IsDaylightSavingTime(dat),
                           tz.DaylightName, tz.StandardName))
      Console.WriteLine()
      Console.Write("Press <Enter> to exit... ")
      Do While Console.ReadKey(True).Key <> ConsoleKey.Enter
      Loop
   End Sub
End Module
' The example displays the following output:
'     The time: 11/11/2015 at 4:02 PM
'     The time zone: Pacific Standard Time

下列範例會 ReadKey(Boolean) 使用方法來顯示使用者按下的按鍵相關資訊，而不會將該按鍵回應至主控台。

using namespace System;

void main()
{
   ConsoleKeyInfo cki;
   // Prevent example from ending if CTL+C is pressed.
   Console::TreatControlCAsInput = true;

   Console::WriteLine("Press any combination of CTL, ALT, and SHIFT, and a console key.");
   Console::WriteLine("Press the Escape (Esc) key to quit: \n");
   do {
      cki = Console::ReadKey(true);
      Console::Write("You pressed ");
      if ((cki.Modifiers & ConsoleModifiers::Alt) != ConsoleModifiers()) Console::Write("ALT+");
      if ((cki.Modifiers & ConsoleModifiers::Shift) != ConsoleModifiers()) Console::Write("SHIFT+");
      if ((cki.Modifiers & ConsoleModifiers::Control) != ConsoleModifiers()) Console::Write("CTL+");
      Console::WriteLine("{0} (character '{1}')", cki.Key, cki.KeyChar);
   } while (cki.Key != ConsoleKey::Escape);
}
// This example displays output similar to the following:
//       Press any combination of CTL, ALT, and SHIFT, and a console key.
//       Press the Escape (Esc) key to quit:
//       
//       You pressed CTL+A (character '☺')
//       You pressed C (character 'c')
//       You pressed CTL+C (character '♥')
//       You pressed K (character 'k')
//       You pressed ALT+I (character 'i')
//       You pressed ALT+U (character 'u')
//       You pressed ALT+SHIFT+H (character 'H')
//       You pressed Escape (character '←')

using System;

class Example
{
   public static void Main()
   {
      ConsoleKeyInfo cki;
      // Prevent example from ending if CTL+C is pressed.
      Console.TreatControlCAsInput = true;

      Console.WriteLine("Press any combination of CTL, ALT, and SHIFT, and a console key.");
      Console.WriteLine("Press the Escape (Esc) key to quit: \n");
      do {
         cki = Console.ReadKey(true);
         Console.Write("You pressed ");
         if ((cki.Modifiers & ConsoleModifiers.Alt) != 0) Console.Write("ALT+");
         if ((cki.Modifiers & ConsoleModifiers.Shift) != 0) Console.Write("SHIFT+");
         if ((cki.Modifiers & ConsoleModifiers.Control) != 0) Console.Write("CTL+");
         Console.WriteLine("{0} (character '{1}')", cki.Key, cki.KeyChar);
      } while (cki.Key != ConsoleKey.Escape);
   }
}
// This example displays output similar to the following:
//       Press any combination of CTL, ALT, and SHIFT, and a console key.
//       Press the Escape (Esc) key to quit:
//
//       You pressed CTL+A (character '☺')
//       You pressed C (character 'c')
//       You pressed CTL+C (character '♥')
//       You pressed K (character 'k')
//       You pressed ALT+I (character 'i')
//       You pressed ALT+U (character 'u')
//       You pressed ALT+SHIFT+H (character 'H')
//       You pressed Escape (character '←')

open System

// Prevent example from ending if CTL+C is pressed.
Console.TreatControlCAsInput <- true

printfn "Press any combination of CTL, ALT, and SHIFT, and a console key."
printfn "Press the Escape (Esc) key to quit: \n"

let mutable cki = Unchecked.defaultof<ConsoleKeyInfo>

while cki.Key <> ConsoleKey.Escape do
    cki <- Console.ReadKey true
    printf "You pressed "
    if int (cki.Modifiers &&& ConsoleModifiers.Alt) <> 0 then printf "ALT+"
    if int (cki.Modifiers &&& ConsoleModifiers.Shift) <> 0 then printf "SHIFT+"
    if int (cki.Modifiers &&& ConsoleModifiers.Control) <> 0 then printf "CTL+"
    printfn $"{cki.Key} (character '{cki.KeyChar}')" 


// This example displays output similar to the following:
//       Press any combination of CTL, ALT, and SHIFT, and a console key.
//       Press the Escape (Esc) key to quit:
//
//       You pressed CTL+A (character '☺')
//       You pressed C (character 'c')
//       You pressed CTL+C (character '♥')
//       You pressed K (character 'k')
//       You pressed ALT+I (character 'i')
//       You pressed ALT+U (character 'u')
//       You pressed ALT+SHIFT+H (character 'H')
//       You pressed Escape (character '←')

Class Example
   Public Shared Sub Main()
      Dim cki As ConsoleKeyInfo
      ' Prevent example from ending if CTL+C is pressed.
      Console.TreatControlCAsInput = True

      Console.WriteLine("Press any combination of CTL, ALT, and SHIFT, and a console key.")
      Console.WriteLine("Press the Escape (Esc) key to quit: " + vbCrLf)
      Do
         cki = Console.ReadKey(True)
         Console.Write("You pressed ")
         If (cki.Modifiers And ConsoleModifiers.Alt) <> 0 Then Console.Write("ALT+")
         If (cki.Modifiers And ConsoleModifiers.Shift) <> 0 Then Console.Write("SHIFT+")
         If (cki.Modifiers And ConsoleModifiers.Control) <> 0 Then Console.Write("CTL+")
         Console.WriteLine("{0} (character '{1}')", cki.Key, cki.KeyChar)
      Loop While cki.Key <> ConsoleKey.Escape
   End Sub
End Class 
' This example displays output similar to the following:
'       Press any combination of CTL, ALT, and SHIFT, and a console key.
'       Press the Escape (Esc) key to quit:
'       
'       You pressed CTL+A (character '☺')
'       You pressed C (character 'c')
'       You pressed CTL+C (character '♥')
'       You pressed K (character 'k')
'       You pressed ALT+I (character 'i')
'       You pressed ALT+U (character 'u')
'       You pressed ALT+SHIFT+H (character 'H')
'       You pressed Escape (character '←')

備註

intercept如果參數為 true ，則會攔截已按下的按鍵，而不會顯示在主控台視窗中，否則會顯示已按下的按鍵。

視您的應用程式而定，您可能想要搭配 KeyAvailable 屬性使用 ReadKey 方法。

即使使用方法將標準輸入重新導向至檔案 SetIn ，方法 ReadKey 仍會從鍵盤讀取。

另請參閱

適用於

共用方式為

Console.ReadKey 方法

定義

多載

ReadKey()

傳回

例外狀況

範例

備註

另請參閱

適用於

ReadKey(Boolean)

參數

傳回

例外狀況

範例

備註

另請參閱

適用於

其他資源